Tolerance for time when using .gpx files to geotag
Okay, so we had our trip all planned and landed on Sunset Beach in Florida for a week of sun and fun. Planning to takes many photos, I bought and installed GeotagPhotos for my iPhone. While I wasn't the best at turning it on when I should have, I did manage to get several tracks. However, when I import those tracks to LR4, select all photos (474 of them) and ask LR4 to 'Select Photos on TrackLog', it selects no photos.
I have manually checked dates/times of photos with dates/times in the tracklog, and they are similar, but maybe not exact (down to the second), so my question is:
Does LR4 use a tolerance on time? If so, what is that tolerance?
Thank you for your response. It prompted me to recall that I had Motion-X for my iPhone. I installed the updated version and tested it. It worked perfectly. Not sure what's going on with GeotagPhotos, but it wasn't accurate at all.
Again, thanks.
Similar Messages
-
3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - JThanks Allan for your quick response to my amateur questions.
Allan: I'm running version Mac OS X Version 10.6.8 PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067 MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me! - John Garrett
PS.
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f17
Serial Number (system): W8*****AGU
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host> -
For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC -
I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet -
Photobooth crashes every single time when using Motu Hybrid MK3 audio interface?
Photobooth crashes every single time when using Motu Hybrid MK3 audio interface.
It is happening on my late 2013 IMAC, and also on my old 2011 Macbook pro.Same thing here with Mavericks and M-Audio Fast Track Ultra. Very easy to reproduce, Apple. Set your audio interface for the external device, try to record Photo Booth video. It will crash. Every. Single. Time. Always.
-
Why is the response time when using clickwheel...
I've bought a new 60gb video and, in comparison to my 20gb 3rd generation, the response time when using the clickwheel (next track/pause/play/bak track) is annoyingly long on start-up. And the display takes seconds to catch up with what's playing sometimes freezing with half of the one 'page' showing and half of another. Should I expect this because of the larger capacity/more complex iPod?
Also, in an earlier post I noted that when the iPod first fires up, tracks seem to stop and start - just for a second or so, 3 or 4 times within the first 15 seconds. It's not the track on iTunes as it never happens on my 3g.
Dell Windows XPDefinately sounds like a faulty harddrive.
You could always try restoring it with the most recent updater, and reloading everything - kind of like a fragmented harddrive, I am noticing better performance since I last wiped it clean and relaoded it (due to another error - actually).... -
Error when using %@ include file="/test.jsp"%&
UsingNitrox version 2.1 M3 (build 419 06022005):
with jdk version: 1.5.0_03 and Tomcat 5.5.9
This is the error :cry: when using <%@ include file="/test.jsp"%> in jsp:
Severity 2
The type java.lang.Object cannot be resolved. It is indirectly referenced from required .class files (test.jsp)
It used to work in previuos version of Nitrox. I can't use struts tiles because the tiles content is dynamic (run time) and I need it to be static (at compile time).
Have you encountered this problem? What is the fix? Nitrox bug?
I need your help please,
AlbertoM7,
I found the problem :wink: . In the java Build path having the default (ALL) is not picking up the content of the package. I had to use add multiple and include all the folders and subfolders (many L) in my packages. After that I added *.java and *.properties to select all the java files. Now it is working. I assume this is a bug in Nitrox. The default ALL should include the all the files in the path.
Thanks,
Alberto -
Can´t upgrade to mountain Lion because says that my HD is only for Time Machine use
Can´t upgrade to mountain Lion because says that my HD is only for Time Machine use, what can I do?
The installer is probably finding a file called backups.backupdb
That is where Time Machine stores it backups so it figures it can't install there
The Time Machine backup should never be done to the system drive but another drive instead
Allan -
Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?
Not having the problem, don't personally know anyone who is.
-
I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!
That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies -
can you download songs from itunes match from the cloud to your iPhone ie for times when you dont have internet connection?
Unless you have an Internet connection you cannot access iCloud. You can download your music from iCloud to store permanently on your iPhone, but only when you have an Internet connection to do so.
-
Stack File for JSPM when using Maintenance Optimizer
Hello,
As you know JSPM looks for a stack file when applying a support pack stack. When using maintanance optimizer I see no way to get a stack file. I end up having to do the work twice: once to get the files in maintenance optimizer, and again I have to go to marketplace swdc to choose the files and create the list of downloads again only to save a stack file.
Am I missing something? Is this double work really necessary?Hello John,
It seems that you are doing double work.
If you use the download type as "SLM" then you have a chance to transfer the XML to SLM. Else if you choose the download type as "Download Manager" then the XML should be created in the EPS/in folder of the Solution Manager system.
You also need to check whether you have applied all the applicable notes for the Solution Manager stack from the note 1122966 and that the BC sets for MOPZ are activated correctly.
Finally check the permissions on the EPS/in folder of Solution Manager to check whether there is a issue with authorizations.
A SLG1 log ( filtered by the username who creates the MOPZ transaction and time at which the transaction was created ) will reveal the errors in the process.
Regards
Amit -
SPEC FOR LAP TOP when using mainly files audio
Hi guys,
At college I found the computers would crash when all my live audio/several midi tracks were played together and put this down the the lack of ram and hard drive.
I record all live instruments sometimes many tracks are created and macs I have used before can't handle it.
I want to purchase a lappy wondering what audio logic pro users recommend for a spec ram/hard drive
Do you use this on a lappy and does it crash??Hi,
I use Logic Pro on two laptops. a MacBookPro2,2 with Intel Core 2 Duo running at 2.16 GHz and 1GB memory.
And a iBook Core 2 Duo running at 2.0 GHz and also 1GB memory.
Here's the key:
I use EXTERNAL FIREWIRE HARD DRIVES
For all my projects, song files, audio, etc...
This way it runs very very well.
Cheers -
Use external drive for Time Capsule backups AND file storage?
I have an external drive formatted by my MBP. I'm using it to store my iTunes music library and iPhoto pics. Can I use the drive for Time Capsule backups as well?
Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine
-
"Hide" External Drive for Time Machine use only
Hi everyone,
I have an AirPort Extreme with 2 External Drives connected to it on wi-fi. One with 500GB I use for "File Server", so all computer in my network can store files on it. The other one, with 1T I use as Time Machine backup ONLY (over wi-fi).
It's all working perfectly. But when using a computer on the network, I was able to see that the Time Machine drive is 'visible' to be used as a 'file server' as well if the user wants to.
Is there any way I can 'hide' this external drive, so it can be seing only by Time Machine?
Maybe it's not possible but it is worth asking.
Regards!
Ricardorslora wrote:
Hi everyone,
I have an AirPort Extreme with 2 External Drives connected to it on wi-fi. . . .The other one, with 1T I use as Time Machine backup ONLY (over wi-fi).
It's all working perfectly.
That may not last. Backing-up that way is "iffy" and +*not supported by Apple.+* See Using Time Machine with an Airport Extreme Air Disk (or use the link in *User Tips* at the top of this forum). As it says, if you continue backing-up that way, strongly consider keeping secondary backups, if you don't already.
Maybe you are looking for
-
Today, I lost a number of events from approximately Dec 1st forward. All prior events are still there but some are repeated multiple times. Some of the current and future events however are not missing. After some head scratching, it appears that ica
-
My front panel display updates every 20secs. I want to be able to view the Labview front panel on a web-page which updates itself continuously. Will Lookout do this?
-
For example, she often works away and we both obviously would like access to the photo library while she is away. Upon her return I would then need to sync the library with any new photos either of us has taken. We also both have iPhones with separat
-
HTTP error 500 on Content Server test (RSCMST), after CS migration.
Hello all, I have migrated a Content Server 6.30 system from HP-UX and MaxDB 7.3.00.42 to CS 6.40 on Windows and MaxDB 7.7.06.15. While the migration of the database and the install of the CS 6.40 seems to have completed successfully, I am having tr
-
Portlet editor's rich text editor gives javascript error 'access denied'
I created a header portlet using the Publisher's published content portlet template. When I try to edit the portlet content using the rich text editor in the portlet editor window, I get a javascript error in the status bar stating 'access denied'. I