Tomcat6 startup reports fail, but I can access the web page

I'm installing tomcat6 to try to run mythpodcaster.  I followed the wiki on installation, but when I start tomcat6 I get a report of fail.  However, I can access the tomcat page on the server.
catalina.err gives me some info messages, don't see anything there of concern
catalina.out gives me 2 warnings; No appenders could be found for logger (com.mchange.v2.log.MLog).  and Please initialize the log4j system properly.
I haven't figured out either of these warnings yet, but in any event, why do I get a fail on startup of tomcat6?

Hello,
Have you managed to fix this?
Startup scripts have changed a bit in the past tomcat6 packages. May I ask which version you are running?

Similar Messages

  • TS3408 Safari on my new iPad mini isn't working - says server stopped responding but no problem accessing the web with my old iPod touch. What's going on?

    Safari isn't working on my iPad mini - "server stopped responding" but I can access the web on my old ipodtouch. What's up??

    All other apps were working.  We fixed it by reverting to factory settings and starting over.  Thank you!

  • TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

    I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

    Does using 192.168.1.1 get you to the web page?
    Firmware Update Process
    To safely update FW, I recommend doing the following: Download the FW file from the support site first.
    Disable the auto update feature on the router.
    1. Save router config to file first using IE or FF with all security add-ons disabled.
    2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
    3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
    4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
    PC Web Browser Configurations
    What browser are you using?
    If IE 8, 9, 10 or 11, set compatibility mode and test again.
    Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
    Clear all browser caches.
    Be sure to log into the local log-in account on the router first.

  • TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • List of reports and groups who can access the reporta

    Please i need some help
    I need to get list of   bo reports and groups who can access these reports.
    I got list of groups but i need the list of reports and groups who have access to those reports.
    Is there any query which i can write in query builder to get that information.
    please help me with query

    No need for DB access. This might work for you.
    //assumes you have a session objectpublicvoidGetCommunityACLs(intcommunityId){    Console.WriteLine("Retrieving users for community "+communityId.ToString());    IPTObjectManagercommunityManager=session.GetCommunities();    IPTCommunitycommunity=(IPTCommunity) communityManager.Open(communityId, false);    IPTServerContextserverContext=(IPTServerContext) community.GetInterfaces("IPTServerContext");    //since IPTServerContext is obtained from a community,    //the IPTServerContext.GetACL() method will return a list of all objects that have acls defined on it.    IPTAccessListaclList=serverContext.GetACL();    for(inti=0; i<aclList.GetCount(); i++)    {        IPTAccessListEntryacl=aclList.GetItem(i);        stringmemberType;        if(acl.GetClassID() ==PT_CLASSIDS.PT_USER_ID)            memberType="User";        elseif(acl.GetClassID() ==PT_CLASSIDS.PT_USERGROUP_ID)            memberType="Group";        else            memberType="";        Console.WriteLine("{0}: {5,-6}{1,-3} Access Level={3,-2} r/o={4,-6} {2}", i, acl.GetObjectID(), acl.GetName(), acl.GetAccessLevel(), acl.GetReadOnly(), memberType ); }}
    Ruslan.

  • Webiste shows Temp. Unavailable on my Mac but I can access the same webiste on my iPhone

    I am trying to access a website that I have accessed many times before.  Now it shows "site temporarily unavailable" .  I am able to access this site from work as wellas from my iphone.  Not sure what changed.  Can anyone help me with this?

    Using Safari ??
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click: Remove All Website Data
    Now empty the Safari cache.
    Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit then relaunch Safari then try that website.
    If that didn't help either, since you can access the site on our iPhone, restart your router.

  • Trouble accessing the web page outside of the US

    In PAris having trouble accessing my Iweb pages, They published successfully because some friends (But not all) in the US and UK can access the site. I can not locate it in my browser nor can anyone else in France. I sent everyone the same initial publishing email. What am I doing wrong? Any help would be appreciated.
    web.me.com/rwhaven

    I can view your site in Belgium.

  • Finnickey wireless- downloading updates fail but i can still surf web!!!

    hey all,
    I'm proud to say that i just purchased a new iMac. unfortunately, the only form of internet access in my area thus far has been dial-up. however, when i booted up my iMac for the first time, it found a network called "default" that is giving a very strong signal! to my delight, safari opend right up and i was surfing the net high-speed! oddly, when i run "software update" it starts downloading the updates fine, however, if i just let it be, the "estimated time" gets larger and larger until it just says, "--remaining". ultimately the download fails and it says, "...be sure you can connec to the internet." the thing is, i DO have internet access the whole time! and if found that if i'm activel "surfing" the web, and giving it new pages to load, the downloads will continue and stay and at consistent amount of "time remaining". can anyone tell me what might be going on? it is so bizarre. also, i've been told by many companies that high-speed is not available in my area. CLEARLY it is! is there a way i can find out where the signal is coming from or any info about the network? thanx a million! sorry so long.
    David

    thanx a bunch!

  • Firefox will not connect to websites, it just says "connecting" constantly, but I can access the internet using IE.

    For the last 2 days I have had a problem with Firefox. When I start it, one or two pages will open, sometimes 3 or 4, but then if I try to open any more tabs it will just get stuck connecting to it and never go to the page. Once it starts this infinite-connection process, the pages previously opened do not work anymore either. If you try to navigate in them, they will respond the same way. I have tried connecting in IE, and it works. I did upgrade to Firefox 6 yesterday, but I was having the problem before that (which is why I tried upgrading).

    I have tried all of the options in that first link you showed and none worked. I also configured my firewall (Windows Firewall) and ensured firefox was in the "Allow" list, which it was. I still have the issue.
    I did notice something interesting though. When I first checked the firewall, Mozilla firefox wasn't on the list at all. I had to manually add it and then made sure it was allowed to connect to the internet. Even after I uninstalled and reinstalled firefox, I never got one of those windows notifications asking me if I wanted to add a rule for firefox. Checking the firewall settings again, firefox was still absent. I don't think it matters, firefox doesn't work with no rules at all in the firewall, or if I manually add the rule and allow firefox to connect.
    Any other thoughts?
    Thanks in advance for your help

  • Can Virtual PC access the web pages served by my Mac?

    Macs are really awesome for web design. Really wonderful. Sooner or later, though, you run into this one little nagging issue: 85% of the ever-lovin' public uses IE 6. So, you gotta test all your stuff on IE 6 before you release it.
    So. I've just installed XP Pro on Virtual PC 7.0.2 running on OS X 10.4.7. I've got the internet connection working by turning on virtual switch networking, which the program warned me probably wouldn't work with my wireless network (but seems to). The internet connection did not work until I turned this on.
    While doing web development, I turn on Personal Web Sharing and preview my pages by accessing them through http://localhost/. I should be able to access pages served from my Mac from other computers on my network by typing in the IP address shown in System Preferences. Indeed, this has always worked in the past, but from separate computers. My theory is that the virtual PC is a computer on the same network as its host, but when I try to access my Mac's IP from Internet Explorer, it doesn't work. Other web pages work, just not the ones served off my Mac.
    I literally have changed no settings within Windows. The only thing I've changed in VPC is the virtual switch networking thing.
    ipconfig says this:
    Windows IP Configuration
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : domain.actdsltmp
    IP Address. . . . . . . . . . . . : 192.168.1.107
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    And the TCP/IP prefpane says this:
    IP Address: 192.168.1.101
    Subnet Mask: 255.255.255.0
    Router: 192.168.1.1
    So...looks good, right? Yet it's broken. I'm at a loss. Does anyone know if this is possible at all?
    Thanks,
    -Ryan

    hi there,
    sorry I cannot answer the reason why, but I have the same problem.
    I initially made my website in iweb version 1.x and when I bought the new copy of iweb updated the site to iweb 08
    however since doing so, the minute it was uploaded, I got emails saying that my website had crashed peoples computers and it was slow, something that I had never had before
    having updated the domain to iweb08 I couldnt go back, so rebuilt the site in iweb06 - and since never had a complaint since.
    However forgetting why I decided against using iweb08 to produce my site, when I got my new mac, I recreated my website from scratch in iweb08
    within a couple of hours of uploading the new site, I can various emails saying that the site was crashing peoples computers and again the site was slow, yet I was only upgrading the site, using the same basis for the iweb08
    anyway have gone back to my iweb06 and asked the people that had the problems to try again and low and behold the website is working a dream
    Could someone shed light on why iweb08 creates so many problems for the people viewing the site.
    I viewed the site okay in mozilla firefox, but is does seem to be an issue with PC's and also IE
    I have iweb 2.0.4 currently as its a new imac, and 1.1.2 on my macbook
    the site is with 1and1

  • Itunes says I don't have an internet connection but I can access the internet.  I turned my firewall off.  How do I get onto itunes store

    I can't access my itunes store, it says I don't have an internet connection but I do.  I tried updating to the newest version of itunes, turned off my firewall, checked to make sure itunes was allowed in my internet options.  what else can i do?

    Hello bigblue8
    Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Why does "problem loading page" appear when i try to run firefox? I can access the relevent page via internet explorer but firefox cannot connect to the web/

    A few days ago Firefox stopped working when using shortcut or exe. file. The message http://en-gb.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-GB:official appears, although when i paste this address into internet explorer it works. What is preventing firefox from connecting?

    Actually, dchristie, your solution didn't help at all. If I wanted to use IE, I wouldn't have installed Firefox. IE is a good browser, but doesn't have features Firefox has. Also, when Firefox crashes windows can kill it and you can restart it no problem. When IE crashes, since it is so tightly integrated into windows, windows itself becomes unstable and you have to reboot.

  • TS1398 I have followed all of these steps but still i cannot access the internet on my ipod, what is strange is that I use to be able to, but all of a sudden itm stopped working but i can access the internet through wifi on my laptop....?

    help

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • What do you do if Creative CloudApp Mgr says it is installed but you can access the program locally?

    We just signed up for Creative Cloud for my daughter's multimedia class...some programs are working but Illustrator shows as "installed" in Adobe Application Manager but it is not installed on her mac.  Of course she needs to use it all weekend for a project due Monday.  This has been a horrific experience...not a good birthday present at all.  Any suggestions?

    Run the Creative Suite Cleaner Tool and let AAM reinstall the programs properly.
    Mylenium

  • I have safari in my iPad but bookmark is not working. I can not book mark any things.  How do I get back my bookmark working so that I can open the web page I have already booked marked.  Thank you for your answer

    I have iPad 2.
    The safari bookmark was working yesterday.  Today book mark is not working.  I can not book mark anything. 
    Did I do anything to prevent stopping bookmark to store?  Please help me how to get back working my bookmark.  Thank you.

    See if this works.
    Quit the Safari app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for