Toner lights and power light blinks and printer won't work

The ink lights are blinking in sequence along with the power button.  I have changed all of the ink cartridges with the correct 920 type and have made sure they are all seated correctly.  I have also flipped the cartridge carrier lever and reset that.  Everything seams to be fine.  My computer tells me that all the ink levels are full after inserting the new cartridges.  I have rebooted the printer with and without the usb connection, cleared all printer jobs and it still keeps blinking and won't print.  What else can I do??  Appreciate any suggestions.

Hi @salvador64 , and welcome to the HP Forums!
I understand you're experiencing printer issues. I would like to help!
I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also recommend  running through the steps in this document:
Blinking Lights on the HP Officejet 7000
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • HP 6940: carriage stuck at left side, resume and power lights flashing

    I've used this printer under ubuntu/linux for about 2-1/2 years. Color printing has always been a challenge, I get about one usable page per 5 test pages. About a year ago, it stopped printing; hp-info (part of the hplip package) said the color cartridge was defective. I was able to get black&white printing by removing the color cartridge.
    This week, I had to print some stuff in color. I pulled the color cartridge out of its ziplock, re-installed it, and ran a quick cleaning. A test print showed that wasn't enough, and I ran a full cleaning, after which I was able to print a good test page, and then one page of my job.
    When I tried to print the second page, nothing happened, and the resume and power lights started flashing. I cycled power on the printer (I have to do this very frequently, even for black and white jobs), but it didn't fix the problem. I pushed resume, but no dice. I pulled the back cover to check for paper jams: nothing jammed. Replaced the back cover, pulled the paper from the tray: nothing jammed. Replaced the paper in the tray. Pushed resume again: it made noise, but didn't clear the problem.
    I opened the lid, and the carriage was all the way to the left-hand side. Pushed resume: a small plate in the loading dock at the right-hand side moved forward and then back, but the carriage stayed at the left-hand side. Tried (gently) to move it to the right, but it's firmly in position.
    hp-info now says:
    "status-desc                   Paper or cartridge carriage jammed"
    The color cartridge is an HP cartridge, and came with the printer. The paper is HP paper.
    Any suggestions?

    Hello there! Welcome to the forums @roberts460 
    I would suggest checking out the guide below for troubleshooting blinking lights to try and help resolve the issue you're having with your Deskjet 460c.
    Blinking Lights on the HP Deskjet 460 and Officejet H470 Mobile Printer Series
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Service Module / HP Officejet 100 Mobile L411. The Resume and Power lights still flash.

    Replaced Service Module on HP Officejet 100 Mobile L411. The Resume and Power lights still flash. Printer still thinks the Service Module is still almost full. Need assistance.

    roadman18,
    This article should cover the issue you are experiencing. Give the steps outlined under the light patern a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

    my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

    Try the remaining items in the white-screen topic of.
    iPod touch: Hardware troubleshooting
    If not successful. let the battery fully drain and then charfe for an hour and try again.
    Frequently a white scree nis due to a hardware problem.

  • WRT54GS all light up & power keep blinking

    Hi,
    my WRT54GS all light up & power keep blinking.
    Does anyone know what is wrong?
    Tks

    Your  router is fried. Try resetting it for 1 minute if its lit  up normally then it will work other wise you may have to replace it .

  • New pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan.

    Have new pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan. It will print via usb and I've downloaded the full drivers Full_win_WW_140_408 but won't install. I've also tried to install the original drivers but they were for windows XP. The printer is approx 7 years old but still works (or did!)

    Hello RevPhil,
    Welcome to the forums!
    I noticed your post about your printer not installing properly for you on your Windows 8.1.
    I would suggest trying to use the HP Print and Scan Doctor to install the printer.
    If that doesn't work, please let me know what exactly happens when you try to install, for example, do you see an error message or code? Does the installation stop?
    Have you tried installing both USB and wireless methods?
    Hope to hear back from you shorly!
    Enjoy your weekend,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • When attempting to print in Pages, I keep getting a message that no printer is detected. I have checked all connections and they are solid, this printer has always worked before, and even if I try to add it, I still get that message.

    When attempting to print in Pages, I keep getting a message that no printer is detected. I have checked all connections and they are solid, this printer has always worked before, and even if I try to add it, I still get that message. I can print from all other applications, just not any Pages documents.

    You may just have an outdated printer driver.
    Menu > Edit > Print > Printer: Add Printer
    Peter

  • Apple update for Epson printers (16 Aug 13) has produced "rastertoescpII quit unexpectedly" message (and printer won't work)

    After downloading an update for 10.7 Lion, my printer won't work . . . and produces this message:
    "rastertoescpII quit unexpectedly.  This report will be sent to Apple automatically . . .
    "Process:         rastertoescpII [318]
    Path:            /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII
    Identifier:      rastertoescpII
    Version:         9.14 (9.14)
    Code Type:       X86-64 (Native)
    Parent Process:  cupsd [217]
    User ID:         26  . . . "

    Hello,
    I don't think I will be able to give you any points since I am not the OP, but thank you so much for your answer.
    I had a problem accessing the iTunes Store and APP Store last night although I had wi-fi access.  AppleCare had me delete the "system configuration" folder in Preferences and everthing worked fine afterwards.
    But, this morning my printer would not print.  It's Sunday and I can't get through to Epson, so I started a search at this forum and found your response.  Sure enough, even though I did not do a software update, the trashing of the System Configuration folder removed the computer name that always shows in Sharing.
    I typed it back in and now I am able to print.  Again, thank you.
    B.

  • I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    Visit HP's support site to see about downloading an updated driver. Or you can check at support.apple.com/downloads/ for new HP printer drivers package.

  • My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

    my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • When i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warren

    when i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warrenty

    When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty

  • I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    You need to reinstall the printer driver, and set up the printer on the new hard drive.
    The Canon site should have the driver. Download it and install.
    Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

  • Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

    Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

    What do you mnean that the screen does not work?
    When you touch the screen the iPod does not respond?
    Nothing shows on the screen?
    Or what?

  • I had to get a new ITouch and now my app Tempo Magic won't work. It allows me to do evertyhing but play the music. When I hit  play it kicks me out - any help would be appreciated. Thank you

    I had to get a new ITouch and now my app Temp Magic won't work. It allows me to select the temp and music I want but when I hit play it kicks me out. Can someone please help me resolve this? Thanks!

    Try here:
    iOS: Troubleshooting applications purchased from the App Store

  • "completion insight" and "change case as you type" won't work for sql file

    Hi there,
    Just updated to 3.1 on my Mac Lion. It's very likely a bug since it used the work with 3.0.
    I have a "temp.sql" file where I store several queries. I start SQL Developer, open "temp.sql", connect to a DB but "completion insight" and "change case as you type" won't work anymore.
    If I click in "Unshared SQL Worksheet", the new worksheet tab will work fine with completion and change case, but I want to use my temp.sql and save things there when closing the application.
    To reproduce yourself the issue:
    Open SQL Dev, connect to a DB (it will open a worksheet), do some queries and check that change case and completion are working, quit SQL Dev, but save the worksheet in a sql file before. Re-open SQL Dev and open the sql file. Connect to the same DB and try to change the queries or create another. Completion and change case won't work anymore.
    About
    Oracle SQL Developer 3.1.07
    Version 3.1.07
    Build MAIN-07.42
    Copyright © 2005, 2011 Oracle. All Rights Reserved.
    IDE Version: 11.1.1.4.37.59.48
    Product ID: oracle.sqldeveloper
    Product Version: 11.2.0.07.42
    Version
    Component     Version
    =========     =======
    Java(TM) Platform     1.6.0_31
    Oracle IDE     3.1.07.42
    Versioning Support     3.1.07.42

    Well, it's partially working, if your sql file is big (like mine), say with more than 1000 lines, then, maybe because of memory usage, the automatic completion won't work as expected, though, sometimes, after a while, crtl-space would stil work.
    So, the problem may have been addressed, but I believe this feature can be definitely improved.

  • HT201364 texmate and git 1.8.4.2 won't work on OS X Mavericks. I've downloaded them repeatedly and the following errors display "Textmate is damaged and can't be opened"  and Git states "can't be opened because it's from an unidentified developer". Please

    texmate and git 1.8.4.2 won't work on OS X Mavericks. I've downloaded them repeatedly and the following errors display "Textmate is damaged and can't be opened"  and Git states "can't be opened because it's from an unidentified developer". Please help!

    MedlockDustin,
    for TextMate, you’ll need to download TextMate 2.0 alpha, since earlier versions of TextMate aren’t supported on Mavericks. The file will be named “nightly”; save it to your desktop. Once the “nightly” file has finished downloading, rename it to “TextMate.app.tar.bz2” — that will give it the “BZ” icon on your desktop. Once it’s been renamed, you can double-click on it, and TextMate.app will appear on your desktop. Use your administrative login to move TextMate.app to your Applications folder.
    Regarding the “unidentified developer” message displayed by trying to open git 1.8.4.2, please refer to this Apple page for the workaround.

Maybe you are looking for