Tomcat 5.025 : i cannot hit my web application

Hi all,
I just upgraded to Tomcat 5.0.25 and i was trying to hit my application as usual using
http://localhost:8080/InterMenu/index.jsp
But i cannot hit the page at all and i get the following error
HTTP Status 404 - /InterMenu/index.jsp
type Status report
message /InterMenu/index.jsp
description The requested resource (/InterMenu/index.jsp) is not available.
I tried to hit a simple html also...but it doesn' t work.
This application used to work fine on Tomcat 4.0.4...
Can anyone help me to find a solution...does it have anything to do with the web.xml file...coz the other inbuilt application works fine...like the jsp-examples that comes with the tomcat...
Thanx...i have been trying one whole day....

hi...here is the error frm the log file
2004-07-05 16:39:39 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
2004-07-05 16:39:40 StandardContext[jsp-examples]ContextListener: contextInitialized()
2004-07-05 16:39:40 StandardContext[jsp-examples]SessionListener: contextInitialized()
2004-07-05 16:39:41 StandardContext[servlets-examples]ContextListener: contextInitialized()
2004-07-05 16:39:41 StandardContext[servlets-examples]SessionListener: contextInitialized()
2004-07-05 16:39:41 StandardContext[InterMenu]Error configuring application listener of class listeners.ContextListener
java.lang.ClassNotFoundException: listeners.ContextListener
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1340)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3753)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4321)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:683)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:964)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:476)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2298)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:284)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:422)
2004-07-05 16:39:41 StandardContext[InterMenu]Error configuring application listener of class listeners.SessionListener
java.lang.ClassNotFoundException: listeners.SessionListener
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1340)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3753)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4321)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:683)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:964)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:476)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2298)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:284)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:422)
2004-07-05 16:42:45 StandardContext[jsp-examples]SessionListener: sessionCreated('DB609499144F90179F129F32E4D3B45C')
2004-07-05 16:42:53 StandardContext[jsp-examples]SessionListener: attributeAdded('DB609499144F90179F129F32E4D3B45C', 'numguess', 'num.NumberGuessBean@d5c0f9')
2004-07-05 16:57:13 StandardContext[servlets-examples]SessionListener: contextDestroyed()
2004-07-05 16:57:13 StandardContext[servlets-examples]ContextListener: contextDestroyed()
2004-07-05 16:57:13 StandardContext[jsp-examples]SessionListener: attributeRemoved('DB609499144F90179F129F32E4D3B45C', 'numguess', 'num.NumberGuessBean@d5c0f9')
2004-07-05 16:57:13 StandardContext[jsp-examples]SessionListener: contextDestroyed()
2004-07-05 16:57:13 StandardContext[jsp-examples]ContextListener: contextDestroyed()
2004-07-05 16:58:06 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
2004-07-05 16:58:07 StandardContext[jsp-examples]ContextListener: contextInitialized()
2004-07-05 16:58:07 StandardContext[jsp-examples]SessionListener: contextInitialized()
2004-07-05 16:58:07 StandardContext[servlets-examples]ContextListener: contextInitialized()
2004-07-05 16:58:07 StandardContext[servlets-examples]SessionListener: contextInitialized()
2004-07-05 17:04:08 StandardContext[servlets-examples]SessionListener: contextDestroyed()
2004-07-05 17:04:08 StandardContext[servlets-examples]ContextListener: contextDestroyed()
2004-07-05 17:04:08 StandardContext[jsp-examples]SessionListener: contextDestroyed()
2004-07-05 17:04:08 StandardContext[jsp-examples]ContextListener: contextDestroyed()
2004-07-05 17:04:18 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
2004-07-05 17:04:18 StandardContext[jsp-examples]ContextListener: contextInitialized()
2004-07-05 17:04:18 StandardContext[jsp-examples]SessionListener: contextInitialized()
2004-07-05 17:04:18 StandardContext[servlets-examples]ContextListener: contextInitialized()
2004-07-05 17:04:18 StandardContext[servlets-examples]SessionListener: contextInitialized()
2004-07-05 17:13:19 StandardContext[jsp-examples]SessionListener: sessionDestroyed('DB609499144F90179F129F32E4D3B45C')

Similar Messages

Cannot delete SharePoint web application again

While deleting web application
Central admin gives error:
Sorry, something went wrong
An object in the SharePoint administrative framework, "SPWebApplication Name=ShareAppsUAT", could not be deleted because other objects depend on it. Update all of these dependants to point
to null or different objects and retry this operation. The dependant objects are as follows: correlation id
ULS log shows following error
Unknown SQL Exception 547 occurred. Additional error information from SQL Server is included below. The
DELETE statement conflicted with the REFERENCE constraint "FK_SiteMap_Application". The conflict occurred in database "SharePoint2013UATEnterprise_Config", table "dbo.SiteMap", column 'ApplicationId'. Table 'LastUpdate'.
Scan count 0, logical reads 2, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. The statement has been terminated.
I had similar thread https://social.technet.microsoft.com/Forums/sharepoint/en-US/74e06180-f066-47e0-8895-3e909206b9e9/cannot-delete-sharepoint-web-application?forum=sharepointgeneral
The only difference is error in central admin. Before for another web application i got
Object not set to a reference of an object. now i am getting An object in the SharePoint administrative framework, "SPWebApplication Name=ShareAppsUAT", could not be deleted because other objects depend on it. Update all of these
dependants to point to null or different objects and retry this operation. The dependant objects are as follows: in both powershell and central admin.
Solution in above thread gives following error for this case
Exception calling "Delete" with "0" argument(s): "An object in the SharePoint administrative framework, could not be deleted because other objects depend on it. Update all of these dependa nts to point to null or different objects
and retry this operation. The depend ant objects are as follows: Web Application name.
How to solve it? It is like a loop. If i go to delte web appliction it says content database is dependent object and if i do for content database it says web application is dependent object
Adit

Hi Adit,
From your description, the issue might be caused by orphan items in sitemap.
Please execute command below to check IDs and site map status for all site collections and subsites in the issue content database:
stsadm -o enumallwebs -databasename <database name>
Then use the command below to delete orphan sites:
stsadm -o deletesite -force -siteid <siteid> -databaseserver <database server name> -databasename <database name>
Now run IISReset and try delete web application via:
Remove-SPWebApplication - identity http://sitename
For related information:
http://technet.microsoft.com/en-us/library/dd789634(v=office.12).aspx
http://technet.microsoft.com/en-in/library/cc288016(v=office.12).aspx
http://technet.microsoft.com/en-us/library/ff607891(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

Web Application Proxy and IIS

I setup the Web Application Proxy role on Server 2012 R2 a while back and published a few applications. Everything worked great. A few months later I deployed DirectAccess on the same server. Once again, everything worked great.
All of a sudden users started stating that they were receiving an "Internet Information Services" page while they were clicking links on the intranet. Clicking the refresh button in their browser would resolve the problem. It was puzzling. Eventually
I figured it out. It was only mobile users having the issue. They were taking their laptops home, clicking HTTP links on our SharePoint site (which were not deployed via Web Application Proxy), which was then hitting the Web Application Proxy server's
port 80 over HTTP (not HTTPS). Then the page was being cached by IE on their laptop/tablet. When they returned to the office the cached page was opening which is why hitting refresh resolved the issue.
I understand that one of the issues is the wrong link on the intranet (HTTP vs HTTPS). We'll have these corrected. But the real problem is that they were hitting IIS on our Web Application Proxy server. Why is IIS installed? It's not required by WAP
and I never installed it... Was it installed as part of DirectAccess? And most importantly, will I break anything by forwarding HTTP to HTTPS within IIS using URL rewrite? Will it affect DirectAccess? Our NLS is not on the DA server.
Once again, this server is only used for WAP and DA. Nothing else. Any input is greatly appreciated. Thanks!

Hi Cormang,
Yes, IIS is a part of DirectAccess.
Windows Server 2012 combines the DirectAccess feature and the RRAS role service into a new unified server role. This new Remote Access server role allows for centralized administration, configuration, and monitoring of both DirectAccess and VPN-based remote
access services.
When we try to remove the IIS, we will get the message below,
I have tried to disable the IIS server on my DirectAccess server. DirectAccess client still works properly. Therefore, it seems that the IIS is not necessary to DirectAccess.
Best Regards.
Steven Lee
TechNet Community Support

Web Application working correctly only with Everyone user added to user privilages

Hello,
I have an web application in Sharepoint 2013 which only works correctly with the Everyone (Read Only) user added to User Privileges in Central Admin.
If I remove Everyone user from user privileges, user domains, that are added to access groups in Site Permissions, are directed to Request Access page of the site. I cannot understand how is this happening, specially because I have other Web App on the same
server which are working correctly.
Could you please advice me how could I trace the problem and resolve it.
Thank you!

Hi Bogdan,
According to your description, my understanding is that Everyone user cannot access the web application except adding the account to user policy of the web application in Central Administration.
I recommend to check if the Super Reader account has been given the Full Read permission on the web application in Central Administration.
If not, add the account to the User Policy of the web application and grant Full Read permission to the account.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How can I rename the "name" on "Web Application List " page

I have a quesiton need your kindly help . I'm novice in this field
on "Central Administration" website
"Administration management"--->"Sharepoint Web Application Management"--->"Web application list"
here will show all of web application mapping information
Name                                             URL
SharePoint - 24824                          http://home:8081/
SharePoint - 80                               http://home/
SharePoint Central Administration v3   http://home:8080/
I want to change "SharePoint - 24824" as "SharedServicePortal", how can do it

Unfortunately by central admin UI you cannot change a web application name.
So there are two ways to do this
First as suggested above you have to delete web app and recreate again.
2nd one you can use powershell script to modify webapp name as below
$a=Get-SPWebApplication | where {$_.Name -match "Old web app name"}
$a.Name
$a.Name="New web app name"
$a.Update()
Get-SPWebApplication | where {$_.Name -match "New web app name"}
Hope that's helps you.
Regards
Soni K

Dashcode Web Application list items

In the code generated by Dashcode, it says "Sample data for the content of the list. Your application may also fetch this data remotely via XMLHttpRequest." I'd like to keep my lists in external files so the user doesn't have to load data they may not be interested in. I've put the XHR in the listControler function, but obviously I'm missing something. Has anyone seen an example of how this can be accomplished?

Unfortunately by central admin UI you cannot change a web application name.
So there are two ways to do this
First as suggested above you have to delete web app and recreate again.
2nd one you can use powershell script to modify webapp name as below
$a=Get-SPWebApplication | where {$_.Name -match "Old web app name"}
$a.Name
$a.Name="New web app name"
$a.Update()
Get-SPWebApplication | where {$_.Name -match "New web app name"}
Hope that's helps you.
Regards
Soni K

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

IIS 7.5 URL Rewrite: Hit specific page of a web application but should be redirected to another application's page

I have deployed 2 different web application on IIS 7.5 running on Windows Server 2008 R2 but on different port numbers i.e. one application deployed on port no. 1776 and another on 8091. I want to rewrite URL in such a way that if i hit any page of first
application such as default.aspx then it will be redirected to particular page of another application along with some changes in url.
Example: if i access any page from first application like:
http://g2wv126rbsc:1776/sites/main/commercial/commercial-solutions/financing/default1.aspx
then it should redirect to specific page of another application along with some changes in url:
http://g2wv126rbsc:8091/main/commercial/commercial-solutions/financing/default2.aspx
Note: In above mentioned url, also removed "sites".
I tried to create a inbound rule through URL Rewrite module (installed on IIS 7.5) by selecting Action as "Rewrite" but didn't find any success.
I need some examples if anyone has come across same kind of issue.
Thanks in advance.

Please post ASP.NET questions in the ASP.NET forums (http://forums.asp.net ).

Integration of a web application running on tomcat

Hi all experts,
I want to integrate a web application running Apache Tomcat/5.5.20.
it's login page(jsp page) have two input box uid and pwd.Login Application
calls a servlet in Apache Tomcat/5.5.20 web.xml.
For Accessing the loging page url is http://2.2.3.2:8080/uportal/Login
I tried with app integrator
URL Template <System.protocol>://<System.server>:<System.port><System.uri>?<Authentication>
URL Template fragment for User Mapping is
login=<MappedUser>&passwd=<MappedPassword>
But its giving error
description The server encountered an internal error () that prevented it from fulfilling this request.
java.lang.NullPointerException
     ubq.base.UEncryptionService.encrypt(UEncryptionService.java:29)
     ubq.base.UUserManager.loginUser(UUserManager.java:25)
     ubq.base.ULoginServlet.doPost(ULoginServlet.java:106)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Can any body help me ,My problem is that i cant change any code in backend application.
Thanks in advance.
Regd,
Sanjay

Hi Sanjay,
Does the Tomcat is in the local System?
If it is in local system try to run the application using
<serverhost>://localhost:8080/......
else for remote server
Its always safe to add an entry (alias name) in drivers/hosts file with the ip address of the server like
2.2.3.2     myLocalServer
Now try to run and see.
Thanks,
Swathi
PS:points are welcome:-)

Problem with Configuring Tomcat for running jsp web applications..Plz HELP

I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>


<Service name="Catalina">


<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

     



<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />






<Engine name="Catalina" defaultHost="localhost">




<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>







<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">









<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>


<Service name="Catalina">


<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

     



<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />






<Engine name="Catalina" defaultHost="localhost">




<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>







<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">









<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

SSIS is not running in 64 bit production server - Error Class cannot be found while running from c# web application

Full error message:
An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
application
I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
.xls - 32 bit
.xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
Excel connection string is Ace database engine only. everything works fine.
microsoftcom/en-us/download/details.aspx?id=13255
Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
or is it because of any other problem. i have checked below links, still problem not resolved.
social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server

1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
Arthur
MyBlog
Twitter

Deploying Web application in Tomcat

Hi,
I am trying to deploy a web application "Simulator" in Tomcat. I am getting an error HTTP Status 404.
1> Here is my web.xml file........
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>IOServlet</servlet-name>
<servlet-class>com.iflex.fcc.xmlgateway.IOServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>com.iflex.fcc.xmlgateway.IOServlet</servlet-name>
<url-pattern>/servlet/com.iflex.fcc.xmlgateway.IOServlet</url-pattern>
</servlet-mapping>
</web-app>
2> The folder structure which I created is............
D:\tomcat\tomcat-jwsdp-1.4\webapps\Simulator\WEB-INF\classes\
(followed by my package structure) com\iflex\fcc\xmlgateway\IOServlet
3> The Url which I use to access this servlet is,
http://localhost:8888/Simulator/servlet/com.iflex.fcc.xmlgateway.IOservlet
Pls. Help me.

Change this line in ur web.xml
<servlet-name>com.iflex.fcc.xmlgateway.IOServlet</servlet-name>
to
<servlet-name>IOServlet</servlet-name>
By the way, kya iflex recruit kar rahi hai ??
-L.

Laserjet Color MFP M276nw Cannot connect to Web Services, tried every suggestion on forum

I've tried every suggestion possible on the forum. I opened up all ports suggested by HP support on my Belkin wireless N600 router. Changed DMZ to IP address on printer. We even directly wired ethernet to printer, still cannot connect to Web Services. Now I have to wait till April 4 for a engineer to call me back. Everything else is working fine. I can print wirelessly from my laptop & smartphone. Just cannot access Web Services, oh & firmware is up to date on printer & router. We changed DNS settings to 8.8.8.8 & 8.8.4.4.
This question was solved.
View Solution.

It sounds like you have done everything to connect the web services. Web services will not connect if you are on a guest network but if you are connected via ethernet it should be on the right band. What is the printer's IP address? Sometimes it can be too high. Is this for a company that has a proxy on the network? How far away is the printer from the router? Are there any metal shelves, wireless devices or anything else near the printer or between the printer and the router? Check that the router is on Channel 11.
--Printer Does Not Connect To Web Services--
Have you heard back from the engineer? I am anxious to know how it went. I am happy to help if they don't, otherwise keep me posted on what happens. I possibly have one more step for you.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Tomcat 5.025 : i cannot hit my web application

Similar Messages

Maybe you are looking for