TOMCAT SERVER CONNECTED TO LOAD BALANCER
Hi ,
scenario:
Tomcat server addedd to the load balancer for performance .
Q&A:
We have added tomcat(new server) to load balancer,now all the services are up and running,but i want to know the validation of how the new server added to the cluster will have the connections via load balancer to this server. is there any simple way where by we can go by looking at some logs, or load, or connection statistics for the Tomcat server whilst users connect.
please gurus can you help,
1.HOW TO VALIDATE THE LB IS WORKING FINE .
2.TOMCAT SERVICES VIA LB (CONNECTION)
3.OTHER VALIDATION TO BE CONSIDERED.
Regards,
SAP Business Objects really cannot verify if your load balancer is working fine, you should take that up with your load balancer manufacturer or IT folks that manage it.
When using a load balancer with business objects deployment on tomcat you should enable session persistance (this is mandatory in XIR2) and may be needed in some circumstances in XI 3.x.
A little trick I've seen customers do is to change an image file in the deployment to have a #1 or 2 or 3 or... depending on the tomcat server, this way they could tell which server the load balancer was redirecting to. To do this right click the image when accessing tomcat (to get it's location in the deployment) and simply edit with MS paint or favorite image editor (back up the original 1st just in case...)
Regards,
Tim
Similar Messages
-
Weblogic DB connection pool load balancing problem
hi all,
here is a strange issue. We have a clustered weblogic environment with2 servers. And the application is deployed to cluster. But strangely when we check the active connections for the connection pool that is being used by the application, we see that 2nd server has more connections when compared to 1st server, lets say 1st server has 4 active connections, 2nd server has 50 connections, What might be the problem.
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/jdbc-data-source" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/jdbc-data-source http://www.bea.com/ns/weblogic/jdbc-data-source/1.0/jdbc-data-source.xsd">
<name>##########</name>
<jdbc-driver-params>
<url>jdbc:oracle:thin:@hostname:portnumber:Schema</url>
<driver-name>oracle.jdbc.OracleDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>#####</value>
</property>
<property>
<name>portNumber</name>
<value>#####</value>
</property>
<property>
<name>SID</name>
<value>######</value>
</property>
<property>
<name>serverName</name>
<value>hostname</value>
</property>
</properties>
<password-encrypted>##########</password-encrypted>
<use-xa-data-source-interface>false</use-xa-data-source-interface>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>0</initial-capacity>
<max-capacity>75</max-capacity>
<capacity-increment>5</capacity-increment>
<shrink-frequency-seconds>900</shrink-frequency-seconds>
<highest-num-waiters>2147483647</highest-num-waiters>
<connection-creation-retry-frequency-seconds>0</connection-creation-retry-frequency-seconds>
<connection-reserve-timeout-seconds>10</connection-reserve-timeout-seconds>
<test-frequency-seconds>60</test-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<profile-harvest-frequency-seconds>300</profile-harvest-frequency-seconds>
<ignore-in-use-connections-enabled>true</ignore-in-use-connections-enabled>
<inactive-connection-timeout-seconds>0</inactive-connection-timeout-seconds>
<test-table-name>SQL SELECT 1 FROM DUAL</test-table-name>
<login-delay-seconds>0</login-delay-seconds>
<statement-cache-size>10</statement-cache-size>
<statement-cache-type>LRU</statement-cache-type>
<remove-infected-connections>true</remove-infected-connections>
<seconds-to-trust-an-idle-pool-connection>10</seconds-to-trust-an-idle-pool-connection>
<statement-timeout>-1</statement-timeout>
<profile-type>0</profile-type>
<pinned-to-thread>false</pinned-to-thread>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>##########</jndi-name>
</jdbc-data-source-params>
</jdbc-data-source>are you using any front end web server or hardware load balancer ? verify your load balancing if it's happening or not properly between your clustered managed servers.
Regards
Mukesh Negi
http://weblogicserveradministration.blogspot.com/ -
Checking number of connection in load balancer
Hi,
could you help me find how many connection connected to load balancer in avg and peak connection on daily basis.
any script or tool to help us find out how many connection hitting to live real servers and VIP,Hello,
You can utilize ACE Device Manger which is a built-in GUI tool to monitor system statistics. It is bundled in any license.
It is pretty easy to start. You need only basic configurations to access management address via https, and
snmp community for monitoring.
# Monitoring a rserver
You can change time range to view the graph. Options are 1h, 2h, 4h, 8, 24h, or All Date.
On the ACE, statistics are kept for 7 days or 20,000 hourly records, whichever comes first.
# Monitoring L7 connection
I think grapsh for L7 connections are aggregate statistics of all L7 policies.
Row data view.You can download the data in Excel format.
You can find more detail about the Device Manager in the Configuration Guide.
Some sample shots of DM view are also on the configuration guide.
Cisco 4700 Series Application Control Engine Appliance Device Manager GUI Configuration Guide
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_2_5/configuration/device_manager/guide/New_Book.html
Monitoring Your Network
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_2_5/configuration/device_manager/guide/UGmntr.html#wp998451
Thanks and regards,
Kimihito. -
Configuring RFC connections for load balancing.
Hi ,
We have the following landscape for our systems.
The database is installed on z/os , db2 (mainframe). The central services( SCS and ASCS) are also on the mainframe. So the message server is on mainframe.
The CI is on AIX and The DI is on AIX.
We have Logon groups configured and load balancing Configured and is RFC enabled.
1) When we connect to SAP using the SAPGUI and the portal connection is made to either CI or DI depending upon the best response times. Now recently we are running the mercury load testing, all the users are connecting to DI. Why are the users connecting to DI even though we have load balancing?
2) I have a system with SID BP0, with one CI and one DI. The logon group is BP0 and the message server name is cyrix. Now I have other another system EP0. I have created a RFC connection from EP0 to BP0. In SM59 I have selected the load balancing option, and provide the message server name, SID and logon group name. The connection does not work. If I connect directly to the CI or DI the connection works. Please tell me how can I configure load balancing for RFC connections.
Thanks
Manmath.Dear 917996,
There are two types of load balancing:
- Client-side load balancing (setting up the tnsnames.ora on client side). More information here (http://ggsig.blogspot.co.uk/2012/04/client-side-
load-balancing-in-oracle.html). Very good video produced my friend Igor Melnikov is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/client/clientloadbalance_viewlet_swf.html)
-Server-side load balancing (remote_listener and setting service parameter clb_goal). Very good Igor Melnikov's video is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html).
I have read about client side and server side load balancing. By editing tnsnames.ora I have enabled client side load balancing which is suppose to select listeners at random. then why does it only go to second node?Could you please show your tnsnames.ora on client?
Please can anyone help me to configure server side load balancing with SCAN. I have read many many post but couldn't find a clear answer.Based on your output (remote_listener string cmbtrnrac-scan:1521) you have already configured the server side load balancing.
SQL> show parameter listener
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=10.1
7.67.214)(PORT=1521))))
remote_listener string cmbtrnrac-scan:1521How many SCANs do you use? Do you use DNS?
regards,
Gennady -
SmartView connections using load balancing
Is there a way to create a connection in SmartView to the Planning application that uses the load balancing functionality? When we log into the Planning web application we have a connection that provides load balancing between the 2 Planning servers. It appears that the only connection you can provide in SV for Planning is a direct connection to a web server like this: http(s)://<servername>:8300/HyperionPlanning/SmartView.
I did a second look at my configuration and it actually looks like Workspace is the only Smartview connection that I have load balanced. For Planning, once connected to the Hyperion Provider Service URL the Planning applications show under the Common Provider Connections. The Planning connections point to the URL of the APS.....which is just like what you use. http://servername:8300/HyperionPlanning/SmartView
Reading through the EPM High Availability Guide, it appears that it can be done for APS but it seems that might no longer support Planning:
The following list specifies supported clustering methodologies for EPM System product and components (with sublists for components) and options for removing single points of failure from the architecture and maintaining consistent performance through load balancing.
Oracle Essbase—Clustering with Oracle Hyperion Provider Services for high availability and load balancing
Note: High availability for Essbase with Provider Services does not support write-back.
See the Oracle Hyperion Enterprise Performance Management System Manual Deployment Guide.
- Essbase Administration Services—None
- Oracle Essbase Integration Services Server—None
- Essbase services
- Oracle Essbase Studio Server—None
- Essbase services—Provider Services clustering for high availability and load-balancing (read-only)
See Chapter 3, “Clustering EPM System Products with Proprietary Application Servers.”
- Provider Services Web application—Java application server clustering for high availability and load-balancing
See the Oracle Hyperion Enterprise Performance Management System Manual Deployment
Guide.
Clustering with Provider Services
If Essbase is clustered with Provider Services and no third-party tool:
- Smart View must be used rather than an Excel add-in.
- Essbase has no write-back capability and should be used for reporting only; therefore, Oracle Hyperion Planning, Fusion Edition is not supported.
- Nodes must be loaded and calculated individually. -
At the weekend our F5 load balanced CAS array name was moved to our 3rd datacentre and all users lost access to Outlook. The databases were running on DAG2 listed below at the time.
We have 3 DAG servers configured as the following:
DAG SERVER ONE (DAG1) | Datacentre 1 | Primary AD Site | Multi role server MBX, CAS, HT
DAG SERVER TWO (DAG2) | Datacentre 2 | Primary AD Site | Multi role server MBX, CAS, HT
DAG SERVER THREE (DAG3) | Datacentre 3 | Secondary AD Site | Multi role server MBX, CAS, HT
We primarlily run from DAG1 or DAG2 - DAG3 is for real DR and loss of Datacentre 1 and 2. The CAS array "Outlook" is configured for the primary AD site load balanced across DAG1 and DAG2.
We use an F5 load balancer that balances the connections across DAG1 and DAG2, if both fail then DAG3 is used automatically. We have tested and it works fine simulating loosing DAG1 and DAG2 and bringing up as a 1 node cluster on DAG3 with a
FSW and the load balancer pointing at DAG3 for Outlook connections.
For some reason this stopped Outlook users connecting - can anyone advise me why as I have been asked to test this again and I was expecting it to work?Hi,
As far as I know, For Exchange 2010 before SP2 RU3,the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). Thus, except with Andy's suggestion,
I recommend you can also repair or recreate the Outlook profile to have a test.
For more information, you can refer to the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
Thanks,
Angela Shi
TechNet Community Support -
Multiple Session Connections, Manual Load Balance due to temp profiles
Setup:
DC: "2012 r2 St"
TS1: RD gateway, session host 1, user security group 1 "2012 r2 St"
TS2, session host for user security group 2 "2012 r2 St"
Collection 1 > session host 1 for user security group 1
Collection 2> session host 2 for user security group 2
Issues/Goal:
I would like to load balance the 2 hosts so some users log on to one server the others the other server, we originally had one collection with 2 session hosts in there running at 80/20 load balance.
This caused major issues with user profile disks logging onto a temporary profile every time they logged onto the second server, seems to be a bug in the software has many users are having this issue and it doesn’t seem to be resolved yet so we decided to
do a manual loads balance where half of the users are ts1 and the rest to ts2.
I created 2 collections with separate security groups, the problem is when I connect to “remote desktop” rdgateway.domaniname.com.au only the ts1 secuirty group users can log in, it doesn't automatically point the users at the correct server (ts2).
If I manually remote desktop to ts2 it lets me log is as a user from that security group.
I would like to the gateway to automatically point my users to the correct session server/collection based on the security group they are in. Can someone tell me what is going wrong here?
If i browse to the rdweb.xxx.xx and log in as a user from TS2 group it only shows the correct ts2 and lets me log in, its just remote desktop app that has the issue.how have you setup user profiles? user profile redirection or UPD? if you have a server outside of your TS farm acting as a file server to serve the profiles and your GPOs are setup correctly and are actually being applied correctly, you shouldn't see temp
profile issues
what you are doing now seems like a huge overhead and sort of defeats the purpose of having a connection broker when you're not taking advantage of load distribution -
Dual ISP connection unequal load balancing
Hi All,
I an issue regarding load balancing between to ISP. I have done policy based routing as stated in other cisco discussions .
I have 2 /30 as my test ISP and isp ip configured on other switch while i have my customer configs on my end. I can ping the two test ISP from my router but not with PC's in the lan until i remove "ip nat inside source route-map 20 interface GigabitEthernet0/0.20 overload" from the routers config.
.. Please help
Load-Balancing-Router#show run
Building configuration...
Current configuration : 2716 bytes
! Last configuration change at 04:09:37 UTC Tue Apr 21 2015 by anprasad
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Load-Balancing-Router
boot-start-marker
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.2
ip dhcp excluded-address 192.168.1.0 192.168.1.100
ip dhcp pool LAN
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
ip domain name fnu.ac.fj
multilink bundle-name authenticated
license udi pid CISCO1921/K9 sn FGL150925YE
username anprasad privilege 15 secret 5 $1$Oy40$h13lWAN4upzI19L6/MXjf/
username aaa privilege 15 secret 5 $1$W3JH$LMd0LUtdxJlXXJkB.NxjB0
ip ssh version 1
class-map match-all 512K-Outbound
match access-group name DR-512K-OutBound
class-map match-all 10240K-Outbound
match access-group name DR-1024K-OutBound
policy-map DR-Outbound
class 10240K-Outbound
police rate 10240000 bps burst 1920000 bytes
conform-action transmit
exceed-action drop
class 512K-Outbound
police rate 512000 bps burst 96000 bytes
conform-action transmit
exceed-action drop
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0.10
description Student-Internet
encapsulation dot1Q 10
ip address 202.0.1.1 255.255.255.252
ip nat outside
ip virtual-reassembly
interface GigabitEthernet0/0.20
description Staff-Internet
encapsulation dot1Q 20
ip address 202.0.2.1 255.255.255.252
ip nat outside
ip virtual-reassembly
shutdown
interface GigabitEthernet0/1
description LAN-Network
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/0/0
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source route-map 10 interface GigabitEthernet0/0.10 overload
ip nat inside source route-map 20 interface GigabitEthernet0/0.20 overload
ip route 0.0.0.0 0.0.0.0 202.0.1.2
ip route 0.0.0.0 0.0.0.0 202.0.2.2
ip access-list extended DR-10240K-OutBound
permit ip 192.168.1.0 0.0.0.255 any
ip access-list extended DR-512K-OutBound
permit ip 192.168.1.0 0.0.0.255 any
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
route-map 10 permit 10
match ip address 100
match interface GigabitEthernet0/0.10
route-map 20 permit 20
match ip address 100
match interface GigabitEthernet0/0.20
snmp-server community fnuro RO
control-plane
line con 0
logging synchronous
login local
line aux 0
line vty 0 4
login local
scheduler allocate 20000 1000
endHi,
I would like to ask if you are done with your configuration? Is it working?
next month we will add an addition ISP and I will try to configure it?
Hope you'll give me some ideas.
thank you -
PI connections to Load Balancer on ECC
Hi All,
I have a doubt regarding PI connections to ECC.
Where can we check how does PI connect to ECC.
What is url or host name and port it is using.
what is the protocol.
also if there is a load balancer used for ECC. How should PI connect to it.
ThanksHi Prabhu,
--> If you want to know whether the ECC system is connected your PI system or not.
-->If you want to import the interfaces like RFC and IDOC from your ECC into PI system we need to have connection from PI to ECC.
-->Its quite simple while creating the name space select the radibutton import of rfc and idoc from the sap systems permitted and maintain the required parameters and under imported objects try to import the RFC or IDOC if the connection is established with ECC from PI list of IDOCs and RFC's will be displayed.
-->other wise it throws connection to ECC is not established.
-->It does not matter whether we are sending the IDOC or receiving the IDOC from ECC.Because the connection is not dependent on these factors.
-->For connection with ECC port is not required.But in the case of Idoc scenario it is required.
Thanks -
Connecting to load balanced instance
Hi,
I'm trying to connect to a load balanced instance. It works fine from TOAD, but I'd prefer to use SQL Developer. I've tried connecting via TNS and by pointing directly at the two servers via a basic connection, but neither works.
Any suggestions?Figured it out - The DBAs had 'A' and 'B' suffixed onto the SID (since this load balanced).
-
Flash media server 4 enterprise load balancing
G'day chaps, me and my mates have purchased a copy of Flash Media Server 4 Enterprise edition for use on our web project. Since we will be transmitting to large amounts of users through this exceptional piece of software, we will be needing to run more than one server at once. Before going ahead and doing anything against the policies we have decided to post here on the support forums and inquire about being able to run multiple copies of Flash Media Server 4 Enterprise edition with one Serial KEY ( 10 x GigE dedicated servers ). If this is not possible, how can me and my chappies load balance all the traffic through one Flash Media Server 4 Enterprise edition.
Hi there bluray,
Congrats on your FMES purchase - we really hope FMS meets all your needs. Although you'll not be permitted by your license to use it for more than one server installation you should be aware that FMS 4 has new scalability functionality that should enable you to scale beyond what you're currently expecting. You may want to get immediately familiar with RTMFP and peer assisted networking. FMS has the capability to serve as your personal introducer leveraging the power of peer to peer to scale more massively than a single installation is capable of.
Here's a little snippet about it
http://www.adobe.com/devnet/flashmediaserver/articles/p2p_rtmfp_groups.html
or
http://en.wikipedia.org/wiki/Real_Time_Media_Flow_Protocol
Hope that helps.
Asa -
Oracle report server 10g with load balancer.
Hi All,
We are in very big trouble, Please help us out. Issue is
we have install oracle 10gApplication server along with Report Server stand alone, Application server and report server are working fine but when we put reports into physical load balaner its showing unable to connect report server, I try to dignose with help of some he writes me on command can you people clear me what this mean.
[oracle@rep bin]$ ./rwdiag.sh -findall
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = rep_cbs_lhr : Type = server : Host = rep.mcb.com.pk
(2) Name = rep_rep_oracleas1 : Type = server : Host = rep.mcb.com.pk
(3) Name = rep_eoc12_oracleas1 : Type = server : Host = eoc12.mcb.com.pk
(4) Name = rep_lahore : Type = server : Host = eoc1.mcb.com.pk
(5) Name = rep_as1_as1 : Type = server : Host = as1.mcb.com.pk
(6) Name = lhr_rep : Type = server : Host = eoc1.mcb.com.pk
[oracle@rep bin]$
Regardshi,
./rwdiag.sh -findall
rwdiag is a utility used to find all the Reports Servers on the network.
./rwdiag.sh -find <report server-name>
and it monitors packets broadcasted on the network by the particular Reports Server.
THis link might help you,details about rwdiag.sh
http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_rwdiag.htm
Regards
Fabian -
Task Server Problem and Load Balancing
Hello
I am trying to use ARD to adminstrate the 100 or so macs in my college.
I have a few issues.
I am running ARD as a task server on a mac mini setup as a server. To use ARD I remote onto the mac mini and use ARD from there.
If I try and send an install package using the task server on the mac mini, the task will just hang, saying that the targetted computers are idle. If I use the ARD tool on our departments MBP and run it from the task sequence on the mac mini, it will work, but it's a stupid way of doing it as ARD pulls the install files down over the network to the MBP to send them back to the mac mini. Also ARD has started crashing everytime I attempt this now anyway.
The reason I have been trying to run this from the task server rather than just from the ARD application is because of the second problem. If I send a package or group of packages to a single mac, it will send it at full speed, pretty much saturating the speed of the connection the mac is connected to, in this case about 8MB/S. If I select multiple macs the speed tanks, usually less than 1MB/S, this means sending a 4GB package to 20 macs takes 3 days, obviously not ideal.
Anyone else experienced similar problems and found a way around them?
thanksThanks for the reply
I think you might have misunderstood my post slightly, I have a mac mini set up as the task server.
If I run ARD from my MBP and tell it to run tasks from the task server, the tasks will run.
If I go onto the mac mini and tell ARD to run tasks from the local task server, they just hang.
All clients are added to ARD and fully authenticated.
The server isn't limited by 8MB/s it's the network. The macs are all networked into each other with 1Gb/s switches, but that is then linked back into the comms cab on a 100Mb/s port, which then goes back to the main server cabinet on a 1Gb/s link.
The package is the general software for the macs in this room, and in total all the software is about 8gb, it includes CS6, office, iLife and a few other bits n bobs, but it doesnt matter how big the package is it always fails.
If I try and send it using the ARD application on the mac mini, it will work, but sends really slow when i select all 20 macs at once, if i send it to just one mac at once then it sends at full speed, sounds to me like ARD is not very good at multicasting!
I managed to do a work around by queing up the package and sending it to 1 mac at a time, but this seems stupid, and apart from that after it did a few of them the rest failed saying not authenticated, so I had to go back onto the list view for it to reauthenticate.
All in all ARD is just being a pain, and is not doing what it's advertised to do, i'm finding this to be a dissapointing patter with apple server products. -
ARFC: Single Server and Load Balancing
Hi All,
I am trying to create aRFC model. In SAP logon screen, I can see two tab pages - Single Server and Load Balancing.
Can you please let me know when we have to use which tab?
Thanks
TGSingle Server Connect or Load Balancing connect is completely independend from the location where SAP Gui Client is installed.
Single Server connect means that your are directly connecting to an ABAP Server using hostname and systemnumber you have to provide.
Load Balancing Connect means that you specify the message server of the central instance of an ABAP Server group. The SAPGUI first connects to the message server which will provide the SAPGUI with the information about the best performing ABAP server. SAPGUI will then connect to this ABAP server.
Single Server is suitable for small landscapes with lets say less than 4 application servers. In huger configurations (and those which I know will grow to more than 3 servers)I would prefer to use logon groups - aka Load Balancing.
Peter -
CSS Load Balancing Citrix Terminal server, is ti possible ?
Hi we have to balance a Terminal Server Citrix Server Farm with css, did anyone already realize it? Is there any problem to do it ? Someone told me there is nat problem with citrix metaframe terminal server, has anyone information about it ?
Any help will be greatly appreciated. Many thanks
MaxStickyness means that once a user is directed to a server through the load balancer, that user will remain on the server he was first load balanced to for the duration of their connection. Otherwise, every tcp connection that a user makes is load balanced to whatever servers are configured. There are severalways to configure stickyness. You can do it via:
-source IP
-source IP and destination port
-text string in a cookie or URL
-SSL session ID
take a look at this document that explains it better than I could:
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a0080772d96.html
Maybe you are looking for
-
I have encountered this problem repeatedly, not just on one or two occasions. The window that opens up and allows me to check on or off of reopening a "restore" session is completely "dead" to my mouse other than the check boxes. Couldn't it be made
-
Difference between core switch types WS-C3750X-12S-S and N3K-C3524P-10G?
Hello All, I am new to this domain and yet have to look after the setup of our datacenter for a new branch. Could any one of you provide difference between core switch types WS-C3750X-12S-S and N3K-C3524P-10G! Thanks in advance!!
-
Can someone please tell me what the settings are for to make my tv shows / movies encode in widescreen for my 42" widescreen. I keep getting big black lines left and right of the movie Thanks in advance
-
Errors with Test Web Service in Java Studio Creator...
Hi... I'm a newbie with web services. I've installed Java Studio Creator in my Win XP Pro environment and I've been following the tutorials on how to add a web service to my projects, etc... In any case, I've followed the steps to ensure that my Depl
-
Keep getting message from sites that Adobe Flash Player needs to be installed
I have a MacBook, OSX 10.7.5. When I try to download a document, I am told that I need Adobe Flash Player and that I should download it. When I look on the Adobe website, to check something, I see that the newest version of Flash Player is installed