Toner leak and printer damage, toner cartridge 124A

My yellow toner cartridge leaked all over my printer. I got it cleaned up and replaced the toner cartridge, but now the inks are very washed out. The black is faded and the color is really faded. The white paper, where there should be no printing is now a light gray as if the black toner is printing very lightly. Does anyone know how I can fix it? I have run the demo sheet and recalibrated but nothing has changed. The printer works very well otherwise.
Alternatively, if this is something that cannot be fixed, are there other printers that use the 124A toner cartridges? I have two more sets of black and color toner cartridges and would like to be able to use them if the printing problem cannot be repaired.

Hi agniss,
I just sent you a private message.
If you are not sure how to check your post forum messages, this has instructions.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

In iOS, is there a way to insert both a high tone mark and a nasal tone mark on the same letter using the English (U.S. Extended) keyboard?

For example: į́ and ę́. The notation required for the Navajo language is possible using the desktop implementation of the keyboard, but I am not sure if it can be done with the iOS implementation.

by_ron wrote:
It seems the Vietnamese layout does not display the correct character notation
Yes, that post by me was totally erroneous, it was intended for a different discussion. Sorry for the confusion.

CM6040 MFP - LOW TONER MESSAGE FROM PRINTER TO COMPUTER WITHOUT ERROR CODE OR COLOR

The printer is sending "low toner/ink" message to whomever prints. The printer shows no error code on the display and prints fine. The message the printer sends to the computer does not indicate what color is low. We all operate on Windows 7 which we just upgraded to a few weeks ago. Like I said, the printer continues to print fine and does not display an error code on the display but continues to send this annoying message everytime one prints. Any ideas on what is causing this message?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HiIs there a way to print continuous tone on old HP5000 BW printer, instead of halftone output?

I am using a HP5000 printer and want to reproduce newsletters. All the images (continuous tone) are outputing as halftones. Is it possible to print continuous tone with this laser printer?

Hey there PrincessCupcake!
Thanks for the detailed post back to me.
If this was at one time an option for you and now is not, it would make sense to me that an update of some sort had made the option null and void for you, especially if you have completely uninstalled the printer driver and software and then reinstalled it. If the option was going to be available, doing the uninstall and reinstall would have fixed it in a jiffy.
I am out of ideas as to any other cause besides an update, as you mentioned. If you have installed the printer on another computer, see if the options are there, if not, they aren't available.
Happy Monday to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

Screen has a bluish tint after fast user switching and then warning tone

Hi all I'm having a bit of a problem that I hope someone can help me with. First the details, I have a MBP bought in late '07 and running Tiger. I was doing full backups using "Backup" and I also had Safari, iTunes, and Word open. I briefly switched to my other account using fast user switching and when I returned to the original account the whole screen had a blue tint to it. Like the color profile was off. This has happened before and a restart usually cures it, I haven't restarted yet but I am fairly certain it will correct the problem this time too. But is there anyway to prevent this? My second question is the one I'm more worried about. It also has happened before but usually when using more CPU intensive applications. When I went to System Preferences and opened up the display preferences in an attempt to correct the previous problem I heard a very loud tone. Like some type of warning tone, it was loud enough that it startled me. I had iTunes playing and after the tone the music got very quiet but relaunching it brought it back to normal. I'm just wondering is this some type of warning tone? Is it something I should be concerned about? Besides the music everything else seemed unaffected, although the previous times that this has happened usually when using handbrake there was noticeable problems after the tone (like applications crashing). All of these problems are gone after the computer is restarted though. Does anyone have any insight on these issues? Thank you.
-James

OK I ran TechTool and everything passed except for the volume scan. Then I checked this with Disk Utility and the HD failed for a few minor reasons, like invalid block count. I repaired it using the fsck -fy command in single user mode. The computer seems a little faster now. I don't know if this error is related to the beep in any way, I may try talking to an Apple genius to see if they know. Since it seems like pretty minor errors I'm not too worried about it but it does seem to be happening often. The last time I had this error was when I posted a question here about it which I just checked was on March 1st. So this error happened again after a little more than 2 weeks which seems excessive to me. Any thoughts?

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Officejet Pro 8000 A809 - can I print just black and have empty color cartridge?

I saw in a previous post entitled "PSC 1410 - can I print just black and have empty color cartridge"
that the printer does color underprinting even when printing black and white, to prevent bleeding.
My question is, is this also true when selecting the grayscale printing option in the printer properties dialog box?
I installed the printer using an ethernet connection to a Dell Inspiron 8200 laptop computer running Windows XP Professional

Yes you will still need the color cartridge. The printer uses what is called under printing, it still uses some of the color cartridge's ink in this process, even when printing in just black, the reason is to stop the black from "bleeding"
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

Hi rsample,
Thank you for visiting Apple Support Communities.
Your symptoms make it sound like the iPhone side switch is set to silent mode.
iOS: Understanding sounds, ringtones, and alerts
Set your device to silent mode
iPhone: Toggle the Ring/Silent switch on the side of the device.
Best Regards,
Nubz

Make HP7510 printer use other cartridge when printing black and white document.

Hi,
HP7510 inkjet printer.
Assuming normal black is used up. Will the printer continue with the
photo black cartridge to complete documets?
Can I configure the printer to do so?
Claes

The photo cartridge is used for graphics and printing on photo paper. You may be able to use the photo cartridge by selecting Photo paper in the driver settings. This is not a recommended solution - printing will be slower and it may put too much ink on the page. It may be an OK solution for temporary printing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Conference call and get disconnect tone

Hi,
I had a issues as below:-
Now have 5 party in conference call, 2 from internal and 3 call to PSTN's user. Suddenly one of the PSTN user call are drop then the remaining user in conference call are hearding the disconnect tone for few minutes. May I know how to shorted the disconnect tone or totally no disconnect tone after the PSTN user disconnect? Please let me know how to solved this.
I using CUCM 6.1 and conference station 7936.
Thank you.

Hey! Most likely it is an engineering issue, should be fixed soon with the newest update.
Check this related thread: How to add caller to Facetime audio call in ios8?

I cannot make the "Tones" tab appear into my iTunes even if I go to Preferences and click the "Tones" button. What do I do?

I just recently bought the iPhone 5 and updated to the newest version of iTunes and I cannot make the ring"tones" tab appear. I even went to preferences and clicked on the "tones" button so that the "tones" tab would appear, and it won't appear. I reset the computer and everything. If someone could please tell me how to make the "tones" tab actually appear, that would be wonderful.
Thank you!

Hi Friend,
In iTunes,
Click Edit --> Preferences --> General Icon Ensure that
Ringtones is checked. If not, check it then click OK…
Hope it will be helpful

My iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

Changed cartridge and printer no longer prints from pc

Changed cartridge and printer no longer prints from pc, as if it is no longer connected

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen? If you are using Windows running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

Hp 5510 won't print black before and after installing new cartridge. have done specified checks.

HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.

sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here.

Toner leak and printer damage, toner cartridge 124A

Similar Messages

Maybe you are looking for