Today I tunes recomended I update my computer. once i did my Itunes no longer works and i recieve an error message

After updating I tunes I now receive this error message .
"This Application has failed to start because MSVCR80.dll was not found re-installing the application may fix this procedure."
I have uninstalled  I Tunes and re-installed it, it now also says that my library is not recognizable because it is an older version of I tunes.
What do I need to to do to repair this?

See the user tip: https://discussions.apple.com/docs/DOC-6562

Similar Messages

  • After trying to install iTunes update, which did not succeed fully, iTunes is no longer working and I get the error message "runtime error ... R6034 .. an application has made an attempt to load the C runtime library incorrectly ..."What can I do to solve

    iTunes is installed on our Acer laptop with Windows Vista and has worked fine so far (connecting iPad, iPhone and some iPods). Who can help me make iTunes work again? Thanks for your help in advance.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • My username (email address) has changed. Apps that I purchased with the old username ca not be updated as the password from the old username no longer works and apple can not send me info to an addres that no longer exists. What can I do?

    My username (email address) has changed. Apps that I purchased with the old username ca not be updated as the password from the old username no longer works and apple can not send me info to an addres that no longer exists. What can I do?

    Try here...
    Frequently Asked Questions About Apple ID

  • Trying to update from mac os 10.5.2 to 10.5.8 and i get an error message saying it cannot validate the package

    Had to restore my macbook to original operating system that came with the computer when purchased in the spring of 2008. I am now trying to complete a software update to mac os x 10.5.8 and i get an error message stating "The installer could not validate the contents of the "MacOSXUpdCombo 10.5.8" package. Contact the software manufacturer for assistance.

    That's usually a bad download.

  • HT1923 I have iTunes installed on a PC running Windows 7. When I downloaded an iTunes update, iTunes wouldn't open, and diplayed a "system error" message: MSVC80.dll file missing. Does this indicate a Windows 7 problem? Is it fixable?

    Unable to open iTunes on PC running Windows 7. Error message: MSVC80.dll missing. ITunes had been working normally until I downloaded an update, and the error message appeared.

    Hello bhillblom,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I'm updating iTunes on my PC and keep getting an error message.

    message says to contact adminitrator, unable to update itunes

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • I did the recent update and now itunes no longer works and I get a MobileMe error in Outlook

    I can't get Itunes to work since the latest upgrade and I get an error in outlook about MobileMe.   I tried to reinstall Itunes but there is an error thaere and the program aborts.

    MobileMe was discontinued at the end of June 2012. The control panel should be removed if still present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
    tt2

  • I tried to update itunes on my pc and received the following error messages:

    1st error message
    ITunesHelper.exe -Unable to locate component
    This application has failed to start because MSVCR80.ddl was not found.
    Re-installing the application may fix the problem.
    2nd error message
    APSDaemon.exe - Unable to Locate Component.
    Same
    3rd -6th message
    HelperMsgListenerWnd: iTunesHelper.exe Unable to Locate Component
    Same
    I have tried reinstallingitunes several times with the same result.
    Any ideas
    Thanks

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I've updated to FF26 and get the follow error message "Secure Connection Failed" why is that?

    ever since I've updated to FF26 some of the sites won't come up and show the following error message:
    Secure Connection Failed
    An error occurred during a connection to www.facebook.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
    it does not happens all the time but most of the times.
    this also occurs on google.com, twitter.com and many more.
    what to do?

    Do you have the option to turn off the feature of Kaspersky scanning your SSL traffic? Usually that can be turned off (e.g., in ESET and BitDefender).

  • Since updating to 3.6.15 today, back button no longer works and FF doesn't remember URLs

    Since updating to 3.6.15 today, back button no longer works and FF doesn't remember URLs. Not just that memory of previous URLs got wiped out, it still doesn't remember the ones I've typed in since I updated. And No back button, it's really hard to use.
    I went thru all the settings and could not find a way to fix this problem. What is up? I've never had this happen in any version of IE, FF, or Chrome.
    Can I get back previous version? Until then, it's Chrome and IE for me.
    I'll be happy to delete any plug-ins if it will make this problem go away.
    THANKS in advance!

    Thanks. This didn't solve te problem but it seemed to have solved itself. all of a sudden it started working properly, without me even closing FF and starting it up again. Thanks Cor-el, if it happens again I'll try your solution.

  • HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
    Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
    As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
    Is there a way to resolve this issue?

  • TS1717 Installed the iTunes 10 update on my computer (Windows 7).  iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help.  Tried setting up a new user, no help.  What's wrong??

    Installed the iTunes 10 update on my computer (Windows 7).  iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. What's the fix??

    Hi sahgin,
    The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
    I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

  • Itunes no longer works after latest update

    I updated the latest version of iTunes. Now, it no longer works. Then my computer told me to update the latest version, so tried again, but again it didn' work. So in uninstalled iTunes and tried to install it again. It didn't work. I even tried with an older update after I had deleted the latest one and it didn't work. Now my computer tells me that some file or stuff was missing.
    Thanks for any help!

    ...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
    Please help me!

  • HT1222 I installed the most recent ITunes update after which Itunes no longer worked.. I received an error message   Error 7  Windows 193.  I did a system restore to eliminate the update.

      Apple support had not responded to my requests for clarification.  The update corrupted both ITunes and Office Outlook mobileme.  The error message when I tried to start up I Tunes was Error 7 Windows 193.  I un installed I Tunes and re installed the latest ver and encountered the same error message.  I finally did a system restore.  Was this a one time problem or is the update bad.  In over 30 years I'd never had a problem with any Apple update.

    Hi Lutacrew,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • I cannot install updates on my macbook and itunes no longer works.

    I have a macbook that is 3-4 years old. Recently it stopped booting up at all, however was able to restore using original discs. However, my itunes doesn't work and I cannot install any updates at all. I can download the updates from apple, however, once finished it won't install. The installer utility pops up onthe task bar for about 1 second then disappears. I get no error messages or anything. Same thing for when I try to open itunes...the icon bounces once on the taskbar, but nothing opens. Nothing happens. I think the hard drive may be going bad. Can anybody help me with this? Model info below...
    Model Identifier: MacBook2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MB21.00A5.B07
    SMC Version: 1.17f0
    Serial Number: XXXXXXXXXXX
    Sudden Motion Sensor:
    State: Enabled
    <Edited by Host>

    If that was the only machine you've installed it on, just throw the disks in the new machine and install away. All of Adobe's CS and CC software licensing allows you to have it installed on two machines.
    If it's older CS software, you would need to install it on the same kind of OS (Mac or PC), but CC software doesn't have that limitation. If you're a CC subscriber, just download the CC Desktop App and install from there no matter which OS you have.
    If you get a "Maximum Activations Reached" error, you'll need to call Adobe to have them clear that issue up if the old computer is completely un-salvageable. If you can still fire it up, just open DW on the old machine and choose Help > Deactivate before installing on the new machine.

Maybe you are looking for

  • Unexpected Database Connector Error when rpt has parameters (CR4JE)

    Hello, I am trying to call a crystal report from my web-based JBoss application.  If the report does not have a parameter, the report is displayed just fine.  When the report has a parameter, a parameter screen is displayed. When I enter the paramete

  • Need soultion for this?

    hai friends,          i am doing flexcoldfusion project. now i reterive data(notpad or worddoc or pdf file path) from database using coldfusion.now i want to save that file in my desktop .if i reterive notpad file .that will save  notpad format. if i

  • Unable to find addresses

    I am unable to find the addresses that I synch to my blackberry from outlook. I click on my address book and there are no address listed. When I check properties it tells me I have 121 entries. I try to use the find command and it doesn't pull up any

  • Proble with the Standard role(eu_role)

    Hi All, I am facing some problem with Standard Role(eu_role). Actually i copied the standard role from the path Portal Content -> Content Provided By SAP -> End user content -> Standard Role and pasted it in Portal Content itself, when i am trying to

  • CAS - Write text of certain html div tag to new attribute

    Hi, Is it possible with CAS to extract text from certain HTML div tags to new attributes. So let's say we have tags in a specific "Tags" div and store that text in a new attribute of that record? Thanks! Marco Snels