Too late for this to be on the Blackberry Playbook new OS 2??

Will we be able to find our Blackberry phones (if they get misplaced or lost) using the Blackberry PROTECT program on the Blackberry Playbook? With all of the excitement in the air for the anticipation of the new OS 2...I was wondering if the possibility for that useful program will be available as an app for the Playbook?
Also...(Just to get a little bit more greedy on the thought)...will we be able to locate our Playbooks using the same program with the help of our laptops or desktop computers, or Blackberry phones?
Thanks.
Solved!
Go to Solution.

Fascade518 wrote:
Yes, it works with the phones...from a computer of laptop...but in using the BLACKBERRY PLAYBOOK...if I lose my phone...can I find it with the Blackberry PLAYBOOK...instead of a laptop of desk top or somone else's computer?
In other words...is there an app for the Blackberry Playbook to find my phone?
That is exactly what I am saying, you do not need any apps, with the Playbook, just use the browser and go to the Blackberry Protect web site and you can do the same thing as if you are using a computer (laptop or desktop), so why bother with an app when you can already do it using what is on the Playbook
BTW. I am doing that since day one on the 19 April 2011, I even can use the Blackberry Travel web site
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Similar Messages

  • Too late for this user?

    Hi,
    in filr1_admin.pdf, page 34, it's mentionned that if a user logs in before his net folder Proxy info is set up, "the Home directories are not created correctly...". So, what can be done in this case (apart from reinstalling Filr)?
    I have (at least) one user in this situation. I am not allowed to delete this entry via the Filr console. Synchronizing LDAP won't help.
    Thanks,
    Marc Delisle

    lem9 wrote:
    > in filr1_admin.pdf, page 34, it's mentionned that if a user logs in
    > before his net folder Proxy info is set up, "the Home directories are
    > not created correctly...". So, what can be done in this case (apart
    > from reinstalling Filr)?
    >
    > I have (at least) one user in this situation. I am not allowed to
    > delete this entry via the Filr console. Synchronizing LDAP won't help.
    When you say you aren't allowed to delete this user via the Filr
    console, do you mean that you get some sort of error or something? Or
    do you mean your organization's policies simply prohibit you from doing
    this?
    Your world is on the move. http://www.novell.com/mobility/
    We know what your world looks like. http://www.novell.com/yourworld/

  • There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

    There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number.  Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction  there is a tones problems in the system.  And this Will cause undirect problem for the iPhone 6

    There is no apple here in this user to user technical forum.
    Do this Use iTunes to restore your iOS device to factory settings

  • The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade

    Hi Guru,
    I' am doing prepare : upgrade from R/3 entrerprise 47X100 to ECC6.0 SR3.
    PREPARE
    02)                       Initialization     failed        yes
    the checks.log report the following error :
    SAPup> WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this
    upgrade (> 2005_1_700).
                    To avoid loss of data it is necessary to include the latest avai
    lable version for the Add-on
                    in the IS_SELECT phase.
                    Please refer to Add-on note 69455 for further information.
    I can't go on , How can I include the add-on in the upgrade ? the phase for include the add-on upgrade is  04) Extension   but  i cannot skip phase 2    ? ! ? !
    OSS note 69455 does not contain valid information.
    thank's for the answer.
    Regards Antonio.

    Hi
    I got the same error and it actually prevents from getting further, because its treated as an error.
    "ERROR: To be able to use ASU Toolbox, your system requires at
           least Support Package Level 8 for the ST-PI software component
           For more information, see the upgrade documentation
    WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade (> 2005_1_700).
             To avoid loss of data it is necessary to include the latest available version for the Add-on
             in the IS_SELECT phase.
             Please refer to Add-on note 69455 for further information."
    2008_1_620 does not have a level 8, so it must be refering to the 2005 version of ST-PI.
    Update SAPup.exe (in <upgrade dir>/bin) to newest version.
    Regards
    Kim
    Edited by: Kim Hynek on Mar 30, 2010 11:36 AM
    Edited by: Kim Hynek on Mar 30, 2010 11:40 AM

  • What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved., What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved.

    What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved., What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved.

    Hi Tmswrite,
    Here is what you want to do to protect yourself and your device:
    Find My iPhone Basics  - Apple Support
    iCloud: Find My iPhone overview
    Here's some information on how the Activation Lock protects you:
    Find My iPhone Activation Lock in iOS 7
    Sorry for your troubles. Hope it turns out OK for you!
    GB

  • Too Late for Mac OS Extended Journaled??

    Hi guys! So i got a another firewire HD, 250GB by acomdata. It's formatted under FAT 32 for both windows and mac, after after reading several posts, it's best to format it under mac os extended. the problem is I already put about 30 GB of files on it. Is it too late for me to reformat it? do i have to remove all the files, then do it? If someone can provide step by step instructions that won't harm my files, I'd greatly appreciate it. Thanks!

    You understand that if you reformat the drive for Mac OS Extended that you will no longer be able to use the drive on a PC?
    If you do reformat the drive you need to do so as follows:
    1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
    1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

  • I accidentally deleted part of an iphone (4s) note. Is there a way to restore the deleted text? I learned too late about being able to shake the iphone in order to undo my action, so is there any other way?

    I accidentally deleted part of an iphone (4s) note. Is there a way to restore the deleted text? I learned too late about being able to shake the iphone in order to undo my action, so is there any other way?

    Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
    You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is  part of the backup.
    More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
    Not being able to fill in the passcode is not much different from forgetting it.
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Also have a look at this one: iTunes: About iOS backups

  • Paging file is too small for this operation to complete.

    iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

    Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

  • Host Agent Service critical - Paging file is too small for this operation to complete

    Hi all,
    at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
    The error details in VMM are:
    Error (2912)
    An internal error has occurred trying to contact the hostname server: : .
    WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
    The paging file is too small for this operation to complete (0x800705AF)
    Recommended Action
    Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
    and running.
    On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
    The paging file is set to 4GB and the OS is Server 2012.
    The hosts have 192GB of RAM.
    The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
    I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
    Thanks,
    Patrick

    The hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
    An additional problem with VDS was detected and the following hotfix was installed:
    http://support.microsoft.com/kb/2884597/en-us
    Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
    Nevertheless one WMI Instance is still growing...
    We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it.

  • HELP! Can I retrieve my previous session? I only just ticked the "open with previous session" preference but it seems too late! Can I still get the old pages/tabs I had open?

    HELP! Can I retrieve my previous session? I only just ticked the "open with previous session" preference but it seems too late! Can I still get the old pages/tabs I had open?

    That could be a problem, unfortunately.
    But most likely the pages you were on are stored in the History list. Try pressing Cmd+Shift+H to get the History window.
    To help prevent this from happening to you again in the future, I can recommend the extension [https://addons.mozilla.org/en-US/firefox/addon/2324/ Session Manager]. It is quite powerful but may not be able to help you any more than the History at this point.
    Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help more users with similar problems.

  • Message too large for this organization.

    Ok this is driving me a little crazy.
    Organization Configuration -> Hub transport -> Global Settings -> Transport Settings -> Maximum Receive is set for 26MB (26624KB)
    Organization Configuration -> Hub transport -> Global Settings -> Transport Settings -> Maximum send is set for 20MB (21480KB)
    All  Receive connectors are set for 26MB
    Recipient User is unlimited.
    I am still getting the below error on an inbound from the internet message just under the 26MB limit
    RecipientStatus        
    : {550 5.2.3 RESOLVER.RST.SendSizeLimit.Org; message too large for this organization}
    TotalBytes             
    : 26325981

    Hi,
    I noticed that the error "550 5.2.3 RESOLVER.RST.SendSizeLimit.Org; message too large for this organization" is related to SendSizeLimit. Please change the Maximum send value to 26MB and check whether the issue persists.
    Organization Configuration -> Hub transport -> Global Settings -> Transport Settings ->
    Maximum send is set for 26MB (26624KB)
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • I am too old for this

    I can't open a disk that has photos stored on it.  The error message is:"Invalid jpeg marker." Other disks work fine.

    The title of this post "I am too old for this" reminded me of someone that used to post to the Photoshop forum.
    Still around but under another name.
       "My user ID, Tai Lao, is just a phrase that means Too Old in Mandarin, and my signature, Wo Tai Lao Le, 我太老了, just reads I am Too Old in Mandarin too,"

  • Cpu is too old for this kernel

    I downloaded and burned Arch No Panic ISO before 5:00 am today, then I went to the train and started travelling to my parents, it took about 10 hours. Now I am in their house and I wanted to install brand fresh new Arch Linux on my old K6-2 500. All I saw (after many dots) was:
    cpu is too old for this kernel
    WHY????
    686 is not enough today? for installation?
    PS. could you recommend small distro with gcc and SDL and Mesa? Slackware? Ubuntu? OK, let's get serious, Slackware?

    I know k6-2 is an i586 family processor, but there are two problems, first the name, beacause of the 6 in k6, it can make suppose that k6 means i686. but the main problem is the fact that the official_Arch_Linux_Install_Guide at http://wiki.archlinux.org/index.php/Off … tall_Guide says something like this:
    Pre-Installation
    Arch Linux is optimized for the i686 processor and therefore will not run on any lower or incompatible generations of x86 CPUs (i386,i486,i586). A Pentium II or AMD K6-2 processor or higher is required. x86-64 architectures are also officially supported.
    "A Pentium II or AMD K6-2 processor or higher is required"
    now, there are two options: the official guide is wrong, or you would have to be able to install on a k6-2 microprocessor even if it is an i586 one. if is the secon opcion the question is "how?" because i thry to install arch on a k6-2 500mhz with the same result: "cpu is too old for this kernel"

  • SP2-0614:Server version too low for this feature

    Hi,
    In the preparation phase for Oracle 9i upgrade, (Step 3.7 - Oracle 9i-Unix upgrade Guide)
    we ran @CHECKS.SQL under /oracle/stage/920_64/Disk1/SAP directory
    received errors   SP2-0614:Server version too low for this feature
                            ORA-01034:ORACLE not available
    Source System: Oracle 8.1.7.4, Kernel 620, HP-UX 11.11 9000/800
    I went though Oracle site for this issue and it says, that we need go for patch to resolve this issue. But I am not sure, if this is needed or not. Shall I can continue upgrade without this patch?
    Please help me to resolve this issue.
    Thanks in advance
    Regards
    Srinivas

    what is parameter value for <compatible> in initSID.ora ?
    it should be set to 8.1.7.4

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

Maybe you are looking for