Tons of errors with 2014.1 running on OS X Yosemite

Finding that Edge Animate CC 2014.1 is freezing within 5-10 minutes of use. Telling me to save work and restart every 5-10 minutes as well (I do anyway!)
-creates corrupt JS files that my server won't let me upload.
-crashes MacBook Pro 2013 with Yosemite
-when loading symbols it says JavaScript is corrupt
Any sight of an update soon to address Yosemite compatibility?

Are you kidding? I have had more help learning and solving problems on my Edge projects from your forum contributions and samples (those sample projects are like gold for us learners!) than just about any other contributor. Keep it up.
I'm just really frustrated with Adobe. I almost get the feeling that Adobe is just on the verge of giving up on Edge. Like they know that it's not going to work for them in the long run and so they're holding back resources on development. Otherwise they'd have fixed it long ago. There are NO other Adobe products that are so unfunctional. It's absolutely unlike Adobe and that's what makes me wonder if it's worth continuing to invest the time to develop my use of it. (And I have been using it and publishing Edge projects for almost a year now. Went out on a limb to talk my publisher into taking a chance on adding some development time into putting it into our web publishing stream.)

Similar Messages

Tons of errors with sync and restore

Let me state first, that this iPod Classic i brand new, and has latest software installed. So does my Mac Mini (also brand new). All latest software is installed.
I have a large library, therefore i chose a Classic. From the very first sync, errors startet happening.
First Error: After setting up the iPod, asking to sync entire library, the iPod failed after 2 hours or so.
After it failed, i unplugged and saw, that it had transfered 500 songs successfully, and played them as it should.
I plugged it in after 10 minutes of play, to sync again.
iTunes warns, that it has found an iPod that needs to be restored.... WHY? It was working fine!
iPod cannot Restore, it is in use?!?
I finally get it restored, and start over with the sync. I go through step 1 again.
iPod will not restore, at all. Not untill i run a repair from Disc Utility.
After 4 attempts, i finally get no errors on the disc in Disc Utility. I had to completely format the disc, and reinstall the iPod.
It is syncing now! 30 tracks at the time, then this error happens, "iTunes could not copy %songname%, archive does not exist". My iTunes is in Danish, so i am unsure of the English wording of that error.
I try syncing again, works fine for 30 tracks, then same error. This has been going on for the last 20 attempts of syncing.
Anyone have any idea, of what is going on? I am not far from taking it back to the store and requesting af replacement device, or money back for that matter.

I would do the following. Shut down (power off) the Mac mini. Disconnect all USB devices (you can leave standard USB keyboard/mouse connected if used). Start up the Mac mini.
Since the iPod may have some data corruption issues, put it into Disk Mode
http://support.apple.com/kb/ht1363
On the Mac mini, run iTunes, and connect the iPod (in Disk Mode) by itself to a direct USB port on the Mac mini. iTunes should prompt you to do a Restore. Do the Restore. During the Restore process, elect NOT to sync any songs to the iPod.
In iTunes, if the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod should appear in the sidebar, under DEVICES, after the Restore. Select it there. To the right, the iPod's Summary screen is shown. Toward the top, there is a bar of buttons starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. This is the switch to enable automatic syncing. Choose the option to sync Entire music library. Click Apply. Hopefully it goes through the sync process properly this time.

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

Runtime Error with Multiple Applications running in one Ear.

I have the Coherence and Tangosol jar files loaded in my ear and the coherence-cache-config.xml in the classpath, if i add two web apps to this ear that use the same jars i get this error:
SRVE0026E: [Servlet Error]-[action]: java.lang.NoClassDefFoundError: com.tangosol.util.ConcurrentMap
but if i run the ear with either web app seperately - it works fine.
I know i have some kind of a configuration issue - i just don't know what.
Any help would be appreciated.
Thanks..

Hi,
what application server do you use, and where do you have the coherence.jar and tangosol.jar?
Best regards,
Robert

Error with Informatica when running the data load for BI Apps

Hi All,
We are facing a different issue on prod which we haven't got on QA. Below given is session log :
Target tables:
W_ORDER_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Sep 22 10:36:16 2010)
READER_1_1_1> BLKR_16019 Read [885] rows, read [0] error rows for source table [S_ORDER_BU] instance name [S_ORDER_BU]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_1> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
sqlstate = 42S02
Database driver error...
Function Name : Execute
SQL Stmt : SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
DB2 Fatal Error].
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [LKP_ETL_PROC_WID], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_ORDER_PARTY] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Wed Sep 22 10:36:16 2010
In the above log W_PARAM_G table is a warehouse table. We have checked Informatica to find out the issue but there is no error in informatica.
Thanks in advance.
Deepak.

Hi Sandeep,
Yes but if you see the log ,its connecting to OLTP DB(DB2 for Siebel source DB),which it shouldnt
KPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
*CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]*
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
I Have check the mapplet ,its same no issues in that as well.
Regards,
Deepak.

Error with Attribute Change Run - Urjent

Hi All,
In our scenario we will load master data from APO&ECC to BW.When we are doing attribute change run we are geetting short dump and jobs are cancelling every time .
Please fidn the details below.
Short Dump : ORA-14400 with ABAP/4 DBIF_RSQL_SQL_ERROR..
When I have searched in the forum I got some information saying that we need to drop the index and recreate the index.But we have around 40 cubes.Then how I am going to deside on which I need to the relavent settings.
Please provide me the proper answer.We are facing this problem from past last two days.
Regards
Ramakanth.

Hi,
You can try going to the monitor for Attribute change run from RSA1 >> tools >> apply change run or from Transaction RSATTR which will schedule/display attribute change run. Here you can have an option called change run monitor (Monitor icon). this wil show the status of change run including which all info objects are affected, and if its hitting the aggregates of any cubes. There are scenarios where the attribute change run failed with message that it was hitting/affecting aggregates of some infocubes. In case we had to switch off aggregates and trigger the change run again and then swtich on the aggregates after the change run is over.
And sometimes ACR goes on running for a long time in such case we need to check which Aggregate the ACR is currently changing and need to deactivate that aggregate.
But before deactivating an aggregate you need to check the data present in that and the usage of the aggregate.
Please use the table RSDDCHNGPROT and find out the infocube affected by this change run and de-activate "ALL" the aggregates
of the infocube listed under CNSID=0. Then start the change-run.
You can rebuild/refill the aggregates once the change-run is finished.This is necessary because there are inconsistencies in the aggregates
Most of the times we have problem with the Attribute Change Run(ACR) running because ACR and the Roll Up's for Aggregates cannot run in parallel.
Also you can try Tcode CHANGERUNMONI/program RSDDS_CHANGERUN_MONITOR to view this data.
176606 - Apply Hierarchy/Attribute change ... long runtime
175309 - Hierarchy/attribute - change run improved
oss note 322644
Hope this helps.
Thanks,
JituK

YouTube error with iPad 2 running iOS5

I get an error 'The operation could not be completed' anytime I try to use YouTube on my iPad. I can open the YouTube application and see video options but get the error when I try to play them. I get the same message when trying to play YouTube videos either in Safari or Facebook. The iPad is a week old and I immediately updated to iOS5 so I don't know if it's a problem unique to iOS5 or what. Can anyone help?

Another update - Fixed thanks to another post by doing the following on my SonicWALL...
Security Services --> Gateway Anti-Virus --> Configure Gateway AV Settings --> Enable HTTP Byte-Range requests with Gateway AV
Click OK

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Thanks Tim,
I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
At the moment the most recurrent problem is this:
http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
which has been longly speculated here:
http://forum.thinkpads.com/viewtopic.php?t=47755
My other angst is the boot-time chkdsk hang-up problem:
http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
This is my T61p configuration:
Intel Core 2 Duo T7700 2.4GHz
BIOS version 1.26-1.06
4GB RAM 2 SO-DIMMs
nVidia Quadro FX 570m with 512MB VRAM
WUXGA LCD
Seagate 7200.2 160 GB
4GB RAM 2 SO-DIMMs
Windows Vista Ultimate 32bit (waiting to move to 64bit)
thanks,
andrea
Message Edited by abarbieri on 12-05-2007 03:48 PM
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

Could not initialize Photoshop because of a program error" with PS CC 2014

I get "Could not initialize Photoshop because of a program error" with PS CC 2014 on a 2099 Macbook Pro running Mavericks. Then the program closes. Can anyone help?

Could be corrupt preferences, a problem with the OS font cache, or some other problem with the OS.
First, try resetting the preferences.

Just updated CC 2014, Photoshop launches with message to run Photoshop Installer: where is this?

On updating Photoshop CC 2014 and launching I get a dialog, "One or more files in the Adobe Application Support folder, necessary for sunning Photoshop, are missing. Please run the Photoshop installer and reinstall Photoshop."
Where is Photoshop Installer?
This update also wiped all my extensions without warning, not so cool Adobe.

Sometimes uninstalling old versions can take out common files. I uninstalled CS4 only to get errors with CS6. I had to reinstall CS6 to get rid of the errors.
In any case you may want to keep/install CC for a while. The extensions technology has changed and what ran in CC, won't in CC 2014.
If you depend on your legacy extensions, at least you want to hold on to CC until they are updated. And of course if any glitches show up in 2014.2 and future updates, you may want CC as a backup until it's corrected.
I may have missed some details, so these links should help you.
Photoshop Help | New features summary
Adobe Configurator and deprecated Flash-based panel support in Adobe CC products
Photoshop CC (2014) | serendipity…

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

ABAP/4 run time error with error code SNAP_NO_NEW_ENTRY

Dear All,
I've installed SAP R/3 IDES on Oracle on Windows 2003 server.After clicking Log on button , I should be asked to enter client,user and password.But, my system does not display such details.Instead I get ABAP/4 run time error with error code SNAP_NO_NEW_ENTRY that too after a long time.
Can you please address what is the reason for this problem and how to over ride it?
Regards,
S.Suresh

Hi,
the most probable reason is an archiver stuck. Backup the archived redo log files and delete them afterwards.
The database will archive some more logs after this. Handle them in the same manor. For complete explanation search for brtools.
Regards
Ralph Ganszky

Error when trying to run an application that worked when built with 8.6

I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6. Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009. The error has to do with the Mean.vi. It claims it cannot find it. The error I get reads as follows:
An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'. LabVIEW load error code 3: Could not load front panel. I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code. Please respond as soon as possible as this will quickly start to impact my testing schedule. Thank You.
Solved!
Go to Solution.

Hi!
The same problem ???
I discussed it with my local NI technical support team. The application works without any problems now.
Basic rule: when creating an installer be sure that option "Run Time Engine xxxx" in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
Best regards.
Attachments:
ADDINST.png ‏13 KB

I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Tons of errors with 2014.1 running on OS X Yosemite

Similar Messages

Maybe you are looking for