Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
Who can tell me what does this error message mean and how to elinate this error message ? also how to deal with 100% CPU utilization ?
Thanks.

Hello,
i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
i also have a could of questions if anyone can help
the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
thanks in advance.

Similar Messages

After upgrade the firmware, it can't be initialize

Hi,
I use PCI-7344 and UMI-7764
and upgrade the motion software and firmware to 7.2 version
but I can't be initialize the motion card in MAX
the error code is -70038
由 ycw7 在 03-25-200601:53 PM 上編輯的訊息
====================
●LV Version：LabVIEW7.1
●OS：WindowsXP(SP1)
●Hardware：PCI-7344, PCI-6602, PCMCIA 6024E
Attachments:
error.jpg ‏122 KB

Hey ycw7,
After getting this error, I would recommend that you take the board out of the PC, uninstall the NI-Motion driver software, and make sure that any motion configuration files or any files regarding motion get deleted. Then do a reinstall of the NI-Motion 7.2, place the board back in the computer after the installation is complete, and this time try the board in a different slot, and see if you can initialize the board. If this doesn't work, then if you have another PC that you can install Motion 7.2 on, try it in another machine and see if you get the same error. If you still get this error, then you might want to try reverting back to an earlier version of NI-Motion, like 7.0, and see if you can get that to let you initialize the board. Finally, if none of these work, then you should contact National Instruments and work with them about what to do next. Let me know if you have any questions. Thanks, and have a great day.
Regards,
DJ L.

Slow system and too many details after upgrading to OS/Lion

This MacBook Pro is my right hand, I was doing so great with Snow Leopard, Now everything takes twice longer. I cleaned up, reseted, reinstalled softwares, etc. same.
Too many details that doesn't work correctly.
-Safari constantly needs to be loading. Some times Firefox.
The track pad cant keep open a display box with a long list, once you try to scroll down.
-Preview, i used this app a lot, safe me time, DUPLICATE? instead of SAVE, i don't see the purpose. After editing images and safe them, gamma, color patterns and light appear distortion.
-iTunes volume doesn't comeback after using Skype or another app, remains low.
-Airport takes a bit longer to find a local network.
-There is not an extra space for the left and right scroll bottom on the finder window, sometimes this one disappear but mostly remains which makes it pretty tricky to open the last file at the bottom of the list. because the scroller is on front.
-External Drives, takes longer to connect or disconnect them.
Suggestions before i reinstall Snow Leopard.

guizz,
it sounds like you have come across the mother of all problems but i would like to help as much as i can.
first of all, i noticed that it took a few days after installing lion before my system was back to the full stride it had while running snow leopard give it some time and a few updates and lion should speed up because components such as ram take time to adjust.
the duplicate thing in preview is a new thing that came out with versions, one of the many new features in lion. i think it takes the place of the SAVE AS... command and you should still be able to save using the old command-s keystroke however part of lion includes an autosave feature so you really never have to worry about saving your work.
i personally cannot speak for safari or firefox even though i have both because i use google chrome as my web browser you can always give that a try.
in the system preferences under the general settings option you can change how the scroll bar is displayed on the screen.
i would suggest searching for other people who have had similar problems with itunes to try and find an answer
as for everything else your system may just need time to adjust to lion
good luck hope this helped a little

N73 - Another Problem after upgrade the firmware t...

Except the slow contact search problem (solved by Unplug the battery), I still suffered from some application install problems.
1. Whenever I restart the phone, a message 'Installing' always poped up, and the phone not responding for around 2-3 minutes. And then an error message 'Unable to complete ....' prompted.
2. The K-Mobile Client application losted after upgrade, and I tried to reinstall it , but resulted error by 'File corrupted'

Usually that annoying installation process in the beginning can be removed by deleting that installation file in MMC>\Private\10202dce . Most of them does not have the real title of the application. To delete the right one, you need to go to the application manager first and look at the title of the application that cannot be installed nor removed. Ones you know the titles, plug in ur phone to ur computer and browse MMC>\Private\10202dce , some title of the applications from the application manager should be listed there. Delete whatever you find is listed "not installed" in application manager (app cannot be installed or removed), but first make sure to make a backup of it somehow just in case you make an error. After you delete the file/files restart ur phone. The annoying installation process should not appear anymore. Note that by just removing that file may not fully remove the files it created. For advice, if you install applications in ur phone make sure you have backup of them stored in ur computer so that if the installed applications in ur phone stops working properly all you need to do is to reinstall using the original/backup sis files.
- Is this a Signature? -

Choppy video streaming after upgrading E4200 firmware to ver. 1.0.03

Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?

You mentioned in your post that you upgraded the latest firmware. So after upgrading the firmware did you reset the router? It is recommended to reset the router after firmware upgrade. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
After the process reconfigure the router as per the ISP setup.. Then try to do the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
         4] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

ISA550 After upgrade 1.2.17 many error messages in the log

Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
Claus

Hi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

My iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194

my iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194 ... now my phone is not working ... every time an error 3194 ... I can not update ios and drop naturally I do not Pogue. hosts cleaned, cut off the antivirus ... did everything I recommend in this case ((what do I do? (
on other machines the same ...

Some additional suggestions here that may help if you haven't tried them:
http://support.apple.com/kb/ts4451
Regards.

Automation error element not found in vb6 2147319765 after upgrading the os

Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneer

Double post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin

I find Mail under Mavericks to be weird. Are others having this same difficulty. "Upgraded" to Mavericks last week, after updating the firmware to my WD external HD.

I find Mail under Mavericks to be weird. Are others having this same/similar difficulty? "Upgraded" to Mavericks last week, after updating the firmware to my WD external HD.

"Weird" needs further explanation.
Google's highly nonstandard IMAP implementation is weird, if you're using Gmail, though Apple bent over backwards to accomodate it. Other than that, what do you mean by "weird"?

CS3 Camera Raw Too Many Files Open at the Same time alert!!!

Please help me. I keep getting this error message in Camera Raw that says there are too many files open at the same time - but I only have 100 open:( Please help - I was getting this error with CS2 and thought upgrading to CS3 would fix it and it didn't!!!

> "10 or 100 - you can quickly go through a stack of images in ACR and make any desired changes you want. Whether making the same or similar adjustment to similar files, or making radically different adjustments to different images as appropriate".
I've done this with far more than 100! I think my maximum is 425 raw files, invoking ACR from Bridge without Photoshop even loaded, and it worked well. (I've also done 115 JPEGs in order to crop them under extreme time constraints).
It can be very slick. For example, if I use a ColorChecker a number of times in a shoot, it is easy to select just the set (perhaps 100 or so) that a particular ColorChecker shot applies to and set the WB for all of them.
Furthermore, in case people don't know, you can set ratings on raw images while many of them are open in ACR. (Just click under the thumbnail). It isn't as powerful as Lightroom, but it is not to be dismissed.
I suspect that it is possible to apply sensor-dust-healing to lots of images in the same way, and certainly it is easy to apply presets based on various selections.
Perhaps with AMG (Adobe Media Gallery) it will be sensible to use the above capability to process 100s of raw files, then create a set of web pages for the best of them, in not much more time than it would have taken in Lightroom. I judge that Lightroom is the "proper" tool for the job (perhaps after 1.1!), but Bridge+ACR can go a long way.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

CS5 can't preview the fonts image after upgrade the OS X 10.10.1

My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

This program is stopping because too many errors have occurred.

I'm putting a game through QA and they found that the Director Projector throws the following error in Windows 7 when the user switches their windows user.
"This program is stopping because too many errors have occurred."
To test, I created an empty director projector that does nothing but repeat frame 1 and it throws the same error. Any thoughts on what could be causing this?

Has anyone figured out how to fix this problem? It is happening to me in a kiosk that runs 24 hours a day. If I use Log Me In to check on the kiosk remotely, it sometimes throws this error. Log Me In automatically switches to a different user account. After I disconnect from Log Me In session, the error occurs, I suppose when it switches back to the original user.
This is a big problem, any help will be appreciated.

About ORA-00600 [kdiss_pin_hdr: too many] error

I meet a 'ORA-00600: ... parameter: [kdiss_pin_hdr: too many],[],[],[],[],[],[],[]' error when executing:
set transaction use rollback segment rbs_large_01;
select
CUST_NO||','||
TEL_NO||','||
ADDRESS||','||
ADDR_CODE_PREF||','||
ADDR_CODE_CITY||','||
ADDR_CODE_ZONE||','
from
CUSTOMER
where
     ADDR_CODE_ZONE = '000';
My system:
Oracle9i Enterprise Edition Release 9.0.1.2.0 - Production
With the Partitioning option
System name:     SunOS
Release:     5.8
Version:     Generic_108528-21
Machine:     sun4u
The sql should output about 70,000 rows, but it's stopped with the ora-00600 error after output 40,000 rows.
The table has 10,000,000 rows
rbs_large_01 is 512M - 2G
tempory tablespace is 2G
What's the error mean?
How can I resolve or avoid it?

Hi
i found in bug database:
bug 1827660 which is fixed in the 9.0.1.3 patchset
so, i mentioned use the latest patchset
lajos

WPA MIC errors after upgrading WLC to 4.0.217.0

Hello all,
I have an internal wireless network with two 4404 controllers and 129 access points.
I ran into a problem after upgrading the controllers from 3.2.40.0 to 4.0.217.0 involving a few APs displaying WPA MIC errors every couple minutes.
All of them except for one have stopped yesterday, but one of them is continuing to do so.
Has anyone ever experienced this while upgrading to this version, or have any tips to prevent/stop this?
Thanks.

Hi jpeterson6,
yes i have experienced this as well, it seems to be a particular client attempting to connect through that AP. From what i can remeber i had to check the security details of the client (WPA TKIP) which were wrong. not too sure if this might also be your problem.
I will have a look as soon as i can and report back if i find out anything more:
If it is not, try and grab a few more details and report back
Cheers
Mark

Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

Similar Messages

Maybe you are looking for