Tolerance limit for Components in Process Order

Dear Friends,
As we can provide underdelivery / overdelivery tolerance for GR of process order, likewise is it possible to provide tolerance for BOM components in process order?
The requirement is like that confirmation should be allowed with GI done within + / - 5 % of BOM qty in process order. Is it possible to cater this requirement with any exit / BAdi?
Kindly help with your valuable inputs.
Thanks in advance.
Regards,
Tejas

Dear,
Thanks for your prompt reply. Actually I have been already working on this exit only.But me & my technical fellow are stuck up for build logic for tolerance limit. It is working to restrict confirmation till GI has been done. But we are unable to give provision of tolerance limit for GI with this exit.
Can you pls share more details about writing logic for it?
Regards,
Tejas

Similar Messages

  • Tolerance Limit for Price Variance (Purchase Order)

    Hello,
    Business Case :
    Final users require a specific tolerance limit rate for Price variance in Freight services POs.
    We have a current rate set up at Company level
    --> standard customizing (MM / Purchasing / Purchase order / Set tolerance limit for Price variance)
    Do you know any way to set up diffferent tolerance limit depending on the purchasing flow ? Vendor level for example ?
    thanks for your time.
    regards,

    Thanks for your reply.
    What do you mean by "syestem look for noramal quantity variance from info record" ?
    P.I.R only conatins under and over delivery tolerance, but nothing related to price variance between GR and Invoice.
    I'm looking for a customizing in order to have a Tolerance limit for Price variance at another level than Company.
    At vendor level for example ?
    Do you confirm there is no standard customizing ?
    Any user exit available ?
    thanks
    regards

  • Tolerance limit for GI against production order

    HI
    Is there any standard functionality of having tolerance limits at Goods issue level - against the production order?
    Just like GR.
    or can we make this functionality using any Exits?
    -ashok

    Dear,
    Rstriction of excess goods issue against production order is not possible in standard setting.
    For achiving this you have to go for User exit.
    The logic should be
    In MIGO check mvt. type 261
    Pass the order through table RESB and select all the components with quantity.
    Capture the header material of order and use this as input along with the order creation date, plant and BOM application to explode function module CS_BOM_EXPLOSION.
    This will give you the BOM components which were valid at the time of order creation.
    Now compare these BOM components with the components from RESB with quantity.
    Here conditions will come in picture
    If quantity is exactly matching then GI will be possible
    or if you want to keep tolerance limit say for 10% then accordingly you can map the condition.
    Regards,
    R.Brahmankar

  • Problem in automatic batch determination for components in process order

    hi
    Ours is a process order industry. Here we prepare food items.
    We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
    The batch procedure picked is me0001 for 261 movement type instead of C00001.
    Because of that we need to enter batch manually.
    Send us the procedure to automatic batch determination for components.
    regards
    ravi

    Ravi,
    Before posting please do search in this forum because this topic has been discussed many times in past.
    Please check below links which could be helpful to you Automatic batch determination in process order
    http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
    If you still have issues then please come back.
    Br
    KK

  • Auto batch detmn for components in Process Order selects batch in Q status.

    Hi Gurus,
    We have the following issue with automatic batch determination for component batches for a Process Order:
    Say for a Process Order it requires components A,B, and C.
    The issue is with component C. if the PO requires 100 Qty of C. the system is picking batch X having 80 qty  and picking 20 from another batch Y which is still in u201CQu201D status (due to some defects it is not cleared .  for which inspection should have completed 3 days before Process Order is released).
    Also there are only these two batches for this component in MMBE.
    What I understand is system adds GR date + GR processing days ( for inspection) and release component for production after that (ie., moves to Un restricted stock). Therefore system selects this batch as per the availability check (by calculating the GR+ GR processing date) even thoe it is not cleared yet.
    Also, I want to know If this is correct procedure, how can we make system to not to include batch with Q stock (batch which is having some defects).
    Thanks,
    N.

    Hi
    Use separate Checking Group(Availability Check) in MRP-3 view for comp C with the settings in OPJJ(Availability Check+Checking rule combination) with untick incl.quality insp stock. Idea is to select the un-restricted batch stock qty during Auto Batch determination for Components
    Regards
    Brahmaji

  • Tolerance Limit for quantity in Purchase Order

    How can i set tolerance limits for amounts and quantities for purchase orders?
    Please respond,
    Best Regards,
    AI.

    Hi,
    Please tell me that where I have to do settings according to my requirements,
    either in
    SPRO->Materials ManagementPurchasingPurchase Order--Set Tolerance Limits for Price Variance
    or
    SPRO->Materials ManagementInventory Management and Physical InventoryGoods Receipt--Set Tolerance Limits ??
    Best Regards,
    AI.

  • Tolerance limit for STO orders

    HI
    I want to set the tolerance limit for under delivery and over delivery qty tolerance. Where can we set the tolerance limits for stock transfer orders from plant to plant ?

    Please check OSS notes:
    Note 1093582 - FAQ: Delivery complete indicator ELIKZ
    5. Question
    In which cases does the system automatically set ELIKZ in stock transport orders?
    Answer
    ELIKZ will be set at the goods receipt stage automatically, if the GI = GR quantity. This behaviour applies to intra-company stock transport orders and cross-company stock transport orders. See note 196280.
    With stock transport orders the 'delivery completed' indicator is only relevant when there is no stock in transit The tolerance quantities from the purchase order are not taken into account.(see note 34737).
    It is possible to modify the standard to allow to set the "delivery completed" indicator for cross-company stock transport orders. This modification is contained in note 167795.

  • Tolerance Limit for PO

    Hi Gurus,
    If there is a PO of one lakh rupees and we recieved 8 invoices of 10000 each in reference to that particular PO. We want system to give warning if 80% of PO is exhausted.
    Is there any possibility to do this in System? If yes, how?
    Please revert asap.
    Thank You

    Hi
    Check it out in controlling- internal order -budget and availability control - define tolerance limit for percentage control
    Check it out
    Regards,
    Raman

  • Tolerance Limit for Quotations.

    Hello all,
    Is it possible to set a tolerance limit for Quotations, such that the prices of quotes adopted to Purchase Order cannot be changed over a specific limit.
    Thanks

    Limits are nothing but Target value in quotation. It is the max value.
    But you want to fix the value in PO, So that no one can change.
    you can very well adopt the Version management & Release in PO, for that you can fix the limit & save the PO. If anyone change new version get triggered & document get dereleased.

  • Tolerance Limit for BOM

    Dear ALL
    My client have a following requirment.
    1. At the time of confirmation in Goods movement screen some user change the componet qty. for eg if a FG bom had explode a componet qty of 1 Kg they will do changes & do confirmation of 2kg.
    2. So now my client want that suppose if some one do changes system should cross check it with BOM qty & should allow only by +/- some %
    3. As we can give the tolerance limit for order qty but how to apply tolerance to component used.
    4. is there any userexit for this or i have to developed any Z transation for the confirmation to apply this logic.
    All suggestion are welcome.
    Thanks
    Abhijit Gautam

    Hi,
    Not sure if you have found a solution, but the below BADi & exits might be of help during confirmation:
    BADi:
    WORKORDER_CONFIRM
    User Exits:
    CONFPP01  PP order conf.: Determine customer specific default values
    CONFPP02  PP order conf.: Customer specific input checks 1
    CONFPP03  PP order conf.: Cust. specific check after op. selection
    CONFPP04  PP order conf.: Customer specific input checks 2
    CONFPP05  PP order conf.: Customer specific enhancements when saving
    CONFPP06  PP Order Confirmations: Actual Data Transfer
    Regards,
    Vivek

  • Limit for license key Process Server Service. JCL_ FTP is exceded

    Hi All,
    We are getting strange error in Redwood. Now we are not able to start process servers. Process servers were running fine and we were able to run jobs. For some activities in UNIX server we stopped the unix process server and now we are getting strange error while starting process server
    9:52:51 PM: JCS-102204: Limit for license key Process Server Service. JCL_ FTP is exceeded; limit is 0, changes require 1.
    And we are not able create any new process servers also with job definition type System or Job Chain. While creating we are getting same error.
    We have license ProcessServerService.JCL_FTP with the value true.
    To create new process server we don't need any JCL_FTP license. Don't know why we are getting strange error.Please help me on this.
    Version: SAP 7.00
    Build: M26.10-29140
    Thanks,
    Preethish

    Issue is fixed in next version of SAP CPS

  • Tolerance limit for invoice

    Hi all,
    We have a requirement where we need to put tolerance limit for invoice both at the line item level and header level of the invoice. Also both % and absolute tolerance limits.i.e. if the invoice is 25 EUR or 3% more than the suggested price, it should be blocked. It is true both at line item and header level independently.
    I tried in test systems and at line item level, we could achieve it thru configuring PP tolerance key.
    Also at the header level, BD helps in achieving the Absolute tolerance.
    But how can we configure at header level, % value of tolerance limit?
    Appreciate the help.
    Thanks,

    I don't think there will be separate tolerance limit for header level in invoicing, it will not allow you to post with diff values in item and header.
    Just check and let me know, if this wrong.
    Regards
    TGB

  • 02 STO 's for a single process order

    Hi All,
    Can anyone explain me whether there any problem in getting two STO's for a single process order?
    If its a problem how to generate only one STO for a one process order?

    Hi Mallika,
    can you explain your sceanrio . i am not able to understand your requirement.....
    Regards,
    Venkat.

  • Committed Date For Components in Production Order

    Dear All,
    I m facing this,  Committed Date For Components in Production Order,
    the date appeared as 31.12.9999,
    How can i make this correct.
    please tell me..
    Thanks
    Raghu

    Hi, Thnkx,
    You Are correct, I got this while doing Availability Check, 2 dates.
    Requirement Date, and Committed Date.
    I tried your solution,
    I change the Quantity of one of my BOM , I tried to change the Quantity by Change Number,
    So in CS 03 I can see the Validity of that component up to 01-09-2010,
    I run MRP agian, new planned Order, tried to convert, the question is same.
    I still get the date as 31-12-9999.
    Thanks
    Regards
    Raghu

  • How to find Missing Parts for a particular Process Order?

    Hi,
    How to find Missing Parts  for a particular Process Order ?
    Is there any function module or Table ??
    Thnx in Advance.

    Hi prince roy
    you can use the T-code = <b>CO24 - Missing Parts Info System</b>
    if helpful PLEASE REWARD YOUR POINTS
    thanks
    chakri

Maybe you are looking for