Toggle between open word docments

hi everyone - do any of you know what the shortcut is for switching/toggling between open Word documents with a Mac [OS X]? I'm currently using Microsoft Word 2011.
COMMAND+TAB allows me to switch btw programs, but not between pages within the same program.
Thank you in advance for your help!
SC

command ` (the key above the tab) is the standard Mac keyboard shortcut for switching between open windows of the same application.
I don't know if Microsft has followed the convention.
Peter

Similar Messages

Is there a way to toggle between open sequences? Keyboard Shortcut?

So I usually work form one sequence of selects, and then take pieces of those selects on the source monitor side and edit them into the edit sequence on the program monitor side.
1. Is there a way to toggle between the two?
2. Is there a way to toggle between sequences that are open?
Although it is really nice now you can load sequences into the source monitor it would be nice to toggle to that sequence to actaully see the clips in the source monitor sequence, not just have the visuals.
On a basic level I'd like to know if there is a way to toggle between open sequences that way i can select in and outs lift and undo (which copies to clipboard) and then toggle to the second sequence i have and paste it in the correct place.

Short answer: Yes. Try Shift+3. It's the default Shortcut for "Timelines".

Toggling Between Open Emails -- Keyboard Shortcut

Sometimes I have several emails open at once. The only way I know how to switch between them is to go to the dropdown Window menu. This is a little cumbersome. Is there a keyboard shortcut for toggling between open email windows?
And while I'm at it, is there one for toggling between open Safari windows? I love the Command-TAB way of switching between applications and am looking for something similar.
Thanks.
Paul S.

The question is marked as answered, but I don't think it was the answer you wanted. I often have several emails open and want to toggle through them without leaving the keyboard. The Exposé method works, but is not a keyboard shortcut.
Here is how I got it to work:
In System Prefs under Keyboard and Mouse under Keyboard Shortcuts make sure Keyboard Navigation is checked and under that check "Move focus to next window in active application" and then "Command+ tilde" will work!
iBook 14 1.33GH Mac OS X (10.4.8) 1.25gb RAM

Toggle between open documents?

Hi all,
Is there a keyboard shortcut (or way to create a custom
shortcut) for toggling between open documents in DW? What I'm
talking about is something similar to Alt-Tab in Windows. When I'm
working on coding using the keyboard it would be awfully nice to
quickly toggle to another open file rather than reaching for the
mouse every time.
I'm hoping this is something I've just not run across yet in
3 different upgrades of DW and not something the program can't do.
Thanks!
Ellie

choirellie wrote:
> Hi all,
>
> Is there a keyboard shortcut (or way to create a custom
shortcut) for toggling
> between open documents in DW? What I'm talking about is
something similar to
> Alt-Tab in Windows. When I'm working on coding using the
keyboard it would be
> awfully nice to quickly toggle to another open file
rather than reaching for
> the mouse every time.
It's built in: CTRL+TAB moves left to right, and
CTRL+SHIFT+TAB moves right to left. I think it may be CMD+` for
Mac, but not certain.
Unfortunately, in CS$, I've not been able to find a short cut
to toggle between the related files in the current opened document,
besides going the "long" route: ALT+V, holding ALT hit R twice,
then the right arrow key and then arrowing up or down to the next
file to switch to.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Toggling between open files

If I have more than one project file open, what is the best way (if any) to toggle between them?
The problem that I'm having is that when I hit play for one file, it starts playing the other simultaneously, which is annoying.
Thanks.

The question is marked as answered, but I don't think it was the answer you wanted. I often have several emails open and want to toggle through them without leaving the keyboard. The Exposé method works, but is not a keyboard shortcut.
Here is how I got it to work:
In System Prefs under Keyboard and Mouse under Keyboard Shortcuts make sure Keyboard Navigation is checked and under that check "Move focus to next window in active application" and then "Command+ tilde" will work!
iBook 14 1.33GH Mac OS X (10.4.8) 1.25gb RAM

Simple-how can I toggle between screens

Ok...this is really simple, or it should be. Can I change a preference anywhere on my Mac to where I can not only toggle between programs with the "apple key + tab" shortcut, but toggle between open windows within a program?
For example, if i have iTunes open and Safari open I can toggle (switch screens/windows) between the two with the "apple key + tab" command but I cannot toggle between screens WITHIN a program. If I have Word open and I am working on two documents and I want to go from the forward window that I am working in to the window behind it I have to manually, with the mouse point and click on the window at the back.
Is there a preference I can change somewhere on my Mac or no? I've looked but maybe I'm not looking in the right place.
Curlz

Who says it's undocumented? It is documented several places. In Mac Help, search for "Keyboard shortcuts"; select "Full keyboard navigation" or "Shortcuts for windows" -- this is documented both places and probably others as well.
Also, in System Preferences > Keyboard & Mouse > Keyboard Shortcuts, you can change shortcuts, or disable them, or just see what they are currently set to.

Toggling Between Windows

Hi All,
Does anyone know if there is a key function that enables you to toggle between windows of 1 program. For example toggle between all your open Safari browser pages? Something like "apple + tab" but for toggling between open windows in one application?
Many thanks,
Gustaf
powerbook Mac OS X (10.3.8)

Hi Gustaf!
I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options.That may be intentional, but if you are not aware of how those work, here is some information.
When you mark posts that have helped you, or solved the problem, you are Thanking the contributor, by awarding them points.
In threads with multiple replies, it also alerts other readers, to which answers may have helped, or solved the issue.
What are question answers?
When a community member posts a question as a topic starter, other members can post an answer in reply. Please note that not all replies actually answer the question.
In some cases, an answer can be just some hints or helpful information to help the poster solve an issue. The originator of the topic can mark such a reply as a Helpful post. In other cases, a community member may post a specific answer that provides a solution to the original poster's issue. The originator can then mark this reply as a Solved post.
The original topic poster has the choice to mark replies as either Helpful or Solved, or not mark a reply at all. In addition, the originator can end the discussion by marking the topic as Answered, which provides a visual cue—a green star—to the community members. This lets everyone know that the topic contains valid helpful information.
Note: Only two replies may be classified as Helpful and only one reply may be classified as Solved in any question topic. Non-question topics do not offer these classifications.
This info, and more, can be viewed by clicking on ? Help & Terms of Use, located under your login name, on all "Discussions" pages.
ali b

Indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.

indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Toggling order between open windows?

It used to be that when I used Command-` to toggle between windows in Safari, they would toggle in the order I opened them. Now that I've upgraded to Snow Leopard Safari the same key command makes Safari toggle randomly through the open windows. It has some idea of how it wants to cycle through them that I don't understand. I can't seem to find a way to change it. The random toggle order doesn't affect any of my other apps. Everything else seems to work the same way it used to except Safari.
Any ideas?
(Please don't tell me to use tabs instead. I don't like tabs. I prefer windows I can toggle through.)

Ok...
Works fine here. Check System Preferences / Keyboard - Keyboard Shortcuts.
Perhaps you have a modified shortcut that's causing the problem.
Or maybe a third party Safari add-on?
http://support.apple.com/kb/TS3230?viewlocale=en_US

How can I open Word docs with Pages?

I just installed the iWorks software because it said it would open Word docs. Now I can't seem to open any Word .doc files I had archived onto CDs, after abandoning my PC.
I've made Pages my default application for opening text, and that didn't help. I just keep getting the error message "The document "X.doc" couldn't be opened." Any ideas?
IMAC Mac OS X (10.4.8)

Welcome to Apple Discussions Paul
Pages - the word processing/page layout application in iWork (no "s") - usually doesn't have any problems with opening Word files, but I do believe it can't open any Word files older than version 6. It is also highly unlikely that it would be able to open any from the new 2007 version. If your documents are from a version in between those, they should open.
How are you trying to open them? There are at least three common methods, but, since you say the documents are on a CD, I suggest copying them from the CD to your hard drive first. To open one at a time you can use File > Open (where > means following menu commands with your cursor). To open more than one at a time, select the ones you want by Command- (⌘) clicking the files & then dragging them onto the Pages icon in the Dock or a Finder window or Control- or right-click & choose Pages from Open with in the contextual menu that appears.

Toggle between Web Items using an Image link in WAD 7.0

Hello,
i want to toggle between Web items using an image link: e.g. on my template I have a visible table and a hidden chart, now when I click on a small chart image I want the table to get hidden and the chart to get visible. I know that this is possible using a button group, but I need to make this possible using an image.
My approach is the following:
1. Using a script item with 2 commands of type SET_ITEM_PARAMETERS from the command wizard, from which one command hides the table and one command makes the chart visible.
2. Writing a hyperlink which calls up the script using the image as source.
Now my problem:
This works only if I'm using ONE command of type SET_ITEM_PARAMETERS in the script function. So I can either make the chart visible or hide the table. When I insert a second command in the java script nothing works anymore. However, I need to use both commands at once in order to make it useful. I don't know how to program in javascript, can you help me out?!
Thanks,
Norbert
PS: I could show you the javascript code which was created automatically by the web application designer including both commands, but as I've just seen it in the preview it looks totally messed up since it doesn't get formatted corrected.

Hi Norbert,
There is an easier approach. In the button group item, you can insert an image and a description. Just open the parameters of your button there you will find the parameter 'icon'. Insert an image there and leave the 'caption' empty.
Best regards,
Janine

Unable to Open Word Documents Since Mavericks 10.9.5 Update

Since updating to Mavericks 10.9.5, I can no longer open Word documents that were created/edited between 8-27 and 9-18-14, and that I had opened 9-17 and earlier. I receive the following message when I attempt to open a document:
"Word cannot open this document. The document might be in use, the document might not be a valid Word document,
or the file name might contain invalid characters (for example, \ /)."
I have Microsoft Word for Mac 2011, version 14.3.5., and a MacBook Air 1.8GHz, Intel Core i7, mid 2011. Can you help?

Anybody else experiencing this? No mention of effects on Quicktime in the 10.9.5 upgrade notes.
Unable to duplicate your problem in random tests of my library. M4V (H.264/AAC/AC3/Chapter encoded) files continue to play normally in both QT 7 and QT X players. Anything special about your files or anything unusual happen during the system upgrade installation?

Hand tool does not toggle between other tools anymore.

in Photoshop & Illustrator, pressing the spacebar no longer toggles between the hand tool and other tools.

http://forums.adobe.com/community/illustrator
http://forums.adobe.com/community/photoshop
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Adobe Captivate 8 create a toggle between show/hide image

Hello,
Does anyone know how I can create a action with a button that toggles between shows or hides a image.
Thanks in advanced for helping.

BTW since you are on CP8, don't use an advanced but a shared action. The only parameter will be the image. You can then use that action over and over again, even in other projects. For another project: open the Library of this older project in the new project, drag the Shared action to the library of the new project. The variable v_visib will be automatically created, and when using that shared action, you'll just have to define the parameter (image), or you can even replace the image by another object or by a group.
You can feel that I like shared actions, not everyone agrees with me however.

PLMD_AUDIT - Toggle between Display and Change - Important!!

Hello all,
I've a problem when I work on PLMD_AUDIT.
Pre-requisite for replicating the issue.
1> Change the settings in PLMD_AUDIT (a face like icon) to Display mode
When I run PLMD_AUDIT for an Audit with Action, it displays me the "Grouping" field and the "Involved Persons" tab values correctly.
But when I toggle from Display to Change, the value in "Grouping" and the "Involved Persons" tab vanishes.
Can you please check in your system and let me know if you also face this issue?
Thank you in advance,
Vaishnavi

Hello Keerthi,
Thanks for your reply.
Please follow the below mentioned steps.
1) Change your time zone to a different time zone other than the created time zone of the action.
say if action has been created in London time zone, change system zone to some other than London.
2) Change the Settings in PLMD_AUDIT tcode (face like icon) to Display
3) Open any audit WITH ACTION.
4) When you double click on Action inside the audit, the action will be opened in Display mode.
5) Now toggle between Display and Change.
6) Kindly check if the values in the "Grouping field" and BUPA roles in "Involved Persons" tab are present now after toggling?
Please let me know at the earliest.
Your assistance is highly appreciated in this regard.
Thanks in advance,
Vaishnavi

Toggle between open word docments

Similar Messages

Maybe you are looking for