Too many docked ScriptUI panels bog down interface?

Has anyone else run into this problem? I have about 10 ScriptUI panels docked around my AE interface. It seems like when I select a layer, it can take 3-5 seconds for the Effect control palette to appear.
Do Script UI panels slow down the entire AE CS4 interface?

Navarro:
Having 10-12 ScriptUI panels docked is not known to cause a bog down of the application per se.
But it could be good performing a couple of tests.
For example, if you switch to a different workspace (also with the panels docked), do you still get this?
Does this happen with an empty (or nearly empty) project as well? Or it only happens when you have a lot of comps/viewers open?
If you switch to the "All panels" workspace (forget ScriptUI for a second), is it still slow?

Similar Messages

Crash on closing docked scriptUI panels

My system is crashing every time I close a ScriptUI panel that is docked using the little 'x' next to the Script name. If I undock the panel so it's a floating window and then close it, everything is fine. If I use the dropdown menu and select 'Close Panel' everything is fine.
Crash Report: http://cl.ly/2Z1c2N2l2k2Z0r0H2D3I
OS X 10.7.3
AE CS5 10.0.2

Thanks for reporting that.
Would you mind submitting a bug report, too?

Does loading too many classes into jvm slow down performance?

hi all,
does loading too many classes into jvm will slow down performance. Our application is CPU bound, if we use any framework we need to load all the classes related to that framework in JVM. Does this have any effect on the performance of the JVM.
thanks and regards,
akmal

does loading many classes into jvm slow down performance.It will increase the time it takes for the JVM to load your application.
Our application is CPU boundThe time it takes the JVM to load your application is not likely to be an issue for you then.

CO 1SRJ-001: Too many line items selected via report interface

Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year): provides an overview for the last 12 periods of actual and plan data.
When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods: 2008/9 to 2009/8. But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
I searched and found Note 127643 that described a similar but not exactly the same situation. Have anyone have any problems with this report? Any suggestion is appreicated.
Regards,

Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved. The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months. The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version. I imported the updated version of report from client 000 and now it works fine.

Too many addresses - unable to scroll down in error message

I composed a message with a couple of hundred addresses to send on gmail. The message bounced back with an error message saying that the email could not be sent with the server. The list of addresses that could not be sent start about 1/4 of the way through the complete list that was on the original message which gives me the impression that the list was simply too long.
I know there are instructions at the foot of the list, but I can't find a way to scroll down to the bottom of the list because it goes off the bottom of the screen. The message no longer shows in drafts or the sent file. When I do a force quit and restart the message comes up in the same format and I'm unable to do anything with it because the instructions are off-screen below.
Any ideas on how to deal with this?
GW

First, check all your relevant System Preferences.
Scroll bar prefs are in Appearance, mouse behaviour is in Keyboard & Mouse, and finally check the settings in Universal Access also.
If all those check out, are you running a 3rd-party utility that might affect mouse / scroll behaviour? Use Activity Monitor to see everything that is running on your machine.

HT1918 im new to the iphone charges, how can i stop my credit card from been billed so many times. too many charges for updates and down loading apps

why so many charges on the apple I phone? I'm I been charge for updates each time there comes up an update or what is really been charged for?

Welcome to the Apple Community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

Too many addresses in mail's "From" pull-down menu

i have 3 mobileme addresses, a few of aliases, and 1 gmail account. my problem is this:
when composing a new message, there are too many addresses the "from" pull-down menu, because mail includes both the .mac and .me versions of each of my aliases. so, instead of a list of 6 addresses, mail shows 10. furthermore, the addresses appear, in the menu, in a random order, making it even harder to find and select the address i need:
they display in this order:
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
- how do i get mail to stop listing both the .mac and .me versions of addresses (aliases) in the pull-down menu?
- and how do i alphabetize the list?
thanks.

i must have been really tired when posting the above. lol. obviously i meant "a few aliases" and "there are too many addresses in the 'from' pull-down menu."
i hope someone knows how to address this issue. (no pun intended.)

How much can too many imports slow inititialization down?

How much can too many imports slow applet inititialization down?
I have seen our company's sorce code for some huge applets they have written. In many, many cases, the imports at the beginning of each file are written something like this...
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;Only certain portion of these imports are actually used. Does this sort of thing really impact the applets loading speed? I know it will obviously take at least a little longer but will the user even notice?

You are not actually importing the classes, but rather making the names of the classes available.

Too many albums slows down iTunes?

I've never used iTunes to organize my massive music library, but I want to give it a try.
I don't think in terms of songs. I think in terms of albums - ripped CDs. I have over 3,500 physical CDs and FLACs I'm converting to ALAC.
I read some very old forum posts that discussed iTunes bogging down, sometimes hanging or crashing, because someone had "too large" a library. But those comments I read were several years old, obviously discussing older versions of iTunes.
Assuming that lossy compression is completely out of the question, is a person going to notice iTunes 11.1 responding slowly or hanging with that many lossless albums in his library? A drag to use?
Without resorting to multiple libraries, how many ALAC albums is "too many" for iTunes?

I think a LARGE PART of what you're dealing with is format...
I have 41,742 songs (3212 albums) and 673 audiobooks in my iTunes library with album art for ALL of it.
It ONLY lags when adding new tracks, and even that's just for a second or two at most.
BUT...
My collection is MP3 (192kpbs maximum) and M4B (128kbps maximum). EVERYTHING comes to 267Gb.
As FLAC or ALAC, you're looking at a substantially larger library that's going to be slower to update...
Updating a 23mb ALAC track's ID3 tags... takes longer than a 4mb MP3.
Updating artwork for an album of ALAC tracks... takes longer than an album of MP3 tracks.
Renaming an album of ALAC tracks... and so on.
Not being a music professional I don't NEED to have lossless music. I listen to most of my stuff through earbuds while riding. Too much outside noise to really appreciate the nuances of a studio quality rendition of Beethoven's 9th.
If you DO need that quality, the lag is a trade off.

Is there a way to not have photo stream photos save to my iphone? i have many shared photo streams hoping to not bog down my iphone space. but alas the photos are are being saved on my iphone.

Is there a way to not have photo stream photos save to my iphone? i have many shared photo streams hoping to not bog down my iphone space. but alas the photos are are being saved on my iphone.
For example. When I share a photo stream with my dad and brother and mother all the photos they are putting in the shared photo stream are taking up space on my iphone! I'll be out of space in no time at this rate.

hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book?

How to slow down too many deliveries of daily return_job?

Does anyone know how to slow down too many deliveries of dail return_job at 00:30?
I'm using following version.
$ /opt/SUNWmsgsr/sbin/imsimta version
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS hostname 5.9 Generic_122300-13 sun4u sparc SUNW,Sun-Fire-480RAbout 7,000 delivery notification messages was created by return_job in 1 minute
and then the smarthost could not process these messages and froze.

pyon wrote:
Thanks, Shane.
So, I want to control the transmission rate to smarthost, especially mails created by return_job.You can throttle back the rate at which Messaging Server attempts to send emails to the smarthost by decreasing the maxjobs setting from 7 to say 2 and increasing the threaddepth to say 32. This will reduce the number of simultaneous active connections and also the rate at which new delivery jobs are created.
http://msg.wikidoc.info/index.php/Threaddepth_Channel_Option
Also since you are using the daemon keyword you may want to try the multiple option (instead of single_sys).
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
So these combined give you the following channel definition:
! tcp_local
tcp_local smtp nomx daemon smarthost.example.com multiple remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 2 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck threaddepth 32
tcp-daemonRegards,
Shane.

VISACOM - Alloc Error using 488.2 USB-B Interface - too many open sessions

I have been having the following issue in my VB .NET RF-ATE application.... It usually happens when my program enters a measurement loop (I.E. searching for P1dB). It begins to solve for P1dB and performs about 15 cycles (sets power level on SigGen and takes SpecAn meas) and then crashes due to the following error :
As Logged in the Event Viewer :
VISA: May 13 09:45:22: Error=bfff003c,"VI_ERROR_ALLOC: Insufficient system resources/memory": ViTable::add - too many open sessions
As Logged in VB .NET :
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in RFATE.exe
Additional information: HRESULT = 8004003c
VI_ERROR_ALLOC
Not sure why its happening my code is pretty solid (or so I thought) and I believe it closes the VISA session properly after each R/W operation? (See attached). I call the same procedure to talk to the GPIB instruments over and over.
Is it possible that I am not freeing and disposing of resources properly? I have read a little about destructors in .NET etc. but I was under the impression that as soon as "Sub End" is executed that the resources were free'd up? But that doesn't explain why I would get a "too many open sessions" error occour if I am closing the session after I am finished?
Another odd thing to note is that I have created testplan scripts and loaded them into my application with literally hundreds of measurement commands and my program didn't crash then???
I am very new to VB and .NET (3 months) so I have a lot to learn but I can't understand why this is occouring. Any help is appreciated.
Attachments:
GPIB.txt ‏3 KB

Just posting a followup... Turns out I found a way to make it work! (I have been fighting this for almost 3 days!).
If you look at the variable declarations of my procedure.....
Sub GPIB(ByVal Addr As Object, ByRef Data As Object, ByVal IO As String)
Dim ioMgr As Ivi.Visa.Interop.ResourceManager
Dim instrument As Ivi.Visa.Interop.FormattedIO488
Dim session As Ivi.Visa.Interop.IMessage
I use the "IMessage" interface for the variable session.
Just before the "Sub End" is executed I use the following line to close the session :
session.Close
Which it would appear doesn't close the session properly when you use the "IMessage" interface.
So I changed the line to use the "IVisaSession" interface instead :
Dim session As Ivi.Visa.Interop.IVisaSession
Now when the Close method is executed aparently it closes the session properly because my program isn't crashing at all!
I was using VISA COM 3.0 Reference object (GlobMgr.dll).
If anyone has any insight on this please do share.

Mail slow down; too many messages?

Mail (4.4) has slowed down a bunch here. I click on an unread message and it takes a good 5 seconds (or more) to show the message and any pics in it. (most of the time it seems to display the wrong message for a quick spell, then go and wait on the correct message)
I do have 9 accounts (and 3 dead ones) Most IMAP and some POP. I do sync and also keep/move a bunch to the On My Mac section.
Is there a way to find the total # of messages in Mail? (not just a selected folder)
I might just go the mailSteward route and keep Apple Mail lean and mean.
Message was edited by: Suds&Hops

I wish I could offer a solution ... I'm posting because I'm also suffering from brutally slow search in Apple Mail. I have multiple mailboxes with lots of messages using IMAP and POP with Gmail but must it really take (literally) a minute to type something into the box and get results? Even more frustrating, typing into the box is slow ... each letter takes 5-10 seconds to apppear!
I tried "vacuuming" my mailbox according to instructions I found online. That made it a little smaller but didn't help noticeably. My sense is that the indexing is screwed up or I simply have too many messages and it's choking on it.
I'd love anyone's input! I'm a recent convert (back) to Mac OS and I'm just not sure how to begin fixing this problem.
Message was edited by: jamiemex

Too many type parameters for interface

In JDev 11.1.1.0.0, I do a compile and I get 65 files with errors saying
Error: too many type parameters for interface java.util.Map<java.lang.String, java.lang.Class<?>>
but the class doesn't use the Map object.
Other files get it for the Set object.
Note that no line number was given as part of the error message.
I installed the JDev 11.1.1.0.0 base from the zip file.
What's wrong?

Hi,
And you do a compile on what exactly, Please post one of the erroneous class' code using the code within bracket tag so that we can help you.
Regards,
~ Simon

Does too many apps slow down iphone's performance?

does too many apps slow down iphone's performance?

31 apps is nothing. I have 130 apps XD. Then again, I'm using an iPhone 4S which has more RAM compared to the 3GS. RAM is everything when it comes to speed. To use the app switcher, press the home button twice quickly and a list of your recently opened apps will appear. Then hold down on any app and all the apps will go to wiggle mode (like they do when you're deleting apps. Now, simply tap on the red icon that appears at the top left corner of any app you don't want running in the background. This will free up RAM and should make your phone faster.

Too many docked ScriptUI panels bog down interface?

Similar Messages

Maybe you are looking for