Too many columns for Custom report

Hi,
I'm building a custom XML Publishe report, the O/P will be in excel format.
Problem is that i have too many columns...around 30 which are extracted to excel sheet.
How should i create RTF file with these many columns?
Any suggestion?
Database:10g
Thanks.

Hi,
try the Oracle BI Publisher forum (BI Publisher as you are using XML Publisher.
Regards, Roberto

Similar Messages

Table has too many columns for one pg in InDesign document. How do I force a break?

I have imported an Excel table into my InDesign document. The table is 598 columns wide. Obviously this isn't fitting on one page. I want it to just keep flowing from page to page, keeping one same column at the beginning of each page (like "freeze panes" does in Excel) but it's not doing that. Is this possible in my InDesign document or will I have to manually copy and paste 10 columns at a time, which is about how many are fitting on one page? Any searches I do on this subject just talk about flowing rows but nothing about columns.

As far as I know there's probably no way ID is going to do what you want.
You can place a table across a multiple page spread, but the odds of being able to do that and still keep the file printable are marginal, at best. You can't for example, leave blank space at the gutters unless you are able to add a blank column that spans the gutter, and the limt for multipage spreads is 10 pages wide, whcih doesn't sound like it's probably enough to hold almost 600 columns.
Perhaps placing the table using named ranges of appropriate widths would work...

Too many columns to be shown in the Enterprise Manager 11g?

Hello,
we are having some problems with the Enterprise Manager 11g. When we want to VIEW DATA of a specific table, we get this exception. We think that our table has too many columns to be displayed. If we delete some of the columns, the data is shown in the enterprise manager. But this cannot be a solution for us. Can you help us with this point?
2009-08-03 10:07:04,210 [EMUI_10_07_04_/console/database/schema/displayContents] ERROR svlt.PageHandler handleRequest.639 - java.lang.ArrayIndexOutOfBoundsException: -128
java.lang.ArrayIndexOutOfBoundsException: -128
     at oracle.sysman.emo.adm.DBObjectsMCWInfo.getSqlTimestampIndexes(DBObjectsMCWInfo.java:194)
     at oracle.sysman.emo.adm.schema.TableViewDataBrowsingDataSource.executeQuery(TableViewDataBrowsingDataSource.java:167)
     at oracle.sysman.emo.adm.DatabaseObjectsDataSource.populate(DatabaseObjectsDataSource.java:201)
     at oracle.sysman.emo.adm.DatabaseObjectsDataSource.populate(DatabaseObjectsDataSource.java:151)
     at oracle.sysman.emo.adm.schema.DisplayContentsObject.populate(DisplayContentsObject.java:369)
     at oracle.sysman.db.adm.schm.DisplayContentsController.onDisplayAllRows(DisplayContentsController.java:303)
     at oracle.sysman.db.adm.schm.DisplayContentsController.onDisplayContents(DisplayContentsController.java:290)
     at oracle.sysman.db.adm.schm.DisplayContentsController.onEvent(DisplayContentsController.java:136)
     at oracle.sysman.db.adm.DBController.handleEvent(DBController.java:3431)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:577)
     at oracle.sysman.db.adm.RootController.handleRequest(RootController.java:205)
     at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:121)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:109)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:153)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)When we select the table via SQL, everything works fine.

Hi,
I'm Galit from the QE team of VIN.
All the things that you've described are correct.
It is actually an edge case where the only VM, that the manual App can be managed from its Map view, was removed from the App.
The Manual App management is as designed, and may be changed in the future.
There are 2 ways to overcome this situation:
1.You can, as you stated, create another Manual App with similar name and remain with the "Zombie App".
2. To run a specific command that will remove the Zombie App from the DB.
Please note that option no. 2 involves using an API that we do not publish.
If you would like to use option no. 2 contact me in private and we will see about supplying the relevant commands to run in order to delete the "zombie" application.
Thanks,
Galit Gutman

11g-[nQSError: 42029] Subquery contains too many values for the IN predicat

Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckeng

ckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v

Tabular form: too many columns

What can I do with too many columns in a tabular form? I tried modifying the report template behind and put </tr><tr> inside column template, but I'm unable to find current's loop column number. This would work if after every 3rd column in a report I could do the </tr><tr> thing.
Substitution string #COLNUM# doesn't work in this particular template field.

Hi "prpi",
What do you want to achieve? Have less columns?
Or see them on the next row?
You can use javascript to show/hide columns. Have a look here: http://htmldb.oracle.com/pls/otn/f?p=11933:46:7060485099466175
Hope that helps,
Dimitri
-- http://dgielis.blogspot.com

Too many Columns in the Cross_Tab will get error

Follow the requirement that will so many Columns in the report , and should use the Corss_Tab,But when the data more than one page ,that will get error:Error formatting Cross-Tag Object.
Is there anybody get the same problem ???

Hi Alex,
What version of Crystal Reports are you using (exact Service Pack/Support Pack and Patch)?
If the Crosstab is located on the Group Header or Footer, please see if the resolution from SAP Note: 1214209 helps. This is what it says:
This is a known issue in Crystal Reports and has been assigned Track ID ADAPT00055049.
This occurs because the 'Keep together' option is not selected for the group where the crosstab has been inserted.
To resolve this issue, complete the following steps:
1. From the 'Format' menu, click 'Section'. This launches the 'Section Expert'.
2. Click the group that contains the crosstab and select 'Keep Together'.
3. Click the 'OK' button to close the 'Section Expert' dialog box.
-Abhilash

Unable to load the following resource: Error: too many columns- form won't

Hi ..
Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 .
Unable to load the following resource: Error: too many columns- form won't
Regards,
Vasu

It is something around 256 if I am not mistaken, I dread to think what a form with 700 columns is like to work with.
Cheers
John
http://john-goodwin.blogspot.com/

Too many lines for CO-PA assessment postings in KSB1

Hi Experts,
I created an assessment cycle in KEU1, with one segment, using an PA transfer structure (several cost elements to several value fields), and I´m using one single secondary cost element (category 42) to credit the cost centers.
When I execute the assessment via KEU5, the credits in the cost centers for the cost element category 42 generates too many lines (for example, I had 3 postings to 3 primary cost elements and in KSB1 I have 9 lines of "credits" - operation KSPA.):
Primary Cost Elements:
4110201004 ==> 3.000,00
4110209009 ==> 2.000,00
4110209013 ==> 1.000,00
Secondary cost element (after settlement through KEU5):
6519999999 ==> 134,36-
                            198,92-
                            190,49-
                            291,54-
                            548,27-
                            311,88-
                            2.659,89-
                            1.268,02-
                            396,63-
Do you know how can I summarize this postings to have only 3 (ore one) line for the secondary cost element? I cannot identify what was the criteria used by SAP to generate 9 lines.
Kind Regards
Mayumi

the number of line item crediting the cost centre, shall be the same of the line item required in the COPA posting. So the more receiver you have in COPA , the more line item are created.
Paolo

Transaction code for Custom report

Hi,
How to create transaction code for Custom report ?
the custom report is a drilldown report of COPA, which can seen in tcode FDI3.
then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
Thanks,
Swetha

Hi Swetha,
There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
--Ram

How can I get (using API) the current sort column for some report

hello,
How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
I thought it was posssible by using
APEX_UTIL.GET_PREFERENCE (
p_preference IN VARCHAR2 DEFAULT NULL,
p_user IN VARCHAR2 DEFAULT V('USER'))
RETURN VARCHAR2;
function, but I don't really know which preference should I pass as parameter.
looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
Can I get (using API) a list of all preferences set for some user ?
Thank you,

seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
is there anyplace where I can get these kind of things documented ?
Thank you.

How many photos are too many photos for iPhoto? When do I need to upgrade to Aperture?

How many photos are too many photos for iPhoto? When do I need to updgrade to Aperture?

Hi Terrence, this is what happens, all too often when I click on something, sometimes it takes me 5 more clicks on the mouse while moving the cursor around to get rid of it. The one below popped up as I clicked on my junk mail.
The next one popped up when I was trying to get on to a site. This happens all the time. Don't know why it is happening. It happens on iPhoto, Aperture, everywhere I go, FaceBook...everywhere and at any time. So frustrating. I don't know if this is normal, but this was happening just before my last mac died a year ago.

Working with 30 Camera angles in multicam sequence, best workflow, too many cams for system to play all at once

Working with 30 Camera angles in multicam sequence, best workflow, too many cams for system to play all at once

Get a halfway decent system, something like:

"Bad Data, too many results for shortname"

Every 10 minutes since October 13 the wikid error log has recorded the following error message:
*"Bad Data, too many results for shortname: username"*, always naming the same user, who is not actually doing anything.
Coinciding with that message at the same time every 10 minutes, the system log records 13 or 14 of the following:
*"Python\[15645\]: ••• -\[NSAutoreleasePool release]: This pool has already been released, do not drain it (double release)."*
15645 is a process owned by _teamserver, which would appear to confirm the connection between the python and wikid error messages.
Last clue: The messages (I have determined in hindsight) started while I was setting up the server to do vacation messages. The user named in the "Bad data" messages was the user who wanted to (and did) set up a vacation message at that time. They worked, too.
Anyone have any ideas about what is going on and how to fix it? BTW, google does not find even one page where this "Bad data" error message is mentioned.

Thanks for your response. To answer your questions:
+Are you using AD for your directory?+ No. OD master only.
+Are there users with duplicate shortnames in your directory system?+ No, and to double check, I searched with WGM and only the one came up.
+As a bit of background, the wiki server keeps an private index of user and group information so we can track user preferences, and the "Bad Data, too many results for shortname: username" error is triggered when we do a lookup in that index for a particular user and we (unexpectedly) hit duplicate entries. Are you seeing an issue with using the software, or just an annoying log message?+ It's hard to say (for me) what might be related. The directory or wiki related issues with the server include:
• A memory issue with slapd that eventually causes it to crash. (preceded by lots of "bdbdbcache: db_open(+various: sn, displayname, givenname, mail, maybe others+) failed: Cannot allocate memory (12)" and "logging region out of memory" and "index_param failed" errors.
• The wiki is slow, despite very light use.
• Wake from sleep (network clients with authentication required) can be very slow. Several minutes even.
Any suggestions you may have would be appreciated.

Acme GiFEncoder: java.io.IOException: too many colors for a GIF

I have been using the Acme GifEncoder to save images as gifs. I have been using this quite successfully until today. For some reason it now gives an error when I try to use this in some circumstances. The exception is:
java.io.IOException: too many colors for a GIF
I am not sure why it will work in some situations and not others. If anyone can give any insight on this problem then I would appreciate it.
Thanks

Thanks for the reference to the quantizer. I will try it out and see if it works.
That is going to lead me on to have a bit of a rant about GifEncoders. I realise that gifs are limited to 256 colours. It is ridiculous that a GifEncoder would not limit the number of colours for you. If you have an image in another format such as jpg that does not have a limit the number of colours, the encoder is not able to convert it into gifs unless it has the number of colours reduced. As far as can tell this should be an essential function of the encoder, unless anyone can tell me differently.
Also if anyone can advise me on the Acme JpegEncoder I would appreciate it. It does not seem to work in any shape or form. I am not trying to do anything in particular with it now, so I have no code to show. I did try to use it before and it did not seem to work, so if anyone knows how to get it to work that would be great.
Once again, thanks for your help.

Multisim 2001 "too many parameters for subcircuit" error

When simulating circuits in Multisim 2001 with op amps from User library am getting Netlist Error message "Unable to correctly determine the nodes for the current circuit due to the following reasons:
Too many parameters for subcircuit type lf156_op_amps_1 (instance: xxu3)"
or a similar message for whatever op amp am using. Have tried creating components for several different op amps and always get same error message. Carefully checked the Pin Mapping Table and the symbol pins are correctly matched with order of pins in model. The only way have been able to get a simulation to run with op amp components in the User Library is if copy an op amp directly from Multisim library to User library and make no changes whatsoever. But if do something seemingly minor such as bring up the Symbol editor and add a text note underneath the symbol then get the "too many parameters for subcircuit" error.
Am also getting a Consistency Self Check error stating "Error: The circuit it empty. Simulation requires at least one ground." Do have ground in circuit; presumably this error is related to Netlist error above.
Operating system is Windows XP Professional.

Well, this is an interesting situation in Multisim 2001. I tried doing this with another component and had the same results. I just renamed the part with no other changes and re-saved it to my database and sure enough I got this error. I have no idea what is causing this other than just a bug in the software. Us 2001 users will just have to live with this unless someone does happen to find a solution.
I don't seem to have any problems when creating new components and using or editing existing symbols with new model information. This does suck. What if just wanted to edit one paramenter instead of using a completely different model? I really hope someone can find a workaround or solution to this. I am glad you broughtm this to our attention.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Too many columns for Custom report

Similar Messages

Maybe you are looking for