Tomcat dead after install of SP 1

Hello,
I installed webaccess on my server (SLES 11 SP3).
During the install script I noticed some trouble with tomcat and right,
after install tomcat reports "dead"
rcnovell-tomcat6 start brings the message
"lock file found but no process running for pid xxx, continuing .... done"
But a status afterwards states "dead" again.
I found this thread [1].
Following the discussion I checked catalina.out and there is no entry
with "Deploying Groupwise webaccess version 14.0.1"
This thread ends how so often in open state :-((
On same machine is out calendar publishing host, may be, it´s also affected.
Where can I search?
Gotthard
[1]
https://forums.novell.com/showthread...-to-Web-Access
Gotthard Anger
Anwenderbetreuung Netzwerkadministration
Landeskirchenamt der EKM
[email protected]
http://forums.novell.com/member.php?u=35038

Originally Posted by gotthardanger
Am 31.08.2014 18:58, schrieb Gotthard Anger:
> Hello,
>
> I installed webaccess on my server (SLES 11 SP3).
EDIT:
a) I updated webaccess from 14.0.0 to 14.0.1
b) system is OES 11 SP2
Go
Gotthard Anger
Anwenderbetreuung Netzwerkadministration
Landeskirchenamt der EKM
[email protected]
http://forums.novell.com/member.php?u=35038
Did you see this TID: http://www.novell.com/support/kb/doc.php?id=7015536
Thomas

Similar Messages

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

MY E5 DEAD AFTER INSTALLING 2 ANTIVIRUS APPS

My e5 went blank after installing netqin app while kaspersky mobile security was still installed. What's the solution. Please help

@Drogzf
Presumably you have already tried removing battery for 10 minutes and replacing?
As three button depressed power on "hard reset" combination has to date never been confirmed for E5, there is little alternative but to visit a Nokia Care Point unfortunately.
Happy to have helped forum with a Support Ratio = 42.5

Zenserver process dead after installing June 2011 PRU

ZCM 10.3.1 on SLES
We were trying to image a new model of computer, Lenovo M91p, and having problems getting PreBoot service to launch. Thought perhaps the latest PRU would fix it. So downloaded and deployed the June 2011 PRU, and rebooted the server. Server sent this message via email.
"Error: [6/2/11 2:26:29 PM] Loader.SettingsRefreshModule SettingsModule.SettingsUnknownError An internal error occurred while trying to refresh the system settings."
At console the zenserver process status is "dead". I issued a zenserver restart but still "dead".
What happened and how can I fix it?
I installed this box a year ago just to test out Zenworks Configuration Management and this is the first problem we've had.

Rbaker,
the PRU is only for inventory, it contains updated definitions for
software and hardware, it's not going to help with imaging, and should
not have caused this problem. A reboot is not required after deploying
the PRU, so I suggest that the problem was already present, just
waiting to happen when the server was restarted. Can I suggest that you
post this in the server-install forum, where you'll stand a better
chance of getting the help you need?
Shaun Pond

Zen XTRA is completely dead after installing the latest firmware 2.10

Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

IMac 17" Hard Drive and DVD dead after install.

I am attempting to install a WD 250gig hard drive into a 17” flat panel 800mhz imac. I followed the directions of taking the base apart and installing the new drive with great care. The Original 80 gig drive was set to master and the DVD drive was set to slave. I set the new WD drive to master and put the base back together. All I got was a flashing question mark. That was not unexpected, but I have been unable to get the iMac to recognize the existence of a hard drive or the DVD superdrive. I started the iMac from my Powerbook in firewire target mode. And verified that the iMac does not see the drives within the system information or the Disk Utility.
I have tried resetting PRAM, changing the jumpers on both drives, making the DVD master and the HD slave, setting the HD on cable select. Formatting the HD in my Powermac and cloning the original HD to it with CCC and replaced the ribbon cable. I now can take this iMac apart and put it back together faster then a Chinese factory worker.
I have abandon hopes of a new hard drive and put the 80 gig back in exactly as I found it. The iMac will not recognize the original configuration either. I started this project as favor for my sister who owns the iMac. There is not a lot of money here to send the whole works into service.
Does anyone have any ideas on what went wrong?
Is there a way I can test the power supply to the drives?
imac 17" FP 800 mhz Mac OS X (10.4.7)

Well we figured it out. DO NOT TRY THIS AT HOME. Since nothing we did worked, I figured we had nothing to lose. With the assistance of my electronics wiz brother, we powered up the iMac while having the base opened and the components spread out on a table. Using a voltmeter, we determined we were only getting 3.6 volts to the drives. It should have been 12 volts. Somehow, something went wrong with the system board. After careful examination under a magnifying glass and some prodding with a voltmeter, we discovered that a tiny component next to the power connector on the system board fell off. It was no more than 2mm across and was marked (L13). We figured this was an inductance component and probably a filtering device for the power to the drives. We powered up the board and jumped the leads with a screwdriver. The HD and DVD fired right up. A careful soldering across L13 made the fix permanent. I got it all put back together and everything is running great.
The moral of the story; be extremely careful when pulling connectors off the system board. I must have knocked the component off when I first took the iMac apart. I just got lucky we found out what it was and were able to find a quick fix.
This a nice little iMac, but i never want to work on one again.

Macbook dead after installing new ram (1gb in each slot)

After upgrading my MB ram to 2gb (1gb each slot) my MB would not start, no lights or action. I replaced the old ram and still nothing. I then went to a genius bar and they tested it out and even replaced the ram with ones they had and still nothing. I was then told that the logic board was dead. Has anyone had this problem? Since it is out of warranty I have to pay $280 to have them repair it which is a flat fee and they will fix it no matter what is wrong which I find is better then some rates I have seen posted online for $600 just for the logic board itself.
My MB is the 1.83, could 2gb be too much? I have had the MB since July 2006 and recently had battery problems before I replaced the ram. Could this have fried the logic board?
having a mac nightmare right now!

Improperly seated RAM is fairly common... but I haven't seen many comments about inserting RAM actually damaging the logic board... but you do have to use quite a bit of force to get them in there. The good thing is the price that they are charging you for the repair... as you mentioned, I've never seen them charge that little for replacing a logic board. I wonder if that is something new.

Computer dead after installing 5900xt hours later

I installed a video card in my system yesterday it ran good for about eight hours and then the computer went dead only thing I'm getting is power light flashing in a sequence of flashes and my monitor comes on and says check signal cables.
I updated my bios a couple days prior to installing the card
Mobo: MSI 865PE/G neo2
CPU: 2.8EGHZ prescott
350 W powersupply
512mb 333 mhz 2700 ram mem
MSI 5900 XT video card

Quote
Originally posted by haremscarem
I'm thinking my power supply might dead killed by the video card.
Dual +12V rail PSU needed.
Antec Enermax or HIPER and 450W and above
Del

Ibook G3 700mhz dual drive dead after installing 10.3 please help!

hello
this is my first apple mac and i bought a ibook g3 powerbook which is:
700mhz processor 512k level 2
128mb SDRAM + 256mb stick
20GB ultra ATA hard drive
combo drive
400mpbs firewire port
video VGA
i updated it to 10.2.4 from 10.1 and it worked absolutely great :O)
i then got a 10.3.4 disk this is when problems happened to 'narna' (my G3) i loaded disk first time i did an upgrade install and i did custom install (i didnt want printer drivers and languauges on so disabled them) about 10 mins later came up with error while installing so i quit install, restarted 'narna' and reset cd off again to upgrade....
the second time i forgot to deselect printer drivers and while installing them 'narna' froze. so i had to put power plug out to get it to restart up.
i switched back on and got a grey language screen telling me to press power button to restart. thats all i get...
i've tried option button with disk so i can select the drive from which to start it up and my drive is there with 10.3 on it with a red cross on the box. if i selct that drive to boot 'narna' up from it restarts computer and then while it loads i get the grey apple screen and then it freezes again but this time i get lots of grey/white lines across the screen...
i think thats all the information...what i'm after is there any way i can solve this etc without completely wiping my computer :O( i have the original 10.1 disks but i tried those i can get on and open OS9 on the computer and it shows my other OSX drive with 10.3 wrote next to it... but the restore disks dont seen to do anything with my computer as it just gives my same messages to restart/boot or takes me to drive then it crashes...
please please please help! i've never had an apple mac before so not sure what to do to help it....

Hi giantbutton,
A good first step after any significant crash on a mac, especially if it occurs during an installation of software etc, is to start up from your OS CD or DVD (just like you would if your were trying to install software) but to then run "DiskUtility" instead of the installer. You can access DiskUtility from the "Installer" menu on the menubar when booted from the Panther DVD.
Once Disk Utility is running select your Hard drive in the panel on the left of Disk Utility window and click on "repair disk". Disk Utility will test the drive and repair problems with its directory structures if it can.
Once the "repair disk" process is complete use the "repair permissions" process.
If the repair processes works then you can try a fresh installation of Panther. If not, then your best option is probably to wipe the drive and start from scratch on a "clean" disk.
It is always a good idea to use Disk Utility to "repair" the disk and permissions before installing any OS upgrade or major piece of software.
http://docs.info.apple.com/article.html?artnum=106214
http://docs.info.apple.com/article.html?artnum=162662
http://docs.info.apple.com/article.html?artnum=25735 and
http://docs.info.apple.com/article.html?artnum=107120 provide some useful information
As far as the memory requirements go, it depends a lot on what you are doing with your computer. If you are running regular "office" type software, browsing the web , etc then 384 MB should be fine for Panther, though you may not want to run too many programs simultaneously. For "heavy duty" tasks (video editing and the like) , though it would be seriously limiting.
Cheers
Rod

Iphone 3g dead after installing dual level

Hi all,
this is really anoying.
I installed ( or tried to) the application "dual level" from appstore.
Then my IPHONE suddenly rebootet but it did not come up again.
The screen shows the apple logo in the middle but nothing happes .
I pressed the home button and the "standby button" on top to force a reboot - but still the same:
After it went down, the apple logo shows up but nothing happes further
Any suggestions ? I need my phone urgendly
tia

First do not connect THROUGH a usb hub. Make a direct connection into one of your computers usb2.0 ports. Now try holding the wake/sleep button or standby button as one of you called it, and the home button until the iTunes logo and the usb connetor cable apear on the screen. This will put the phone in recovery mode. Itunes should then recognize it.
If that one doesn't work. Try getting to power off. Then with it plugged in still directly! Hold the wake/sleep button for five seconds. While still holding the wake/sleep button hold the home button for five seconds. Then realease the wake/sleep button and remain holding the home button. Itunes should recognize it in DFU mode.
Restart your computer before you try those though, just to be sure your computer isn't acting stupid. They like to do that at times. Mostly when you are really not in the mood for it!

Ipod dead after installing new software

Hi,
I downloaded updated software for my husband's 3g nano (last year's birthday present), so that I could install the Nike sport software (this year's birthday present!). The ipod software downloaded and installed fine, I didn't do the Nike one.
The next time he tried to turn on the ipod, there was no response at all.
The 'lock button' is not on.
Plugging it into a PC with a USB cable that works with my own ipod (same model)has no effect.
It appears to be completely dead.
It is only a couple of weeks out of warranty, bought 21/09/2007, fired up 29/09/2007 or later.
We have 5 ipods in the family at the last count, and mine is my third since the first one came out. We are definitely loyal customers, so I would hope that Apple might see it's way to stretching the warranty a fraction and sorting this out for us.
To whom can I appeal for help?
Regards
Angie

Wow. Thanks Mitch. When I saw the direction you were going, I thought that couldn't be the problem. But, I decided to remap the ipod anyway, and that was the problem. Thanks again

T400 Dead After Installing 7,200 RPM Hard Drive - Twice! (2764-CTO)

Does T400 have issues/restrictions with non-oem hard drives? My T400 came with a Seagate 5,400 RPM 160GB, after I swapped it with a Hitachi 7,200 RPM 100GB drive, it doesn't boot any more -- only the power indicator is on, and the hard dirve spins, and that's it, no display, no POST, no error beeps, no nothing. I called the service and had my motherboard replaced; at first I used the 5,400 RPM 160GB drive, everything's fine; until I put the 7,200 RPM 100GB drive in -- it died again! The 7,200 RPM drive is totally working as an external hard drive, and also working fine as a system drive in T60p. I called the tech support and they suggested me to send the unit in so they can really figure out the problems, I declined because I have had bad experiences sending my machines out to service facility. At this point I'm seriously thinking to get my T400 replaced; but if this is a common issue that I wouldn't be able to use any 7,200 RPM hard drives other than the ones from Lenovo, then there's no point getting this one at all. Anyway, anyone got any ideas would be much appreciated.
Thanks!

You're having a different issue - your T400 boots as long as you swap the original HD back. In my case my T400 doesn't even POST after I put the original HD back in. I got the technician replaced the motherboard twice, and it finally worked out the second time. However we found another problem: surprisingly, my T400 was actually shipped without the BIOS backup battery (THANKS LENOVO), I had to call the service center again to request it; I got it the 2nd day, and my T400 is working so far so good, with the 100GB 7,200 rpm HD.
So far I haven't heard the non-oem HD compatibility issue on T400. In your case, it looks like your Seagate HD was just not recognized. Try changing the SATA AHCI setting in BIOS to compatible and see if it works that way.
Message Edited by rayray on 10-21-2008 04:16 PM

[VIA] KT4AV seemingly dead after installing new sound card!

Hi all,
I recently fitted a new sound card to my system. following this my system wouldn't start - it wouldn't even get past POST (i'm getting the 4 red LEDs on the D-Bracket for "cpu incorrectly installed or damaged"). I've takenb the card out again, and no change. i've removed and reseated the CPU, and no change. I've even changed the CPU for another that i know is working fine, and (you guessed it) no change. I've also tried resetting/clearing the CMOS (nothing).
The main thing i should stress is that my system was 100% fine before this. never locked, rebooted or crashed.
My system is:
KT4AV mobo
Athlon XP 2800+ (and also a Duron 900 for testing, as above)
2 x Crucial DDR2700 512MB sticks
Radeon 9800 Pro (Saphire)
Q-Tec (yes - i know!) 550W PSU
Could the CPU socket have been damaged/burnt out or something?
Hope someone can help, cheers
Jon...

the first thing i will suggest is.... try another (better) PSU. borrow one off a friend. you may find that the board powers up again

Tomcat seems couldn't run after installing Oracle 8.0.6

After installing Oracle 8.0.6, my Tomcat seems couldn't startup. I have set the environment variable for JDBC and Oracle driver like: Classpath = .;c:\orant\jdbc\lib\classes111.zip and path = c:\jdk1.3\bin;c:\orant\jdbc\lib\classes111.zip. However, before installing Oracle, Tomcat was running smoothly. Is installing Oracle make mess between Tomcat and Oracle? Or, is the environment variables are set incorrectly? Please help me to solve the problem. and how to make database connection to Oracle using JSP(Tomcat). Your advice is much appreciated, thanks in advance.

Add a reference to the oracle driver zip file (classes12.zip) to the classpath in the batch file that runs tomcat (i.e. tomcat.bat).
Then, the architectural decision is all yours. You can define a database access layer...
I'd look in to the model 2 architecture if you want to learn how to do this. There are loads of references, none of which I have to hand, but try searching the JDC, there's bound to be plenty.
On the other hand, if you want a quick and dirty solution, then model 1 is the way to go.
Cheers,
KJ

Can't start Tomcat after installing Bea WorkShop for JSP

Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.

I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron

Tomcat dead after install of SP 1

Similar Messages

Maybe you are looking for