Today my iPad says network error when trying to run amazon instant video...
Today my iPad says network error when trying to run amazon instant video... I fooled it into starting the movie, but the error message continues...
What you need to do is go into settings
Then go to wifi
Tap the blue arrow to the wifi you are connected to
Tap forget network
Retap the wifi you want
Reinsert your wifi code if you have one
Similar Messages
-
Ive got data on my phone and its keep saying network error when trying to connect
Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect
Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W. -
My Cosmos says network error when I try to update the software
Can someone help me understand why my lg cosmos says network error when I try to update the software? Thank you!
Imeans, this is kind of odd! The Cosmos, hasn't had any new updates to come out. I can look further into this for you. Which Cosmos do you have? Also, what zip code are you in? VanetrisC_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
FireFox keep saying "unexpected error" when trying to print web pages.
FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
Please email me on what to do to get FireFox to work.
I don't see anything in the FAQ that might help me.Hi,
Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration] -
App File Server connection error when trying to run a BI Publisher report..
hello Gurus...
As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
What does our DBA need to do..?
error message reads..
Template code: SUARXASR
Template app: AR
Language: en
Territory: GB
Output type: EXCEL
[5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
many thanks for looking..
Stevennobody experienced this before..?
-
After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?
Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao. -
Error when trying to run Advisor
Hi!
I get the following error when trying to run the Advisor (Application Builder > Application xxx > Utilities > Advisor) over our application:
Unknown type! View: APEX_APPLICATION_PAGE_PROC Column: CONDITION_EXPRESSION1 Value: WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED
... this happens every time, even if I uncheck all boxes except one (e.g. "References with substitution syntax").
I'm wondering if there is something wrong with our Apex installation as I can't see any other references to this problem in the forum. We don't seem to be suffering any other problems so I expect it's something small...
Has anyone else ever encountered this and does anyone know of a solution? I would like to use the Advisor for some QA processes as it looks like a handy tool.
Many thanks in advance,
Alex.
Versions:
Apex 4.1.1.00.23
Oracle DB 10.2.0.2Hi Alex,
very interesting. Looks like one of your processes uses the WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED condition which has been deprecated for a very long time.
If you execute the following query in your workspace schema, you should find those processes which do use the condition. You might want to check if the reported pages/processes are still used in your application.
select application_id,
application_name,
page_id,
page_name,
process_name
from APEX_APPLICATION_PAGE_PROC
where CONDITION_EXPRESSION1 = 'WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED';Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
Error when trying to run an application that worked when built with 8.6
I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6. Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009. The error has to do with the Mean.vi. It claims it cannot find it. The error I get reads as follows:
An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'. LabVIEW load error code 3: Could not load front panel. I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code. Please respond as soon as possible as this will quickly start to impact my testing schedule. Thank You.
Solved!
Go to Solution.Hi!
The same problem ???
I discussed it with my local NI technical support team. The application works without any problems now.
Basic rule: when creating an installer be sure that option "Run Time Engine xxxx" in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
Best regards.
Attachments:
ADDINST.png 13 KB -
I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.
You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]] -
I could not get ExportPDF to work. Trying to convert a pdf to a Word document. Got an error message. Something about a network error when attempting to sign in.
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
Network Error when trying to Publish to iWeb
My website was working very well until I made many changes a few weeks ago to my sites on iWeb. Then I had difficulty publishing again until I tried to shut down the program and found it needed to be updated. I updated iWeb and made changes to the website and because it would not let me publish to .Mac I published to a folder. Now, I can no longer publish to .Mac or a folder. I have tried again and agin to publish to iWeb but I continuously receive this Network Error: Publish failed due to a network error. Check your Internet connection and try again.
If anyone can help me that would be great!
Thanks...CCM in CRHere's another piece of data on this problem. I have also been experiencing the Network Error when publishing, but only on a dialup connection. And in testing I found that if I removed the images from the site so that it contained only shapes and text, it would publish over dialup successfully. The original site including images publishes instantly on a machine at another location that has a DSL connection.
There doesn't seem to be any problem with line quality on the dialup connection, and the same machine that gets the Network Error on publishing from iWeb can sychronize to a .Mac account and use iDisk to backup images over that connection without any problems.
So these results seem to indicate that iWeb has some parameters around network timeouts that are restrictive depending probably on a combination of factors like size of data objects in the site file, network traffic and connection speed. It would be nice if a detailed transaction log could be generated that would pin down what is happening more precisely.
-Allan -
Why do i get network error when trying to connect to sirius xm
My Ipad displays "Network Error" each time I try to start my Sirius XM mobil app. The app works correctly on all my other devices (lap top, smart phone, desk top). Ipad OS5.1 is up to date!
Anyone have any ideas??Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Error when Trying to Run Concurrent Request on ASCP Instance
Hi Experts,
I have an issue when trying to run custom concurrent program in ASCP production.
The error message is:
oracle error 20001
ORA-20001: APP-FND-02901
You do not have access privilege to any operating unit. Please check if your profile option MO: Security Profile includes any operating unit or the profile option MO: Operating Unit is set has been detected in MO_GLOBAL.INIT
I have searched through metalink regarding this issue and the solution is I should define the "MO: Security Profile" and "MO: Operating Unit" profiles.
But the problem is my ASCP instance is not have any OU, it just defined for Inv Orgs. So, when I tried to define the profile, the LOV is empty.
FYI, in my ASCP dev instance is working fine. I can run my concurrent request into it.
In this instance, the profiles of "MO: Security Profile" and "MO: Operating Unit" are blank too.
From this node:
XLAACCPB - Create Accounting Program fails with Oracle error -20001: ORA-20001: APP-FND-02901: You do not have access privilege to any operating unit [ID 753824.1]
It provided 2 actions, and when I tried to run query in the 2nd action, the result is:
/* $Header: AFPFPROB.pls 120.18.12010000.10 2009/04/24 19:33:53 pdeluna ship $ */
Any help would be really appreciated.
Thanks & Regards,
RhezaHello Rheza,
We are also facing the same issue in Self Service HR, We also do not have any Operating Unit setup.
We are trying to run seeded "Active Users" concurrent program. Are you sure without setup of MO: Security Profile / MO: Operating Unit, It will work?
Regards,
Saurabh -
Error when trying to run the rcu.bat file as part of OBIEE 11g installation
when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
"windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
Thanks
Manojafter setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
please help me finding a solution to this error....
and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
thanks
Manoj
Edited by: mkumar on Jun 2, 2011 3:47 AM -
Why do I always get this error when trying to upload Outlook data to iCloud (Win 7 & Outlook 2007) Error: 0x80040604: Up/POST:Conflicts???
I have deleted an reinstalled iCloud and still can't get past the error.have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG
Maybe you are looking for
-
MOVED: X99S Gaming 7 No Gbit
This topic has been moved to GAMING Motherboards. https://forum-en.msi.com/index.php?topic=253995.0
-
Yamaha KX61 USb MIDI keyboard doesn't work in Garage Band
I have installed latest Yamaha USB-MIDI driver V1.2.0 for Yamaha KX61. I have connected USB cable to Mac Mini and turned the keyboard on. In Other section of System Preferences I can see an icon for Yamaha USB-MIDI. In there I can see Device Name: Ya
-
How do i get the toolbar to just show the icons, not the whole name of the site
on the toolbar, I just want the icons of my favorites to show, not the whole name so I can add more to the toolbar..
-
Can't open Photoshop Elements 6 for mac
I've had Photoshop Elements 6 for mac for over a year and it was working fine although RAW was never able to update. About a week ago I went to open it and it would not open. I've tried daily, have done all Apple updates and all Adobe updates and i
-
Xorg7 - error while loading shared libraries
did anyone else have this problem? I've followed the wiki, and tried solutions that have worked for others but no luck still xauth: error while loading shared libraries: libX11.so.6: cannot open shared object file: No such file or directory Couldnt