Today i bought a preowned ipod touch 2nd gen and i restarted it so i could go on app store on my account and that so i go on settings and restart and erase everything and now it comes up with a usb pointing at the itunes logo what do i do
today i bought a preoned ipod touch 2nd gen and i restarted and erased everything so i can go on app store and that and now it just shows a picture of a usb pointing at the itunes logo what do i do
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
Similar Messages
-
I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this? I don't know what operating system it runs, or what year it was manufactured, it is a chrome one.
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
my ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else. It won't switch on beyond that. Please help!
Sounds like your iPod is in restore mode. Connect it to iTunes. iTunes will pop a little message up saying that your iPod is in restore mode and asking you if you want to restore it, click yes. Your iPod will restore to factory settings and you will be given the chance to restore from a backup. You can do this or set it up as a new iPod.
Here is Apple's page on restoring your iPod.
http://support.apple.com/kb/ht1414
Hope that helps. -
My iPad is. "Frozen"... Graphic of charger cord connector with an arrow pointing to the iTunes logo. This happened when I was updating iOS software.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
How do I fix my phone? I went to dowload ios 7.0.4 and it went to this blank screen wih a charger pointing up to the iTunes logo.
http://support.apple.com/kb/HT1808
you may have to do those steps a few times. -
My iPod is showing a USB cable with an arrow pointing to the iTunes logo
My iPod is showing a USB cable pointing to an iTunes logo, this happens everytime i turn it on, i can get nothing else. I have
done all the diagnostics and i have reset everything, nothing makes it work. It will not sync to the computer, but i know there is nothing wrong with my computer because i have an iPod nano which works fine. Please help.Hey,
So you plug it into the computer with itunes open and nothing happens?
Make sure your iTunes is upto date and try again.
Jason -
please do answer my concern. i know apple wont let this kind of crap.
The bad news is that all new apps created with Apple's latest iOS SDK require devices to be running iOS 4.3 or greater. This means that all first and second generatio iOS devices will not get any new app updates. I'm afraid you're going to see less and less available apps on the App Store for your device as developers update their apps for iPhone 5 screen (which will drop compatibility for iOS 4.2)
Your only option really is to sell that iPod touch and get a newer one. -
I just bought a used iPod Touch, 2nd gen. How do I create a new Apple ID. I have an iTunes account.
I just bought a used 2nd generation iPod Touch. The previous owner did not delete his Apple ID. I don't know his password. Meanwhile, I have a Apple ID and password from my previous Nano and iTunes library. How do I hook my new iPod Touch with my existing account? Currently, I cannot access Apps store on Touch. Help!
Sign out of the Touch and then sign in Using Your Apple ID...
No need to create a New ID... -
i went to plug in into iTunes and it would not allow me to fix it by putting into recovery mode.I tried everything called apple care that did not help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried plugging it into my laptop and it wasnt syncing. so im not sure what to do now.
- Try a reset and then connect to computer and restore if you can.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- If the screen still shows something, let the battery fully drain. After charging for an hour try the reset and restoe again. -
Can anyone PLEASE help me!!? I didn't realize that would be my title so, bear with me hear and read the title!!^^
The screen is telling you to connect the iPod to your computer and restore via iTunes. What happens when you do that?
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
i have tried to restart the phone, didnt work. anyone else have this problem?
- Try manually placing the iPod in Recovery mode and then try a restore.
- Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod off, let the battery fully drain. After charging fro at least an hour try again. -
My iPhone turned off for no reason and wont turn back on but it will show me the apple logo then turn off again. I have connected it to the computer and attempted to reset it but it turns off before it can reset.
Ok. I have doen some research and I have some things for you to try.
First, what version iPhone do you have?
Second, Try holding the home+sleep button for ten seconds and you should see the apple logo come up.
Are you using your iPhone with a Mac or PC?
Have you upgraded to iTunes 11? -
Anyone got the new iPod touch 2nd gen to work with the fatman itube dock???
Hi all,
Recently for christmas I've bought a new iPod touch 2nd gen and it's awesome, everything is great about it - in my opinion; except for the fact that I tried to dock it on the fatman itube docking station and found it not to work. Before I used it I was aware that the 2nd gen is unable to charge on the dock however I didn't expect the speakers not to work too. All that happens is a message on the ipod comes up saying unable to charge with this accessory but doesn't put any sound output into the fatman, it just sits there blasting out it's own quiet internal speaker, and also strangely the remote DOES work too???
I've read on the net that maybe resetting the ipod by holding the home+stand-by switch for 10 secs but this resets and does not fix the problem...
There are many photos on the fatman website showing a ipod touch docked so it seems to be sold as working with it but who's to blame for this fault? Apple or fatman?? And does anybody know of a fix for it?
Also I tried my mums ipod nano with the fatman - works fine, and my firmware on the ipod touch is nice and up to date with version 2.2 so I can't see anything else I can do. This was my christmas & birthday present and at the moment I'm quite annoyed that all I can do to it is stick a mini jack in the headphone socket - not ideal since there's no video output or remote control that way!!!
Please give advice if there is any out there,
Thanks,
Mrghostie.This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing. -
my ipod touch is stuck on a screen showing a photo of the white plug with an arrow pointing to the itunes logo. i can't get it to work. how do i fix this?
If still prpblem
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Report to Identify Parked Invoices and Invoices without PO#
Experts: Is there a report out there that will provide me 1. All Parked Invoices 2. All Parked Credit Notes 3. All invoices without ref to PO# Thanks! Rahul
-
Does anyone know if ES89 is available, just not public? Trying to setup Digital Networking or Unity to Unity Connection Interchange and understand that for Unity 5 you need ES89. http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/compatibili
-
Dear all , Can anyone tell me how to create letter of credit for vendor . like the one create for customer via T.code VX11N thank's
-
JMS adapter :MQ series : sun.io.MalformedInputException
Hi we are using SAP XI to read file from MQ Queues.we are getting error in our sender communication channel : Error converting Message : sun.io.MalformedInputException failed to get message from MQ queue Code : MQJMS2002. till now steps taken :- - c
-
Items (and even pages) disappearing to the pasteboard in InDesign CC? for no rea
Hi. I have notice on large documents that for no apparent reason images and even whole pages are being placed on the pasteboard. In relation to the page items, the image box stays put but the image is sent onto the pasteboard. When I click to centre