Toggling between video clips (not audio clips) in the timeline

Hi,
I was wondering if there is a solution to this small inconvenience I am experiencing in FCP 5. When I have snapping enabled, and press the down arrow key, the playhead jumps to the next audio or video clip in the timeline. I am trying to find out if there is a way to jump between video clips only.
Thank you
-Peter

Thanks,
Do you know if there is a way to make the up/down arrows snap to only the video cuts on the video clips in the highest video tracks in the timeline? Thanks.

Similar Messages

How can I lock video clips to the timeline?

Hello Apple discussion.
I know that holding down the command key disable ripping when triming.
But that doesn't work when deleting clips. It would be useful to lock videoclips to the timeline, so they keep their position.
Lock audio to playhead doesn't help the situation.
Thank you for your time
Attila

You cannot lock a video clip to the timeline. The program is designed so that when you delete a video clip, the other clips slide over to fill the gap. Otherwise you would have holes all over your project, or have to manually move them over. You would want to lock the audio clips to the non-deleted video clips, so that the audio slides over with them.
If you want to preserve the gap left by a deleted video clip, first insert in front of it a black clip of the same exact duration, and then delete the video clip. The black clip would hold all of the other clips in position, but leave you with a black hole to fill or delete. To make a black clip, separate two video clips on the timeline, and control-click on the empty space. In the resulting drop down menu, select Convert Empty Space to Clip. Then control-click on the black clip and in the resulting window adjust the time duration by overwriting the values in the time box and then clicking the Set button.

Re-importing synched audio to video clips in the timeline

Hello, i have edited together a project with a whole bunch of clips and i unlinked the audio and deleted it to replace it with music but now my client wants the original audio back.
Is there any way of automatically reconnecting the audio to the selected video files in the time line?

Welcome to the forum robz85!
Fastest way to do this:
1. put the playhead over any video clip you need to add the audio to in the timeline. Doesn't matter where within the clip you set the playhead... just don't move it after step 2 nor move it in the Viewer after step 2)
2. With the Canvas active, type f.
3. connect the audio to the tracks you want to add it to in the timeline window on the left (connect the track buttons) then type F11 to perform a replace edit.
4. If you have filters on those clips, copy the video only clip in the timeline first (cmd+c)... then after you perform the edit, right click on the new clip that includes the audio, and select "paste attributes" from the contextual menu that will show up... add the filter(s) back... or motion attributes if you've changed those).
Jerry

Why is it, if i have one video clip in the timeline, i can't just add a transition at the end of that solo clip to fade to black!?! please help!

hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

Pick only video and not audio to edit in timeline

How can I only move the video and not audio to the timeline when I pick a clip I want?
Everytime I drag it to the timeline it brings the audio and video and I have to unlink it and then delete the audio.

Disconnect the audio in the patch panel at the left end of the Timeline window. Click the a1 and a2 source tabs to disconnect them from their destination tracks (A1 and A2 by default).

FCP7; "unmerge" merged audio and video clips in the timeline?

Our TC was way off in some areas due to a bad timecode lemo on set. My editor synched by slate then merged the video with an audio mixdown track using the in points. Now when I export an EDL the original TC from the audio clip is gone, so he has no reference for matching up the audio. Does anybody know of a way to un-merge these clips and restore the original filename (audio takes the name of merged video but reveals correctly in finder) and timecode? Thanks.

what happens if you match frame the audio? I would think it would match back to the source audio clip which you could then use to replace the audio in the timeline.

Anyone had video just not play when on the timeline?

Video is just not playing when pulled down to the timeline. Seems to resolve itself for a bit after I reboot the program.

Using optimized media should be fine to work with given those specs.
Does the problem happen often? When you say it doesn't play, I'm not exactly sure what you mean.
One thing to check for is that the timeline scrollbar hasn't moved (vertically) so that the issue isn't just that you can't see it due to a scrolling issue. This has happened to me a few times -- especially when zooming in/out. I think it's a bug. But all you have to do is scroll up to get your clips back into view.

Relink audio to video clip pasted in timeline in FCP7?

Hi, I need to add the original synced audio back into a montage I made in FCP7. I originally made the montage by pasting video clips into the timeline without their corresponding audio - instead of simply pasting video and audio for each clip and muting the audio like I used to (somehow I thought this new way would be easier). Each clip in the montage was cut using in and out points on their respective source clips, but in some cases I've used those source clips for other sequences so the in and out points I'd used for the montage aren't all still saved. What is the easiest way to reinsert each clip's audio without manually cutting each in and out point again?
Sorry if this is a beginner's question! I hope I explained it well.
Thanks,
Adam

Park on the first frame of the clip. Press X to mark IN and OUT on that clip. Then press F to matchframe to the source. Then F10 to cut the clip, and it's audio...into the sequence.
If you map the audio tracks first, then it's very quick. X...F...F10. X...F...F10.

Video file diseppear when draging the clip to the timeline

When I drag my video clip into the timeline the video sequence diseppear, the audio is the only thing that is able to drop into the timeline. The problem arose a few days ago, i think i messed up some settings but I do not know what I did. What should I do?

Do you have your source patching and track targeting correct?
MtD

Gaps between clips on the timeline

I wonder if there is a way to gain control of moving clips on the timeline. If I grab a video clip on the timeline and drag it left, it bumps the adjacent clip and moves it left. If I haven't let go of the mouse and move the held clip back towards the right, the clip I bumped doesn't go back to its original position. If I leave the held clip where I dropped it, there is now a gap, which looks bad and can mess with the playback in iMovie.
I would like a way to drag clips so that they butted up to the adjacent clip without moving it. I would also like a way to remove any gaps in one fell swoop.
I am relatively new to the app: but to remove a gap, the only (lame) way I can see to fix it is to manually move each clip to the right of the gap. But because the clips that I would bump can move, that screws up everything. There must be a better way.
thanks,
Jim

Catspaw's solution is a good way to remove all the gaps. Note that to see the gaps represented as "Black" clips (instead of gaps) you must view the Timeline in Clips mode. Click on the little rectangle icon above the left end of the Timeline.
Gaps disappear as you describe when you've previously added a gap by dragging a clip to the right. Creating that gap was probably a mistake, so losing it isn't usually a problem. If the gap appeared when you moved a clip right, the Edit > Undo Move command lets you undo that move.
If you created the gap intentionally -- to serve as a placeholder for a clip you want to add later -- you can make it "permanent" by changing its color from black to some other color. (With the timeline in Clip mode, double-click on the "Black" clip to change its color.) Now the gap won't disappear as you drag clips towards it.
All dragging functions are made easier by turning on these two features in iMovie preferences: 1) Snap to items in Timeline and 2) Play sound effects when snapping. When you drag a clip it's a lot more likely to land where you want it.
Karl

Loosing clips in the timeline with PE7

The good news, I got my quadcore 2.4 Ghz.
The bad news, the same problem as with my old PC.
Between my clips on the timeline is sometimes a small empty space (Why??). When I drag the clip 2 frames to the left (+Ctrl), suddenly a clip somewhere to the right vanishes or gets considerably smaller.
Ever seen before?
Adobe is making life not easier...
Rob

Thanks. Snap is enabled.
I added 30 clips at once from the project bin onto the timeline. So I was really amazed that there were small gaps between some clips.When I tried to repair this (hold CTrl and move the clips to the left) the puzzle began. It happened that moving the clip only three frames to the left, I lost 15 seconds of the total. I discovered this was either a total loss of a clip (not he one I moved, but a clip say three clips to the right) or it was considerably shorter in time.
First I thougt it had to do with my good old dualcore (1.8Ghz), but on the new one (Quad 2.4Ghz) it is still the same.
This is the first time it happens (after 3 completed small projects).
From now on I will only drag one clip at the time to minimize the chance on this behaviour.
But you will understand, I'm not happy...
Rob

My vidoe clips in the timeline have changed to a screen that says "offline media" in six different languages

my video clips on the timeline have changed to a red screen that states in six languages "offline media support"

frustratedusere
What version of Premiere Elements are you using and on what computer operating system is it running?
If you opened a previously saved closed project and were greeted by a colorful media offline display and "Where is the file.....?" messages, there are at least two possibilities.
1. You have move, deleted, or renamed files and folders that you imported into the project after you saved closed the project.
When you import media into the the project, all you get in the project are copies of the originals which are at a hard drive save location. However, the project needs to
trace back to those originals at the location where they were when you first imported them into the project. You can use the "Where is the file....?" messages to reconnect
your source media to the project. Can be time consuming and a nuisance.
2. If you stored the project's source media on an external hard drive and that drive changed drive letter for some reason, this would create a media disconnect situation.
Correct the drive situation if this applies to you.
Please review and consider and supply more details. We can discuss this and other related matters (such as use of the Project Archiver) depending on your details.
Thank you.
ATR

How can I match sound quality between video clips and audio clips?

Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
      but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
      recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.

Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
     The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Toggling between video clips (not audio clips) in the timeline

Similar Messages

Maybe you are looking for