Too low ringtone n msg tone

hi
i recently bought nokia 3500 which is s40 3rd edition.... when i recieve a call or a msg the tone is very low... sumtimes itz really hard to hear it if ur standing in a place wid noises... so any1 can help me figure out how can i increase my tone level... i already set my tone volume to max n the ring style z "ringing"..
thx

Here's another suggestion -- MP3Gain
My comments on how to use it and where to find it are here: (link)
The instructions for using it to raise the volume are the same as the instructions posted there for using it to lower the volume.
One more thing.
At the top of screen, click on "Options" and you'll see this option:
"Don't clip when doing track gain"
When this is checked, MP3Gain will try to raise the volume as close as possible to the value you specified; but it will stop short of that value if that value will cause the ringtone to be distorted.
Omitting the checkmark will remove this restriction
Here is some advice on setting the clipping option I found:
http://forums.sonyinsider.com/topic/18810-mp3-gain/
"As [far as] setting the target, look at the clipping indicator (red "Y"). you want to target the highest number where the clipping is gone. I find the default 89 put the volume too low for my taste, but pretty much guarantee zero clipping. I find 90 or 91 is good enough in eliminating clipping most of the time."
If you want to apply MP3Gain to audio that you're going to use as music that you're going to listen to on your phone, here's advice on that matter:
http://forums.ilounge.com/digital-audio-formats/76598-mp3gain-usage-guide.html

Similar Messages

TXT MSG Alert ringtone too low....Pls Help

Hi
I recieved HTC trophy today and all my excitement was vanished when I found that the Alerts available on phone for text messages & Emails are too low.
I manage a Data Center and our Monitoring servers in Data center sends txt messages when anything goes wrong in Data Center.
With HTC trophy the alert ring tones are merely chimes and can hardly wake me up if any APP/Server goes down in DataCenter.
Is there any option available on Trophy to add ringtones for Alerts or use other ringtones already on the phone as TXT message alert?
This issue is a deal breaker for me. and any help in this regard would be highly appreciated.
Thanks

Hi ifi71:
It sounds like text messaging is an important feature to you, and you need it to be loud. If the native tones don't seem to work for you, you can download a ringtone management program from the Marketplace. There are several free ones to choose from. Once you get a better alert downloaded, just change the sound setting to ring with that new tone.
I hope that helps.
Regards,
MikeS_VZW
Follow us on Twitter @VZWSupport
It appears that I have provided incorrect information. The assumption that you can do this on Windows Mobile phones was incorrect. I had one in-hand and assumed that alerts could be downloaded like ringtones, but according to bc3tech , it's not possible. This is not customizable like on all other operating systems. If this is a deal breaker for you, perhaps another device would suit you best.
Message was edited by: MikeS_VZW

X 3 Ring tone volumn is too low

My X3 mobile ring tone volumn is too low. Give me soulution to increase volumn of Alaram.

azeerka wrote:
My X3 mobile ring tone volumn is too low. Give me soulution to increase volumn of Alaram.
Ringtone volume and Alarm volume are two separate things... You can set the Ringtone volume by.. Menu-->Settings-->Profile-->.. select the profile you want to use..-->Personalise-->Ringing Volume...
..whereas for Alarm volume there is no such setting as mentioned by rohitms2711 ..but the work-around is use a tone that is louder..you can download some good ones from
http://www.zedge.net/?updPhone=3441

Klingeltöne zu leise / ringtones too low

Nach einem Update in der vergangenen Woche sind die Klingeltöne auf meinem iPhone so leise, dass ich sie kaum noch höre und etliche Anrufe und Meldungen verpasse.
After an update last week all ringtones on my iPhone 4 are extremely low so I hardly hear them and miss lots of call and messages.
Inzwischen habe ich ca. fünf Stunden mit dem telefonischen Support verbracht. Die generelle Aussage war, dass es bisher noch nie ein vergleichbares Problem gegeben habe. Ich habe inzwischen herausgefunden, dass dieses Problem schon lange bekannt ist und ich bin deswegen sehr unzufrieden mit der Kundenbetreuung. Tatsächlich tauchen die Probleme regelmäßig bei Updates auf. Mit Google habe ich etliche Seiten zu diesem Thema gefunden.
Until now I have spent five hours talking with the apple customer support. The keep pretending that this issue has never occured before. I found out its a well known problem and I'm unsatisfied with the customer support. Actually this problems happen on any major update. I found some pages with google:
https://discussions.apple.com/message/23993906#23993906
https://discussions.apple.com/message/20847735#20847735
https://discussions.apple.com/thread/5376012?q=ring volume too low
https://discussions.apple.com/message/21348298#21348298
https://discussions.apple.com/message/23159600#23159600
https://discussions.apple.com/message/23174455#23174455
Dies sind Diskussionen auf der Apple-Community. Etliche andere Links sind auf externen User-Foren
This are just the discussons at the apple community. Lots of links could be found on user-portals.
http://forums.macrumors.com/showthread.php?t=1633989
http://forums.imore.com/iphone-4/256272-iphone-4-ringer-volume-really-low-all-su dden-volume-max.html
http://www.digitaltrends.com/mobile/ios-7-problems/3/#ringer
Ich kann mir kaum vorstellen, dass der Apple-Support von diesem Problem nichts weiß. Es scheint bei allen bisherigen Updates nach dem 4er iOS immer wieder dieses Problem gegeben zu haben - betroffen sind davon immer nur ein Teil der Modelle. Anhand der IMEI-Nummern sollte sich ermitteln lassen, wann und wo diese Geräte produziert worden sind.
I wouldn't believe the apple support does not know this problem.It seems like ALL iOS updates past iPhone 4 had this issue - only for some devices, not the whole model.It should be possible to track down by IMEI-Numbers, where and when the devices have been produced and what's the difference to iPhones which work ok.
Es sieht nicht so aus, als seien die Geräte defekt. Vielleicht unterscheiden sich die Modelle nur gering in der Hardware und werden in der Softwareentwicklung nicht berücksichtigt.
It doesn*t look like the devices are defective. I suspect minor differences in the hardware are not really considered in software development.
All I could say is 'Get thy work done!'

Nokia 3110 Classic Alarm tone too low

I brought a Nokia 3110 Classic yesterday and found the alarm tone too low. Tried chaging the Tones, but all of them are too low. Not enough to wake up. can anyone suggest how to overcome this problem.
Thanks

get a loud tone there is no volume level for this if your havin trouble i will post a good loud one most nokias now have incremental volume ie get louder the longer they ring but i have good loud one
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

E52 Speakerphone volume too low

Hello,
When using speakerphone on E52 sound volume is too low. Even if I keep it on max, it's still too low.
Considering that ringtones can be played with a lot stronger volume using the same speaker (as speakerphone does) - I assume there must be a "trick" to pump up the volume of speakerphone, right ?
Any code or workaround ??? This is somewhat silly situation, ringtones quite loud, speakerphone too low !
Thanks for help !
Somewhat similar report here:
E52 Firmware Thread
FW: 053.001, Model E52-1, Type: RM-469, Cst version date: 06-Jan-2011 (DE model).

Months later, can't find solution on web... anyone cares, hello Nokia ??
PS: On my second phone, which is samsung, I can tune all kind of volume parameters (around 50 params, db, tx,rx, etc..). Must be something on Nokia as well...

Every time I set up a stock personal ringtone or text tone it reverts back to the default, Why?

Every time I set up a stock personal ringtone or text tone it reverts back to the default, Why?

yes, i have the same issue too... is there a way to change your notification tone? the only way i kno to change tones is through settings->sounds....
is there another way thats conflicting with this menu's settings?

Transfering ringtones and notification tones from Z3 to another Z3?

Hello,
How to transfer ringtones and notification tones from my Z3 to my wife´s Z3? I tried to set both Z3´s together but nothing happens except odd sound. Yes, Bluetooth were on too - not only NFC - yep both phones...
Thanks :-)
Pingu

Hello,
I wish to transfer my iPhone m4r ringtones/notification tones/alarms to my new Xperia Z3 phone - so how to do this? I created those tones by Ringtonium app so those tones are not bought ones. Those files are on my Mac laptop. I tried to use Xperia Transfer Mobile to transfer those files but it didn´t accept. I could find them - even made a folder for those files but they just appered to be gray colored meaning that I can´t select them even I could see them :-(. If possible to transfer them somehow I would be very thankful - just wouldn´t like to make them once again as there are plenty of them....
Many thanks in advance for your help :-)
Pinguuu

Low Ringtone and notification volume

after installation of 10.3.1.1565, ringtone volume and notification is too low.
please help
thanks

hi
we reported this 3 weeks ago and are still waiting for a fix
look here http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=2C91D1A432834B2F4D143A5654B83034?...

Warning: PROCESSES may be too low for current load

Hello,
I have 64 bit centOS Server and have oracle 10g installed on it.
We have 8GB RAM and 64 bit Server but we were able to install oracle on 2GB SGA only.
From few days I am facing following error:
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=115, want 8 more but starting only 0 more
I have executed following commands:
ALTER SYSTEM SET max_shared_servers=200 SCOPE=MEMORY;
ALTER SYSTEM SET circuits=300 SCOPE=MEMORY;
But I am still getting the same error,and server average load goes too high and needs a oracle restart.
Please let me know in case any one has solution for this problem. Its urgent.
Thanks in Advance.

Sir ,
please see the output of the below query .
this error had found today early morning when rman backup get start .
SQL> show parameter process
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 10
log_archive_max_processes integer 2
processes integer 500
SQL> select count(*) from v$process;
COUNT(*)
93
SQL> select count(*) from v$session;
COUNT(*)
94
the error msg in the alert log file is
Warning: PROCESSES may be too low for current load
shared servers=1, want 1172 more but starting only 405 more
Edited by: user9353210 on Jan 4, 2011 9:30 PM

How to block an order if the price is too low?

Hello,
My problem is :
How to block an order if the price is too low?
I created a new type of condition ZMIN and an access by material.
When the net price is below the minimum price the system must position the order on incomplete document for error of price.
Thank you in advance.
Frédéric Blaise
e-Kenz S.A.

Hello,
you can enter a lower limit in the condition record:
Lower limit of the condition rate/amount
Indicates whether, during document processing, the system checks if manual changes fall short of the lower limit allowed for the corresponding condition record.
Use
When you maintain the scales in a condition record, the system checks whether the scale value falls below the lower limit.
Or you can use the flag 'conditon update'.
Condition update
Controls whether limit values are relevant for pricing.
E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
This total value can be specified in the condition record.
I hope that the information are helpful.
With best regards
Claudia Neudeck

Price too low - Invoice is not blocked...

Dear,
Probably you all know that invoices can be automatically blocked for payment based on the tolerances set up in customizing. When the price is too high, the system acts like expected, but when the price is too low, we don't get the preferred result. You get a warning message, but no payment block. It would be nice if the invoices with a "price too low" are blocked too.
We don't like to park them, because we work with a scanning procedure, so all invoices have to be posted immediately in the finance department, otherwhise it's very difficult to follow - up...
The purchasing and stock department are solving all the issues (qty and price differences) based on the list in MRBR. If the invoices with incorrect contracts are not in the list, this can give some problems. I've asked the finance people to block the invoices with a lower price manually, but for them this way of working is a little bit annoying...
Does anyone know how to solve this problem? Is there a BADI or user exit (or customizing parameter)?
Thanks in advance!
Kind Regards,
Lien

Please note the following:
The system will check the lower tolerance limit but an invoice will
never be blocked if the LOWER limit is exceeded. The system will only
display a warning message. In the standard system invoices will only be
blocked if the UPPER limit is exceeded because normally one wants to
prevent to pay more than expected.
In SAP Library: MM-Invoice with Variances-Tolerances you will also
find the following explanation:
".. If the variance is outside the tolerance limit, the system displays
this in a warning message. If you do not adjust your entries, you can
still post the invoice. If, however, the upper tolerance limit is
exceeded, the system automatically blocks the invoice for payment."
If this is an issue, message M8084 and M8085 can be customized as
error messages, as a work around. Please transaction OMRM
(spro -> materials management -> logistics invoice verification ->
Define attributes of system messages here you can set message 084 to
error)
You may also want to see the user exit exit_saplkont_002,
enhancement MM08R002 for blocking.
I hope this information will answer your query.

Usb port 1.1 too low

our usb ports are 1.1. too low for ipod shuffle which needs 2.0 if we buy a dock or flexible dock, will both work for converting or will we still be in trouble? operating w/ OS x10.2.8

I'm confused, since Apple claims the shuffle will work on a USB 1.1 port using 10.2.8. (Transfers will obviously be slower.)
If your problem is that the ports accessible to you are low power, for which Apple's recommendation is a different operating system, I'd try a powered hub. The shuffle dock I'm familiar with is really an extension cable with a fancy end on it; to use it you'd want to make sure its male connector was plugged into a port which was providing enough power.
Good luck
srb

Pop up window saying Memory is too low to continue in Logic.Why?Way to Fix?

I recently purchased my IMac OSX 10.6.3 as well as Logic. I have about a half dozen projects on my hard drive now, which is also being backed up to a "time machine" external drive. The projects are pretty small( just piano, or piano and string quartet, etc.) I also just installed Office Suite for Mac and the full Adobe Creative Suite.
Recently when I have been working in the Score Editor(In Logic Pro 9), a pop up window appears saying something to the effect of "memory is getting low, don't install more plugins and remove any unused ones." Then today, after that pop up, another one showed up and said "memory is too low to continue. we will close project, autosave, etc. etc."
Why is this happening? Is there not enough memory on my computer? Will this actually effect editing procedures in Logic? (because it seems like some things aren't working like they used to) Is there a quick and easy fix? Is this related to space remaining on hard drive, or is it completely different? Could it be related to the IMAC backing up files to my "time machine" drive at the same time I am working in LOGIC?
Could someone who has a little time on their hands please answer these questions IN DETAIL? I am new to MAC and LOGIC, so I really have no Idea what's going on with the memory issue. I don't even understand how MEMORY corresponds to available space, quality of running programs, etc.
Please help. I'm working on a deadline to finish a Master's portfolio and this could potentially be a big bump in the road for me.
Thanks....

The System Requirements for Logic Studio call for a minimum or 1 GB RAM with 2 GB recommended. So you should not have a problem with your 4 GB.
First make sure your RAM is being recognized by your computer. Go to Apple Menu (apple in upper left hard corner and click on "About this Mac". Make sure it say 4 GB. Ram chip at times will go bad or become unseated.
Now for troubleshooting, here is what I would do. The next time you want to use Logic, restart your computer. Restarting "flushes" the RAM; it may not sound like it but that is a good thing. Then do not open any other programs other than Logic (except ones you may need for it). You listed an awesome group of software you own. Your computer is not set up for all these programs to automatically start up when you turn on the computer, is it??
So I am betting that you will not get the low memory message when only Logic is working. With some trial and error you will be able to open more and more programs at the same time without effecting Logic.
You can better understand your RAM by opening Activity Monitor (Applications >> Utilities >> Activity Monitor). Click on the System Memory tab at the bottom and you can visualize what your RAM (Memory) is doing. There is also a list of programs that are open and what resources they are sucking up.
Good luck with your computer and your masters.
Arch

Volume too low on ringer and with hands-free headsets

Both the ringer's volume and the volume within headsets are too low in my new Droid X. When holding it to my ear while talking it is loud enough well below max volume, but hearing people through headsets while driving is often too low with all volumes set to max (on loud freeways, for example). I usually keep my phone's ringer on silent vibrate, but it would be nice to be able to turn it up louder when the phone is sitting on a desk at home. Cell phone ringers can be obnoxiously loud, but there are times when people need to have them turned up.
Because it is an issue in both the ringer speaker and the jack for wired headsets, it seems like there is a good chance of getting a software fix to raise the max volume levels. Reading posts on forums, it seems clear that this problem is widespread in most, if not all, Droid X devises.
If you are having similar problems, please take a moment to call both Verizon and Motorola with a polite report of the issue. I spoke with both today and they said they were aware of the issue, and the tech at Motorola said they were "looking into" a software fix for it. If enough people call and report it, we have a better chance of getting a fix sometime soon.
Verizon's support line is: (800) 922-0204.
Motorola's is: (800) 734-5870 (I chose #6 for "other issues" a couple of times after routing into Droid support to get a live tech)
It can be frustrating to filter through the support systems and report it, especially if they tell you to try obvious things like rebooting the phone and turning the volume up, but it really is the only way to get them to fix this issue. Both techs I spoke with actually looked in their systems right away and acknowledged the issue is being reported by people.
Of course, if anyone has a real solution to this issue, please let us know what it is!

Thanks for the suggestion JKramer. I should have been more clear about having adjusted all volumes up in the settings screen. Assuming all sound options are located within the "Settings --> Sound & Display" screen, then yes, I have tried changing them. I have also tried changing the option to "use incoming call volume for notifications" under the "ringer volume" settings, after reading that someone had success in improving volume that way.
This issue is not a problem all of the time. It is only an issue when there is an elevated level of background noise, such as driving on the freeway, or having music or a movie playing in the room.
The phone is otherwise excellent! I live and commute in areas of very spotty reception (with all cell providers), and this phone will keep calls and not even have voices garble where my past two phones have consistently dropped calls in at least five problem locations. So far, everything else about it seems to work great!
Maybe some of these phones don't have this issue. Or, maybe the people who say they don't encounter the problem are lucky enough to live in relatively quite environments most of the time. In a quiet house or office, it is certainly loud enough. It just needs to have the option for increased volume when in noisy places. The issue is that its "max volume" settings are not as loud as with other phones.
Searching for something like "Droid X volume" will indeed show many people experiencing these same problems on various forums...

Too low ringtone n msg tone

Similar Messages

Maybe you are looking for