TomTom NAVIGATOR 6 installation problems on N73

TT Navigator 6 won't install on my Nokia N73.
TomTom HOME offers some Destination units.
Destination unit: 'Symbian Series 60 3rd Edition' reports 'Program not compatible with phone'.
Destination unit: 'Symbian UIQ 3rd Edition' is accepted, but the following continuing installation on disconnected phone, reports unable to complete!
Will be greatful for any support.

I've got the same problem. I am trying to install "NAVIGATOR 6 - Software & Maps of WE" onto my Nokia N73 phone.
I have connected my phone to the computer as a mass-storage-device, and this appears in TomTom-Home.
I have installed the latest version of TomTom-Home (V1.5 Build 032).
I have selected "My Device" as a "Symbian Serias 60 3rd edition", which is correct for the Nokia N73 (running the latest firmware V 3.0704.1.0.1 19-01-2007 RM-133).
When I do this, ALL of the application choices within the "Application" window of TomTom-Home are greyed out...including "TomTom application for S60" !!
Despite this, if I select "TomTom application for S60" and try to install it, I get the message "This item is not suitable for you TomTom device".
I can quite happily install maps, POI etc, but NOT the actual TomTom application.
I have contacted TomTom support, but as yet have no reply!

Similar Messages

  • TomTom Navigator 6 installation

    Does anyone know how to do a manual installation of TomTom Navigator 6 onto an SD card
    Thanks, Duncan

    Hi, and welcome to the Palm Support Community.
    I believe that TomTom Navigator must be installed to your device's internal memory...there is an involved installation routine which requires a device code and an authorization code which won't work if you are trying to install the application to a card.  At least, that's what I recall.  It is only the maps which can be installed to a SD card.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Problems with N73 firmware v 4.0726.2.0.1 update

    Hello,
    we have updated our N73 with the 4.0726.2.0.1 software update.
    Since then, what happens is that reststarting the phone the music player automatically starts, although it is not a music edition.
    Furthermore, it does not connect with our bluetooth gps device, which did work before the software update with Nokia maps perfectly.
    Can you help?
    Product code: 0529799
    Thanks a lot in advance.
    Best regards,
    Dora

    I also had the same problem when upgrading to the newest firmware:
    Firmware: V 4.0726.2.0.1 26-06-2007 RM-133 Nokia N73 (77.01)
    Type: GPS
    Vendor: Dell
    Model: BT-309
    BT version: 1.2 (I think...)
    Status: NOT working
    Tested with: TOMTOM Navigator 6.010 with gps driver 1.20
    When trying to use the Dell BT-309 GPS it keeps trying to get a signal without any success. It finds the GPS, asks for the code, tries to pair off and then loses the signal back and forth forever.
    The GPS worked fine with my Nokia 6620 so I know it's got to be something that they jinxed in the new firmware. I can now use my BT stereo headset but lost my GPS ability, which frankly costs much more than the headset and is far more useful to me

  • Is there a firmware problem with N73?

    I have a new N73 with TomTom Navigator 6 installed. First thing I did was update the firmware (V4.0726.2.0.1) but now it cannot communicate by bluetooth with the TomTom GPS receiver despite being successfully paired.
    Is this a known issue?
    Can I roll back the firmware update?

    Hi,
    and welcome to the club... :-(
    Look to the 'Connectivity'- area. There are some threads about that problem... (It is a NOKIA- problem!)
    Regards Cliff

  • N95 Geocache Navigator application update problem

    I have installed Trimble geocache Navigator SW to the N95 memory card. It is great program and has worked well many weeks. Later i updated it to the new version. All was working correctly few days. Then i noticed that i can't open the program at all. There was only icon but not any other files found or any other track related to that Nav? Of course i though that i have to update it again but reinstallation detected older version and asked to update to new one. Then i agreed that but installation stopped:" cannot install"? I didn't find any other logs or help messages for that.
    After that i updated my phone Firmware to the latest OS version. Then Navigator icon was destroyed but the same installation problem was still there?
    Then i found temporary solution. I removed memory card and installed Navigator to the phone memory. It worked without problem.
    so how i can install the program to the memory card again? Is there some register file which detects the Navigator and which filemanager program i should use for that? Any other ideas?

    Trimble support .
    http://www.geocachenavigator.com/Forums/tabid/228/Default.aspx
     If trimble did not sell you the product but it came via Ovi Store you should contact Ovi Store in regards to a refund  ..
     Another user may come along with more info  or experience with the product .
     jje

  • Installation problem on Intel

    I have tried to install Solaris 8 on my Dell machine.
    I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
    The first screen says this....
    SunOS Secondary Boot version 3.00
    WARNING: ACPI Tables not in Reclaim Memory
    prom_panic: kmem_free block already free
    Entering boot debugger:
    [130ee5]:
    and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
    I don't know what the ACPI tables are .. and how i can fix this...
    Anyone who knows this... please help..
    Thanx a lot..

    I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

  • Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

    Help!
    I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
    HpSdpAppCoreApp
    "The feature you are trying to use in on a network resource that is unavailable.
    Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
    The last time I dug through some files on my own, bad things happened.
    Thanks,
    C

    good gracious, Chris ...
    okay, try applying the general advice on installation problems given here:
    http://docs.info.apple.com/article.html?artnum=93976
    ... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • Installation problem on SUSE 12.1

    Hi
    I'm a Linux beginner and I am trying to install LV on SUSE 12.1
    I've also posted my problems on Lava:
    http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
    The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
     Any ideas?
    Is there a way to debug to see what's going on?
    Cheers,
    Mike
    Solved!
    Go to Solution.

    Hi Mike,
    Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest. 
    Best,
    Dan N
    Applications Engineer
    National Instruments 

  • Installation Problem on Win8

    Hello all
    I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
    Thank you guys for your support.
    Installation Logs:
    java_install.log - Pastebin.com
    java_install_reg.log - Pastebin.com
    JavaDeployReg.log - Pastebin.com

    Hi people!
    I have two problems with nokia suite...
    first of all I can't install it at my windows 8.1, I receive the message attached...
    Second,
    in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
    can somebody help me?
    Attachments:
    mokiasuit.png ‏13 KB

  • Installation problem on RHEL4 ..

    Installation problem on RHEL4 (Red Hat Enterprise 4) i have
    install start at unzip tar.gz and tar -xf .... now i have run
    ./installFMS it show
    ./fmsini: error while loading shared libraries: libstdc++.so.5:
    cannot open shar
    ed object file: No such file or directory
    ERROR: Your are running the Macromedia Flash Media Server
    installer
    on the wrong platform.
    it not support for fedora or anything else?
    plz help....

    would be nice if someone responded to this.... Macromedia
    wouldn't have been this lax in giving a reply :) AND they keep up
    with OS updates too :)

  • Xp_logininfo Installation problem

    Hello gurus,
    I'm facing the same problem as described in this link:
    Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
    the error I get is similiar:
    <i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
    but I just don't get how to solve it.
    -I've tried to use the profiler but didn't find any information that will help me to solve.
    -One of the guys wrote to add "logon rights" to the user ... what does it mean ?
    Please advice,
    Dimitry Haritonov

    Hi sven,
    Thank you very much for the quick and direct answer.
    The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
    I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
    Best regards,
    Dimitry Haritonov

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • Installation problem for Java EE 5 SDK Update 2

    Hi ,
    I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
    http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
    Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
    Thanks in advance.

    For the difference between Java EE and Java SE read here:
    http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
    For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
    http://forum.java.sun.com/thread.jspa?threadID=738559
    Andrea

  • PPStream installation problem on Windows 7

    I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
    I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

    很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
    very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

Maybe you are looking for