Toggle on/off Notifications system wide

Seeing as how there is no iOS community (don't see it anyway), I'm asking this here.
I don't think it's possible, but it would be nice to toggle on/off Notification center system wide. As it is now, I have to turn Notifications off for each individual app.
Sometimes i want NO notifications at all (like while watching a movie with someone who I might not want to see all of my notifications) and it would be easier to just turn them off, with one toggle, and turn back on again when I am ready to have notifications again (remembering which apps I had notifications turned on and which ones I didn't).

Do Not Disturb
http://support.apple.com/kb/HT5463
Message was edited by: Demo

Similar Messages

System wide alert(notification)

Can we show system wide alert(notification) using any of the J2ME MIDP 2.0 function. It is something like we have our MIDlet is runing, and the we move to some other screen, likeContacts or Message, and afterwards some activity takes place in our MIDlet running in background, so can we show some notification or alert at that time to let user know for that activity without being actually in that MIDlet.
Do reply.

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

I cannot turn off the system update notification for my G2? I have already tried turning it off in Settings (under Applications Manager). What else can I try? Thanks

Dear All,
I have tried turning off the system update notifications for my G2 and have not been successful so far. I have already tried turning it off via Settings/Application Manager/All. What else can I try here? Thanks.
Regards,
Jeffrey Wong

Unfortunately that is not possible any longer. My advice is to take the update. You'll have to at some point or either you'll accidentally accept it. The HD voice and video works well between compatible phones. And, if you run into a problem, better now than later.

Setting ALSA sound card system wide (rather than just in KDE)

Hi,
I've got an HTPC with an ATI Radeon HD 4350 graphics card running Arch x86. It has its own integrated sound card for outputting audio via HDMI, which is detected by ALSA as a separate device. I've managed to set it as the default audio device in KDE 4 (via System Settings). This allows applications such as Amarok and SMPlayer to properly output audio to the HD 4350's integrated sound card, but software such as Flash and MPlayer (from the command line) are still outputting audio to the motherboard's built-in sound card. How can I change this setting on a system-wide level? I've tried running alsaconf as root and adding
pcm.!default {
type hw
card 2
device 3
to ~/.asoundrc; I got the card and device numbers from aplay:
[htpc@exia ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is the output from MPlayer when I try to play a video, complete with errors regarding audio:
MPlayer UNKNOWN-4.4.0 (C) 2000-2009 MPlayer Team
137 audio & 296 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /tmp/FlashmvWXPy.
libavformat file format detected.
[flv @ 0xac7d250]skipping flv packet: type 18, size 294, flags 0
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [H264] 854x480 0bpp 29.970 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
FAAD: compressed input bitrate missing, assuming 128kbit/s!
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '2'
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:3985:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
[AO_ALSA] Playback open error: No such file or directory
[JACK] cannot open server
[AO SDL] Samplerate: 44100Hz Channels: Stereo Format s16le
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '2'
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:3985:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
[AO SDL] Unable to open audio: No available audio device
DVB card number must be between 1 and 4
AO: [null] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 854 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 854x480 => 854x480 Planar YV12
Thanks!
Last edited by w1ntermute (2009-06-28 18:40:03)

whoops wrote:Do you use the motherboard sound-card?
No.
whoops wrote:If not - did you try just turning it off in bios (or blacklisting the driver)?
No, I haven't tried that. I'll give it a shot. Thanks for the tip!
Last edited by w1ntermute (2009-07-02 18:11:53)

HT5362 How do I turn off notifications for Software Updates? 'App Store' doesn't show in the list of notification apps. I want the background checks for updates, just not the notifications.

How do I turn off notifications for Software Updates?
In the 'Notifications' section of the 'System Preferences' app, there is no tab for managing the notifications of System Updates nor App Store.
Hey--- I like auto-checking for updates, and hey--- I like auto-downloading them in the background.
BUT I do not like being notified of updates in the middle of working! Especially when it's iTunes updates. Grrrr.
Any chance this is easy and I just missed it?
THANKS COMMUNITY!

Settings > Notification Center > Mail > Select the mail account (if more than one) > Alert Sound > None

Non-system wide DNS Lookups on RBL (i.e. logical groups supported)

Sun Java System Messaging Server documetation seems to state that RBL filtering can only exist in one of three files that are used for filtering based off of inbound connection IP address. My question is, can conditional execution occur for a section of one of these files based of destination e-mail address?
I'd like to have multipule levels of e-mail filtering using RBL and allow users to be assinged to the level of filtering they desire by joining a logical group which will enable a level of RBL filtering for that logical group.
Any help is greatly appreciated, as far as I can see, I can only have one system wide filtering set, so I can't possibly have one set of e-mail ids using 10 RBL (remote black lists) and another group e-mail ids using a smaller set of RBLs.
======= From the documentation =======
MAIL_ACCESS : Used to block incoming connections based on combined information found in SEND_ACCESS and PORT_ACCESS tables: that is, the channel and address information found in SEND_ACCESS combined with the IP address and port number information found in PORT_ACCESS.
ORIG_MAIL_ACCESS : Used to block incoming connections based on combined information found in ORIG_SEND_ACCESS and PORT_ACCESS tables: that is, the channel and address information found in ORIG_SEND_ACCESS combined with the IP address and port number information found in PORT_ACCESS.
PORT_ACCESS : Used to block incoming connections based on IP number.
====================================

Alas, the RBL stuff is done before iMS even knows who the message is addressd to. That stuff is done at the initial connection phase, as our philosophy is to reject a message just as soon as possible . . .
After the message is accepted, then you can opt-in/out for things like spamassassin, brightmail, etc.

Disable font-smoothing system wide

I want to disable font-smoothing (anti aliase) system wide for mavericks operating system. I already turned off font smoothing for LCD from system preferences (in general).
But it still shows blurry for small fonts in my editor (Zend studio for Eclipse). And it make totally impossible to read small codes.
Any help would be great.

It's definetely the issue. This worked for me: https://bugs.eclipse.org/bugs/show_bug.cgi?id=382972

Documentation for Notifications system in iOS 5?

Is there any detailed documentation for the new Notifications system in iOS 5 that explains how it works, and in particular how the various pieces (alerts, banners, the Notification Center, the lock screen) interact with each other? I downloaded the latest User Guide for iOS 5.0 and it doesn't provide much detail at all.

This may help:
There are a number of issues to fix this:
1. You cannot view the "Notification Centre" from the lock screen.
2. You can have all your NEW notifications appear in your lock screen by changing the settings in Settings>Notifications>(and then select that app).
3. You also have to ensure you are allowing notifications within the App itself, inside the App's settings.
Here are a few hints:
If you have the "Alert Style" set to "None" - they won't show up, even if you turn them "On".
If you set to "Banners" they will show up as Banners while your phone is unlocked, and also as a Banner on the Lock screen (if the lock screen setting is set to "on"). From the lock screen you can "swipe" the notification, and it will take you right to that app.
If you set as "Alerts" - it will require you to select an action before proceeding - in which case you must "unlock the phone", and the rest of any notifications on your lock screen will not longer be considered new - and won't show up again when you lock your phone.
My recommendation: Set them all as Banners, and then you have more options. Once you "Unlock" your phone, all of them will be removed from your lock screen, but you can then see them in the Notification Centre.
Some exmples:
Facebook: you need to select Settings>Notification>Facebook. If you want your notifications from Facebook to show up on your phone, select "Notification centre: ON". Select the Alert Style. If you want to see them in your lock screen, turn "View in Lock Screen:ON." THEN, go to Settings>Facebook>Push Notifications, and select the ones you would like. They will show up on your phone.
EMAIL: Settings>Notifications>Mail.If you want your notifications from your email accounts to show up on your phone, select "Notification centre: ON". Select the Alert Style. If you want to see them in your lock screen, turn "View in Lock Screen:ON." THEN go to Settings>Mail, Contacts, Calendars>and select the Mail Account you would like notifications for.. Depending on the account type you may need to change your "push or fetch" settings.
TEXT: Settings>Notifications>Messages If you want your notifications from texts to show up on your phone, select "Notification centre: ON". Select the Alert Style. If you want to see them in your lock screen, turn "View in Lock Screen:ON." If you want to see the whole message, select "Show Preview: ON", "OFF will just display the name of the person who sent the text".

System Wide Permissions Problem

I have a MacBook Pro, OS 10.5.8, which I've been using since 2009, and this is the first time I've encountered the problem described below.
I'm suddenly having what seems to be a system wide permissions problem. Tonight I found I couldn't add a new folder (the option was grayed out), and I noticed a pencil icon with a line through it at the bottom of the window. When I chose Get Info for that window, my name was missing from Sharing & Permissions. There was also a new name, "wheel", which I've never seen before. (3 names in all: system, wheel, eveyone.) This affects a lot of folders stemming off the HD (Applications, Library, etc.), but my user folder folder is unaffected.
I've rebuilt the permissions several times in Disk Utility, and also repaired the disk after getting an error message when verifying. But the permissions problem is still there.
So I'm wondering what in the heck could have caused this, and how can I fix it?
I found I could add my name back to the permissions list in one of the affected folders, using Get Info, and this solved the issue for that folder, but there are a LOT of folders with the same issue. Perhaps if I did this with the HD folder, and selected the "Apply to enclosed items" option at the bottom?
FWIW, we just bought & set up a new iMac, OS 10.8.2, last week. I looked at a number of folders on it using Get Info, and it seems to be configured pretty much the same way with regard to permissions, which is a little spooky. Don't know if it makes any difference, but I used the same user name, login password, apple ID & password when I set up the new computer as I have on my Macbook. Could that have caused this somehow?
Thanks for any help or thoughts.

Thank you, BDAqua for the link.
I use my MacBook Pro mainly for creating music (DAW program & plug-ins). I've occasionally had to change permissions on individual plug-ins, but never to a group of folders on this scale.
I'm wondering if there's a way to get my old permissions back, or if I should leave it as is at this point, and add my user name to the permissions on individual folders as the need arises? Don't want to screw everything up, as this is getting a little over my head.
Any recommendations?

System Wide RTSI Trigger - Multiple Instruments

Hello,
The application design requires a group of VIs whose job is to select a test point, look up what device and channel it is connected to, and then assign it as a trigger on the RTSI bus. The four instruments will then use this RTSI channel as a system wide trigger.
For example, can a VI assign Channel 3 on Device 1 as a trigger on RTSI Channel 0; then a completely separate VI that contains the driver for Device 1 (and is responsible for data acquisition) utilizes RTSI 0 as it's trigger (the same trigger that it is supplying)? There are four instruments, and the trigger can be selected from any channel on any of these instruments.
Or, does the trigger have to be set at the time of acquisition, t
herefore, amidst initializing the driver?
Thanks for your help!
Mark Roberto
MD Robotics

Mark,
Here is how you can setup were to look for triggers. When we set a DAQ board to trigger we use Trigger Config VI which can be found in the advanced pallettes for Analog Input, Analog Output, and Digital I/O.
When we want to route the trigger setup in Trigger Config to the RTSI bus to make the signal available to other DAQ boards then we use Route Signal for E-series and Analog output boards or RTSI Connect for 653x boards.
Regarding he question about assigning channel 3 on Device 1 as a trigger on the RTSI channel, this is not directly possible.
The RTSI bus only takes digital signals and therefore you can not route an Analog signal on channel 3 to the RTSI bus. However you can setup Device 1 to trigger off an analog trigger (if the DAQ board supports Anal
og Triggering) and then pass the digital trigger that is set over the RTSI bus.
When you set up analog triggering you can only specify the first channel in your channel string as the analog trigger source. In this case you can not monitor 4 channels and trigger when either of the 4 channels reach a trigger condition. You can only monitor one channel for the trigger condition.

System wide mini malfunctions

I have a mac mini i5 (2.3 GHz mid 2012)
OS X 10.8.3
I have multiple log in accounts (main, kids etc)
I upgraded to Mountain Lion a few months ago and just now realized there are system wide malfunctions going on.
Prior to upgrade, I backed up, wiped the drive clean, then installed Lion and a week later upgraded to Mountain Lion.
Problems:
Loging into account C: I am greeted with a "Enter iCloud ID or create a new one" then another screen saying "Enjoy your computer." I have entered the info at this prompt and am greeted by the same prompt the next time I log in. I have had an icloud account for months and this info is entered in the Pref Settings as well. It is as if the computer is not remebering the info I am entering.
Login items that have been turned off, will be turned back on after login or reboot.
Account A- Finder - if I customize the side bar of the finder window, it will accept the changes for my current session, but if I log out or restart, the customization is reverted back to the default
Mail - opens two window upon launching, it will not remember my toolbar customization (similar to the finder side bar problem above)
will not remember changes to pref settings like "move junk mail to trash"
Account B Safari will not remember auto log in info.
I've tried repairing disk permissions
I've gotten advice to delete various .plists and data states.
None of this has helped. I feel like I'm working on a computer in the public library. Urrggh!

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Fresh install, random 100% drive usage and system wide lag.

Hi there, i just fresh installed Win 8.1 after having the issue of a svchost thrashing 100% disk access for minutes at a time and lagging whole system inc mouse pointer to the point that apps and games start to crash and the issue has not gone away.
I had also had the issue on old pc using different drives.
This is the 4th system where ive seen this behaviour in Win 8 since launch and was wondering if there is a fix yet? It happens on my 2 pc, my mothers laptop and a friends desktop, all with different hardware, 2 factory installs and 2x fresh installs
from untouched iso's.
It happens randomly when nothing is running on pc or sometimes when gaming or using apps and makes the desktop unresponsive for minutes at a time and sometimes crashes apps with it due to the system wide lag. Even ctrl alt deleting can take several
minutes for the menu to appear or even start Task Manager.
Ive managed to catch 1/2 the issue with procmon but due to taking so long for apps to launch while the lag happens i can only get the last 1/2 of the trace which shows a mix between a svchost, explorer.exe and wmiprvse.exe thrashing the system to a standstill
while accessing almost every file and reg key on the disk to over a million events recorded in procmon.
IS there a fix for this or a way to check the procmon trace to see exactly what service or task is causing the thrashing? I think whatever it is is buggy/broken, running at realtime and is blocking anything else from using the system until its done,
which lags the system.
Surely even an overloaded drive wouldnt cause other apps or the mouse to lag/hang so badly to the point of crashing and even Xp or Win 7 wouldnt lag/hang the desktop due to a busy drive.

Gerg
In order to diagnose your problem you will need to download and install the below
Install the WPT (windows Performance Toolkit) http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt.aspx ,
When you have open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following
First level triage, CPU usage, Disk IO. If you problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry)
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

System-wide alarm in iPhone SDK

Is there an equivalent of CalAlarm class in the iPhone SDK? Does anyone know how else we can set a system-wide alarm?

Until push notification is added to the SDK, you cannot set a system-wide alarm.

Why does my ssh tunnel drop when I switch on a system wide proxy

The subject says pretty clearly what is puzzling me. After I establish a connection via ssh and initiate a tunnel for email access through a corporate firewall (using Apple Mail as the client and POP3 for the protocol), I find that enabling a system wide proxy (socks5, http, and https) via the same ssh tunnel causes the email to stop working. Upon switching, the http proxy (Safari) works fine -- e.g. the tunnel is healthy. This confuses me. The ssh link which hosts several tunnels is fine. I am forwarding local port 10025 and 10110 on the tunnel to a mail server behind the firewall. The socks5 proxy and http proxy are running on local ports 11080, 18080, and 18080, respectively. Why is Apple mail paying attention to the proxy settings at all? It would seem that since Apple Mail makes no attempt to connect (via the Activity window) that the link is dead, however, turning off the proxy brings the email tunnel back to normal. Wierd. Any advice? This is running on a normal 10.4 (not server), but I don't think there are any significant differences in behavior. I asked on the networking discussion, but got no response.

Two things jump into my mind: poor WiFi signal strength on the desktop PC or a dirty OS installation on the desktop PC. I'm quite sure that this has nothing to do with the cisco VPN client itself.
Assuming that you reach your remote workspace through the cisco VPN client it might also be that the remote part (the VPN concentrator) gets congested and drops your connection but than other employees would complain as well (can be checked with your ICT guys).
The thing is: when you lose Internet connection on your laptop while surfing a web site and connection comes back again within no time you won't notice anything. If the same happens to a system constantly receiving encrypted packets and some are missing the VPN client will drop the connection. Completely different protocols (http/ipsec) that are differently prone to packet drops...

How remove saved system-wide default for a column

yesterday I saved a system-wide default for a column with a custom column heading and data format.
now, when I drag this column in a new analysis, obiee shows no column heading.
I've tried to save my custom default again or reset to column-default but with no results: the column heading is still empty.
How can I fix this problem?
thanks
Luc

Hello,
What OBI version are you using?
Enter some other custom name for the column (e.g. same as default one) and save it as system-wide. I guess, you have already tried, but...
1. Stop Presentation Services.
2. Go under web catalog in the file system and locate folder \root\system\metadata. This folder contains files storing subject area attributes, including system-wide settings. I the folder find 2 files named similar as the subject area which column you have modified (name will be in lowercase, spaces replaced with +). For example, for "SA System" subject area these files are named as "sa+system" and "sa+system.atr".
3. Backup these 2 files you have found (better whole presentation catalog).
4. Try one of the options:
Option 1: If you have another version of these files (in the backup or other environments) - try to replace them. There is a risk you will loose some other column settings (or inherit new).
Option 2: Modify the file without extension (it contains XML code inside): locate the string similar to your column name. Remove whole section ONLY for the column you have found between tags <sawsavedformat:columnSavedFormat and </sawsavedformat:columnSavedFormat>.
Below is sample code for column originally named as "Pager" under "User" folder in "SA System" subject area.
<sawsavedformat:metadata xmlns:sawsavedformat="com.siebel.analytics.web/savedformat/v1.1">
<sawsavedformat:columnSavedFormats>
<sawsavedformat:columnSavedFormat xmlns:saw="com.siebel.analytics.web/report/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="sawsavedformat:regularColumnSavedFormat" columnName=""SA System"."User"."Pager"">
   <saw:displayFormat><saw:formatSpec suppress="suppress" wrapText="true" hAlign="left" vAlign="top"/></saw:displayFormat>
   <saw:tableHeading><saw:caption fmt="text"><saw:text>User</saw:text></saw:caption><saw:displayFormat/></saw:tableHeading>
   <saw:columnHeading><saw:displayFormat><saw:formatSpec/></saw:displayFormat><saw:caption fmt="text"><saw:text>Pager New</saw:text></saw:caption></saw:columnHeading>
</sawsavedformat:columnSavedFormat>
</sawsavedformat:columnSavedFormats>
</sawsavedformat:metadata>
Option 3: Just remove these 2 files. Naturally, you will loose all the settings, not only one you like to get rid off.
5. Restart presentation services.
Hope, this helps.

Toggle on/off Notifications system wide

Similar Messages

Maybe you are looking for