Too mane Erro 83 (2000 errors !)

GWCHECK with content check.
One user have more then 2000 errors: Error 83.
This example records:
- From: Petrov Sergey
- Date: Jan 10, 2006
- First archive attempt date: Jan 10, 2008
- Number of archive attempts: 1
- Error number on last Archive attempt: 0xC050
34070 ITEM_RECORD check
Error 83- Item failed to archive
- Subject: ?&
How i can repair this errors ?
Serg

POA-log file without error when user run Achive..
But in the GWCHECK, for this user, 2654 errore with code 83.
This first Error from the gwcheck-log:
Duplicate book check complete
- checking Folder records
- checking Category records
- checking Data records
1 FOLDER_RECORD (Universal Inbox)
34024 ITEM_RECORD check
Error 83- Item failed to archive
- Subject: ?
??A
- From: Vyacheslav Skripnik
- Date: Jan 10, 2006
- First archive attempt date: Jan 10, 2008
- Number of archive attempts: 1
- Error number on last Archive attempt: 0xC050
34029 ITEM_RECORD check
Error 83- Item failed to archive
- Subject: ?
??A
Serg
>
> C050 means "Transaction aborted":
> 'Novell Doc: GroupWise 7 Troubleshooting 1: Error Messages - C05x
> Errors' (http://tinyurl.com/36nfuu)
> For some reason the archive cannot be done (check TID 10094373).
> Set the POA log to verbose and try to archive one of the problematic
> mailboxes that cannot be archived. The POA in verbose should give you
> more information about why the archive cannot be done (Maybe some
> message database is damage).
>
> Hope that helps.
>
> Roberto.
>
> serg;1463625 Wrote:
> > GWCHECK with content check.
> >
> > One user have more then 2000 errors: Error 83.
> > This example records:
> > ......
> > - From: Petrov Sergey
> > - Date: Jan 10, 2006
> > - First archive attempt date: Jan 10, 2008
> > - Number of archive attempts: 1
> > - Error number on last Archive attempt: 0xC050
> > 34070 ITEM_RECORD check
> > Error 83- Item failed to archive
> > - Subject: ?&
> > .......
> > How i can repair this errors ?
> >
> > Serg

Similar Messages

  • I want to go back to the previous 2014.2 version.  .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

    2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

    You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
    If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install.

  • Disk too slow and system overload error

    I like many other users am having problems with the "disk too slow or system overload error (-10010)." It only seems to occur during playback attempts, seeing as I recorded with no problems yesterday, and only began happening today (granted, I have not tried recording anything since this started happening). I have tried changing the buffer size (still occurs at all levels), and, as per noted in a similar post, ensuring that my computer does not at any time put drives to sleep. All my sessions are stored on an external Toshiba Canvio Connect 2.0 TB drive connected directly to my computer via USB.
    My setup (I know that this is going to draw a lot of criticism) is a macbook air with 2 gb 1067 MHz DDR3 ram and a 1.4 GHz intel core 2 duo processor, running OS X 10.9.3. While I am fully aware (I promise) that these are well below the recommended numbers, I have been using this configuration since June without any problems whatsoever.

    Clancy,
    No problem!
    I also added it to the Useful links and resources for Logic Pro X  page in the tips sections....
    Cheers..
    Nigel

  • "Balance in Group currency USD is too large for automatic correction" error

    Hello Gurus,
    Please help me..
    When we post document from FB01, we want to enter amount in group curreny different than what SAP calculates, But when we enter different amount(than what sap calculates ) we are getting "Balance in Group currency USD is too large for automatic correction" error.
    We want SAP to take whatever we enter on the Group Currency Amount field and not to calculate/validate anything itself.
    Is it possible to disable this message?
    I tried changing the hard error "E" to warning "W" using "Message Control"  but it did not work.
    Or is there any User exit/ BADI/ BTE, where i can change the tolerance meaning if SAP calculates Group Currency amount $1000.10 and SAP takes upto 1000.18, So if i change the tolerance to 90 cents instead of 8 cents and try to enter $1001 and SAP can take it? ( I know its so weird requirement, we are not using SAP as it is, but everyone really wants it here:(
    Our Local/ Document currency: EUR
    Group Currency: USD
    Please suggest any solution.
    Thanks so much in Advance!

    Hi Shrikanth,'yes I did checked the SAP note and for the correction,
    'Import the corresponding Support Package or implement the attached advance correction'
    frankly speaking, i didnt understood what the SAP note is trying to say   What i can make out from it was that There is some Program error and that needs to be rectified.
    Can You please tell me as to how to imoplement this SAP note.
    Thanks
    Manish

  • Multisim 2001 "too many parameters for subcircuit" error

    When simulating circuits in Multisim 2001 with op amps from User library am getting Netlist Error message "Unable to correctly determine the nodes for the current circuit due to the following reasons:
            Too many parameters for subcircuit type lf156_op_amps_1 (instance: xxu3)"
    or a similar message for whatever op amp am using.  Have tried creating components for several different op amps and always get same error message.  Carefully checked the Pin Mapping Table and the symbol pins are correctly matched with order of pins in model.  The only way have been able to get a simulation to run with op amp components in the User Library is if copy an op amp directly from Multisim library to User library and make no changes whatsoever.  But if do something seemingly minor such as bring up the Symbol editor and add a text note underneath the symbol then get the "too many parameters for subcircuit" error.
    Am also getting a Consistency Self Check error stating "Error: The circuit it empty.  Simulation requires at least one ground."  Do have ground in circuit; presumably this error is related to Netlist error above.
    Operating system is Windows XP Professional.

    Well, this is an interesting situation in Multisim 2001. I tried doing this with another component and had the same results. I just renamed the part with no other changes and re-saved it to my database and sure enough I got this error. I have no idea what is causing this other than just a bug in the software. Us 2001 users will just have to live with this unless someone does happen to find a solution.
    I don't seem to have any problems when creating new components and using or editing existing symbols with new model information. This does suck. What if just wanted to edit one paramenter instead of using a completely different model? I really hope someone can find a workaround or solution to this. I am glad you broughtm this to our attention.
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Erro DXGLRNL FATAL ERROR

    Nossa empressa comprou alguns "Ultrabook HP Pavilion touch 17n070br" com Windows 8.1 e todos vem dando esse erro (VideoDXGKRNL FATAL ERROR) na inicialização.
    Como posso resolver isso.

    Dear Customer,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English:                                 http://h30434.www3.hp.com
    Spanish:                               http://h30467.www3.hp.com
    French:                                 http://h30478.www3.hp.com
    Portuguese:                       http://h30487.www3.hp.com
    German:                              http://h30492.www3.hp.com
    Korean:                                http://h30491.www3.hp.com/t5/community/communitypa​​ge
    Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypa​​ge
     **Click the KUDOS star on left to say Thanks**
    Regards,
    K N R K
    I work on behalf of HP

  • HT5016 microsoft premium 2000 error

    itunes not loading microsoft office 2000 error

    I double checked the name and it's correct. I also typed in the IP address instead of the hostname like:
    jdbc:microsoft:sqlserver://172.16.105.54:1433;databaseName=testdb
    I set the SQL server to use SQL Authentication and created a user and the password. I tried following:
    //the suggested way in the microsoft documentation
    url = "jdbc:microsoft:sqlserver://172.16.105.54:1433;databaseName=testdb;user=user;password=password";
    Connection con = DriverManager.getConnection(url);
    I also tried:
    url = "jdbc:microsoft:sqlserver://172.16.105.54:1433;databaseName=testdb";
    user = user;
    password = password;
    Connection con = DriverManager.getConnection(url, user, password);
    Both gave the same error.

  • Disk is too slow or System Overloaded ERROR

    I have logic studio and a macbook pro and keep getting the following error message:  Logic Pro:  Disk is too slow or System Overloaded (-10010)  Not sure how to fix it.  Any suggestions?

    It's a bug in logic. It's been there since multicore CPUs came out.
    Try putting your fx on a bus/aux rather than on the same track as the instrument.
    That way it will trick logic into using a different core for the different tracks.
    I've seen this problem on dual quad core CPU mac pros, so it has nothing to do with your CPU performance.
    Also if your recording to the internal harddrive whilst playing back audio from it you might run into problems when using bfd2 or addictive drums or any other large sample library type plugin.
    In my MacBook pro I took the DVD drive out and put in an SSD for the OS in its place.
    I then use the internal mechanical drive for recording and samples etc.
    This solved all my issues and made everything so much snappier.
    It's dead easy to do too. Infact it works so well I'm thinking about getting a standard MacBook pro (so I can do the same thing again) instead of the retina one.
    I'd refuse to buy a retina one until I have seen logic play back  1 instance of bfd2 a few audio files whilst at the same time recording a guitar through amplitube 3. I'm not paying £2000 if it can't do that. (you'll be surprised)
    Like I said my old one couldn't do it due to the overloads you mention until I did the DVD drive swap trick.
    The retina looks good but, 1/4" thinner is one thing, but having to carry leads and adapters for everything it kind of defeats the purpose!
    I would need a thunderbolt to FireWire adapter (which aren't out yet) a FireWire 800 lead and a FireWire 800 to 400 adapter jut to plug my apogee duet soundcard in! ***?
    I'd buy a thunderbolt audio interface but their are no mobile ones. The only ones that are out are large ones for the studio (And mac pros don't even have thunderbolt)
    It makes no sense, no sense at all!
    You couldn't make it up. At least they have dropped the dongle from logic so I can plug my mouse in.
    Emagic should release a pc version again. These quarterly decade updates are getting boring!
    Where's logic X?

  • I just noticed that I can no longer get the shuffle feature on my iTunes 10.4.0.80 to work. I've turned it off and on, but it still just goes in order of the playlist. I too have been getting an error msg at computer startup.

    I'm not sure how long it's been like this, but I just noticed that my songs no longer shuffle when playing from iTunes (running 10.4.0.80). No matter if "shuffle songs" is off or on, they still just play on down the playlist in order.  Could this be related to other problems I'm seeing listed that seem associated with the latest update? I also get an error msg when my computer is starting up that I think is associated with this latest update (something about not being able to read a line from "Apple sync helper" (hope I haven't butchered that too much, haven't had a chance to copy the error msg)). Is this something that's likely to be fixed in a later update?

    After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

  • Disk is too slow or System Overload Errors(-10010)

    Hi, It may have been a mistake, but for the 1st time in a long time, I updated my system and software two days ago, after which i tried to runm Logic 9. During playback, I am not getting a random error message that "Disk is too slow or System orverload. This is a system that has operated error free for the past eighteen months, no problems, until now! What really puzzles me about this is the part about "motion Sensor" ! My system is a Mac Pro Desktop unit and not a laptop, and definitely not equipped with and motion sensor(s) at least not that I am aware of.
    Can nyone shed some light on this for me?
    Thanks in advance

    Hi
    rockfort wrote:
    Did you repair permissions after the OS update?
    ** I don't know how**
    To repair Permissions, in the Finder, use the Go:Utilities function, and run Disk Utility.
    In Disk Utility, select the boot drive partition on the left and click on "Repair Disk Permissions".
    rockfort wrote:
    Free space on the OS and/or Project drive(s)?
    ** 1.78TB space free on the drive**
    So, are you recording /playing back your projects from your System drive?
    This is not generally recommended. Instead one should really use an second (Project) drive either Internal (no good for an iMac) or external Firewire/Thunderbolt drive (depends which iMac you have).
    Further, the error message you have been getting is a general "Disk too slow" and/or "CPU overloaded" message.
    It would be worth keeping an eye on the System Performance meter in Logic whilst playing the project (Double click on the CPU meter in the Transport or use :Options:Audio:System Performance) to see if it is CPU or Disk related
    CCT

  • Disk is too slow or system overload error with Logic 9.1.4

    I have am running Logic 9.1.4 on a MacPro 2 X 2.8 Ghz (Intel) with 8GB of RAM running OS X 10.6.7.
    I recently updated to Logic 9.1.4 and was trying to record one track of vocals on a session on which I had previously worked on a few weeks earlier with no issues.
    But today I got this error over and over again:
    Disk is too slow or System Overload.
    Occasionally I would get the message below with the error, but not always:
    The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time.
    I don't have a lap top and tried a few fixes found here (buffer size increase ,rebooting etc.). Again, I recorded several tracks of vocals on other days with absolutely no problems. But today couldn't record more than a few seconds at a time without getting this error. The only difference I can think of is that I updated to the latest version of Logic 9 (9.1.4) rather than whatever the previous Logic 9 version was.
    Any help at all would be greatly appreciated.

    ISSUE RESOLVED!
    So after messing around with this for over 4 hours today, I think I have resolved the issue. 
    The issue seems to have been primarily with my main vocal track, which was frozen while I was recording a harmony vocal.  The main vocal track was actually made up of about 20-30 take folders which I had swiped to make one good take.  I was hoping to take a good hard listen at my swipes during mixing once all recording was done, so I had never merged into one audio track.  Besides, like I said, this track was frozen so I figured it was already playing back as though it was one audio file. 
    So I just merged all the takes in this track into one file.  Counterintuitively, unfreezing about 10 tracks also seemed to improve performance in the meters.  Which makes me wonder whether I should use freezing at all?  Both these things together seem to have made all the difference.
    In the process, I also learned how to run Logic 9 in 64-bit mode, although this (at least by itself) didn't seem to make any difference other than making AmpliTube inoperable.  
    So the lesson here: don't have too many take folders going at once.  And freezing tracks with take folders doesn't seem to come close to being the same thing as playing back one single merged audio file. 

  • Sync fails in iTunes 9.0 & 9.01: "too many files open" and error -6999

    I've been trying to synch my iPod (Touch, g1) for the last couple weeks but have been getting errors ever since going to iTunes 9.0.
    First it blew my library and now says "Previous iTunes Libraries" at the top. Can live with that (after going through and reloading about 2/3s of the album artwork).
    But now am getting two errors every time I try to sync. One is, "Attempting to copy to the disk '[my iPod's name]' failed. There are too many files open currently."
    Elsewhere I saw it suggested for this error that I turn off sharing, but, alas, sharing isn't turned on.
    The second error message is, "The iPod '[my iPod's name]' cannot be synced. An unknown error occurred (-6999)." and I can't find any mention by Apple about what to do about this.
    HELP. Please.

    There has been some advice to turn off "sharing" to stop getting the "too many files open" error message, but, as noted in my question, sharing was already turned off in the iTunes Preferences.
    But, it turns out, of course, that there is another kind of sharing in the 9.x iTunes -- the one for sharing libraries on your local network. Don't know why they are different because the function seems the same, but I noticed that there was still an icon for "home sharing" or "house sharing" (little picture of a house) on the library/playlist list in iTunes.
    I right clicked on the house icon and found another checkbox switch there. I turned that one off too (Why Apple?) and, voila, the "too many files" error has (apparently) gone away.
    Hope this helps some others out there.
    Apparently you have to turn off sharing in two different places. (Again; why is that, Apple?)

  • SQL Server 2000 Error Message

    I got the below error message:
    The description for Event ID ( 17055 ) in Source ( MSSQLSERVER ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display the messages from a remote computer. The following information
    is part of the event: 18456, Login failed for user 'xxxxx_yyyyy'.
    SQL Server version : Microsoft SQL Server  2000 - 8.00.2282 (Intel X86)   Dec 30 2008 02:22:41   Copyright (c) 1988-2003 Microsoft Corporation  Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
    Experts kindly suggest if you would have come across the same scenario.
    Yours
    Mrvsfly
    MRVSFLY

    Also how to track the source ip address for this login
    AFAIK it's not possible to get the information from SQL Server; you could only try to capture the failed logins with SQL Server Profiler.
    See thread Capture information for failed logins
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Microsoft jdbc driver for sql server 2000 error

    I try to connect to a sql server database;
    After execution of:
    C:\Sun\Creator\bin\runide.exe -cp:a =.;"C:\Programmi\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar";"C:\Programmi\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar";"C:\Programmi\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar"
    (where "programmi" is "Program Files" in Italian)
    I can make a connection to sql server.
    When I try to see the "tables" in database I have this error:
    [Microsoft][SQLServer 2000 Driver for JDBC]Error setting up static cursor cache
    I have tryed to found some resolution and I found only this:
    http://forum.java.sun.com/thread.jsp?thread=444136&forum=48&message=2007122
    Can you see if it apply on source of IDE and eventually correct?

    I'm using the new version and I can't update a row
    satRowSet.setDataSourceName("java:comp/env/jdbc/Northwind");
    satRowSet.setCommand("SELECT * FROM dbo.Sat");
    satModel.setWrappedData(satRowSet);
    satRowSet.setConcurrency(java.sql.ResultSet.CONCUR_UPDATABLE);
    satRowSet.setHoldability(java.sql.ResultSet.HOLD_CURSORS_OVER_COMMIT);
    satRowSet.setAutoCommit(true);
    satRowSet.setReadOnly(false);
    satRowSet.execute();
    satRowSet.next();
    try{
    this.satRowSet.absolute(1);
    this.satRowSet.updateRow();
    } catch (Exception ex) {
    this.textArea1.setValue(ex.getMessage());
    ex.printStackTrace();
    java.sql.SQLException: [Sun][SQLServer JDBC Driver]Invalid operation for the current cursor position.
         at com.sun.sql.jdbc.base.BaseExceptions.createException(Unknown Source)
         at com.sun.sql.jdbc.base.BaseExceptions.getException(Unknown Source)
         at com.sun.sql.jdbc.base.BaseResultSet.validateCursorPosition(Unknown Source)
         at com.sun.sql.jdbc.base.BaseResultSet.getString(Unknown Source)
         at com.sun.sql.rowset.JdbcRowSetXImpl.getString(JdbcRowSetXImpl.java:842)
         at com.sun.sql.rowset.JdbcRowSetXImpl.getString(JdbcRowSetXImpl.java:941)
         at untitled.Page1.setFields(Page1.java:133)
         at untitled.Page1.beforeRenderResponse(Page1.java:147)
         at com.sun.jsfcl.app.FacesBean.beforePhase(FacesBean.java:227)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:192)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:191)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
         at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
         at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
         at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
         at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
         at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
         at java.lang.Thread.run(Thread.java:534)

  • The nature of "ORA-01555: snapshot too old..." error

    Hi all,
    Please help me to understand the nature of this error:
    ORA-01555: snapshot too old: rollback segment number 23 with name "_SYSSMU23_755263746$" too small
    One of reports returns this error. Yes, I googled it, but honestly I can't understand deeply what causes it. Usually I resolve it by performing sql request on yesterday's copy of production database. Is it correct to say that this error happens when I try to perform request on tables that are changed in the same moment? What is correct solution to resolve it other than using yesterday's copy of production database?

    marco wrote:
    Antonio,
         The problem is generally small segments of undo, you need to add more space or put guaranty the tablespaces.
    How do I describe it for our DBA (how much extra space do I need and what is the name of tablespace)?
    Before you go to your DBA, you should figure out how much space your largest query/update uses. That is, your biggest transaction, how much space does it need? 10M? 100M? 1G? From there, your DBA can then size your UNDO properly (or at least "more better" ).   Yes he "name of the tablespace" is just called "UNDO").
    As mentioned before, the solution might not even be to increase your UNDO size, but rather to identify the "problem job", and fix it. That's not easy, however, talk to your DBA, he may be able to help with that as well.
    Things to look for:
    1) a job that issues a lot of commits. (suspicious - try to reduce # of commits).
    2) a job that runs for a long time and updates along the way (suspicious - try to reduce run time).
    3) a job that runs for a long time and has no updates (try to reduce run time - in this case, if this job starts running, and then takes a long time, a lot of other jobs may be reasonably doing updates, and this long run query needs to reference a row that was updated - it might lose it in the UNDO, though).
    4) long running queries running at same time as updates on same table. (not always possible, but think about it: a "long running query" is often a "report" of some sort (not always, but often). Try to schedule the reports when less update activity is expected. Or, if the updates are part of the same batch, try to schedule them after each other so they don't overlap. (if the updates are online users, there isn't much you can do except try to decrease runtime of the long running query).
    You DBA can help find candidates for those cases.

Maybe you are looking for

  • How to install fonts in indesign cs5 mac

    My designer sent me some fonts for a document they created for me, but I have been unable to figure out how to install the fonts. Google search and adobe search and still I am not able to figure this out. I am using macintosh os 10.64. Can someone pr

  • Pyament guarantee

    hi,       can any one explain about the <b>payment guarantee</b> procedure in detail thanx in advance

  • What is doing DataSourceUserManager

    I'm trying to change an application that is currently in production on the tomcat to the ias server, I'm using the OC4J 9.0.3 that comes with Jdeveloper, the problem is that using Form authentication my users are not logging into the application (bad

  • Exchange Server 2013 - Mailflow - Transport Rules - Autoreply to External Email Addresses and Customizable Template

    Hi There, I have two question relating to this topic: Question 1 - Can I set up an auto reply message (e.g. Thank you for submitting your enquiry....) to any emails that are only external and not including our domain to the organisation for a specifi

  • Active Protection 'abnormal sensor status'

    Hi, I'd really appreciate some help. I have just replaced my x61t hard disk (due to hd failure) with a WD Scorpio Black 320 gb. I installed Active Protection, and it worked OK for hours, but then suddenly it said that it was disabled because the 'sys