Too many forum sites - plesae spilt away into PE7 and older

Hi Im not sure who is the person to do this but can you split the sites into PE7 and PE older. People with PE 7 have specific issues (ie AVCHD) and its too much wading through hundreds of threads and old sites dealing with issues in PE3 etc

andrewtirian,
The Premiere Pro forums are split by version number, and as Steve points out, much is common to all/most versions. The same is true for the FAQ's at the top of this forum. That's why I suggest that any poster with a question that can be answered by an entry in one of the FAQ's read ALL of the FAQ's, not just the one for their particular version. There is a lot of non-version specific info in all of those.
I find that if a poster will state the version # in their post, a lot of confusion, and episodes of "20 Questions" can be eliminated. Roughly 90% of all questions transcend versions and are general. AVCHD is one, that IS version specific, as it was recently added.
Now, www.muvipix.com does break PE fora into version-specific headings. Still, most questions apply across most versions. Were Adobe forums to split, I'd suggest a finer deliniation, like "AVCHD," or "HD Video" only questions being broken off to a separate sub-forum.
Hunt

Similar Messages

Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help

Too many archived documents are suddenly extracted into BW

Dear All,
I am not person of Finance but I will try to provide necessary details here.
We have archiving in place in ECC. For a specific document, if I go to FB03 for the document, it shows the information but with message that 'Document is already archived'. Document is related to year 2011.
Now, suddenly too many documents were extracted last week spanning from year 2009 to 2011. When I check in 'Document changes', it shows that last change was done in 2011 only.
I want to know what possible change could cause these archived documents to extract again into BW.
or any pointers are also welcome.
Thanks,
Purvang

If you bought it from Apple, you are covered by one year of AppleCare, which includes three months of free phone support, for any problem. You should take full advantage of that. It sounds like you may have hardware issues (the audio jack) but a lot of your items sound like a matter of changing preferences or display settings - Apple can help with this, as can a local friendly Mac consultant.
For example, you mention that you get a "screen-wide mass of writing". Do you know what application you're opening the file in? Many Mac apps have full-screen mode, which sounds like what you describe, and you can get out of it by moving your cursor to the top right of the screen until you see the menu bar appear - there's a blue icon with two arrows, and clicking this will get you out of full screen mode.
QuickTime does not play all formats of video. Try an alternative video player such as VLC. (http://videolan.org/VLC)
Hope that helps somewhat.
Matt

HT1212 how can i reset my password on my ipod touch someone made too many attemps now its saying connect to itunes and when i connect to itunes its saying unable to connect because the phone is locked

how can i reset my ipod touch if someone made too many passwords on my ipod touch

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Can't add new icloud account to iPhone says that I have too many accounts please help! Forgot old username and email

I Made a new icloud account bc forgot my username and email and now I can't access bc says I have too many accounts on phone please help!

If the messages says the maximum number of accounts have already been created, you will not be able to create a new one on that phone. All you can do in that case is either reuse one of the accounts previously created or create your new account on a different iOS device or Mac, if you have one.

Too many web sites that I go to do not work with your latest version. How can I use a previous version? Right now, I have to switch to IE because I do not upgrade it until I absolutely have to.

I have to work with a lot of company web sites that are slow to adopt new browser features and expectations. The end result is that when Firefox updates my browser automatically, I frequently find myself broken, and in some cases, simply denied access, for having an "unsupported" browser or browser version. I would like to be able to open a previous version of Firefox, so that I can access that web site. But it appears that when you update, you remove/replace the previous version(s), and I am forced to use another browser.

I am currently using HP Simple Pass version 6.0, and it had been working like a dream until Firefox recently upgraded to v. 30. Now it doesn't work at all :( The current software won't have anymore updates (last one in 2013), because the omnipresent Apple bought Aunthentec (the company that makes (made) Simple Pass) back in 2012. Dear Firefox, please update whatever you have to to make the 2 compatible again, or I won't be able to use Firefox anymore. :(

How do I reset my iTunes when I have answered security questions wrong too many times. It says I am locked and I need to reset but not how to do it.

I am not sure what my kids have done but after several attempts it says I am putting in the wrong answers to my security questions and now has locked it. It says I need to reset but no clue how to.....can anyone help

Hello Racheljez,
I would be concerned too if I was not able to access my Apple ID. I found some resources that I think will help.
First, I recommend reviewing the following article for steps in resetting and updating your password to gain access to your account:
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
http://support.apple.com/kb/TS2446
If you are not able to gain access to your account after following the steps in that article, I recommend using the following link for additional assistance in accessing your Apple ID:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

BPM : too many alerts in a process step - how to remove older alerts ?

Hello
One question about Business Process Monitoring :
We have too much alerts in a process step, so it takes 20 minutes to display them.
How can we reduce the number of alerts in this process step ?
Thanks in advance.
Regards
Fred

It worked !!
Thanks John for your valuable inputs.

HT1212 My iphone5 has been disabled for 22 million minutes as the password was entered wrong too many times. I have forgotten my password and when i go onto itunes it says i need the password even to restore the phone. even when i use the hold button

how do i disable the phone if its not letting me restore it any way without the passcode and i dont remeber it

Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

New MacBook came with too many ilife discs, what's this about? and back up?

I'm a new user, and not a computer conoseur.
So, I got my macBook with max os x and ilife , ofcourse.
Now, when I pre-ordered my mac from the Apple store, I got other applications with it, .mac, office student edition, apple care, etc.
So, when I went to pick it up, everything was in a bag ready to go. And besides all my added appliations packages, there were 3 iLife packages. ya know, the little CD size software boxes you can purchase for computers.
But, now learning that my iLife info is included in the 2 Mac OS x discs that my MacBook comes with, what are these 3 iLife packages all about? is it a mistake? All the iLife I'll ever need is already on my computer and on my 2 mac os x discs right?
and how do I start my 30 day trial iWork?
and if I want to custom install my iLife, to get rid of stuff (just learning about this from this discussion board), by MacBook guides tell me to Back up my essentials/files first. How do I do this? and is it necessary? do I have to Erase and install everything? can't I just erase some stuff, like extra languages. And if I erase some stuff, can I add it back on later? And is there any iLife applications on the discs, that don't come pre-installed with my MacBook?
and what the heck is a destiniation disc?
thanks,
pre-mature user, jgsboston

Welcome to the discussions!
All Macs come with iLife pre-installed, so if you bought for an received 3 extra boxed copies you should return those for a refund.
If you do an erase and install you will still have a copy of everything that came with your Mac on your install disks. You will be able to reinstall all that if you want to.
If you want to do this out of the box, then you do not have any data or files to backup, so don't worry. A destination disk is simply the disk that you want that data to be backed up to.

"Too Many Cards" message

I didn't really know for sure which section of this forum to post this problem, so hopefully this is close.
I keep getting the error message "Sorry, Too Many Cards. Please toss away any you're not using... etc." even though there are no cards open, and it has been a problem for several days.
It's a big problem because it won't let me download updates, view the internet, or even make calls sometimes.
Sometimes it fixes itself when I turn the phone on and off, but sometimes it goes on for up to an hour and it's very annoying.
I'd appreciate any feedback that might help me with this bizarre problem!
Thanks!
Adie
Post relates to: Pixi Plus p121vzw (Verizon)

Hopefully this isn't a silly question, but by "turn my phone on and off" do you mean just hit the power button put the phone to sleep and then hit it again to wake it up? If so, then you need to reboot the phone. That will solve the problem, at least until you've opened enough of the right apps for the problem to occur again.
Go to this page for general troubleshooting tips, including how to reboot your phone: 6Ts of Troubleshooting webOS

Too many open socket connections causing ColdFusion to crash?

I’m currently working on an e-commerce site which sends and receives information to/from the client’s order management system via XML over a TCP/IP socket. It uses a very old java-based custom tag called CFX_JSOCKET (which appears to have been written in 2002) to open the socket, send the data, and get the response. The code that calls the custom tag and sends/receives data from the OMS pre-dates my working on the site, but its always worked, so I haven’t paid it much attention.
Back in the summer of 2009 we started experiencing issues with ColdFusion (v.7 on Window 2003 at the time) locking up on a more and more frequent basis, until it ultimately became a daily issue. After extensive research we narrowed the issue down to the communication between the web server and our client’s order management server. It seemed the issue with ColdFusion hanging was either related to there being too many connections open, or to these connections hanging and resulting in dead threads. This an educated guess based on a blog post I’d seen online, not actual monitoring of either CF or the TCP/IP connections. As soon as we dialed back the timeout on the CFX_JSOCKET tag from 20 seconds to 10, the issue disappeared, so we left it at that and moved on.
Fast forward to this January. The site is hosted at a new location, on a 64-bit Windows 2008 box running ColdFusion 9. Over the years traffic on the site has continued to grow. The nature of the clients business means that August and January are their business times of the year (back to school for college kids) and in January ColdFusion once again started locking up on an almost-daily basis.
One significant difference is that the address cleansing software that previously ran on the box and was used to verify shipping addresses is not available for 64-bit, so when we moved to the new server last summer, that task was moved to the client’s order management software and handled via XML like all other interaction with that system. However, while most XML calls to that server (order input, inventory check, etc) take under a second to complete, the address cleansing call regularly takes over 5 seconds to return data, and frequently times out.
Once we eliminated the address cleansing call from the checkout process, ColdFusion once again stopped locking up regularly. So it appears that once again it’s the communication between the web server and the order management server that’s causing problems. We currently have that address cleansing call disabled on the web site in order to keep ColdFusion from crashing, but that’s not a long term solution.
We don’t have, nor can I find online, the source code for the CFX_JSOCKET custom tag, so I decided I’d write some CF code utilizing the java methods to open the socket, send the data, get the response, and close the connection. My test code is working fine (under no load). However, in trying to troubleshoot an issue I had with it, I started monitoring the TCP/IP connections using TCPView. And I noticed that all the connections to the order management server, whether opened via the custom tag or my new code, remain open in either a TIME_WAIT or FIN_WAIT2 status for well over 2 minutes, even though I know for a fact that my new code is definitely closing the connection from the web server side.
They do all close eventually, but I’m wondering 1. Why they’re remaining open that long; 2. Is that normal; and 3. If all these connections remaining open could be what’s causing ColdFusion to choke.
Does this sound plausible? If so, does anyone have any suggestions/recommendations about how to fix it? My research seems to indicate this might be a matter of the order management system not closing the connection on its end, but I’m in way over my head, and before I go to client and tell them it’s their OMS causing the issue, I need to feel a little more confident that I’m on the right track.
Any help or advice would be very greatly appreciated. And thanks for taking the time to read through my long-winded explanation of the problem.
Set-up details:
ColdFusion Version: 9,0,0,251028 Standard
Operating System: Windows Server 2008
Java Version: 1.6.0_14
Java VM Name: Java HotSpot(TM) 64-Bit Server VM
Java VM Version: 14.0-b16
Thanks,
Laurie

Hi Laurie,
Not aware of custom tag called CFX_JSOCKET. I guess the process you described very well is consuming a resource then you are getting a problem. Trick is what parameter to adjust. Perhaps you are running out of one the threads in CFadmin > Server Settings > Request Tuning.
I expect if you enable CF Metrics logging where you can log the threads and other resources then you can find out which parameter needs adjusting. Let me know if you want some details on enabling CF Metrics. Perhaps others will have much better idea than me and help without the overhead of logging.
The other interesting thing is you are using CF9.0.0. Do you have some reasons for not being on updater1 CF9.0.1?
HTH, Carl.
PS I posted before however seems to have gone, just hope does not come back and then I have posted twice.

I have been blocked from my own ITunes songs because my apple ID associated with too many devices

I cannot access songs from my own iTunes Apple ID because it says my iPhone has been associated with too many devices. I have to wait 90 days to access my own songs on my iPhone. Here is what happend:
1-Our family moved. So, with the address change, the credit cards on all of the apple ID's would no longer work because the other users had our old address. (I have 4 users in the family).
2-My family started calling me while I was out of town complaining that purchases were rejected. This was because our address had changed and it no longer matched.
3-I tried to walk them thru the process of changing the home address on the credit card, but they couldn't do it. They assured me that they were doing it correctly and were still rejected.
4-So, being the techie of the family, I simply logged into each of their iTunes accounts from my iPhone while I was out of town and made the address change. While I was in their accounts, I noticed they didn't have automatic downloads and iTunes match and stuff. So, I changed it so it would work for them when they logged back in.
5-I go back to log into my own account on my iphone and I cannot access my own songs on the iTunes cloud for 90 days!!!! This is quite disappointing.
How can I get this corrected? I tried to reset user settings (not a erase and reset). I figure it's not my phone, but my iTunes account thinks I'm doing something sharing-wise.
So, in summary, when I am on my iPhone and I go to my iTunes library and click on a song (that I have paid for) with the cloud and down arrow beside it, it's rejected. It says that I have too many apple id's associated with this device and I must wait 90 days. It counts down each day.
I just want access to the music I paid FOR!!

Thank you-I will contact support.
No, I cannot wait 90 days.
Let me restate what I have to endure, even though I own the music and have paid for iTunes Match:
I cannot access my purchases-zero-at all
I have to listen to never ending McDonald's latte commercials and progressive insurance. I have now banned both of those annoying businesses and will not make purchases there.
In summary, I have given apple my minded, and have zero to show for it.
Ps-you get to hear the McDonald's "love hate commercial" every 2 songs on iTunes Radio. I have substituted the words where I hate McDonald's and love when the commercial is over.

Photoshop CS5.1 Extended: Could not complete your request because there are too many Files Open

I saved a file last night and now this morning I get an error message stating: "Photoshop CS5.1 Extended: Could not complete your request because there are too many Files Open. Try closing some windows and try again.". I've rebooted the system and made sure Photoshop was the only program running and that there were no other files open prior to trying to open my file. I increased Photoshops ram usage, checked the OpenGL settings, 3D and VRAM settings, cleared my temp files and am at a loss for opening this file.
System Specs:
Win 7 64
6 core I7 processor
32gb Ram
3GB VRAM
600gb free space on 7200 rpm drive
File specs:
1 3D object replicated maybe 5 times (yes, I should have rasterized them, and will do that to 4 of them if I get the file open)
Maybe 8 textures
Not sure how many total layers.
Is there anyway to get Photoshop to reopen this file?

No, more VRAM is useless. I had the same thought as you so I tried with a friend's computer with 3GB of VRAM for 8GB RAM (mine has 1GB VRAM for 16GB RAM). Still got the same error message. Sorry guys but our files are lost until Adobe fix the error in Photoshop code. I hope in the future they will find a way to either fix this error or give a clear limitation, it is really a shame such a dangerous problem exists and persists for more than 3 photoshop gen.
Still you may be able to have at least a flat image of your latest file by trying to open the file as smart object. I started my work over by doing that. Not a lot but better than nothing.
However for my new file I am trying something different : Each time I think a 3D file is final, I do not rasterize it but make it into a smart object and save the new smart object into a single separated .psd file. If any change is needed I can still edit all of my 3D objects by opening them separately. So far it works, the global file is lighter with few to no 3D objects inside but I will not say it is a 100% no-risk method yet.
Last advice I can give everyone : Before closing the file you are working on, save it as a copy (File / Save as... and check 'As copy' in the options below) then with your main file still open, try to open the copy. You may need a lot of memory if your file is heavy but still if the dreaded error message appears when you try to open the copy then remove or rasterize some 3D objects in your main one. Save again as copy and try to open the copy until you do not get the message anymore.

JDBC receiver error - ORA-00913: too many values

Hi all,
Facing a strange issue with proxy-jdbc issue.
Message fails with error - ORA-00913: too many values
Handling the missing fields from the source with - Empty String in the comm. Channel
Empty string handling works fine - whenever there is no value coming form souce, null is inserted into the field value on the DB.
Trying to insert the same data manually, it works fine. But gives this error END2END.
When testing END2END, if the field values are made couple of chars less in length, that works fine....fails with the actual data.....seems to be the issue with the field lenghts on the DB.
Increased all the lengths by 10 chars..still does not work.
Except the key fields of the DB table, all others are nullable.
Is there anything else, I am missing...
Note: Generally, ORA-00913: too many values comes when the number of fields and the number of values donot match in an INSERT/UPDATE statement.
reg

Hi
When testing END2END, if the field values are made couple of chars less in length, that works fine....fails with the actual data.....seems to be the issue with the field lenghts on the DB.
Increased all the lengths by 10 chars..still does not work
Well the error you mention generally occurs when the insert statement has more fields mention than in the table .ie you are mentioning extra field .aur this error is due to the field lenght of any of the filed you had to check in the oracle itself by using the command DESCRIBE there you ll be able to see the field lenght of each and every field .
hope your problem got resolved :
Regard's
Chetan Ahuja

Too many forum sites - plesae spilt away into PE7 and older

Similar Messages

Maybe you are looking for