Today() generating error when used in an expression

I am using today() as part of an expression to generate a conditional running total. It is producing an error in the report output.
=RunningValue(
IIF(
(not(IsNothing(Fields!PPAP_Sent_Date.Value)) and (Fields!PPAP_Sent_Date.Value <= Fields!PPAP_Request_Date.Value)
or(isnothing(Fields!PPAP_Sent_Date.Value) and (Fields!PPAP_Request_Date.Value > Today())))
,Fields!Item.Value,0
),sum,"Month" )

Are you sure the Fields contain a valid date value?
try and see if this works
=RunningValue(
IIF(
(IsDate(Fields!PPAP_Sent_Date.Value) And IsDate(Fields!PPAP_Request_Date.Value) And (Fields!PPAP_Sent_Date.Value <= Fields!PPAP_Request_Date.Value))
or(isnothing(Fields!PPAP_Sent_Date.Value) and IsDate(Fields!PPAP_Request_Date.Value) And (Fields!PPAP_Request_Date.Value > Today())))
,Fields!Item.Value,0
),sum,"Month" )
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

FSG Error when using segment override

Hi,
I have the following error when using segment override :
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RGRARG module: Financial Statement Generator
+---------------------------------------------------------------------------+
Current system time is 26-APR-2012 11:17:22
+---------------------------------------------------------------------------+
Starting Program RGRARG.
Arguments are:
    0   RGRARG                    - RGRARG
    1   username/password         - username/password
    2   0                         - 0
    3   Y                         - Y
    4   Data Access Set ID        - 1030
    5   Chart of Accounts Id      - 101
    6   ADHOC Prefix              - FSG-ADHOC-
    7   Industry                  - C
    8   Flex Code Id              - GLLE
    9   Default Ledger ID         -
   10   Report ID                 - 1011
   11   Row Set ID                - 3461
   12   Column Set ID             - 1018
   13   Period of Interest        - SEP-11
   14   Unit of Measure ID        - IDR
   15   Rounding Option           - C
   16   Override Values           - ----DIV3---000000
   17   Content Set ID            -
   18   Row Order ID              -
   19   Report Display Set ID     -
   20   Output Option             - R
   21   Exceptions Flag           - N
   22   Miniumum Display Level    -
   23   Effective Date            -
   24   Parameter Set ID          - 1011
   25   Maximum Page Length       - 58
   26   Sub-Request Run ID        - -998
   27   Application Shortname     - SQLGL
Message level is: Normal
rgrini() 26-APR-2012 11:17:22 rgrini.build_per_arr:
Query for period set name from GL_ACCESS_SETS
SELECT period_set_name
FROM GL_ACCESS_SETS
WHERE access_set_id = 1030
rgrini.build_per_arr:
period set name from GL_ACCESS_SETS:
ACCOUNTING
rgrini.build_per_arr:
Query for period names from GL_PERIODS
SELECT period_name,
    to_number(to_char(end_date,'YYYYMMDD'))
FROM GL_PERIODS
WHERE period_set_name = :p_value
ORDER BY NLSSORT(period_name,'NLS_SORT=BINARY') ASC
control->report_id = 1011
control->row_set_id = 3461
control->column_set_id = 1018
control->row_order_id = 0
control->content_set_id = 0
control->display_set_id = 0
control->parameter_set_id = 1011
control->resp_lvl = 0
control->round_option = C
control->output_option = R
control->excp = FALSE
control->sub_req_run_id = -998
control->appl_id = 101
control->id_flex_code = GLLE
control->ldg_val_set_id = 1010673
control->ledger_id = 0
control->ledger_name =
control->ledger_currency =
control->access_set_id = 1030
control->security_segnum = 0
control->per_cnt = 162
control->runtime_currency = IDR
control->resp_id = 50386
control->resp_appl_id = 101
control->enforce_security = TRUE
control->sec_rules = NULL
control->reduced_ranges = NULL
control->num_reduced_ranges = 0
control->max_char_width = 1
control->total_num_cols = 0
control->page = NULL
<< rgrini() 26-APR-2012 11:17:22
rgranl() 26-APR-2012 11:17:22Current date and time: Thu Apr 26 11:17:22 2012
rgrgsa() 26-APR-2012 11:17:22
<< rgrgsa() 26-APR-2012 11:17:22
rgrdrs() 26-APR-2012 11:17:22req_id_str =
809694
rgrdpg.rgrdpg: Unable to read value for profile option RG_DEBUG_ON..
rgrprt.rgrprt: Defaulting value for profile option RG_DEBUG_ON to FALSE..
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 1018
<< rgrgas() 26-APR-2012 11:17:22
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 3461
<< rgrgas() 26-APR-2012 11:17:23
rgrgrp() 26-APR-2012 11:17:23
<< rgrgrp() 26-APR-2012 11:17:23
COA Structure :
Segment: LEDGER_SEGMENT : Ledger
Segment: SEGMENT1 : COMPANY
Segment: SEGMENT2 : ACCOUNT
Segment: SEGMENT3 : PRODUCT
Segment: SEGMENT4 : DIVISION
Segment: SEGMENT5 : DEPOT
Segment: SEGMENT6 : COST CENTER
Segment: SEGMENT7 : FUTURE
Segment value security is enforced for Financial Statement Generator reporting.
rgrrsr() 26-APR-2012 11:17:23
rgrrsf() 26-APR-2012 11:17:23
<< rgrrsf() 26-APR-2012 11:17:23
<< rgrcrl() 26-APR-2012 11:17:23
<< rgrrsr() 26-APR-2012 11:17:23
rgrpsr() 26-APR-2012 11:17:23The COMPANY segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COMPANY values will be processed.
The ACCOUNT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All ACCOUNT values will be processed.
The PRODUCT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All PRODUCT values will be processed.
The DIVISION segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DIVISION values will be processed.
The DEPOT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DEPOT values will be processed.
The COST CENTER segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COST CENTER values will be processed.
The FUTURE segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All FUTURE values will be processed.
<< rgrpsr() 26-APR-2012 11:17:23
rgrdrs.rgrdrs: Getting value for profile option EXPAND_PARENT_VALUE equal No.
PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found
<x get_def_ldgs() 26-APR-2012 11:17:24
<x get_def_ldgs() 26-APR-2012 11:17:24
rgrgax() 26-APR-2012 11:17:24 rgrgax:get_axes
Starting axis query.
rgumsg:
fdnwsc() is used by default
rgrgax.get_conts - Prepare:
ORA-00936: missing expression
Current date and time: Thu Apr 26 11:17:24 2012
Entered sauulc with code 1 from line 3333 of file rg/lib/rgrgax.c.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??
please advise
thx

I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??If none of the docs help, please log a SR.
Thanks,
Hussein

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

Weblogic 9.2 error when using spring framework and taglibs.

I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AM

The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM

Help me, please. generate error when i run web application

i want you help me. I run web application on local window very well. I deploy web application success on Linux. But it generate error when run it. My web application use : struts framework, hibernate framework, tomcat 4.1, PostgreSQL 7.3 Database.
why error generate when i run web application ?
Thank you very much
WARN 13-09-2006 15:51:41,674 org.apache.commons.beanutils.MethodUtils (MethodUtils.java:583) - Cannot use JVM pre-1.4 access bug workaround die to restrictive security manager.
WARN 13-09-2006 15:53:14,880 net.sf.hibernate.cfg.Environment (Environment.java:529) - could not copy system properties. System properties will be ignored.
WARN 13-09-2006 15:53:16,201 net.sf.hibernate.cfg.SettingsFactory (SettingsFactory.java:107) - Could not obtain connection metadata
org.postgresql.util.PSQLException: Something unusual has occured to cause the driver to fail. Please report this exception.
     at org.postgresql.Driver.connect(Driver.java:209)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:140)
     at net.sf.hibernate.connection.DriverManagerConnectionProvider.getConnection(DriverManagerConnectionProvider.java:101)
     at net.sf.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:84)
     at net.sf.hibernate.cfg.Configuration.buildSettings(Configuration.java:1160)
     at net.sf.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:794)
     at com.canhph.vietnamjob.db.HibernateSessionFactory.currentSession(HibernateSessionFactory.java:48)
     at com.canhph.vietnamjob.dao.company.DAOJob.getHotJob(DAOJob.java:122)
     at com.canhph.vietnamjob.bussiness.company.BussinessJob.getHotJob(BussinessJob.java:74)
     at com.canhph.vietnamjob.actions.home.PortalAction.execute(PortalAction.java:230)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1164)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:397)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Unknown Source)
     at org.apache.catalina.core.ApplicationFilterChain.access$0(Unknown Source)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(Unknown Source)
     at com.canhph.vietnamjob.common.FilterCharacterEncoding.doFilter(FilterCharacterEncoding.java:53)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Unknown Source)
     at org.apache.catalina.core.ApplicationFilterChain.access$0(Unknown Source)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(Unknown Source)
     at org.apache.catalina.core.StandardWrapperValve.invoke(Unknown Source)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
     at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
     at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
     at org.apache.catalina.core.StandardContextValve.invoke(Unknown Source)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
     at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
     at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
     at org.apache.catalina.core.StandardContext.invoke(Unknown Source)
     at org.apache.catalina.core.StandardHostValve.invoke(Unknown Source)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(Unknown Source)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
     at org.apache.catalina.valves.ErrorReportValve.invoke(Unknown Source)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
     at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
     at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
     at org.apache.catalina.core.StandardEngineValve.invoke(Unknown Source)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
     at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
     at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
     at java.security.AccessController.checkPermission(AccessController.java:401)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
     at java.lang.SecurityManager.checkConnect(SecurityManager.java:1023)
     at java.net.InetAddress.getAllByName0(InetAddress.java:1000)
     at java.net.InetAddress.getAllByName0(InetAddress.java:981)
     at java.net.InetAddress.getAllByName(InetAddress.java:975)
     at java.net.InetAddress.getByName(InetAddress.java:889)
     at java.net.InetSocketAddress.<init>(InetSocketAddress.java:114)
     at java.net.Socket.<init>(Socket.java:124)
     at org.postgresql.core.PGStream.<init>(PGStream.java:58)
     at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:77)
     at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:65)
     at org.postgresql.jdbc2.AbstractJdbc2Connection.<init>(AbstractJdbc2Connection.java:117)
     at org.postgresql.jdbc3.AbstractJdbc3Connection.<init>(AbstractJdbc3Connection.java:30)
     at org.postgresql.jdbc3.Jdbc3Connection.<init>(Jdbc3Connection.java:24)
     at org.postgresql.Driver.connect(Driver.java:195)
     ... 54 more
Message was edited by:
balzacvietnam

Sounds like the java version on your Linux machine is not working with the PostgreSQL JDBC driver.
Try updating your JVM on the Linux server.

Help: Error when using LSMW (Recording Object Type)

Dear all,
I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
I have recorded the transaction MM01 and the source structure and data mapping.When dealing
with "Specify Files",the error comes out with message
--> "File Name 'Converted Data':Max.45 Characters:Remaining saved".
and the subsequent steps cannot be maintained due to the error.

Alex,
The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv as Project_Subproject_Object.lsmw.conv
System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
Just rename the file such that it is with in the 45 charcter limit....you will be fine
Hope this helps
Vinodh Balakrishnan

Getting the -18001 error when using TestStandLVRTS

I have developed my TestStand (v2.0) test sequences based on the LabVIEW adaptor. Everything runs well with the labVIEW development system. However, when I switch the labVIEW adaptor to the LabVIEW runtime server such as the TestStandLVRTS, I got the -18001 Error from the TSAPI with the message of "Unable to launch 'TestStandLVRTS.Application' ActiveX automation server".
I have tried all the suggested fixes described in the article "-18001 Errors When Using TestStand and LabVIEW". The error still persists.
Could you help me to solve this problem? Without this problem being solved, we will not be able to deploy our test sequences.

Hello HCL -
Below I have attached my version of the 6.1 built TestStandLVRTS folder. If you are using the build file provided in this folder when re-compiling your run time server, you should be seeing the .tlb file being auto-generated. Verify that you are using the build file that ships with TestStand and that under application settings that you have the 'Enable ActiveX server' checkbox enabled.
There are no known bugs with LabVIEW 6.1 related to problems launching the TestStandLVRTS.exe, and given the good behavior I have seen between the two products here on the test machines, I am interested in seeing first if the problem lies with the executable and then we will try and troubleshoot your particular system.
--Regards
Elaine R.
National Instruments
http://www.ni.com/ask
Attachments:
LabVIEW.zip ‏227 KB

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

Java Heap Error when using Stateless Session Timer Bean deployed in Oracle

Hi,
Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
I had tried using -Xms / -Xmx options (upto 1 GB).
The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
If anyone has encountered such problem; would appreciate if you could share the solution.
Regards, Vidyadhar

Hi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
     at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
     at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     ... 9 more
Any idea?
Thx Auro

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

Errors when using source2wsdd

Any help will be greatly appreciated.
I got the following errors when using the ant task source2wsdd:
[source2wsdd] classpath C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogi
c81\server\lib\webservices.jar
[source2wsdd] source2wsdd: Cannot find doclet class weblogic.webservice.tools.dd
gen.ServiceGen
[source2wsdd] 1 error
[ant] Exiting C:\project\DCII\ant\batch-build.xml.
BUILD FAILED
C:\project\ant\build.xml:67: The following error occurred while executing this l
ine:
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:388)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Caused by: C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
... 10 more
--- Nested Exception ---
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Total time: 8 seconds
The following is the major parts from my ant build file:
<path id="webservice.classpath">
<pathelement location="${wls.home.dir}/server/lib/weblogic.jar"/>
<pathelement location="${wls.home.dir}/server/lib/webservices.jar"/>
</path>
<target name = "initialize">
<mkdir dir="${build.dir}"/>
<mkdir dir="${class.dir}"/>
<mkdir dir="${dist.dir}/${deploy.env}"/>
<mkdir dir="${jdocs.dir}"/>
<mkdir dir="${weblogic.application.dir}"/>
<taskdef name="call"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.Call"/>
<taskdef name="if"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.IfTask"/>
<taskdef name="servicegen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask"/>
<taskdef name="clientgen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask"/>
<taskdef name="source2wsdd"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD"/>
<taskdef name="wldeploy"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.management.WLDeploy"/>
</target>
<target name="buildEar"
depends="buildCommonJar, ejbc">
<echo message ="[${module.name}] Checking to see if ${ear.file} is up to date...[${appc.classpath}]" />
<source2wsdd
javaSource="${webserviceServer_src_dir}/HelloWorld.java"
ddFile="${descriptor.dir}/webservice/web-services.xml"
serviceUri="/HelloWorld">
<classpath refid="webservice.classpath" />
</source2wsdd>
<echo message ="[Done with buildEar]" />
</target>

Did you ever resolve this?

Error When Using Class :(

Hey,
Class:
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Main extends MovieClip
        public var enemyA:Array = [];
        public var birdA:Array = [];
        public var rowNum:int = 2;
        private var gap:int = 100;
        private var obj_no = 2;
        public var enemy1:mychar = new mychar();
        public var TheBird:BirdChar = new BirdChar();
        public function Main()
            // constructor code
            createEnemyF();
            createBirdF();
            this.addEventListener(Event.ENTER_FRAME,loopF);
        public function createEnemyF()
            for (var i:int = 0; i < rowNum; i++)
                for (var j:int = 0; j < obj_no; j++)
                    enemy1.x = Math.random() * stage.stageWidth - enemy1.width;
                    enemy1.y = - i * (gap + enemy1.height) - 30.65;
                    enemyA.push(enemy1);
                    addChild(enemy1);
        public function createBirdF() {
            TheBird.x = 270.95;
            TheBird.y = 350.95;
            birdA.push(TheBird);
            addChild(TheBird);
        public function loopF(event:Event) {
            updateEnemyPositionsF();
            updateBirdPositionsF();
            hitTestF();
        public function updateEnemyPositionsF() {
            enemy1.y += 2;
        public function updateBirdPositionsF() {
            TheBird.x = mouseX;
        public function hitTestF() {
            if(TheBird.hitTestObject(enemy1))
                gotoAndPlay(5);
                trace('The Bird Hit Enemy 1');
This conflicts and causes this error:
1046: Type was not found or was not a compile-time constant: MouseEvent
^ ^ Code repeats to all of my event listeners
Thanks for your time.

Thanks, i thought it might be this because of previous problems but i seen i already had : import flash.events.Event; so i thought that would be OK!
Second Error:
1180: Call to an undefined method Timer.
I think this is the same sort of thing but what to import to fix this?
So far these are my imports:
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.events.TimerEvent;
Thanks for helping.
Date: Thu, 3 Nov 2011 05:36:22 -0600
From: [email protected]
To: [email protected]
Subject: Error When Using Class
    Re: Error When Using Class
    created by markerline in Flash Pro - General - View the full discussion
Looks like you imported events.Event but not events.MouseEvent (or some similar syntax) basically you must import MouseEvents separately from other Events.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4005227#4005227
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4005227#4005227. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Today() generating error when used in an expression

Similar Messages

Maybe you are looking for