Toggle Full Keyboard Access is Not Working after Shutdown/Reboot

Hi,
I'm yet another keyboard maniac and somehow as above subject was keep re-occured every time after enabled it, I've turn it on full keyboard access in system preferences > Keyboard > Keyboard Shortcuts. All seemed to be good before I shutdown or reboot my macbook pro. I could access all the dialogs and windows. After a reboot or shutdown, all the dialogs from any other apps can still be accessed via keyboard except one single window, the shutdown window (both from hitting apple->shutdown and control+eject.) I have to toggle control+f1 or control+f7 every freaking time in order to enabled keyboard access to shutdown/reboot. I've tried "defaults read -g AppleKeyboardUIMode" in terminal and it returned 3 which is "Full Keyboard Access ON and All controls" even after a fresh reboot:-
+++++++++
Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
3
+++++++++
But when I'm using sudoer to check the result was set to "0" means disable:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
Password:
0
+++++++++
So what I do for the workaround/fix is by the set value to enabled it using root access level or sudoer:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults write NSGlobalDomain AppleKeyboardUIMode -int 3
+++++++++
Once done do reboot your Mac & check the result in Terminal should shows as below:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
3
=========
Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
3
+++++++++
So it's fixed for my issue. If anyone have better suggestion or the proper method please share.
Thanks in advance.

Quakershaker,
So what I do for the workaround/fix is by the set value to enabled it using root access level or sudoer:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults write NSGlobalDomain AppleKeyboardUIMode -int 3
+++++++++
Once done do reboot your Mac & check the result in Terminal should shows as below:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
3
=========
Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
3
+++++++++
So it's fixed for my issue. You may try this let me know the outcome.
Thanks

Similar Messages

  • Keyboard and touchpad not working after Windows 10 update

    after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine 

    It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Keyboard and mouse not working after boot

    Hello!
    it's my first time here
    I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
    I have also posted it on linuxquestions:
    http://www.linuxquestions.org/questions … ot-934040/
    What might be causing that problem?
    and, considering the problem occurred after an upgrade, reinstalling the system would correct it?

    when booting into runlevel 3, the keyboard and mouse works fine.
    my pacman.log(only for the update day) and messages.log are:
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 11:35:37 myhost dhcpcd[2756]: eth0: eth0: MTU set to 576
    Mar 11 11:39:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:39:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:39:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:42:11 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:42:11 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:42:11 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:44:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:44:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:44:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:06:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:06:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:06:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:16:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:16:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:16:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:19:15 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:19:15 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:19:15 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:21:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:21:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:21:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:23:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:23:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:23:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:31:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:31:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:31:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:34:26 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:34:26 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:34:26 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 12:35:37 myhost dhcpcd[2926]: eth0: eth0: MTU set to 576
    Mar 11 12:36:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:36:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:36:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:40:27 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:40:27 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:40:27 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:52:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:52:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:52:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:55:00 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:55:00 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:55:00 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:57:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:57:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:57:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 13:21:01 myhost -- MARK --
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 13:35:37 myhost dhcpcd[3041]: eth0: eth0: MTU set to 576
    Mar 11 13:55:37 myhost -- MARK --
    Mar 11 14:21:01 myhost -- MARK --
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 14:35:37 myhost dhcpcd[3095]: eth0: eth0: MTU set to 576
    Mar 11 14:55:37 myhost -- MARK --
    Mar 11 15:21:01 myhost -- MARK --
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 15:35:38 myhost dhcpcd[3144]: eth0: eth0: MTU set to 576
    Mar 11 15:55:38 myhost -- MARK --
    Mar 11 16:21:01 myhost -- MARK --
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 16:35:38 myhost dhcpcd[3192]: eth0: eth0: MTU set to 576
    Mar 11 16:51:02 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 16:51:02 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 16:51:02 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:21:01 myhost -- MARK --
    Mar 11 17:27:48 myhost init: Trying to re-exec init
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:25 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:05 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:31:15 myhost kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 17:35:38 myhost dhcpcd[6669]: eth0: eth0: MTU set to 576
    Mar 11 17:55:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:55:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:55:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:57:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:57:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:57:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:00:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:00:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:00:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:17:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:17:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:17:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 18:35:38 myhost dhcpcd[7243]: eth0: eth0: MTU set to 576
    Mar 11 18:55:39 myhost -- MARK --
    Mar 11 19:21:01 myhost -- MARK --
    Mar 11 19:27:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:27:04 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:27:04 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:29:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:29:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:29:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:32:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:32:03 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:32:03 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:34:05 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:34:05 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:34:05 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 19:35:38 myhost dhcpcd[8708]: eth0: eth0: MTU set to 576
    Mar 11 19:55:38 myhost -- MARK --
    Mar 11 20:21:01 myhost -- MARK --
    Mar 11 20:32:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:32:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:32:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:34:42 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:34:42 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:34:42 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 20:35:38 myhost dhcpcd[10147]: eth0: eth0: MTU set to 576
    Mar 11 20:37:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:37:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:37:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:48:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:48:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:48:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:54:44 myhost shutdown[10347]: shutting down for system halt
    Mar 11 20:54:44 myhost init: Switching to runlevel: 0
    Mar 11 20:54:48 myhost dhcpcd[10522]: sending signal 1 to pid 1269
    Mar 11 20:54:48 myhost dhcpcd[1269]: received SIGHUP, releasing
    Mar 11 20:54:48 myhost dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
    Mar 11 20:54:48 myhost dhcpcd[10522]: waiting for pid 1269 to exit
    Mar 11 20:54:48 myhost dhcpcd[10527]: eth0: eth0: MTU restored to 1500
    Mar 11 20:54:49 myhost dhcpcd[1269]: eth0: removing interface
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMI present.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] RAMDISK: 3759a000 - 37ff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 10:25:59 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 10:25:59 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Mar 12 10:25:59 myhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Policy zone: Normal
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Checking aperture...
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Node 0: aperture @ 748000000 size 32 MB
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Aperture beyond 4GB. Ignoring.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] This costs you 64 MB of RAM
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Console: colour VGA+ 80x25
    Mar 12 10:25:59 myhost kernel: [ 0.000000] console [tty0] enabled
    Mar 12 10:25:59 myhost kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Fast TSC calibration using PIT
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Detected 2109.668 MHz processor.
    Mar 12 10:25:59 myhost kernel: [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
    Mar 12 10:25:59 myhost kernel: [ 0.003342] pid_max: default: 32768 minimum: 301
    Mar 12 10:25:59 myhost kernel: [ 0.003370] Security Framework initialized
    Mar 12 10:25:59 myhost kernel: [ 0.003376] AppArmor: AppArmor disabled by boot time parameter
    Mar 12 10:25:59 myhost kernel: [ 0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007954] Mount-cache hash table entries: 256
    Mar 12 10:25:59 myhost kernel: [ 0.008114] Initializing cgroup subsys cpuacct
    Mar 12 10:25:59 myhost kernel: [ 0.008121] Initializing cgroup subsys memory
    Mar 12 10:25:59 myhost kernel: [ 0.008131] Initializing cgroup subsys devices
    Mar 12 10:25:59 myhost kernel: [ 0.008133] Initializing cgroup subsys freezer
    Mar 12 10:25:59 myhost kernel: [ 0.008136] Initializing cgroup subsys net_cls
    Mar 12 10:25:59 myhost kernel: [ 0.008138] Initializing cgroup subsys blkio
    Mar 12 10:25:59 myhost kernel: [ 0.008192] CPU: Physical Processor ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008194] CPU: Processor Core ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008197] mce: CPU supports 6 MCE banks
    Mar 12 10:25:59 myhost kernel: [ 0.008208] using AMD E400 aware idle routine
    Mar 12 10:25:59 myhost kernel: [ 0.009025] ACPI: Core revision 20110623
    Mar 12 10:25:59 myhost kernel: [ 0.011442] ftrace: allocating 17394 entries in 69 pages
    Mar 12 10:25:59 myhost kernel: [ 0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    Mar 12 10:25:59 myhost kernel: [ 0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
    Mar 12 10:25:59 myhost kernel: [ 0.049997] Performance Events: AMD PMU driver.
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... version: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... bit width: 48
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... generic registers: 4
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... value mask: 0000ffffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... max period: 00007fffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... fixed-purpose events: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... event mask: 000000000000000f
    Mar 12 10:25:59 myhost kernel: [ 0.066733] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.093342] Booting Node 0, Processors #1
    Mar 12 10:25:59 myhost kernel: [ 0.190007] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.210005] #2
    Mar 12 10:25:59 myhost kernel: [ 0.306665] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.313317] Brought up 3 CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
    Mar 12 10:25:59 myhost kernel: [ 0.315139] devtmpfs: initialized
    Mar 12 10:25:59 myhost kernel: [ 0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.317603] print_constraints: dummy:
    Mar 12 10:25:59 myhost kernel: [ 0.317656] NET: Registered protocol family 16
    Mar 12 10:25:59 myhost kernel: [ 0.317767] TOM: 00000000c0000000 aka 3072M
    Mar 12 10:25:59 myhost kernel: [ 0.317784] TOM2: 0000000140000000 aka 5120M
    Mar 12 10:25:59 myhost kernel: [ 0.317805] Extended Config Space enabled on 1 nodes
    Mar 12 10:25:59 myhost kernel: [ 0.317819] ACPI: bus type pci registered
    Mar 12 10:25:59 myhost kernel: [ 0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.317896] PCI: not using MMCONFIG
    Mar 12 10:25:59 myhost kernel: [ 0.317898] PCI: Using configuration type 1 for base access
    Mar 12 10:25:59 myhost kernel: [ 0.317899] PCI: Using configuration type 1 for extended access
    Mar 12 10:25:59 myhost kernel: [ 0.318408] bio: create slab <bio-0> at 0
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Module Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Aggregator Device)
    Mar 12 10:25:59 myhost kernel: [ 0.321075] ACPI: Executed 1 blocks of module-level executable AML code
    Mar 12 10:25:59 myhost kernel: [ 0.322673] ACPI: Interpreter enabled
    Mar 12 10:25:59 myhost kernel: [ 0.322677] ACPI: (supports S0 S1 S4 S5)
    Mar 12 10:25:59 myhost kernel: [ 0.322695] ACPI: Using IOAPIC for interrupt routing
    Mar 12 10:25:59 myhost kernel: [ 0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 12 10:25:59 myhost kernel: [ 0.353905] ACPI: No dock devices found.
    Mar 12 10:25:59 myhost kernel: [ 0.353908] HEST: Table not found.
    Mar 12 10:25:59 myhost kernel: [ 0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 12 10:25:59 myhost kernel: [ 0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 12 10:25:59 myhost kernel: [ 0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Mar 12 10:25:59 myhost kernel: [ 0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
    Mar 12 10:25:59 myhost kernel: [ 0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
    Mar 12 10:25:59 myhost kernel: [ 0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
    Mar 12 10:25:59 myhost kernel: [ 0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
    Mar 12 10:25:59 myhost kernel: [ 0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
    Mar 12 10:25:59 myhost kernel: [ 0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
    Mar 12 10:25:59 myhost kernel: [ 0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: loaded
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: bridge control possible 0000:02:00.0
    Mar 12 10:25:59 myhost kernel: [ 0.366818] PCI: Using ACPI for IRQ routing
    Mar 12 10:25:59 myhost kernel: [ 0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.374361] NetLabel: Initializing
    Mar 12 10:25:59 myhost kernel: [ 0.374363] NetLabel: domain hash size = 128
    Mar 12 10:25:59 myhost kernel: [ 0.374365] NetLabel: protocols = UNLABELED CIPSOv4
    Mar 12 10:25:59 myhost kernel: [ 0.374382] NetLabel: unlabeled traffic allowed by default
    Mar 12 10:25:59 myhost kernel: [ 0.381236] pnp: PnP ACPI init
    Mar 12 10:25:59 myhost kernel: [ 0.381259] ACPI: bus type pnp registered
    Mar 12 10:25:59 myhost kernel: [ 0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383953] pnp: PnP ACPI: found 14 devices
    Mar 12 10:25:59 myhost kernel: [ 0.383955] ACPI: ACPI bus type pnp unregistered
    Mar 12 10:25:59 myhost kernel: [ 0.390613] Switching to clocksource acpi_pm
    Mar 12 10:25:59 myhost kernel: [ 0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
    Mar 12 10:25:59 myhost kernel: [ 0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    Mar 12 10:25:59 myhost kernel: [ 0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
    Mar 12 10:25:59 myhost kernel: [ 0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Mar 12 10:25:59 myhost kernel: [ 0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.390824] NET: Registered protocol family 2
    Mar 12 10:25:59 myhost kernel: [ 0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396352] TCP: Hash tables configured (established 524288 bind 65536)
    Mar 12 10:25:59 myhost kernel: [ 0.396355] TCP reno registered
    Mar 12 10:25:59 myhost kernel: [ 0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396554] NET: Registered protocol family 1
    Mar 12 10:25:59 myhost kernel: [ 0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460711] Unpacking initramfs...
    Mar 12 10:25:59 myhost kernel: [ 0.572196] Freeing initrd memory: 10584k freed
    Mar 12 10:25:59 myhost kernel: [ 0.577900] PCI-DMA: Disabling AGP.
    Mar 12 10:25:59 myhost kernel: [ 0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
    Mar 12 10:25:59 myhost kernel: [ 0.581547] PCI-DMA: using GART IOMMU.
    Mar 12 10:25:59 myhost kernel: [ 0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Mar 12 10:25:59 myhost kernel: [ 0.585462] IBS: LVT offset 1 assigned
    Mar 12 10:25:59 myhost kernel: [ 0.585486] perf: AMD IBS detected (0x00000007)
    Mar 12 10:25:59 myhost kernel: [ 0.585671] audit: initializing netlink socket (disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.585695] type=2000 audit(1331547952.583:1): initialized
    Mar 12 10:25:59 myhost kernel: [ 0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Mar 12 10:25:59 myhost kernel: [ 0.625385] VFS: Disk quotas dquot_6.5.2
    Mar 12 10:25:59 myhost kernel: [ 0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.625563] msgmni has been set to 7911
    Mar 12 10:25:59 myhost kernel: [ 0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Mar 12 10:25:59 myhost kernel: [ 0.625843] io scheduler noop registered
    Mar 12 10:25:59 myhost kernel: [ 0.625845] io scheduler deadline registered
    Mar 12 10:25:59 myhost kernel: [ 0.625880] io scheduler cfq registered (default)
    Mar 12 10:25:59 myhost kernel: [ 0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626710] ERST: Table is not found!
    Mar 12 10:25:59 myhost kernel: [ 0.626712] GHES: HEST is not enabled!
    Mar 12 10:25:59 myhost kernel: [ 0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Mar 12 10:25:59 myhost kernel: [ 0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.943516] Linux agpgart interface v0.103
    Mar 12 10:25:59 myhost kernel: [ 0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    Mar 12 10:25:59 myhost kernel: [ 0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
    Mar 12 10:25:59 myhost kernel: [ 0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
    Mar 12 10:25:59 myhost kernel: [ 0.946084] mousedev: PS/2 mouse device common for all mice
    Mar 12 10:25:59 myhost kernel: [ 0.946138] rtc_cmos 00:02: RTC can wake from S4
    Mar 12 10:25:59 myhost kernel: [ 0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Mar 12 10:25:59 myhost kernel: [ 0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
    Mar 12 10:25:59 myhost kernel: [ 0.946347] cpuidle: using governor ladder
    Mar 12 10:25:59 myhost kernel: [ 0.946350] cpuidle: using governor menu
    Mar 12 10:25:59 myhost kernel: [ 0.946589] TCP cubic registered
    Mar 12 10:25:59 myhost kernel: [ 0.946729] NET: Registered protocol family 10
    Mar 12 10:25:59 myhost kernel: [ 0.947209] NET: Registered protocol family 17
    Mar 12 10:25:59 myhost kernel: [ 0.947213] Registering the dns_resolver key type
    Mar 12 10:25:59 myhost kernel: [ 0.947383] registered taskstats version 1
    Mar 12 10:25:59 myhost kernel: [ 0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
    Mar 12 10:25:59 myhost kernel: [ 0.960226] Initializing network drop monitor service
    Mar 12 10:25:59 myhost kernel: [ 0.961665] Freeing unused kernel memory: 736k freed
    Mar 12 10:25:59 myhost kernel: [ 0.961941] Write protecting the kernel read-only data: 8192k
    Mar 12 10:25:59 myhost kernel: [ 0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Mar 12 10:25:59 myhost kernel: [ 0.968163] Freeing unused kernel memory: 1636k freed
    Mar 12 10:25:59 myhost kernel: [ 0.971309] Freeing unused kernel memory: 660k freed
    Mar 12 10:25:59 myhost [ 0.983845] udevd[66]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 1.019251] usbcore: registered new interface driver usbfs
    Mar 12 10:25:59 myhost kernel: [ 1.019287] usbcore: registered new interface driver hub
    Mar 12 10:25:59 myhost kernel: [ 1.019363] usbcore: registered new device driver usb
    Mar 12 10:25:59 myhost kernel: [ 1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.022334] SCSI subsystem initialized
    Mar 12 10:25:59 myhost kernel: [ 1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    Mar 12 10:25:59 myhost kernel: [ 1.024274] ehci_hcd 0000:00:02.1: debug port 1
    Mar 12 10:25:59 myhost kernel: [ 1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
    Mar 12 10:25:59 myhost kernel: [ 1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    Mar 12 10:25:59 myhost kernel: [ 1.033711] hub 1-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.033717] hub 1-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Mar 12 10:25:59 myhost kernel: [ 1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
    Mar 12 10:25:59 myhost kernel: [ 1.088876] hub 2-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.088885] hub 2-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.090175] scsi0 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.090309] scsi1 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
    Mar 12 10:25:59 myhost kernel: [ 1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
    Mar 12 10:25:59 myhost kernel: [ 1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.095105] scsi2 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095190] scsi3 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095843] scsi4 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095923] scsi5 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.417172] ata5: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Mar 12 10:25:59 myhost kernel: [ 1.573620] ata3.00: configured for UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
    Mar 12 10:25:59 myhost kernel: [ 1.586720] Switching to clocksource tsc
    Mar 12 10:25:59 myhost kernel: [ 2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.060169] ata4.00: configured for UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 2.390479] ata6: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Mar 12 10:25:59 myhost kernel: [ 2.397316] sd 2:0:0:0: [sda] Write Protect is off
    Mar 12 10:25:59 myhost kernel: [ 2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Mar 12 10:25:59 myhost kernel: [ 2.413212] sda: sda1 sda2 sda3 sda4
    Mar 12 10:25:59 myhost kernel: [ 2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
    Mar 12 10:25:59 myhost kernel: [ 2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Mar 12 10:25:59 myhost kernel: [ 2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
    Mar 12 10:25:59 myhost kernel: [ 2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    Mar 12 10:25:59 myhost kernel: [ 2.818556] EXT4-fs (sda3): write access will be enabled during recovery
    Mar 12 10:25:59 myhost kernel: [ 2.844947] EXT4-fs (sda3): recovery complete
    Mar 12 10:25:59 myhost kernel: [ 2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    Mar 12 10:25:59 myhost [ 4.125862] udevd[177]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
    Mar 12 10:25:59 myhost kernel: [ 5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    Mar 12 10:26:01 myhost ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
    Mar 12 10:26:01 myhost ntpd[547]: proto: precision = 0.115 usec
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 3 lo ::1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: peers refreshed
    Mar 12 10:26:01 myhost ntpd[547]: Listening on routing socket on fd #20 for interface updates
    Mar 12 10:26:02 myhost kernel: [ 9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
    Mar 12 10:26:57 myhost dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMI present.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] RAMDISK: 37d6c000 - 37ff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 12:41:56 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 12:41:56 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 12:41:56 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 12

  • XFCE Keyboard Layout applet not working after latest xorg update..

    Is this a bug in the xorg update or most the kbd layou be reompiled or? I am not able to swtich between my two kbd layouts anymore.. Downgrading the org packages made it work again but I guess that's not a long term solution...
    Regards,
    BTJ

    Hi mattywix - can you add any more detail please ?
    I have a recent experience that sounds related to your problem - I have a 15" macbook pro bought new in the UK a couple of years ago (macbookpro 5,3), which has been running perfectly under snow leopard until a couple of days ago when my trackpad stopped recognising the standard "left" click.
    "Right" click, scroll and pointer movement continued to work fine.
    Booting in safe mode seemed to give me back the left click but this was immediately lost when I returned to standard boot up.
    Doing a full reinstall from original disks, all seemed fine. Over 1.6Gb of software updates and everything worked great. Then the final run of S/W update took me from os-x 10.6.6 to 10.6.7 plus a few other changes and again the trackpad stopped recognising "left" click.
    Plugging in an external drive which had a copy of my system as at OS-X 10.6.3 and booting off that - everything works fine again.
    I can only conclude that there's an issue with the 10.6.7 upgrade and my 2 year old MBP hardware so will have to reinstall yet again but stop at 10.6.6
    My concern is that after the first upgrade to 10.6.7 I put the laptop on charge to top it up from about 70% and came back to find the machine abnormally hot. With your comment about toasting the logic board, I wonder if there's a bug in the power control software too which I was lucky enough to catch before my machine suffered the same damage as yours ?
    Sorry to hear about your bad luck but thanks for warning us about it.
    Alick

  • Zoom keyboard shortcut does not work after GB '09 upgrade

    I upgraded to Snow Leopard and iLife 09 and immediately noticed the keyboard shortcut for zooming in Garageband '09 has gone away. The doc says it changed from (Control-Arrow) to (Option-Control-Arrow) but neither one works. What's up? Is this a bug, a conflict, or an I/O (ignorant operator) issue?

    Nope - there is no Zoom keyboard shortcut in GB '09, but you can still access the feature from the 'Window' menu.

  • Keyboard volume controls not working after 10.5.7 combo update

    Actually, editing my original post, I now have to use the fn key aswell as F3, F4 and F5. Previously didn't need to use finger aerobics to change the volume, it wa done with one finger.
    Is there a way of changing it back ?
    Message was edited by: Airsculpture

    I have unchecked "Use all F1 etc keys as standard function keys" in keyboard prefs and we are back to normal.
    This has worked.

  • Mobile and remote Outlook access do not work after mailbox move

    We recently moved our mailboxes to a different datastore. We are not unable to access our mailboxes using our cell phones or Outlook remotely. testconnectivity.microsoft.com gives me a http 500 error for both the Exchange virtual directory and the RPC.
    Any ideas?

    Was this a migration to another version of Exchange or simply mailbox move from the same version of Exchange?

  • Wireless keyboard and trackpad not working.

    iMac keyboard and trackpad not working after a couple days of not using. Hit power button on them and the light will blink, but will not function. Any help?

    Have you tried a fresh set of Alkaline batteries?
    Have you tried cleaning the battery contacts in them?

  • HT1338 wireless keyboard letters are not working

    My wireless keyboard letters are not working after i using retouch option on aperture
    Thanks
    Vic

    superdupertyn wrote:
    i left my macbook pro open for along period of time,
    after i open it
    What did you open if if was already opened?
    As for your non-working keys, perhaps debris somehow got beneath the keys.  Especially if you were eating while using your computer.  Spilled anything on the keys lately or previously?
    How to remove and clean your Macbook Pro Keyboard
    Cleaning Macbook keys after a spill
    If none of the above applies to you, you could have a hardware issue.  If you have Apple Care, call them and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you.
    Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.
    NOTE:  If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with.   They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).  
    If you have Homeowners insurance, place a claim with them.

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Illustrator CS6 does not honor Full Keyboard Access setting

    Why does Illustrator CS6 not honor the Mac system setting for Full Keyboard Access? Under System Preferences > Keyboard > Keyboard Shortcuts, I have Full Keyboard Access set to allow the Tab key to cycle between "Text boxes and lists only". But Illustrator allows the Tab key to focus on all controls, including buttons. Is there a setting somewhere in Illustrator to change this behavior?

    You can try to edit the keyboard file, but you need to find out the code for the Danish keys.
    http://forums.adobe.com/message/2984641#2984753

  • Why is the scroll function not working after accessing the voice feature in settings?

    Why is the scroll function not working after accessing the voice feature in settings?

    For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
    If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
    Set the current key and tempo, name the loop, and save the loop.
    Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
    You will be able to transpose the sample as described above, like a regular loop.
    For example - a audio file turned into a loop and transposed:

  • My keyboard does not work after cleaning :-(

    Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?

    Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
    From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28

Maybe you are looking for

  • Start/Field Routine in Transformations (ABAP)

    Hi Experts Please update me on how to proceed and ABAP Code required. DSOFULL->CUBE DSO Active Table: /BIC/AEMPPED00 Data In DSO Emp_ID--Emp_SDATE--Emp_TDate 1-----01.01.2008 1---01.01.2008--01.06.2008 1-----01.01.2008 Data Expected in CUBE Emp_ID--E

  • Print, Export and Page Navigation Buttons in the Report

    When I view a report through CR4E, the generated report has 3 buttons namely Print, Export and Page Navigation buttons. But when I click on either of the buttons I get a 'null pointer exception'. This is a critical error as I am unable to navigate pa

  • Some hypertext links broken in generated PDF

    Hi all, I'm using FM 8.0p277 to generate a PDF of a book which uses hypertext TOC links to different chapters and topics. We've been using the same process for some time without any problems: Generate TOC -> Print book to .ps -> run Distiller. Howeve

  • Why are my colours dulled in indesign?

    Hi team. I guess this is something to do with my colour set up. basically I am in the process of creating some simple one colour graphics in illustrator. And in illustrator they look just how I want nice and vibrant. However once I place them into in

  • Transfer photo to iphone

    i having problem , how to transfer photo from my mac book (iphoto) to iphone ? anyone can advice me how to transfer the photo. thank