Today update broke the system[SOLVED]

Hello,
I did my regular update today that went fine, but after reboot I got a black screen. The bootup starts as regular and goes on for a while but somewhere in the middle it stops and that's all, black screen.
I updated the kernel, xorg, ati and input devices, qt as far as I remember.
Now, I don't know what to do.
Would appreciate if any knowledgeable person could give me ideas what to do next.
Thanks,
jmak
Last edited by jmak (2010-09-29 22:16:35)

The inittab already looked the same as yours. I didn't have to change anything.
This is the pacman.log update:
[2010-09-29 15:28] ==> SUCCESS
[2010-09-29 15:28] upgraded kernel26 (2.6.35.6-1 -> 2.6.35.7-1)
[2010-09-29 15:28] installed glproto (1.4.12-1)
[2010-09-29 15:28] upgraded mesa (7.8.2-1 -> 7.8.2-3)
[2010-09-29 15:28] upgraded nss (3.12.7-1 -> 3.12.8-1)
[2010-09-29 15:28] upgraded qt (4.6.3-1 -> 4.7.0-2)
[2010-09-29 15:28] upgraded xf86-input-evdev (2.4.0-2 -> 2.5.0-1)
[2010-09-29 15:28] upgraded xf86-input-keyboard (1.4.0-2 -> 1.4.0-3)
[2010-09-29 15:28] upgraded xf86-input-mouse (1.5.0-2 -> 1.6.0-1)
[2010-09-29 15:28] upgraded xf86-video-ati (6.13.1-1 -> 6.13.2-1)
[2010-09-29 15:28] upgraded xf86-video-vesa (2.3.0-2 -> 2.3.0-3)
[2010-09-29 15:28] upgraded xkeyboard-config (1.8-1 -> 1.9-1)
[2010-09-29 15:28] installed xorg-server-common (1.9.0-1)
[2010-09-29 15:28] upgraded xorg-server (1.8.1.902-1 -> 1.9.0-1)
[2010-09-29 15:28] upgraded xterm (261-1 -> 262-1)
[2010-09-29 15:29] upgraded xulrunner (1.9.2.10-1 -> 1.9.2.10-2)

Similar Messages

  • Since the last updating of the system, my Ipad 2, it won't connect to wifi more than 5 minutes at a time unt

    Since the last updating of the system, my Ipad (model MC769C), it won't connect to wifi more than 5 minutes at a time until I reset the router.  Anyone can help ?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Serial Number not updating in the system

    Hi Frnds
    My client is in to retail and has most of the materials under variant configuration. The materials are sold with serial numbers so that they can be tracked and returns/maintenance can be accounted for. The customer is also given discount if he buys that material again using the serial number as reference and the dependency written for that material updates the old purchase qty(old factor) when new purchase qty(new factor) is added to it.
    Since the serial number can only be referenced once the goods has been posted and billing has been done. The factors get updated in the system, the factors were updating correctly for the past 2+yrs but since the last couple of months the updating of serial number old factor is screwed. It is not updating for some serial numbers.
    Any bright ideas what may be the issue. I have searched every nook and corner but could not trace the cause. Is it possible that a particular serial number can update for a certain number or memory or something???

    Sorry, but the problem is not solved: it shows the same, 10 numbers and three points.
    Seeing the espana2004 message, maybe it is related to the use of a proportional font? All the characters in my Pre's serial number are wide.
    This number is needed to download WebOS Doctor. I've had to put my phone in developer mode, connect through novaterm and do a 'lunaprop com.palm.properties.PalmSN' in order to obtain the number. Is there an easier way to get it?
    Regards.

  • My cat sat on the keyboard during update now the system is pale with apple in center and under that circling lines i cant either reboot or shut down.. Powering off only resumes the same. HELP

    My Cat sat on the keyboard during regular updating of the system.  First it went to hypo-slow with alot of beach ball action while i tried to power down for a restart and individually force quit most open apps.    Restarted/Resumed same issue.. changed to(  close open apps upon restart.)....  Now it is light grey, apple icon in center nothing else but the rounding cursur under the middle/only apple icon..... just goes round and round...does not respond to any shutdowns other than power off..... Makes the regular start up noise and back to same routine.... PLease help if possible....
    Thanks Tina Schlemer

    Try booting to the recovery partition and running Disk Utility.
    1, Boot while holding down the command and R keys (two keys).
    see this page: http://www.apple.com/osx/recovery/
    2. Run Disk Utility, select the hard drive in the left column, First Aid then click Repair Disk.
    3. Quit DU and restart.
    If that does not do it, you can reinstall the OS from the same screen as took you to DU.
    (My cat has never been able to do what yours did. I think he is just trying to email his friends.)

  • Hello  my question is  why do i get a error message now that I have done alot of updating of my system  it old, but I got it back up and running Itunes was working fine until  in an update of the system files  then Itunes can't burn the play lists to the

    Hello 
    I recently had to reinstall  my software for  a
    dell computer  a dell latitude d 830,  then  after installing all of my software and such  including itunes   the player did well even record to disks  with no problems   now that my system has done alot of updating of  system  files....now the itunes does not burn to my cd...error message   2131  this time ..this  has occurred several times on this sytem and and as well as  other system   this one has  window vista  64 bit  home prem.  why is the itunes not working  to burn my disks
           it worked fine before  the updates to the system and the itunes software is up dated as well...can  someone suggest  something
    thanks for your time in this matter
    sadeyesjlee

    I recently had to reinstall my software for a
    dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
    The 2131 usually indicates firmware needs to be updated on a drive.
    Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

  • I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

    I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • HT202157 My Apple TV stopped preparing update about 1/4 of the way into the update. The system says do not unplug your Apple TV while updating. I have waited 24 hours... No change. What do I do?

    My Apple TV stopped preparing update about 1/4 of the way into the update. The system says do not unplug your Apple TV while updating. I have waited 24 hours... No change. What do I do?

    You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
    Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • The device mini iPad is not working  after the update of the system

    Hello,
    I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
    please replay me .
    Best,
    Mawaddah

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Update of the System 10.6.8

    From mysterious reason no longer works update in my system (10.6.8). Periodically it says that  update can not be done, and I have made a diagnosis. This of course turns out well, but update is not possible. Otherwise, the Internet works as it should be, I have no problems with it. I tried to apply the 10.6.8 Combo, but nothing.

    rcal wrote:
    …But also my i-Tunes 10.5. can not be updated.
    Why not?  iTunes 10.5 requires at least Leopard 10.5 or higher, and you say you already have Snow Leopard 10.6.8.
    Sorry, but I'm not sure what your software problem is.  

  • HT1338 when I perform a software update search, the system give me an error

    When I perform a software update search, after start to looking the system gave me an error... Do you know why?

    Apple servers are temporarily unavailable.
    Try again later.
    You're not alone. There have been numerous reports.
    Click here.

  • Windows update hangs the system after shutting it down

    I have shut down the system while it was updating the system (Microsoft update). Now it hangs, telling that update nr 11 of 13 is busy
    what should I do?
    The os is windows 8.1

    The system should be able to start an automatic repair.
    First of all you should perform a complete shut down of Win 8.1 as described in this document:
    http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    After that you should reboot the notebook…. Usually the system would start a self-repair procedure which should fix the update issue.

  • Business requirment IFRS related updation in the system

    Dear Friends,
    We are in New GL environment  now business want to maintain the IFRS environment in the system currently we have maintain
    1. parallel ledger for IFRS
    2.New Depreciation Key
    we have required details path to maintain the business IFRS working , what type of required to do

    Check this
    http://scn.sap.com/thread/1452960
    Thanks
    SKKS

  • [solved] Update broke my system. Again

    I did an full system update after few days, and the result is:
    1. spaceFM will no longer automount removable devices, like SD cards
    udisks functions are not authorized through policykit,
    so devmon cannot automount drives.
    2. My reboot/shutdown/hibernate/suspend scripts don't work either:
    $ dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Restart
    Error org.freedesktop.ConsoleKit.Manager.NotPrivileged: Not Authorized
    And I've done that: https://wiki.archlinux.org/index.php/PolicyKit
    but it changed nothing.
    I am using Slim.
    Last edited by Lockheed (2012-05-12 05:25:55)

    With these pkla files I have no automounting, reboot or shutdown issues:
    root [~] # cat /etc/polkit-1/localauthority/50-local.d/org.freedesktop.restart.pkla
    # Configuration file for restart permissions
    # Modified: 01-Jan-10
    [Local Users]
    Identity=unix-group:users
    Action=org.freedesktop.consolekit.system.restart-multiple-users
    ResultAny=no
    ResultInactive=no
    ResultActive=yes
    root [~] # cat /etc/polkit-1/localauthority/50-local.d/org.freedesktop.shutdown.pkla
    # Configuration file for shutdown permissions
    # Modified: 01-Jan-10
    [Local Users]
    Identity=unix-group:users
    Action=org.freedesktop.consolekit.system.stop-multiple-users
    ResultAny=no
    ResultInactive=no
    ResultActive=yes
    root [~] # cat /etc/polkit-1/localauthority/50-local.d/org.freedesktop.udisks.pkla
    # Configuration file for disk access with udisks
    # Modified: 24-Oct-11
    [Local Users]
    Identity=unix-group:users
    Action=org.freedesktop.udisks.*
    ResultAny=no
    ResultInactive=no
    ResultActive=yes
    root [~] # cat /etc/polkit-1/localauthority/50-local.d/org.freedesktop.udisks2.pkla
    # Configuration file for disk access with udisks2
    # Modified: 08-May-2012
    [Local Users]
    Identity=unix-group:users
    Action=org.freedesktop.udisks2.*
    ResultAny=no
    ResultInactive=no
    ResultActive=yes

  • Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

    Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not  acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
    My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
    Please help me.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

Maybe you are looking for