Today Apple retail unit sold me Airport Time Capsule. Now trying to install on my Mac which runs OSX10.6.8. Seems I should have newer OSX and Airport Utility version. What can I do please?

Today Apple retail unit/shop in sold me Airport Time Capsule. Now trying to install on my 21 inch iMac which runs OSX10.6.8. Seems I should have newer OSX and also newer Airport Utility version (mine is 5.6.1). What can I do, please? So much looking forward to using Time Capsule. It is not at all readable on box. Now with a magnified glass I can just about make out the installation requirements printed in tiny print at the bottom/base of the box! I have tried software update etc etc and to download Airport Utility update from Apple website. This was unsuccessful because of OSX, I gathered. Appreciate any similar experience and how it was resolved. Thank you. Tr

You need OS X 10.7.5 or later. Most likely you can upgrade OS X on your iMac. You already have 10.6.8 and access to the App Store. If your computer qualifies to run Mavericks, then that is what you would upgrade to, otherwise, you would upgrade to Lion.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Similar Messages

I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8 Can't seem to download the upgraded software. Can anyone help?

Please review the System Requirements for the Time Capsule.
http://www.apple.com/airport-time-capsule/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

I have repeatedly tried to install flashplayer on Mac 10.5.8 with no success. I have followed the online help document line by line and tried Mike M's suggestions to no avail. I now have no flashplayer and each time it continues to report a failure to lau

I have repeatedly tried to install flashplayer on Mac 10.5.8 with no success. I have followed the online help document line by line and tried Mike M's suggestions to no avail. I now have no flashplayer and each time it continues to report a failure to launch even when reset. the error report on apple state a breakpoint and unknow required load command whatever that is....HELP!

Hi Katie,
Flash Player is no longer supported on OS X 10.5.8. If you try to install one of the latest versions, it'll just terminate. You need Flash Player 10.3.183.90 (released 7/9/2013), which is the last version supported on OS X 10.5.8. The installer file is in this zip package, http://fpdownload.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive _mac_only.zip.
If you have an Intel machine, you may want to consider upgrading to 10.9 (free upgrade) so that you can install the latest, most secure, version of Flash Player.
Maria

After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

Download 9.1 and 9.2.3 updates and install them

I have Lightroom 4 on disc which is installed on my Mac desktop. I want to use it on a new MacBook with no disc drive. Can I install it by download using the serial number? How?

I have Lightroom 4 on disc which is installed on my Mac desktop. I want to use it on a new MacBook with no disc drive. Can I install it by download using the serial number? If so< how?

1. Go to the following website and download the last version of Lightroom 4:Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4.1
2. Run the installation package to install Lightroom.
3. Use your existing serial number to activate the program.

Replaced Airport Extreme router with Airport Time Capsule-now printer won't connect to network

I had no issues with connecting to the Airport Extreme. I have recently replaced the Extreme with an Airport Time Capsule (the new one that is 802.11 ac). All of my other products were able to detect the WIFI router and connected with no issue once I entered the password. However, the HP 2710 finds the WiFi router, allows me to select it but when I enter my password and click OK, it comes back after several minutes saying that it can't connect to the network. I checked the IP address and it's all 0.0.0.0 - it's won't establish an IP address either.

Hello @theros1093 , and welcome to the HP Forums, I hope you enjoy your experience!
I understand that you're having issues connecting to your router. I would like to help!
I'd recommend powering down your computer. Once it's powered down, go to the printer and select Setup , select Network, and select. Restore Network Defaults. Power down the printer. Once it's all shut down, unplug the router power for 60 seconds, and plug it back in. After it broadcasts, power on the printer and computer, and reconnect to the wireless network.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I need to change my account information so my devices will sync together but i can log onto my old itunes account because i dont have that email and forgot that password, what can i do?

i need to change my account information so my devices will sync together, however i do not have my email my ipod account is linked to and i dont remeber the password. In short i need to remove my ipod from my old itunes account but i cant log on to that old account. What can i do?

You'll need to reset the password that account then before you can transfer these purchases to your iTunes library and your iPhone.
https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot
If that doesn't work, you'll need to contact Apple support directly by phone and have them walk you through resetting the account information.
B-rock

Vista upgrade and XP full version, what can I do?

I would like to install Vista on a new bootcamp (snow leopard on mac mini), but my copy of Vista is an upgrade. I have a full version of XP, and an upgrade version of Vista. Do I have to install XP first, or can I use the upgrade and just pop in the XP disc when it prompts? I have done this with another PC that had a full 98 and an upgrade XP, but that wasnt a mac. I also am concerned since I may upgrade to Lion very soon, and dont have the money to get both lion and win 7, that I will be stuck if I try to do a clean install of Lion, I may lose the ability to run bootcamp with my current Windows discs.
Thanks for any help,
Ken

Reply to the other post.

HT6030 hello I did the mavericks update 10.9.2 but I still have problems with my gmail accounts ... impossible receive and send messages! what can I do please ?.... thanks

Thanks to help me please

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

I get double the amount od gmail notifications in notification -- both from new mail and all mail. What can I do?

I get double the amount of gmail notifications on my iPhone 4 or iPad 2 using iOS 5. Any ideas how to fix?

I Think that you have system sounds muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

I can't get my airport time capsule to connect to the internet

I can't get my new airport time capsule to connect to the internet. It works fine with my linksys router

We cannot help with that amount of info..
What internet type and modem do you have? Exact modem make and model may help.
Is the linksys router also the modem? You do know there is no modem in the TC?
How is the Linksys authenticating if it is plugged into the modem??
If cable did you shut down the cable modem for at least 20min to change the router.. this is always required with cable system.. often the time is longer.. one hour or overnight even.

AirPort time capsule, remote access?

I can not acess my AirPort time capsule from outside home network. It works perfectly inside the home network, but is not accessable remotly (From outside my home net) I can see the time capsule as a shared unit in finder, and the cloud is turned on, but I can still not open th disk from outside home. Every unit is up to date!
Can any please help me!

Between the internet modem and APTC there is also a router. (All the items are wired)
I can see the APTC from the outside world, but can not access it.
Use the method of AFP port forwarding.
This is simple.. the TC must be in bridge..
Map port 548 TCP to the TC.. and ensure the TC is static IP so the port forward is always correct.
Then from the other site you simply access it via AFP.. in Finder go, connect to server, type
AFP://PublicIPaddress
Remember the security here is important so use a decent length disk password.
Read https://discussions.apple.com/docs/DOC-3413
Method 3 for more details.

How to use AirPort Time Capsule 2TB as an external storage hard drive only?

I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.

The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

Airport time capsule 2TB not emitting 802.11ac to my Late 2013 MBPr

PHY Mode: 802.11n
this is displayed when I'm connected to the Airport Time Capsule from my late 2013 MacBrook Pro Retina 15"
My laptop is 802.11ac compatible however the connection to the airport seems to only connect in 802.11n
I've connected Airport to my Verizon Actiontec Mi424WR and have disabled wifi on the actiontec.
Any way I can modify the connection to connect at 802.11ac???

Please don't post in both areas.. we see posts in both..
Airport TC not emitting 802.11ac

Today Apple retail unit sold me Airport Time Capsule. Now trying to install on my Mac which runs OSX10.6.8. Seems I should have newer OSX and Airport Utility version. What can I do please?

Similar Messages

Maybe you are looking for