Today some words on the website are highlighted in blue yellow and pink - awful

I am the administrator for a website and today it started highlighting certain words in pink, yellow and blue. I don't know why it is doing this. I did not change any setting on the website or Mozilla. How do I make the highlights go away?

I discovered it was coming from the words in my latest google search bar. When I deleted all google search words from the bar, the colors disappeared. Google has never done this to me before and I still don't know why it happened - but at least I can make it go away.

Similar Messages

  • Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

    Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

    Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

  • When i open any web page some words in the page are highligted with yellow and when i point to it a little window pops up say search about it in socialsearch.co

    also redirecting happens a lot, also online games windows opens and close my open windows i got bored

    hello Elkbeer, this sounds like an issue with adware or other malicious software that is running on your system, so please perform all these steps:
    # [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
    # afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
    # finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
    [[Troubleshoot Firefox issues caused by malware]]

  • Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

    Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue....  This thing is so annoying when trying to go somewhere i just want the error message to go away.

    In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
    http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

  • I want to stop it going to OpenDNS when I type a word in the url area. I want it to go to google.

    I want to stop it going to OpenDNS when I type a word in the url area. I want it to go to Google.
    I have changed the keyword.URL to http://www.google.com.my/search?q=
    But this only works for terms with a space in it. For example:
    Typing: "word1 word2" will go to Google
    Typing: "word" Goes to OpenDNS
    Furthermore... If I type in "eBay" it will take me to eBay.com (as I would expect) but if I type in another site like "tip20" it goes to OpenDNS.
    How do I fix this once and for all.

    Use a keyword search via the location bar.<br />
    You can add a keyword to a search engine if you click the search engine icon on the search bar and open Manage Search Engines. Select a search engine and click the "Edit Keyword" button. You can use a one letter keyword like g for Google.<br />
    Then you can type <b>g word</b> or <b>g word1 word2</b> in the location bar to do a search.

  • I'm new to iPad. I've installed some apps. The apps are "open" even when I go to something else or close that page. I just did some updates on other apps and see those apps are still "open". How do I close them?  I'm sure it's draining my battery. Help!

    I'm new to iPad. I've installed some apps. The apps are "open" even when I go to that page and go off it. How do I close them?  I'm sure they are draining my battery. Can someone explain what I'm doing or not doing correctly?  Thanks

    1blindmouse wrote:
    I'm new to iPad. I've installed some apps. The apps are "open" even when I go to that page and go off it. How do I close them?  I'm sure they are draining my battery. Can someone explain what I'm doing or not doing correctly?  Thanks
    If you are referring to the fact that, in the App Store app, after you have installed or updated an App, that the Install button changes to now read "Open" then this does not mean that the App is Open and running. It means, rather, that, if you touch the button now marked "Open", the App will be started and "Open". It's just a quick way to get to the App you have just installed or updated.

  • How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

    How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

    I have 7 email accounts on my phone. If I tap EDIT while viewing the Trash folder in any of them I see "Mark All" on the left and "Delete All" on the right. If you tap any message, however, the legends go away.

  • Hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

    hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How do I enable cascading style sheets - Many of the websites are just limited to text with a minimum of graphics

    Many of the websites are just limited to text with a minimum of graphics - Yahoo Mail, Wikipedia, etc.

    ok then,
    do you know if there is an alternative way, such as underclocking permanently the GPU, just as I did with the CPU?
    at least it would stabilize the temperatures around 80.. or sth

  • On Imovie under Share none of the icons are highlighting to click on them?

    On Imovie under Share none of the icons are highlighting to click on them?

    Make sure you have created a Project. The Share menu is for projects. If your clips are in an event, the Share menu will not be active.

  • Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase

    HP Deskjet 4180
    Genuine HP Tri-Color #22 ink cartridge and Black #21 ink cartridge
    Windows 7
    Test printing from Photoshop, Windows Picture Viewer and GIMP.
    Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase.
    The experience that I'm having currently contradicts very good, accurate color from HP cartridges in the past from RGB images that I've printed successfully with this printer.  I've previously got excellent color from the true HP ink cartridges on this Deskjet 4180 printer.
    But today it is obvious that the yellow is not flowing from this cartridge that was installed only a few weeks ago.  And my ink levels are at 50 percent, and they were even higher when I started today... see the screenshots below.
    I'm printing from Photoshop, but for some tests I tried printing from two other applications today but I'm always getting these results that indicate that there is no yellow printing... this is much worse than just a bad color profile.  I'm an experienced photo retoucher and I have a long history of dealing with inkjet printing in the work place with all kinds of printers.
    I know that inks can dry up in their cartridges if they don't get printed with every few weeks and if the printer isn't maintained.  I purchased these new cartridges only about three weeks ago and the first test prints and some prints two weeks ago came out perfect.
    But today this is the result I'm getting... screenshots below show the original RGB image and an actual scan of the bad print results I'm getting, indicating that no yellow is flowing from the HP tri-color cartridge.  And a screenshot of the ink level indicator panel is at the bottom.
    Why is the yellow ink drying up and not flowing so quickly?  How can I prevent this besides doing semi-weekly prints to keep the inks from drying up?  I'm in a fairly humid climat, so dry air is not the problem.  The contact points on the cartridge are clean.
    Does HP guarantee their cartridges for this kind of thing?
    Good color - original RGB image...
    Bad color - actual scan of bad print with no yellow, below...
    Ink levels after test printing...
    Thanks for any help.
    digi

    Well, here is the answer I was looking for, only arrived at by way of my own further investigation and experimentation.
    It seems that no matter who I asked about this problem, I always got the same questions and answers.
    For example, the people at the HP 800 number for consumer help, where it seemed I was not talking to someone who was actually familiar with the product, because they came to the conclusion that I need to buy a new HP printer... wow, isn't that a big surprise for an HP employee to say, "Just buy a new one!".
    No one, and I mean no one, would seem to be able to listen to or understand what I wrote in my original question on this thread about how this printer prints fine when I first put in a new ink cartridge, and then just a few weeks later one or two of the colors seem to be dried up and they won't print.
    And it seems that somewhere I read that you need to print a test maintenance print every month or so to keep the inks from drying up... but the inks seem to be drying up in less than three weeks now, even though I used to be able to go for months without doing a print and the inks would still be fine.
    So when I was talking to someone in India, Malaysia or the Philippines at the HP 800 customer phone support number, after going through so much crap about whether this printer was still in warranty just to have a simple question answered you'd think I was trying to launch nuclear missiles and my launch codes weren't current.
    And it was much the same situation to get on HP's "Live Chat" customer service on the net, and then they'd go through the same line of questions and answers as the support people on the HP 800 phone line...
    Q: "Do you have dirty nozzles on your ink cartridges?"
    A: "No, like I said in my original statement, I cleaned those and they weren't dirty to begin with."
    Response: "Because you need to clean those every so often, you know."
    Q: "Did you try cleaning the contacts on the cartridges?"
    A: "Yes, like I said in my original statement, I already did that."
    Response: "Because you need to clean those contacts every so often, you know."
    Q: "Did you try putting in a new cartridge?"
    A: "Yes, like I said in my original statement, this cartridge is nearly new and it shows a 90% ink level."
    Response: "Because you need to put in new cartridges when the ink runs out, you know."
    Q: "Did you do a test print?"
    A: "Yes, like I said in my original statement, I did a test print and that's what is telling me that the yellow and magenta are not printing any longer."
    Response: "Because that's how you can tell if any colors aren't printing, you know."
    So is anyone else seeing a pattern here?  It's not like I'm talking or live chatting with a real human being, but maybe an automated voice prompt system that only has an A, B, C   or   1, 2, 3   type of response system that it's working from. 
    The people hear a answer, and regardless of what that question was in the troubleshooting category that they are in, they just have a stock response that seems to bypass what the customer's answer was, so it's like I'm talking or live chatting with a machine that is uttering its responses in a fixed pattern, regardless of what I'm saying.
    HP customer service is like talking to someone who isn't listening, so often they ask their next question, but I just answered that question with my previous answer.
    Like I said, the way it used to be, HP or even after market ink cartridges could sit for months without doing a maintenance print and I would still get a perfect print every time.  And that's pretty typical for maybe an older person who isn't printing prints that often, but they just want to print one every few months or so, like my mom, with her HP printer, who I've been troubleshooting this problem for.
    Or even with my own large format Epson printer or any of the pro level inkjet printers and even IRIS printers that I've used in the workplace over the course of the last 20 years... you could do a print every two months and there was no problem with dried up inks.
    And I know somewhere in the past  I read that the maintenance print that the instructions was recommending be printed only needed to be done every 4 to 6 weeks to keep the inks from drying up, although when I go through the entire full blown PDF instruction manual now I can't find ANYTHING about how often a maintenance print needs to be done... that's right, nothing!
    But on Christmas eve I once again exchanged my last, dried up HP tri-color ink cartridge at a Walgreens store where my mom had purchased it months prior (and the guy was nice enough to exchange it even after 5 months)  which was yet another HP tri-color ink cartridge that had at least two of it's colors dry up after only a few weeks.  At that Walgreens they had been nice enough to replace three prior HP tri-color ink cartridges with the same problem in the last year, and before that three different after market, off brand tri-color ink cartridges from another store had dried up after only a few weeks.
    So the guy at Walgreens told me that now  with HP cartridges you need to do a maintenance test print EVERY WEEK in order to keep the inks from drying up... THAT'S EVERY WEEK YOU ARE NOW SUPPOSED TO DO A TEST PRINT FOR MAINTENANCE.
    Now, you DO NOT need to do one of the test prints where it prints a photo of a pear, which uses quite a bit of ink, but you can just do one of the self test prints where you hold down on the CANCEL button and then press the COLOR COPY button and it prints a quick test page with just a little color and a lot of B&W text, and that's apparently enough.
    And that seems to be enough to keep the ink cartridges from drying up, the way they seem to be otherwise doing so quickly now, as opposed to how HP and other brand ink cartridges used to.
    And in fact, now after about a month, after doing weekly self test prints, the ink cartridges are still flowing well and they just did some full color prints quite nicely... ALERT THE MEDIA AND ANYONE WHO CONSIDERS THEMSELVES HP PRINTING EXPERTS!
    So the questions I would ask myself are these...
    First, why is it that NO ONE at HP customer service knew this, whether it be on the HP 800 phone support or on the HP "Live Chat" with people in India, Malaysia and the Philippines, or even here on the HP Help Forum with so-called EXPERTS from HP?
    Second, how have the inks changed so that in the past, you didn't need to do maintenance prints every week, but maybe every two months at the most, in order to keep the inks from drying up, but now the inks dry up in a matter of less than two weeks unless a maintenance print is done once a week?
    Have HP and other ink makers changed the formula of their inks so they dry up much faster, forcing people to buy new cartridges when the last ink cartridge is still at a 90% level with dried up ink?
    And as a result, are people on the HP 800 customer phone support line and on HP "Live Chat" telling people that they need to buy a new printer, when in actuallity their ink cartridges are just drying up within a new record short period of time?
    You tell me, HP experts.

  • I have CS5 and when I opened up a particular folder in Bridge, I see only a few thumbnails of my images.  The rest are this small blue icon.  How do I get my thumbnails back?

    In bridge on CS5 there is one folder I opened up today and in that folder I can only see a small percentage of thumbnail previews of the images.  The rest are this small blue icon.  How do I get my thumbnail previews back?  If I click on this icon it will open the image up okay in photoshop but I would like to see my thumbnail image to see what picture I am opening up.  Can anyone help?

    Well ... i purged my cache and the previews came back.  Thank you for looking.

  • Some futures in bpel which are not possible with ESB and vice versa

    Can anyone please tell me some futures in bpel which are not possible with ESB and For some features available in ESB that are absence in BPEL?

    I think you've mistaken the meaning of both technologies. ESB actually works as a part of BPEL, for instance you can create partner link from any esb service.
    ESB service can only expose data or retrieve and process (transform) them from another service. BPEL is using services like ESB as a source and adds decision making functionality which is not present in ESB.

  • My Mac laptop was running fine till I downloaded the latest itunes version this week, now all the programs are slow, ITUNEs cuts in and out.  Anyone know what I did wrong?

    My Mac laptop was running fine till I downloaded the latest itunes version this week, now all the programs are slow, ITUNEs cuts in and out.  Anyone know what I did wrong?

    Hello Mark Malecki,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having some issues with iTunes on your MacBook. You may want to isolate the issues further by testing to see if they persist in a new user account:
    Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    You can also try starting iTunes in safe mode:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    Thanks,
    Matt M.

Maybe you are looking for