Too many devices on one account??

We are a family of 6 and we recently purchased two I Pads for our children to share. We also have 4 Ipod touches, 2 I phone 4's and a Mini Mac. We utilize one I tunes acoount with 2 PC laptops and the mini mac serving as the bases for downloading movie, music, tv shows, etc. We I be able to run all of these devices off of only one I tunes account or will I be forced to create multiple accounts?

You can use as many iDevices as you want to use with one iTunes account. You can only authorize up to 5 computers at any one time to use with one account but there is no limit on iPods, iPhones and iPads when using the same account.

Similar Messages

Trying to sync iPhone with iCloud.. says too many devices.Remove one

What is the process to remove iOS devices from your iCloud. Trying to sync iPhone with iCloud under the settings and it says too many devices. Remove one.
Thanks

I suspect the message is referring to you having too many devices associated with the Apple ID you are using for iCloud. You can have a maximum of 10 devices associated with an Apple ID, 5 of which can be computers. This article explains how to remove a device from your Apple ID: http://support.apple.com/kb/HT4627.

How can I change the icloud for a device? I have too many devices on one icloud

My daughter"s ipod is on my cloud and we need more space. How do I change her device over to her on icloud?

If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

HT1203 how many devices can one itunes account support?

How many devices can one account support? My children have apple products but im an overprotective mommy amd want to monitor it all in my acct. (4 kids)

Up to 10 devices total (up to 5 of those can be computers).

HT1420 I'm trying to authorize a new computer with an itune account, but my the computer statea that I have too many devices authorized. I only have 2 computers in my possession now. How can I deauthorize computer I don't have anymore without deauthorizin

I have recently purchased a new lap top. Both my wife and I share our Itune music. When I purchesed the computer I was able to authorize my itunes account on it and move my purchaced music over from my iphone. However, I was not able to move my wifes music over because she has too many devices authorized under her account. Most of those computers are no longer in our possession and have been thrown out. How can she deauthorzise computer we don't have in our possession anymore without deauthorizing them all?

Authorizing deauthorizing has NO effect at all on your itunes library. You lose nothing.
You should also alwasy have a backup copy.
You MUST deauthorize all.
You have the only answer there is.

Digital Editions: The account you tried to log in with is activated on too many devices.

Digital Editions: The account you tried to log in with is activated on too many devices.
How do i reset it???
Chat does not run, my english is not got enough to call the hotline.
I didn*t find out how to contact adobe support by email :-(((
So, what can i do? Please help.
Otherwise, i can not read my ebooks any longer :-(((

The only people that I'm aware of who can reset your activation count is
the Adobe Help line that you call. And many of those people have to be
told that it is their job. This forum does not have the ability to forward
posts to Adobe technical support to get these kinds of problems resolved.
Trust in your English - or perhaps have a friend that speaks English better
do the talking.
I have to ask what you have been doing that used up all of the
activations. We need to fix the root of the problem.
=================

HT5622 i can't access my itunes account because there are too many devices attached too it?

I can't access my itunes account because it says i have too many devices attached to it. I need to clear some if the devices that are associated with my account?

Welcome to the Apple Community.
Remove some of the associated devices using your account settings in iTunes.

Router connection problems - DISH satellite receivers or too many devices?

(Sorry about that - I thought I had broken the message up.)
I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
I have the following:
- Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
- HP desktop running Vista Home Premium
- Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
- Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
- Linksys WRE54G Wireless Range Expander, v3
My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
Within an hour my connection timed out.
Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
ping 192.168.1.1 -t
I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
Anyway, I would very much appreciate some help.
Message Edited by CKdoubleU on 10-01-2008 08:43 AM

First please break that long text into separate paragraphs. No one wants to read one long runon sentences
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

I have been blocked from my own ITunes songs because my apple ID associated with too many devices

I cannot access songs from my own iTunes Apple ID because it says my iPhone has been associated with too many devices. I have to wait 90 days to access my own songs on my iPhone. Here is what happend:
1-Our family moved. So, with the address change, the credit cards on all of the apple ID's would no longer work because the other users had our old address. (I have 4 users in the family).
2-My family started calling me while I was out of town complaining that purchases were rejected. This was because our address had changed and it no longer matched.
3-I tried to walk them thru the process of changing the home address on the credit card, but they couldn't do it. They assured me that they were doing it correctly and were still rejected.
4-So, being the techie of the family, I simply logged into each of their iTunes accounts from my iPhone while I was out of town and made the address change. While I was in their accounts, I noticed they didn't have automatic downloads and iTunes match and stuff. So, I changed it so it would work for them when they logged back in.
5-I go back to log into my own account on my iphone and I cannot access my own songs on the iTunes cloud for 90 days!!!! This is quite disappointing.
How can I get this corrected? I tried to reset user settings (not a erase and reset). I figure it's not my phone, but my iTunes account thinks I'm doing something sharing-wise.
So, in summary, when I am on my iPhone and I go to my iTunes library and click on a song (that I have paid for) with the cloud and down arrow beside it, it's rejected. It says that I have too many apple id's associated with this device and I must wait 90 days. It counts down each day.
I just want access to the music I paid FOR!!

Thank you-I will contact support.
No, I cannot wait 90 days.
Let me restate what I have to endure, even though I own the music and have paid for iTunes Match:
I cannot access my purchases-zero-at all
I have to listen to never ending McDonald's latte commercials and progressive insurance. I have now banned both of those annoying businesses and will not make purchases there.
In summary, I have given apple my minded, and have zero to show for it.
Ps-you get to hear the McDonald's "love hate commercial" every 2 songs on iTunes Radio. I have substituted the words where I hate McDonald's and love when the commercial is over.

I have lost my iTunes music because of too many devices

many of my songs won't play on itunes for having too many devices....and wanting passwords for aol. that i don't have anymore...how do I update which devices to delete ...I have an imac, ibook, ipod, and ipad.....mt

Use iTunes on your computer. Go to Store > View Account from iTunes' menu. Sign in and choose "Manage Devices".

Can I use iCloud to since many users to one account for my business and have me as a administrator to oversee and change peoples calendars?

Can I use iCloud to since many users to one account for my business and have me as a administrator to oversee and change my employees calendars and contacts??

Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID? (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud. Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

The same 5 devices with one account, one is broken down and bought a new one

hi,
my question is:
i have the same 5 devices on my itunes account, and one of this devices is broken down, and I buy a new one. Now the problem: There are only 5 same devices for one account, can I delete one of theses devices to use the new one with this account?
lg swengi1991

it's not real the problem, but i'm interested whta to do in this situation.
lg

Is it possible to have too many keyframes in one project in Premiere?

Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digi

Bill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi

Error message about too many devices activated.

Need to reset devices for Adobe reader. Error message about too many devices activated.

Reader has no such limitation. It's either Acrobat or Digital Editions.

Too many devices

I received an error message when trying to authenticate my Kindle device to use Overdrive that I had too many devices authenticated to my ID. What can I do?

This is a question for the DIgital Editions forum It has nothing to do with Reader.

Too many devices on one account??

Similar Messages

Maybe you are looking for