Tons of "Upgrade" entries in ULSLog a few hours after applying updates

Hi there!
Yesterday we patched two SharePoint 2013 farms (latest SharePoint Security Update sts2013-kb2880994-fullfile-x64-glb.exe) and ran
PSConfig.exe -cmd upgrade -inplace b2b -wait -force (of course sequentially on all servers). There were some errors in the upgrade log regarding some missing features of old custom solution fragments in some content databases but despite of that everything
seemed to be fine.
Then, the next day, starting at 7:15 am some servers (not all) became almost unresponsive and were writing tons of ULSLog entries with category "Upgrade", obviously in DEBUG mode. Logs started growing up to 500M, in "normal"
mode they were about 35M. See followling ULSLog fragments to get an example. 
http://1drv.ms/1wpfdJX
 I really don't know how to handle this. A restart of the "faulty" server helped to get back in "normal" operations mode. In addition
stsadm -o localupgradestatus said that there actually is nothing to upgrade any more.
[4] content database(s) encountered.
[0] content database(s) still need upgrade or cannot be upgraded.
[343] site collection(s) are contained in the content databases.
[0] site collection(s) still need upgrade.
[37] other objects encountered, [0] of them still need upgrade or cannot be upgraded.
Any ideas and help are appreciated.
Michael

Hi Anil!
Nice to see we're actually colleagues (me = T-Systems Germany) :)
However, let's get back to the problem. As I wrote about the localupradestatus, there are not sites that still needs upgrade. Again:
[20] content database(s) encountered.
[0] content database(s) still need upgrade or cannot be upgraded.
[497] site collection(s) are contained in the content databases.
[0] site collection(s) still need upgrade.
[38] other objects encountered, [0] of them still need upgrade or cannot be upgraded.
So, I don't know, why one server runs wild every morning and tries to upgrade where nothing is to upgrade anymore. This still occurs, this morning the other WFE had these issues...
Michael

Similar Messages

  • Urgent help. I have upgraded my phone but every few hours the apple appears and stays for 15 min an hour or more?

    Urgent help. I have upgraded my phone but every few hours the apple appears and stays for 15 min an hour or more?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue persists, take the device to Apple for evaluation.

  • I upgraded to ios 7.1 and even after i updated to this version in the calendar view i could get a list of all of appointments and now i have half screen of calendar and then appointments is their any way to go full screen of appointmetns

    I upgraded to ios 7.1 and even after i updated to this new version in the calendar view i could get a list of all appointments and now i have done something and i get a half scrren of calendar and half screen of appointments.  is their anyway to get full screen of appointments with the 7.1 version

    Tap on any give date in the monthly view and you will be taken a list of event, the default position being the date you tapped.
    The icon just to the left of the search icon provides a master list view of events.
    http://help.apple.com/iphone/7/#/iph3d110f84

  • Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

    s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
    Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

    This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
    Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
    http://www.apple.com/batteries/iphone.html

  • After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video c

    After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video content wether its from Netflix or streaming from my iTunes library

    You might try restarting the Apple TV by removing ALL the cables for a 30 seconds. If that doesn't help try using another HDMI cable.

  • My iMac only starts in safe mode few hours after upgrade to 10.7.3

    After I updated to 10.7.3 on my iMac everything looked fine, but after few hours of activity everything except mouse cursor froze in a fullscreen app. No keyboard shortcut was able to force quit the app and only way was to turn the iMac off with power button. After restart login screen appeared and after I logged in the system froze while after the Skype started and I wrote few letters in a chat there. Again only power button worked, but this time I didn't even get the login screen, everything froze on the grey screen.
    I searched web on mac book and found info about problems with update and solution via installing comboupdate. I managed to start in safe mode and installed the combo update. After installation system started and all worked fine few hours until screen froze again, the picture gor a bit corrupted (some "empty" squares appeared) and I had to use power button again.
    Since that time my only way to get to login screen is safe mode (holding shift after restart), next reinstal of combo update didn't help. New install of lion runs correctly the part of instalation in the safe mode, than it restarts after while computer restarts and installation progress is shown, however the progress freezes nearly imediatelly and nothing happens for next hour.
    If I boot from recovery partition it starts after relatively long time the system utility, but even here interaction is wrong as after every click I have to wait few minutes until something happens, so I was not able to really start some action there.
    I can only take the iMac to sevis (sadly the 1 year warranty over) on monday so any suggestions what I could try till then to make it working again are very welcome.

    So the result form Apple authorized servis was that both motherboard and graphic card need to be replaced (cost aproximatelly 1100$) and in addition they said there will still remain some problem with display which would cost additional 500$ to fix. Taken in account that there would be only 90 days warranty on new parts I decided to give up with the iMac. Very disappointing after only 1,5 year on machine that costed more than 2000$.
    Recommendation from me after this experience - buy 3 years warranty if possible. I am personally very much looking forward for Mac Pro refresh. I don't want to be again in situation that if something breaks in my working machine I have no chance to replace it myself and can only expect very high repair costs. Untill new Mac Pros are out I'll suffer working on Mac Book Pro.

  • WRV210 Trouble a few hours after newly installed

    Hello There,
    I just bought myself a new WRV210. I installed it using the provided CD, set up my wireless network using WPA2 etc etc and all was working fine. I left home and came back a few hours later to find my main wired PC with local only. I went through the usual flow of resetting cable modem, router, cables etc with no result. Connected the cable modem directly to my PC and internet worked fine then but via the Router, local only on all PCs.
    I try to access 192.168.1.1 and now it just gives me "The Page Cannot be Found". After a few resets (30 seconds holding the button, disconnecting and reconnecting) I maganed to get my laptop via Wireless working at least on the Internetbut no other devices, wired or wireless work and I still can't acces the Router Control Panel. I have also after each reset configured the router via the installation CD and it succesfully communicates with the router as it lets me enter SSID, WPA2 password and the rest of the options you can configure via the CD but nothing at all on 192.168.1.1. I am so frustrated as I bought this router to replace a damaged Netgear one with the hopes of having wireless at home again and now this happens, just very dissapointing.

    Hello,
    Ok, tried obviously to access the router via a wired connection, actually on two wired PCs and then my laptop, no avail. I have checked the IP for the laptop and it shows a valid IP but not the rest of the devices. When I ping the router address (192.168.1.1) it does communicate with it, on any PC, succesfully, which is the case if I insert the CD, it will allow me to login to it, change the SSID and apply the password via the utility. I have also checked the lights and I get, the Power on solid green, DMZ off, Internet blinking green as for the wireless with blinking green and then 1 & 2 on the Ethernet as these are my wired PCs on it.
    Thanks!

  • Satellite E45t won't start for few hours after shut down

    I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble. 
    Please help.

    Hello,
    I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly"  and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle. 
    This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2.  I also have disabled rapid start, etc after the problem began.
    I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
    Thanks!!

  • My iBook keeps restarting every few hours after installing ZD WLan Utility

    i recently instaled the ZD WLan wireless utility because i got a Belkin f5d7050 usb wireless adapter, now every few hours mac needs to reboot. after it reboots though it gives me the message that it had to shut down unexpectedly (because it told me to hold the power button) i thought i could find out whats wrong by clicking on the Report button and going through the report log, but it never opens. What do i do? this is really frustrating and interrupts my work.

    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000001B8C000 PC=0x00000000000AC8F8
    Latest crash info for cpu 0:
    Exception state (sv=0x1DB17500)
    PC=0x000AC8F8; MSR=0x00009030; DAR=0x01B8C000; DSISR=0x40000000; LR=0x0027B398; R1=0x0A2E39D0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0027B334 0x007B77DC 0x007B3BA8 0x00452E90 0x00473274 0x00474680
    0x00474338 0x004756E0 0x00475A14 0x002D0B94 0x002CFA5C 0x000A9314
    Kernel loadable modules in backtrace (with dependencies):
    com.ZyDAS.driver.ZD1211RevB(4.5.7d0)@0x7b2000
    dependency: com.apple.iokit.IOUSBFamily(2.5.6)@0x450000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x5a9000
    com.apple.driver.AppleUSBOHCI(2.5.5)@0x471000
    dependency: com.apple.iokit.IOUSBFamily(2.5.6)@0x450000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x43e000
    com.apple.iokit.IOUSBFamily(2.5.6)@0x450000
    Proceeding back via exception chain:
    Exception state (sv=0x1DB17500)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x1D43E280)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    i hope trhats the right stuff, it is the last unresolved kernel

  • My iphone 4s battery dies after a few hours after upgrading the software

    My iphone battery dies after approximately 4 hours (with no use) after I upgraded to ios6 and, the phone heats up. This has been going on for about a month now and I've tried everything. Unfortunately, employees at the Apple store flat out refused to help noting, 'oh, just try restarting it, ios 6 doesn't have any flaws' (I've tried multiple times). Needless to say, 4 hours is not enough to warrant keeping a phone so if anyone has any (free) ideas, I would appreciate them greately. Thank you.

    Any ideas on what I can do?

  • Macbook pro very slow few weeks after Mavericks update

    Hi,
    Please I am in need of assistance. I have noticed some significant performance degradation after my OS upgrade. Slower system, spinning wheels, hanging and once crashing and restarting. I used to be able to run many apps simultaneously while zipping along. These days not so much.
    I have run an etrecheck (following the example found in some other discussions). Please see output below. Any suggestions or advise is very welcome:
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 512 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              HWNetMgr - Path: /Library/StartupItems/HWNetMgr
              HWPortDetect - Path: /Library/StartupItems/HWPortDetect
              StartOuc - Path: /Library/StartupItems/StartOuc
    System Software:
              OS X 10.9 (13A603) - Uptime: 1 day 22:38:3
    Disk Information:
              ST9500420AS disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        MAC HD (disk0s2) /: 499.25 GB (62.31 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5970H 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. FaceTime HD Camera (Built-in)
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.74)
              com.rim.driver.BlackBerryUSBDriverVSP          (0.0.74)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [loaded] com.barebones.authd.plist
              [loaded] com.edb.launchd.apache.plist
              [loaded] com.edb.launchd.postgresql-9.2.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.realvnc.vncserver.plist
              [loaded] com.rim.BBDaemon.plist
              [not loaded] com.teamviewer.teamviewer_service.plist
              [loaded] PPPMonitord.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [failed] com.adobe.CS5ServiceManager.plist
              [loaded] com.realvnc.vncserver.peruser.plist
              [not loaded] com.realvnc.vncserver.prelogin.plist
              [loaded] com.rim.BBAlbumArtCacher.plist
              [loaded] com.rim.BBLaunchAgent.plist
              [not loaded] com.teamviewer.teamviewer.plist
              [not loaded] com.teamviewer.teamviewer_desktop.plist
              [loaded] Swapper.plist
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
    User Login Items:
              KiesAgent
              iTunesHelper
              Google Chrome
              Dropbox
              Caffeine
              GetBackupAgent
              Clickfree BackupLink
              CFAgent
    3rd Party Preference Panes:
              Flash Player
              Growl
              Java
              MacFUSE
              NTFS-3G
    Internet Plug-ins:
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
    User Internet Plug-ins:
              RealPlayer Plugin.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        MAC HD: Disk size: 499.25 GB Disk used: 436.94 GB
              Destinations:
                        TimeMachine Backups [Local] (Last used)
                        Total size: Zero KB
                        Total number of backups: (null)
                        Size of backup disk: Too small
                                  Backup size Zero KB < (Disk used 436.94 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  58%          Google Chrome
                  22%          WindowServer
                   6%          CalendarAgent
                   5%          Dropbox
                   4%          Opera
                   3%          hidd
                   3%          sysmond
                   3%          EtreCheck
                   2%          Activity Monitor
                   2%          Clickfree BackupLink
    Top Processes by Memory:
              590 MB             Opera
              246 MB             Google Chrome
              115 MB             mds_stores
              90 MB              WindowServer
              74 MB              Dropbox
              74 MB              Evernote
              66 MB              Dock
              66 MB              Finder
              57 MB              Adium
              49 MB              com.apple.IconServicesAgent
    Virtual Memory Statistics:
              209 MB             Free RAM
              3.55 GB            Active RAM
              1.98 GB            Inactive RAM
              1.48 GB            Wired RAM
              9.05 GB            Page-ins
              104 MB             Page-outs

    15” MBP Mid 2010 models have been recalled for GPU issues.  See https://discussions.apple.com/docs/DOC-5681.
    Official Apple statement: http://support.apple.com/kb/TS4088
    Print out a copy of your kernel panic and a copy of this Knowledge Base article and go to an Apple store or Apple Authorizes Service Provider with your machine and the documentation.
    Genius reservation http://www.apple.com/retail/geniusbar/ .
    or find an Apple Authorized Service Provider https://locate.apple.com/country
    If it has been three years since your date of purchase then you are past the date covered by the recall but sometimes they honor it anyway.
    More on this from another thread:  https://discussions.apple.com/thread/5763560?tstart=0

  • In the short time I have had this phone there have been three occurrences where the phone will not receive calls or SMS (the screen shows full carrier signal). This usually lasts a few hours after which you get a whole lot of missed call SMS from the carr

    If I notice this problem (eg. someone calls me on another phone) and I make a call from my phone to someone else (which DOES work) then all the missed calls and SMS will come through. Almost as if the phone put the cellular radio to sleep and only wakes it up when I try to make a call.
    I havent called Apple support yet, thought I would see if anyone else was having similar problems with their 5 (or maybe IOS6).

    Bring your phone into Apple for evaluation

  • Few issues after recent updates

    I updated my system day before yesterday and after booting I noticed that the last update didn't go smoothly.
    My current setup is Arch stable on Thinkpad X201 on a docking station with external monitor with 1920x1200 resolution.
    Issues I have noticed are following:
    The console framebuffer seems to limit itself on only part of my screen, perhaps 1024x768 or something like that. The picture is aligned to top-left corner.
    When I started StumpWM for the first time the whole X was using 800x600 resolution or similar, using xrandr I could select the 1920x1200 resolution but the StumpWM itself only seemed to use the same portion of the screen as the console framebuffer.
    I then edited my xorg.conf and removed all 'non-essential' stuff from it and added "Modes '1920x1200'" to Screens section to get correct resolution when starting X but StumpWM still only use the smaller part of screen.
    I then switched to Fluxbox which seems to work with correct resolution. It still has problem in Firefox. The firefox address bars list of addresses is aligned to screens left side instead of being just below the address bar.
    Then I noticed that my keyboard won't work correctly. Prior to update I could use my keyboards fn+key combo but now it doesn't work. I use Happy Hacking Keyboard Pro 2.
    Any idea how to get my keyboard and stumpwm to work again? StumpWM might be WM issue but it is pretty odd still.
    Keyboard issue is more pressing as I can't type umlauted chars with it.
    Last edited by Zmyrgel (2010-06-23 06:56:52)

    Got the keyboard issue fixed. Apparently the xmodmap file I've been using won't work with the new xorg.
    Still need to find why the console and stumpwm is working incorrectly.

  • HT1766 i have been trying to update my wifes iphone 4 for a few hours now. the update it fine i cant seem to get the phnoe off the the et up phone sceen! help

    ok my last back up was on itunes @3 :22 now its connected with itunes but i cant get the phone back to making call yet why?

    Why not?
    What is displaying on the screen?

  • Youtube App has (a few) bugs after firware update on 46TL933G

    After a video is finished and the next video on the playlist starts, the next video has a black screen. Sound is working, the control bar is working, I can press the back button to go to the menu. However, every video from now on until the restart of the app has a black screen.
    If I go to the next video before a video ends, the next video is shown normally.
    System-Information:
    6.9.JD.1 Jan 18 2013 - 74.8.30.4
    MBOOT Version: 00545609
    MFC Version: 246009
    I already tried to reset the TV settings. I assume this is a programming error.
    Message was edited by: mars199

    As I already wrote in the posting on the top: "I already tried to reset the TV settings"
    I did it several times. I don't have any saved channels, since I only use the TV for Youtube and DVDs. Therefore YouTube not working properly is really annoying.
    I better describe the error again, since understanding my initial post obviously is hard: The YouTube App works. I can watch videos. Only not to the end! Otherwise the screen goes black (with the menu still working).

Maybe you are looking for