Tonspur asynchron - premiere photoshop bridge cs6

Hallo,
ich habe folgendes problem. mein clip, der am anfang 10 sek. stumm ist, wird in premiere cs6 (auch in photoshop und bridge) asynchron - der stumme part der tonspur wird einfach abgeschnitten und die restliche spur wird nach vorne gesetzt. in vlc und quicktime besteht das problem nicht.
wäre sehr dankbar für eine lösung des problems

dokumenttyp: Quicktime-Video also .mov
Stream 0
Typ: Video
Codec: H264 - MPEG-4 AVC (part10)(avc1)
Sprache: Englisch
Aufläsung: 1920x1080
Bildwiederholungsrate: 25
Decodiertes Format: Planar 4:2:0 yuv full scale
Stream 1
Typ: Audio
Codec: PCM s24 le (42ni)
Sprache: Englisch
Kanäle: Mono
Abtastrate: 48000 Hz
Bits pro Sample: 32
das komische ist: bei einem freund von mir geht alles wunderbar in premiere pro - nur bei mir geht es nicht - habe das ganze auch schon auf einem mac ausprobiert - da ging es auch nicht. ein mysterium!!
falls noch angaben zum clip benötigt werden poste ich sie gerne.

Similar Messages

Rating and labelling images is not working in Photoshop Bridge CS6. The Rating and Label headings in the Label menu are greyed out. Any ideas for correcting this would be appreciated.

Any suggestions for restoring the Rating and Label options in Photoshop Bridge CS6 would be appreciated.

Please post Bridge related queries over at
http://forums.adobe.com/community/bridge
Maybe it’s permissions issue … what volume are the files on?

I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files

I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
Any insight/wisdom would be much appreciated. Thanks

When you try to open in PS what happens?
In Bridge do you see icons or thumbnails?
Will it open in ACR in Bridge?

Finally installed Adobe Photoshop Bridge CS6

I Finally installed Adobe Photoshop Bridge CS6 after 7 attempts and 3 appeals to Adobe support.
Adobe technical support was not helpful and I had to solve the problem myself.
The problem was that when installing Photoshop CS6 the Adobe Bridge component would not install. This was because our corporate McAfee "virus scan enterprise 8.7.0i" was preventing the Adobe installer from changing or writing to the AutoRun.INF file in C:\Program Files (x86)\Common Files\Adobe\Bridge CS6 Extensions\Adobe Output Module\mediagallery\resources\flashgallery\AUTORU.inf.
Once I disabled McAfee I was able to install all of the software. I am now able to run Adobe Bridge.
Our corporate version of McAfee has not pteviousaly created a problem with software installations.
Problem solved with no help whatsoever from Adobe

Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

Photoshop / Bridge CS6 does not open the selected image thumbnails.

Hello,
When I open an image with the "Open Camera Raw" in Adobe Bridge CS6, I get the error:
"Bridge's parent apllication is not active.
Bridge requires que qualifiying the product has been launched at least once to enable this feature."
My OS is Windows Vista with all automatic updates.
Grateful for any help.
Aurélio

When you remove the obvious,
that which is left must therefore be the truth -- Sherlock Holmes
Short version:
When I created a new lightroom catalog, and imported a single, standalone file, It worked fine. But when I imported to the new catalog, any photos from my existing catalog, it would fail.
Turns out that I was doing something a bit out of the ordinary with the IPTC Copyright field. In order to make my copyright information look "different" when I would export a file.
One would normally put in that field something like "© 2009 someone". I discovered a few months ago that I could make this field display as a multi line entry.
ie.
if you wanted to put XY into the copyright field, but wanted it to display as:
X
Y
all you would have to do is to put a carrage return between the two characters. (hint ctl^enter). Now when you displayed the "copyright" in an output file, it will display
vertically instead of all the characters in a horizontal line.
After being frustrated by this for a couple of weeks, I simply started removing every option that I might have applied to photographs that I would import with Lightroom. One of the last ones was the "vertical" information I put in the copyright field in a Preset. (when you remove the obvious...).
Funny thing is that no program really cares about the formatting of that field, or if it has multiple lines in the data, or special characters.......It even opens up just fine in Photoshop / Gimp / PSE / etc. with no problems.
But, if you have multiple lines of data in the Copyright Field (and I suspect others as well),
AND you want to open up the file from Lightroom in Photoshop, using the standard menu item of " Edit with Photoshop CS4", for some reason Photoshop will start, but never open the designated file. I would expect some parsing something just giving up after it encounters a CR.
But.....All is well that ends well. Now I can quit obsessing, and move on to something else...
Best,
Jim

.mov won't play in quicktime after previewing in photoshop bridge cs6, what do I do to fix?

I have a iMac, OS X 10.8.5, 2.7 GHz Intel Core i5.
I don't like how iphoto organizes my files so have been organizing my photos and videos from my iphone into folders after exporting them from iphoto.
These are the steps I believe I took in regards to my "corrupted" .mov file:
-imported into iphoto
-exported originals from iphoto
-re-organized photos and videos using adobe bridge CS6
-tried to open my .mov from bridge (default is to open in quicktime), I'm getting a small black quicktime box (as compared to a large window where the file will play), but video will not play.
-video will play inside of bridge preview window but file will not play in quicktime.
HOW DO I GET MY FILE TO PLAY IN QUICKTIME?
DID I MISS A HIDDEN FILE WHEN MANUALLY MOVING THE FILES IN BRIDGE?
I no longer use this process.
I am using image capture to import and then organizing from there.
I don't believe I have an issue with my .mov files anymore.
This seems like something caused by iphoto. ????

Upon further research, I found that a certain QT plug-in is required to use XDCAM EX footage in Final Cut Express, which can be found on this website:
http://www.calibratedsoftware.com/QXD.asp
I downloaded the demo, but have no idea how to use it to convert my files so FCE will accept it. Is anyone familiar with this plug-in and what to do once it is downloaded?

Photoshop/Bridge - CS6, prevents deleting files.

What is causing this?
Photoshop/Bridge prevents deleting files. After I'm done with a job I store it on the server then try to delete the folder or files I've finished from my desktop.
No can do.
I found I have to shut down Photoshop and Bridge then I can move the stuff into trash.
Real PITA
What causing this & what's the solution (if any)?
cvt

Photoshop doesn't keep files open after saving. Bridge might have a bug, or you may be using a third party plugin with a bug (certain font managers have had problems like this).

Photoshop Bridge CS6 is not operating properly after most recent update to Photoshop CS6.

I updated Photoshop CS6 (through Adobe Creative Cloud) a few days ago. Since the update, Bridge does not show changes in the images when viewing the thumbnails. Opening in Camera Raw does show the changes. But this outcome negates the purpose of Bridge. I want to see the changes made (to the Camera Raw files) in the "filmstrip" thumbnails without having to open each file individually.
Other problems exist. The icons for rotating the images are grayed-out. Even worse, the vertically oriented images are shown as being horizontally-oriented.
Can anyone offer help on this problem?
Thanks
Jim H.

I am on the Adobe Download Assistant. It was stuck at "less than a minute" for an hour and a half, showing that the installation was basically done, since the installation bar was full. But it was stuck. Now it has stopped all together, and is restarting the download from scratch.
Apparently it does not save the download, or only saves a small portion.
c:\adobe/CS6MasterCollection/MasterCollection_CS6_LS16.7z.adadownload
It is at 85.6 MB, even though a short time ago it was close to 99.9% done with the 6,352 MB download.
My internet connection is fine, all is working, and I am able to browse, etc.
I have been careful to keep activity minimal on the computer, so as to avoid conflicts.
The conflicts are with the Adobe Download Assistant.
I amabout ready to just give up, and look for alternatives.
Please help.

Photoshop/Bridge CS6 Could not build preview because of a disk error: Mac10.8.2

The crashes always occur while editing a photo in the Camera Raw editor in Bridge (most of the time they are JPG files, yes you can edit JPGS in the Adobe Camera Raw editor) and then hit the "Open Image" button that will open the image in Photoshop. That's when things lock up. Often Bridge, Photoshop and InDesign all are "not responding" and have to be force quit.
Always when I'm editing a photo in Photoshop that is on a server I get the " Could not create a preview because of a disk error message" which I have to hit the OK button to clear. I just tested this several times and I never get the disk error message when editing an image from my hard drive. I suspect there is a network communication problem.
MacBook Pro 15" Early 2011
2.2 GHz Intel Core i7
8GB 1333 Mhz DDR3 RAM
AMD Radeon HD 6750M 1024 MB
OS 10.8.2 (12c60)

I am having the same problem. I work off of a server too and I get the "Could not create preview because of a disk error" message too. The actual preview itself is there once I hit OK but this is so annoying because it keeps me from batch processing images. The message comes up for each image you try to save out so you have to set there and hit enter between each image when you run an action. Any help to correct this error would be greatly appreciated! Thanks.

I cant open Camera Raw in Bridge cs6 - MAC

Hello - I'm using a Mac and use photoshop/bridge CS6. Today as i opened bridge to batch edit photos in camera raw, the "open in camera raw" option was not available to click on. It worked perfectly yesterday and now today it's not. Is there a way to fix this? help!!

You mean, you right-click a RAW file in Bridge and want to select "Open in Camera Raw" and this is not available?
Then you need to perhaps reinstall ACR.

Bridge CS6 doesn't allow access to many of my folders on iMac

iMac with OS X 10.8.2 and Photoshop & Bridge CS6 and Lightroom 4.
When try and access photos via Bridge most of my folders have a little red circle with a minus inside, denying me access to the folders.
However, if I use mini Bridge in PS I can access all of my folders.

moved from sharing and storage forum to photoshop

Bridge CS6 fichier M2T et MPEG

Bonjour
Je n'arrive pas a lire mes fichier video M2T et MPEG (numerisé dans premiere) dans Bridge CS6
alors que cela fonctionne tres bien dans Bridge CS5.1
Merci de me donner la marche a suivre pour pouvoir utiliser Bridge CS6 correctement avec des fichier video de ce type.
Je trouve etonnant qu'Adobe n'est pas verifier ce genre de Bug avant de lancer ca nouvelle version
cordialement

Used Google translator and may loose something in translation.
Your M2T MPEG is that what I might call mpeg2? If so it should work fine.
Click on edit/preferences/file type associations and see it you have proper program set to open this file by default.

Photoshop and Illustrator batch commands missing in Bridge CS6

Photoshop and Illustrator commands missing (eg batch and Live Trace) in Bridge CS6 tools, but they are there in CS5.
Any thoughts
much appreciated regards
Tim

So I deleted/uninstalled all versions of bridge then photoshop, but Bridge would not even install with PS cs5 (maybe it never did, there was no option on install).
In the CS4 suite there was a separate option to install or uninstall Bridge, for CS5 they changed this as combined install with PS.
There are many options for buying separate applications or combinations (Suite) of Adobe Products but according to the Adobe Site Bridge is delivered also with the separate applications Indesign, Illustrator, Flash, Premiere Pro, After Effects and Incopy.
Usually when having a complete Suite it is delivered with one of those applications.
Bridge should be able to communicate with all applications from the same CS version, but uses start up scripts for that applications.
When doing normal installation those scripts should be placed in the correct location automatically.
Having different suite versions on your system it will not be easy to make them communicate with each other through one version of Bridge (sadly enough you can also have only one version of Bridge active at the time and different versions of Bridge use different cache folders).
Don't have experience with scripting but maybe the dedicated Bridge scripting forum (link in previous post) can help you out for the answer of customized start up scripts or if it is possible at all.

Offline photoshop, bridge & premiere pro

Hi. Where i work we do not have to posibilities to connect our computers to internet, therefore Adobe CC will be useless for us.
Is Adobe Creative Suite still excisting? We need an offline version of especially photoshop, bridge & premiere pro. We have a few licenses on old computers, but we need it on a few more. Please, we are deperate!

https://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_ creativesuite6.html?start=10
Mylenium

Adobe Bridge CS6 stalls in Photoshop...

I downloaded CS6 Design Standard from Adobe webpage and have tried several times to get mini bridge/bridge to run, but the message 'Waiting for Bridge CS6' runs for hours. I am using a 64-bit Dell desktop with Windows 7 Home Premium. I have tried option 4 on Error: Waiting for Bridge | Mini Bridge panel, but nothing changes on deleting the Switchboard from the registry. Some folks here have suggested looking up bridge.exe in the Task Manager, but my task manager doesn't even show it up.
I would appreciate help, and soon.

rekha_dev_sharma wrote:
If the software installed I would expect it to work…
Well… that's your expectation. Did you pay for the download? During the first 30 days you'd be entitled to your money back, but it's been a heck of a lot longer since Adobe demanded or accepted any mnoney for "CS6 Design Standard". If you just recently acquired that obsolete suite, it was certainly not through a legal purchase from the Adobe store.
rekha_dev_sharma wrote:
…What is a 'newer version of Photoshop'?…
E.g.: Photoshop CC2014 15.2.2.
rekha_dev_sharma wrote:
…So, can you answer why it seems to be launching but no jpg come up?
I haven't got a clue what you mean by that nonsensical grammatical construction, nor does that question seem to have anything to do with your original post. ??? ?? ?
Also, please remember you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

Tonspur asynchron - premiere photoshop bridge cs6

Similar Messages

Maybe you are looking for