Too many disk I/O tasks. (Elastic Audio) (-10022)?

I'm also getting an error that says:
Extreme compress factor detected during playback. (Elastic Audio)(-10025)
The project I'm working on is actually quite basic and simple. Logic keeps stopping my sequencer and posting both the messages. What's up?
Thanks in advance!

Are you using Flex? It seems like you are using that, or a feature related to that. And wherever the problem is, you can probably get around it by using Bounce Regions in Place.
Is it always stopping at the same place? I hope so, because that will make is easier to figure out which track(s) is the culprit.

Similar Messages

Too Many disk I/O tasks (-10022) error playing song after edits

I have been fighting Logic 9 throwing the "Too Many disk I/O tasks (Elastic Audio) (-10022)" error when playing back a song with 12 tracks of audio AFTER I cut across 8 tracks (of drums) and move regions around. The Disk I/O indicator never shows more than 1-2 bars, tops when this error is thrown. While writing this up and troubleshooting, the problem has seemed to sort itself out, but only after doing some peculiar steps.
*System is MacPro 2x2.26 Quad-Core, 8GB RAM, Mackie Onyx 1620 recording to 500GB WD MyBook Pro over FW800. I/O Buffer = 128.
1) Grouped the 8 tracks of drums (there are 3 takes on each track). Play back song. No problems.
2) Cut the drums at bars 73, 81, 105 and 109.
3) Drag-copied the regions from bars 105-109 to 73-81.
4) Playback song, error thrown at bar 70
5) Increase buffer size to 256.
6) Playback song, error thrown at bar 70
7) Increase buffer size to 512.
8) Playback song, error thrown at bar 70
- Thought this might be a disk problem.
9) I copied the project with all the files to the internal Seagate and open the project.
10) Playback song, error thrown at bar 70
- Thinking this is not a disk problem.
11) Open the project on the original WD external drive.
12) Mute all regions an all drum tracks except the kick.
13) The song plays back normally.
14) Un-mute regions on 1 track and playback and repeat for each track.
15) The song plays back normally until the 8th drum track is un-muted, then the error is thrown.
16) Mute and un-mute the regions on 8th drum track.
17) The song now plays back normally. Error no longer thrown.
Looks like after making the edits, muting all the regions and un-muting them 1 by one might have cleared this up right away.
Is anyone else is experiencing something similar? If so, how are you working around this?

No, didn't solve it yet, after I'm done completing work to meet a deadline, I will do some experimenting and see what I can figure out. But so far I've had this phasing issue occur in two different sessions on two different rigs (both Mac Pro dual-quad core with lotsa RAM)...
One test that anyone could try... to really max it out... take one single source and record it onto 20 tracks at once... or I guess you could just record one track and then duplicate it 19 times, whatever. Group all these tracks, keep `em all at the same level. Then take a listen to all tracks at once using some good headphones.
Then put all the tracks in flex mode and do some flexing, flex every single quarter note this way and that way for three full measures or so, whatever. Then play it back again with headphones. If you hear ANY hint of phase shifting, then you are experiencing what I am experiencing.
For anyone who might not be familiar with the "phase shifting" sound I speak of, it pretty much will sound as if you are running your tracks through a classic "phase shifter" effect pedal or whatever. If using headphones, it'll seem like the audio starts swirling around in your head like some wacky stereo effect, frequency response will change and shift, etc.
I've noted that I have not always heard phase issues when flexing, it seem to be a bit inconsistent. It may be because I've been working in some very large sessions, maybe in my situations Logic was already being heavily taxed and then the extra flexing just put it over the edge. Don't know. Will do some testing perhaps next week.
But, I'd say everyone should be careful about this before bouncing forever to disk and then maybe deleting all your old raw audio, because if you permanently write in some wacky phase shifting between your group of drum tracks and have no original raw files left, you'll be in very big trouble... I don't think there would be any way to fix that. In a professional level mix, that type of issue would stick out like a sore thumb. I guess one fix would be to apply a phase shifter effect across the entire drum bus... on purpose... as some sort of artistic statement... hey, it might sound cool!
This whole issue has made me realize how incredibly important it is for DAW tracks to remain truly phase locked at all times. Been working with DAWs for years now and never really thought about it. In one regard, this is a lot to ask... to make sure your 30-odd tracks or whatever are always dead in time with each other, to the sample. It's certainly of critical importance, at least for multiple tracks of the same exact source (like when you have 12 mics on a drum kit etc).
Actually, perfect time synch is just as critical for even a mere TWO mics on a given source... any stereo recording. Once one track goes out of "synch" with the other, even by a minute amount, just for a short amount of time, you will HEAR it.,.. and it won't be good... unless you desire a wacky phase shifting effect.

Flex Time error: Too many disk I/) tasks (Elastic Audio)...

I've been using flex time to take a sample in straight time and make it swing, but I've been having playback issues. I get two different error windows 1) Extreme compress factor detected during playback (Elastic Audio) (-10025) and 2) Too many disk I/O tasks (Elastic Audio). Also, I occasionally get a loud static sound when playing the sample. I don't have this issue when in Flex mode if I only loop the sample twice, but if I try to loop it more than twice, I'll get the errors and/or the static sound. At no point do the stretches make the audio color red, so I don't think I'm over-stretching or over-compressing the audio Is there any way to solve this? Does flex time have limitations to the number of markers used?

Yeah, the I/O error is because you're basically pushing it too hard, it can't read what you're doing fast enough to process it. I got this the other day when I was trying to use flex within a take folder over multiple comped takes.
If you want to swing the audio, why don't you cut it into regions, send it to the EXS 24 and then quantise the samples with swing in the piano roll. That way you're not putting so much pressure on the processor.

Appearance of Desktop - Too many disks shown - GoogleEarth, Firefox, MSN

I have a question regarding the desktop image. I know how to change the background, arrange folders, etc... However, when I open a program up such as Google Earth, MSN Messenger, Firefox, whatever, a hard drive/disk or whatever it is appears. If I put it in the trash can an forget that it is in there when I empty my trash I have to reinstall it, remove it from dashboard, etc...
Is there anyway to avoid this and keep the clean look by hiding these icons???
Thanks in advance.,

I am guessing that you didn't 'install' those applications properly. The disks that you mentioned showing in the Finder/Desktop are the image files (with extension .dmg) that you downloaded from their corresponding web site, which is the way of how software are packaging in Mac. The way to 'install' the applications is to drag the application from the disk appearing in Finder/Desktop and drop it to your Application folder (appearing in the sidebar of Finder) or other folders that you like. After the application finished copying itself to the Application (or other) folder, you can dismount the disks (in Finder, click the eject icon next to the disk, or in Desktop, Command (or right) click the disk and choose eject). You can remove the disk images (i.e. files with .dmg extension) or back up them, or whatever you like.

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Disk Utility verfy found too many clusters allocated

I just purchaced a new LaCie firewire drive. While copying files over to it I got some errors. I ran Disk Utility "verfy" on it and got the following:
Verifying disk "LACIE".
** /dev/disk3s1
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
/Desktop DF has too many clusters allocated
Drop superfluous clusters? no
** Phase 4 - Checking for Lost Files
1284 files, 1097600 free (2393596 clusters)
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
/Desktop DF has too many clusters allocated
Drop superfluous clusters? no
** Phase 4 - Checking for Lost Files
1284 files, 1097600 free (2393596 clusters)
Verify completed.
Do I need to do a repair? Are these errors? Will repare delete the files I've already copied? I want to send this drive to my father in Venezuela. I need to make sure the drive is ok. The errors I got concern me. Should I re-initialize the disk? He is running OS 9 so I need to make sure he will be able to read it.
Thanks,
Alfredo

Hello! The drive is formatted to fat32. Reformat (in disk utility)it to Mac OSX entended and check the box "install os9 drivers". If you use the "zero" option it will lock out any bad blocks....it's a good idea to do this on a new drive. Tom

Too many failed message tracking resquests via task in Exchange 2010 SP3

Hi,
We are getting this alert every day and I don't find anything to solve it...
Some days it's Yellow (3%) and the others it's Red (5%)... But we don't have 5% of the messages failed.
Do there is a solution to this problem or even somewhere to look ?

To Fix your issue, try to override monitor rule of KHI: Too many failed message tracking requests via task – Red (>5%) and also rule of KHI: Too many failed message tracking requests via task – Yellow (>3%)
Also you can refer below link
http://social.technet.microsoft.com/Forums/en-US/089b0c7c-77c5-47ef-9e48-7e44a8f1d2a1/khi-too-many-failed-message-tracking-requests-via-task-in-exchange-2010-sp1-management-pack?forum=operationsmanagermgmtpacks
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Can't Solve the "Too Many Clients Tasks" Problem

Hello All ,
I am creating a java desktop application , and i keep getting this error message:
[Microsoft][ODBC Microsoft Access Driver] Too many client tasks.
Any way ,i googled for this error and i found that because i creates many connections with database "more than 10 i think " , and that why i get this error message ..
The problem is that i do not know how to solve it , i tried to close the connections and i still getting the same error
I searched this forum , and someone suggest to close the connections and the statements and the resultset , but still not working
this is the code
public class Database_Mangement {
    private String User_ID;
    private String user_name;
    private String password;
    private Admin_Connection c;
    private Connection conn;
    private Connection uni_conn;
    private ArrayList<Admin_TableEntry> data;
    public Database_Mangement() throws SQLException
      conn = null;
      uni_conn = null;
      conn = DriverManager.getConnection("jdbc:odbc:smart_database");// Connect with database no 1 through ODBC
      uni_conn = DriverManager.getConnection("jdbc:odbc:uni_database");//Connect with database no 2 through ODBC
      data = new ArrayList<Admin_TableEntry>();
     ArrayList<Admin_TableEntry> getInformation(int type)throws SQLException
         Statement stm = null;
         ResultSet getInfo = null;
       try{
         //get User Information
            if(type==1)
                 stm = conn.createStatement();
                String temp;
                temp = "select * from Students";
                getInfo = stm.executeQuery(temp);
            else if(type==2)
                 stm = uni_conn.createStatement();
                String temp;
                temp = "select * from Students";
                getInfo = stm.executeQuery(temp);
             while(getInfo.next())
                  Admin_TableEntry tempclass = new Admin_TableEntry();
                  if(type==1)
                  {tempclass.ID = getInfo.getString("Student_ID");
                   tempclass.Name =getInfo.getString("Student_Name");
                   tempclass.balance=getInfo.getString("Student_Balance");}
                  else if(type==2)
                      tempclass.ID =getInfo.getString("Student_ID");
                      tempclass.Name = getInfo.getString("First_Name");
                      tempclass.Last_Name =getInfo.getString("Last_Name");
                      tempclass.haveaccount=getInfo.getBoolean("Have_SmartCard");
                   data.add(tempclass);
catch(Exception e)
{System.out.println(e.getMessage();}
finally
     conn.close();
     uni_conn.close();
    stm.close();
//    getInfo.close(); Please note that i get an error message when i try to close the ResultSet
//and this is the error message
// Exception in thread "main" java.sql.SQLException: ResultSet is closed
               return data;
}and thank you for your time..

Thanks , but it only solved the ResultSet.close() problem ,
i am still getting the Too Many Clients error
and i am closing every connection i created after the end of every function .
i think i will switch to SQl server 2008 ... Hope it will be better

MS ACCESS EXCEPTION TOO MANY CLIENT TASKS

hi all
i am developing an application in jsp for calll center users.
there are 4 types of users who can interact with the appl
in that 100 users of one type are interacting with it.
i am using MS ACCESS for the database connection.
it is working well when 10 users simultaneously logs in
but when users increases its capacity degrades and it throws an exception TOO MANY CLIENT TASKS
i have surfed through net and diffrent forums in that the soln is to switch to Mysql or SQL SERVER
i had talked to the PM
he needs in MS ACCESS itself
i am using tomcat version 5 jdk 1.5

LOVECODING wrote:
hi all
i am developing an application in jsp for calll center users.
there are 4 types of users who can interact with the appl
in that 100 users of one type are interacting with it.
i am using MS ACCESS for the database connection.
it is working well when 10 users simultaneously logs in
but when users increases its capacity degrades and it throws an exception TOO MANY CLIENT TASKS
i have surfed through net and diffrent forums in that the soln is to switch to Mysql or SQL SERVER
i had talked to the PM
he needs in MS ACCESS itselfSounds like your PM is screwed.
i am using tomcat version 5 jdk 1.5Irrelevant.
%

SQLException :Too many client tasks problem

Hi,
In my Standalone Java Swing application, iam using connections to the MS-Access Database using Connection pooling..Iam initializing around 10 connections. After executing, performing some operations on application, after sometime...i get the SQL Exception Too many client tasks exception..
I have checked my programs..iam closing all my result set and prepared statements..
Where am i going wrong?
Can anybody pls advice me to solve this problem?
Regards,
SRhodes.

remember access has a max number of connection to handle which you are not closing. you close only resultset and statements
ivo

File won't import due to 'Too many audio channels'

I've managered to import one 30 minute video recorded off a screen recording program off the AppStore called ScreenRecordStd. This software has an 'include computer audio' button which I activated after the first 30 minute video.
Once trying to import any videos with this selection activated they won't import, telling me there are too many audio channels.. so I know it is due to this selection. The file information tells me I have two AAC 44100 Hz Stereo files as part of the video, when I change it to mp4 or h264 file formats it does import but the video/audio are not in sync when played through on Premiere Pro but are totally fine in QuickTime player.. also the second audio channel is a lot quieter when being played through on Premiere Pro than in QuickTime.
So, I hoping someone has came across this software or this problem and can help me. So I have two 44100 Hz stereo files within the video and the selection I am using says it can take up to three stereo files, so why is it telling me it can't import because there's too many audio channels??? I've tried changing the video to h.264, mp4 and they just struggle with the video being too slow and avi. just has the same issues as .mov.
Can anyone help?
Thank you.

Why do you convert the media to start with? Are you aware of that you are converting the camera's MPEG2 to the MPEG2 you get when creating the new MXF file? (XDCAM HD = MPEG2)
I would never ever re-compress/convert the already-in-camera-compressed MPEG2 to compressed MPEG2 for editing and then having it to end up in let's say either MPEG2-DVD or H.264. You loose one generation and i would not want to lose it by re-encoding to MPEG2 since, imo, re-encodong MPEG2 to MPEG2 should be avoided. (MPEG2 to MPEG2 = The quality is degraded too much) If you still want to re-encode the footage i would use another codec, DNxHD/CineForm/Lagarith. (Pick your favorite)
You can use the MXF files from Canon XF Utility in CS6. (The files MXF are just copied from the original folder structure, so no re-encoding is done.)
AFAIK, the problems with tearing video go away by using the MXF files you get from XF Utility. If the tearing is still present, close Pr and delete all Cache files. Open Pr and let the Generating Peak file finish.
AFAIK 8 audio channels are standard in MXF OP1a according to SMPTE D10.
/Roger

Livecache issue LC10 BY0 Too many users (task limit)

Hi,
we have 2 application servers with one CI/DB, maxusertasks is 500
we figured out a livecache pb, with the following error messages
(db analyzer)
LC10 BY0 > Too many users (task limit)
User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SAPAPO_CLEANUP application pid
User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SIM_SIMSESSION_CONTROL, pid 31685
...User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : APS_ACT_SCHEDULE, pid 3168
before we had the warining: UTK5 is running 1804s, CPU 50% and CPU 100% (LC)
we have checked knldiag/knldiagerr files and we are unable to find what is the root cause of the problem?
How could we analyse this issue and find the treatment which triggers this issue?
(trace: (SAPAPO/OM01)
Thanks and Best regards,
any help would be rewarded.
Best regards,
John
Edited by: DCWE COREADMIN on Feb 11, 2011 6:54 PM

Hello John,
We need additional information about the liveCache version, OS of the liveCache server; more details about situation when the issue occurred. Run "x_cons <SID> sh all 10 10 > task_info.txt" when the issue occurred to collect more information.
Check if the savepoint task is active - "x_cons <SID> show active".
Is the issue occurred during high loading to te liveCache?
Please review the SAP note 1391322 where the SPORADIC standstill in high load situation is also described, this issue is already fixed in the new liveCache releases.
This situation occured sporadically. It will be helpful to login to your system for further analysis of the reported issue to get clear if your system run into this known problem because the savepoint was hanging, because of that you had big amount of the user tasks which were hours in the state 'Prep-End' until the liveCache restart.
< It could be the reason for "livecache issue LC10 BY0 > Too many users (task limit)", you reached the MAXUSERTASKS limit,
the increasing of the liveCache parameter will not help you to solve the issue. >
You checked/saw the Database Analyzer log :
"User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SAPAPO_CLEANUP application pid
User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SIM_SIMSESSION_CONTROL, pid 31685
...User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : APS_ACT_SCHEDULE, pid 3168
You are SAP customer. As already recommended by Ivan, create the SAP message to the component "BC-DB-LVC" and get SAP support.
Thank you and best regards, Natalia Khlopina

"Too Many Real Instruments"

I am posting this in the '09 topic, but my question really dates back to Garageband '08. I rely on Garageband often, and I'm a big fan of it. However, it contains a serious problem which I need fixed.
I create a new project, drop a single iTunes song into it, and begin to edit. Almost every time, randomly while playing the song the "Part of the project was not played. This project has too many real instrument tracks to be played in real-time" warning message appears. I only have 1 track! Worse still, my audio driver lets out a terrible "HONK" which startles me and blasts through the entire house. After that, My sound output faintly exists until I open up Audio MIDI Setup and change a random setting on my output.
I am quite tired of this predicament. Is there anyway to fix this (without money)?

I was experiencing a similar problem, and I just got off the phone with applecare and went through all their steps.
I'll try my best to recount them here. But before I do, let it be said that the tech fellow, once he heard what I was doing, exclaimed that my core problem was that I needed to be creating new projects, and not re-using the same project (ex. "My Song 2") over and over.
What I've been doing is backing up a pile of mini-discs that have live concerts on them. A couple of hours of audio each one, and I've been recording them into Garageband. After I divide the concert up into songs and export them to itunes, I've been deleting the track in Garageband and then importing the next concert (repeat x 10 concerts).
About 7-8 concerts in I started getting that popping sound when the sound would cut out (made the sound of depressing the safety-seal bubble on the metal lid of a jam jar). At first, quitting Garageband and opening it again would work. On the 10th concert, when the sound cut out the sound for the whole computer would stop working (itunes, volume buttons on my keyboard, everything).
So the tech fellow said the lesson is this: create new projects. Don't be shy about it. No need to re-use and recycle in cyberspace.
Now - my applecare steps:
- First we went: Macintosh HD, Library, then dragged "Caches" to the trash
- then went to Finder, Go, Utilities, Disk Utility, Macintosh HD, Repair Disk Permissions (that took some time)
- then restarted the computer
All seems to be well now.
Good luck

Too many disk I/O tasks. (Elastic Audio) (-10022)?

Similar Messages

Maybe you are looking for