Tons of problems while exporting - small video, squished video, flashing titles? AHHH!

Hi everyone. I'm running into some serious frustration trying to export a video with the intention of either putting it on YouTube or Vimeo. I have tried so many different compression and format settings, only to run into different problems with each combination I use. Sometimes I'll get horizontally squished video (this happens any time I try to export in 16:9 widescreen), other times I'll get titles that flash super quickly (this happens when I try to export as a QuickTime file), sometimes I'll get proportional video that ends up being small.
Basically, I'm working with Adobe Premiere Pro - yes, the original. I haven't been able to afford the upgrade, unfortunately. That said, I'm working in a 48 kHz widescreen mode. In my closest attempt, the clips in the video that were not altered by either effects or titles are totally the way that I want them to appear (in the video I have linked, the clips of the two guys starting at 0:24 is what I want). In addition however, all of the clips that do have either titles or effects on them are shrunk - you'll see it. What's the deal!? How can I just export this damn video so that the entire thing looks the way that those full-screen clips do?
Here's the video of my closest attempt so far:
http://www.youtube.com/watch?v=B3hJuGy8ALU
Thanks in advance for any help!
Sean

Not sure where the other post is, but for tips with Tiltes, this ARTICLE offers some good ones.
Good luck,
Hunt

Similar Messages

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Problem While Exporting the Output

Dear All ,
I am facing a problem while exporting the ALV output to Spreadsheet.
When I click on Menu LIST->Export-->Spreadsheet, One pop is coming with title "Save XXL list object in SAPOffice" In that it is asking me to save Name of the List object and a Title.
Please guide me what needs to be done for this.
Regards,
Nikhil

Hi, Nikhil
You can USE a Short Cut Key Ctrl + Shift + F9 and than select the type in you want to download in your case you will select Spreadsheet
Regards,
Faisal

PREMIERE PRO CS5.5 Gamma problem while exporting project to mjpeg A or B

Dear Sir,
I'm in a big ****. I've directed and edited 1h documentary for Finnish television, also, the technical specs requested by the TV Channel is all production Broadcast masters must be encoded with Apple ProRES codec or MJPEG A or B.
As i'm working on PC (win7), the ProRES codec doesn't exist on PC system, so i've done the export to MJPEG. The problem is i have a different gamma level when i watch the final export with Quicktime or VLC. Of course i can adjust the level in those players, but it doesnt effect the file. When i import the Qt file into a Premiere sequence, the gamma level is still **** and different from my original level i have from my timeline and preview window. If i export the project to H264 1920x1080p25, then the gamma is perfect with Qt, VLC and WinMedia player. But the TV station don't wanna work with H264. Deadline is on next monday, and i can't send a Qt MJPEG file with wrong gamma !!!Any chance to find a solution to fix it ??? After reading different forum, i can see this problem exist since many years and never been solved.
What can i do ??
Denis.

Things is my prpject includ few effect plugins i bought, so what ever i could find a mac, not your i could export xml project to finalcut with plugins it dont have
Denis
Sent from my iPad.
Le 31 mai 2013 à 15:20, Fuzzy Barsik <[email protected]> a écrit :
Re: PREMIERE PRO CS5.5 Gamma problem while exporting project to mjpeg A or B
created by Fuzzy Barsik in Premiere Pro - View the full discussion
If it were me, I wouldn't encode to MJPEG.
So as to encode to ProRes on Windows you can utilise any solution based on ffmpeg/ffmbc or better yet find a Mac with Final Cut or Compressor installed for delivering critical work.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5368019#5368019
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5368019#5368019
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5368019#5368019. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Sync problems while exporting

Hi everyone--
I have one clip in my sequence where the audio was out of sync on the actual tape. In Final Cut, I was able to align it so that it matched up with the video. However, when I go to export, FCP realigns the video and audio how it was on the tape, which is not usable.
I've tried going to modify and unlinking the video from the audio but it hasn't helped. How can I get my sequence to export just as it is on the timeline without it "trying to fix itself"?

• How do you know the camera's audio was recorded out of sync?
• How are you monitoring your audio?
Occasionally people set up a monitoring situation where the signal path introduces a perceivable lag in the audio. Then, they adjust the sync to fix a problem that doesn't really exist.
x

Problem while Exporting Table Data to Excel Sheet

Hi All,
Im getting problem while downloading the table data to Excel.
Steps i was fallowed:
1)created Context node with four attributs.
2)created one attribut(resource) type: com.sap.ide.webdynpro.uielementdefinitions.Resource
3)Taken one Filedownload UI and Property resource bounded to (resource)
4)Added required jar file in the library and copied the same jar file in the navigator lib file
written the necessary coding but showing the below problem in the Browser
You must Flush before accessing the resource content
Please give me any suggestion on this
Regards
Polaka

Hi
Check this might help with Brian Fernandes comments.
Flush?
Regards
Arun Jaiswal

Problem while exporting to PDF with japanese character in Crystal Report X1

Hi,
I am using Crystal report X1 with classic ASP on a Windows 2003 Enterprise Server, SP 2. In my application, I have to export the report into PDF, CSV, DOC formats. I am have Japanese strings in the report. While exporting to PDF, empty boxes has displayed in the place of Japanese string and in CSV file, question mark has been displayed instead of Japanese string. But the Doc file is exported correctly. I have not installed any language support software either in server or in client machine. I have used MS Gothic and Arial Unicode MS fonts for the text-objects which has Japanese strings.
Please give me a solution so that I will get PDF file with Japanese strings instead of empty box or question mark.
Do I need to install any language support pack software?
Thanks in advance.
Regards,
Manju

Hi Don,
Thank You for your reply. I have resolved the issue of exporting to pdf from crystal report X1 having Japanese data after installing the language pack.
But when I am exporting to CSV or TXT, i am getting ??? instead of Japanese characters. I have tried "export" through crystal report designer and got ??? instead of Japanese.
The Crystal report version I am using is Crystal report X1 11.0.0.1282
Crystal Report Desinger is installed in Windows Xp machine
Font set for Text object is Arial Unicode MS, MS PMincho, MS PGothic
Does the Crystal report X1 11.0.0.1282 has the UTF-8 support for CVS / txt
Please provide me a solution
Thanks in advance,
Regards,
Manju

Problem while exporting a report using CSV

Dear friends / experts ,
after successful genration of report my end users want to export that report i.e
while exporting a report in portal using " Export CSV" option , am getting CSV file as semicolon ( seperated instead coma(,)
please help me where can i change those settings to achive this CSV file with coma separated.
thanks in advance..
regards
anand

Check the below link
http://help.sap.com/saphelp_smehp1/helpdata/en/d2/11a28fc26d4042a6d230a9783152f2/content.htm
[Steps to change the delimiter in csv export WAD or portal|http://forums.sdn.sap.com/thread.jspa?threadID=1988651]
To set the field separator, go to SPRO and choose
-> SAP Reference IMG
    -> SAP Customizing Implementation Guide
         -> SAP NetWeaver
              -> Business Intelligence
                   -> Links to Other Source Systems
                        -> Connection Between Flatfile and BI System
                                 -> Set options for uploading flat files
Regards
KP
Edited by: Konduru Prashanth. on Feb 29, 2012 3:13 PM

Problem while exporting the text written on web-template to excel.

Hi Experts,
I created a report at WAD ,while exporting it to excel all the web items got exported except for the text written on the web-template.
Is it possible to export the text written on web-template to excel???
Also i dont want to add the text-item.
Edited by: shyam@apa on Mar 6, 2009 8:42 AM
Edited by: shyam@apa on Mar 6, 2009 8:43 AM

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

PP CS4 Problem with exported H.264 .mp4 video. Can't AME do proper encoding?

Trying to export a Video of ~60mins using the H.264 Codec .mp4 which converts in AME successfully, allthough when playing back the f
ile, it has problems after ~40mins. When i try to jump to a later point in the timeline to playback i.e. 48th minute or 50:10 or wha
tever, the image freezes, audio continues and it takes 10-20 secs untill the video image continues.
I tried different playback programms like VLC,Windows media etc. and different compressions 2-5Mbps as CBR and VBR1 / 2, nothing cha
nged.
Source is Sony DV and i have some still images as .png. Since the first 30mins work alright, i thought i try out if something with t
he source material in the timeline is causing the problem , so i cut after the 30st minute and copied the first 30mins behind that
to get a 60mins video, but exaclty the same playback issue after ~40th minute.
Is this an most likely a problem caused by AME using H.264 .mp4 Codec?
Other videos i did months before in the same way using the same source material worked fine. Adobe Premiere and AME is up to date!
Thank you

hmn sounds like it makes sense. I have seen that "i-Frame in GOP" somewhere in PP i think.
Allthough i recall that i had videos i exported which played fine till the end with no delay at a later seek distance.
I noticed that quicktime player has the same issue but is much quicker than VLC.
Is there a work arround or alternative? Can it be improved?
I need H.264 & .mp4 for webpodcast on vimeo.com
The only thing which looks strange to me ist that the lenght of the delay showing the images (i guess finding it) takes almost the same time
as on other later point like at the very end. Id assume that if its normal behavior the delay should become bigger and bigger with a later point in time ?
Appreciate your time to answer jim,Thanks
Markus

Problem beim Export aus PP CS4 - Video Kaputt

Hey Leute!
Ich habe folgendes Problem:
Ich arbeite an einem Projekt in Premiere Pro CS4, mit Aufnahmen aus einer EOS 7D runtercodiert von 1080p h264 auf 720p h264. Das nur mal vorweg
Ich habe so bereits einige Projekte bewältigt und erfolgreich in h264 / .mp4 problemlos exportiert.
Wenn ich jetzt bei dem Projekt jedoch meine Timeline im Media Encoder exportiere hat die Datei einen riesen Fehler. Aber nicht irgendwo sondern immer nur ab einem gewissen Punkt (nämlich ab 1:11). Ab diesem Punkt blinken die Aufnahmen hin und her, ich bekomme grüne flashs usw...
Seht es euch ab 1:11 (bzw ab dem "jetzt gehts los freunde hier!") selbst an: (68mb - stream)
http://downloads.made2watch.de/kunden/sanchez/Sequenz01.mp4
Das lutige ist, es liegt anscheinend nicht an den exporteinstellungen, den egal in welchem Format ich exportiere, der Fehler kommt immer an der selben Stelle. Auch wenn ich einen Anderen Arbeitsbereich wähle. (der zb später anfängt.)
Um klar zu stellen:
In der Timeline selbst in Premiere habe ich keine Probleme; alles wird einwandfrei in Echtzeit abgespielt
Die Rohdateien funktionieren ansich auch alle ohne Probleme (lassen sich öffnen, abspielen usw)
Ich habe bereits das material auf eine Andere Platte kopiert und von dort aus Exportiert (um evtl. Festplattenfehler auszuschließen) - hat nicht geholfen
Selbstverständlich bin ich auch durch Neustarts, Cache Leeren und den ganzen anderen Standardkram bereits durch - ohne Erfolg
Habt ihr ideen woran das liegen kann? Ich sitze hier jetzt seit 2 stunden und bin am rumprobieren, die Deadline ist am besten Gestern...
Vielen Dank für Hilfe,
Sascha
P.S: Falls jemand Fragt:
Intel Core i7, 6GB Ram, Geforce 8800GT, Windows 7 Professional 64bit

hmn sounds like it makes sense. I have seen that "i-Frame in GOP" somewhere in PP i think.
Allthough i recall that i had videos i exported which played fine till the end with no delay at a later seek distance.
I noticed that quicktime player has the same issue but is much quicker than VLC.
Is there a work arround or alternative? Can it be improved?
I need H.264 & .mp4 for webpodcast on vimeo.com
The only thing which looks strange to me ist that the lenght of the delay showing the images (i guess finding it) takes almost the same time
as on other later point like at the very end. Id assume that if its normal behavior the delay should become bigger and bigger with a later point in time ?
Appreciate your time to answer jim,Thanks
Markus

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Problem While exporting HTML table to Excel(.CSV) in SharePoint 2010

Hi ,
I was exporting HTML table to .CSV file.
Problem is if any field contains '>' or '<' symbol then after exporting to .CSV, it was showing like '&gt' and '&lt' and the code is as below.
//Export HTML table to CSV
function toCSV() {
var data = document.getElementById('reportstable');
var csvData = [];
var tmpArr = [];
var tmpStr = '';
for (var i = 0; i < data.rows[0].cells.length; i++)
tmpArr.push((data.rows[0].cells[i].innerText || data.rows[0].cells[i].textContent));
csvData.push(tmpArr.join('\t'));
for (var i = 1; i < data.rows.length; i++)
tmpArr = [];
for (var j = 0; j < data.rows[0].cells.length; j++)
tmpArr.push(data.rows[i].cells[j].innerHTML);
csvData.push(tmpArr.join('\t'));
var output = csvData.join('\n');
SaveContents(output);
//For saving the file
function SaveContents(element) {
if (document.execCommand) {
var oWin = window.open("about:blank","_blank");
oWin.document.write(element);
oWin.document.close();
var success = oWin.document.execCommand('SaveAs', false, "FilteredReport.xls")
oWin.close();
Thanks in Advance

Hi,
According to your post, a problem occurred when you exported the HTML table to Excel(.CSV).
The following code for your reference:
function toCSV() {
var data = document.getElementById('reportstable');
var csvData = [];
var tmpArr = [];
var tmpStr = '';
for (var i = 0; i < data.rows[0].cells.length; i++)
tmpArr.push((data.rows[0].cells[i].innerText || data.rows[0].cells[i].textContent));
csvData.push(tmpArr.join('\t'));
for (var i = 1; i < data.rows.length; i++)
tmpArr = [];
for (var j = 0; j < data.rows[0].cells.length; j++)
tmpArr.push(data.rows[i].cells[j].innerHTML);
csvData.push(tmpArr.join('\t'));
var output = csvData.join('\n');
SaveContents(output.replace(/</g, '<').replace(/>/g, '>'));
Best Regards
Dennis Guo
TechNet Community Support

Problem while exporting ADF table to excel

Hello,
I have some columns of random size which are left padded with 0.
now the problem comes when I export the table containing these columns to excel, excel remove all those zeros from left.
eg: 000000003726819563(table column value) after exporting to excel shows as 3726819563.
Along with this I also want the footer part of table in excel.
For some of the columns I have summary filed(i.e. sum) at the footer of the table which I want to show in excel.
Can someone please guide me through these issues.
Thanks in advance.

Take a look at this: http://adfreusablecode.blogspot.com/2012/07/export-to-excel-with-styles.html
With this code you can export the footer: http://dl.dropbox.com/u/22312971/adf-samples/ExportToExcelDemo/ViewController/src/view/ExcelBean.java
Here is the entire demo project: http://dl.dropbox.com/u/22312971/adf-samples/ExportToExcelDemo.zip
I a few days I will update the above post.
Hope this help.
AP

Problem while exporting to PDF in the viewer

I have a report developed in crystal report 2008.and i am using java SDK to launch it in crystal report viewer.
Once i try to export it to PDF from viewer the font face changes differently
for example if my font is Arial Narrow it changes to ArialNarrow and Times New Roman changes to TimesNewRoman
even though both looks of same name..it looks differently while downloaded.

Moved to the Java Development - Crystal Reports forum.
Ludek

Tons of problems while exporting - small video, squished video, flashing titles? AHHH!

Similar Messages

Maybe you are looking for