Tomcat does not work when using only netcfg to start network

hello!
for myself i wrote a script to connect automatically to a wireless network using netcfg. i do not start my network via the daemon (/etc/rc.d/network).
i have a project and so i want to use tomcat. but it does not work correct, i can start it, but i can't connect via "localhost:8080". when i start my network using the network daemon it works! apache runs fine, but i need tomcat!
can someone help me please?
thx, marv

where is "lo" enabled in the network script? i did not found it and/or i have no idea which function enables it.
can you help me please? can i just copy the lines of code to my own script and it will enable lo?
mfg iggy

Similar Messages

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS

Hi,
I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task. This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
We saw it log error in System Event log
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
and APPID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
permission can be modified using the Component Services administrative tool.
I am pasting below code for reference.
m.InvokeMethod(observer, "Startservice", null, null);
//wait until invoke method is complete or 30 sec timeout
int intCount = 0;
while
(!completionHandlerObj.IsComplete)
if (intCount > 60)
MessageBox.Show("Inside 30 seconds");
break;
//wait 1 sec.
System.Threading.Thread.Sleep(1000);
//increment counter
intCount++;
//see if call was successful.
if (HandlerObj.ReturnObject.
Properties["returnValue"].Value.ToString() == "0")
isStarted = true;
Dhanaji

For web apps the context will be the context of the app pool. Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine. If you have
enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax. This wouldn't work if you need to impersonate a user though.
Michael Taylor
http://blogs.msmvps.com/p3net

Own voice app does not work when using Maps-N8

I've recorded my own voice and uploaded it in Nokia Maps. Own Voice is found in the list of available languages but still after choosing it, all I get is a female chinese voice. I want to hear my own beautiful voice but how??

Have you tried deleting the voice catalogue file from the Maps folder?
Go to the File manager and browse your memory card to cities\diskcache\voices -folder, and delete voice_catalog file.
After that turn Maps application "Online" and check the voice catalogue again from Settings > Navigation.
Happy to have helped forum with a Support Ratio = 42.5

My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Youtube does not work when i am using wifi on iphone 4

the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Css3 animation does not work when triggerd by backing bean method

Hi,
I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
The problem is that the animation does not work when I set the styleclass in a backing bean.
In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
Here the backing bean code:
    public void doRotate() {
       afCalender.setStyleClass("rotateOut");
       AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
    }Here the skin:
.rotateOut {
    -moz-transition-property: -moz-transform;
    -moz-transition-delay: 2s;
    -moz-transform: rotateY(45deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
.rotateReturn {
    -moz-transition-property: -moz-transform;
    -moz-transform: rotateY(0deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
}In Duncan's article java script is used to change the style class.
Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
Any hints?
regards
Peter

I have tested several other settings but no success.
Any ideas?
regards
Peter

In google chrome my keyboard does not work, but seemingly only on a particular website....any suggestions?

my keyboard does not work, but seemingly only on a particular website while using Chrome....any suggestions?
Using a MacBook OSX 10.9.2

does it work in other browsers? Also, what website? When did this start happening?

Tomcat does not work when using only netcfg to start network

Similar Messages

Maybe you are looking for