Too many issues with upgrading to OS6 for BB9700 - Going back to OS5

I upgraded to os6 severay days ago. Here are the pros and cons (from a non technical perspective)
PROS:
* New look of the calendar and text .... easier on the eyes with different colors
CONS:
* Don't know why but after only a few days, I have to reset the BB 4 to 5 times today. It just locked up and I had to pull the battery.
* THE KILLER - BB developer decided to force the browser to go to my company's network BES, instead of my cellphone carrier's 3G network. Because the company puts so much restraints and limits on accessing the internet from their network, so many websites are locked and off limit.
In the past w OS5. I had 2 icons of browsers, one for the company's browser and one regular browser. I can go to the advanced options to direct the regular browser to go my cellphone carrier 3g network. It worked so well.
Now with OS6, the developers force users to go through their company's BES network. That is crazy. I pay for the Blackberry and the monthly cell phone and internet data plan, and now I cannot use my phone /internet the way I choose .
If the OS6's developers do not listen to users' complaints on this serious issues, then in the near future as my company allows us to access their email and outlook contacts via droid and Iphone, I will be the first to say good bye to Blackberry.
How many users have the same problem as I?

You are confusing RAM with hard drive space - you appear to have the standard amount of RAM (the memory a computer uses to run apps). 4 GB is fine, but considered a minimum - more would be better.
As for the hard drive space (that is the space you have available on your hard drive to read/write): you need 8 GB minimum to install Mountain lion and, as a general rule, you should maintain a minimum of 10 - 15 GB of empty space at all times - more is better there as well. You can find out how much space you have by highlighting your hard drive icon (Macintosh HD icon on your desktop) and control click on it. In the popup window, choose Get Info. Then post the info showing such as Capacity, Used, and Available.
FWIW, Mountain Lion will continue to show in your Purchases because it is available for you to download again should you need it. You obviously have it installed if it shows that you are running 10.8.3 - which, but the way, is not the latest version, so run Software Update: we are up to 10.8.5.

Similar Messages

Ipad2 and Ipad3, cannot see Ipad2 user - worked ok for months, now broken. Like to know how to upgrade Ipad2 to IOS 5.1.1 (too many issues with IOS 6 - consider too risky)?

I have been using Facetime successfully for months to communicate with my elderly mother in the UK (I am located in Canada)? Today we tried Facetime and we could hear each other but I could not see her. She could see me ok however.
As I wasn't sure whether the problem was with my iPad or hers I made a FaceTime call to my brother-in-law in the UK, this call worked perfectly. I then tried a Factime call with a friend in Canada and it also worked fine.
My mother could see herself in the small window so we know that her camera must be working.
Here are the IOS versions for the four IOS devices used in these tests..
My mothers iPad 2: IOS 4.3.5
Brother-in-law's iPad 3: IOS 5.1.1
Friends iPhone: IOS 6
My iPad 3: IOS 5.1.1
My questions are as follows:
Q1/ Has anyone heard of Facetime problems between newer and older iPads as a result of Apple rolling out IOS 6 recently?
(maybe there have been some changes to the FaceTime servers as part of the IOS 6 rollout?)
Q2/ Is it possible to update my Mothers iPad 2 (IOS 4) to IOS 5.1.1 and do this without using a computer? (I would prefer her to update to 5.1.1 and hold off updating to 6 because of all the issues I read of users having problems with 6, including FaceTime issues)
My mother is in her 70's, and has no computing device other than her iPad. She can just about manage to figure out how to use the basic features of her iPad. Therefore the update process needs to be very easy and straightforward otherwise she is likely to get very confused, very quickly!
Facetime has been brilliant for my mother and keeping in touch with her son, thousands of miles away, we would really like to get Facetime working again.
Can anyone help?

You will not be able to block IOS 6. You can try blocking it with a webfilter or firewall but if the students take these home or connect to another network or iTunes they can get it that way. You will find that the vast majority of all apps will work with 6 or have been updated to work with it by now.

Whats up with the video card issues with Photoshop CC? I am going back to CS6.

Stop messinn up my workflow Adobe! Your upgrades are supposed to work.

Would you care to be more specific or do you really not want any help with a potential problem?

ITunes 9/iPod OS 3.1.1 combo has too many issues/bugs

After upgrading to iTunes 9 and Touch to 3.1.1 I am having too many issues:
iPOD TOUCH:
1. Everytime I launch music, it displays "upgrading library" message and takes eons (5 minutes) to show the library
2. Playlists don't work: most playlists show tracks in random order not matching iTunes, and also with total number of tracks different from iTunes. This had rendered most playlist as useless. Wondering when Apple will fix it.
iTUNES:
1. Much hyped arranging of applications through iTunes doesn't work. I took whole lot of time arranging the applications in iTunes virtual desktop, but after syncing I found entire arrangement lost both in iTunes and in Touch. I did it many times, but with the same unwanted result.
Any help?

That's what i used to tell people. but I up(down)graded to version 9 itunes, and version 3.1.1 for the ipod touch and now i can't restore the ipod because itunes can't connect to the software update server. why do i want to restore the ipod touch? mostly because every extra app added refuses to work! nothing launches. even apple's own remote app can't push through this mess the updates have created.
I'm on a mac. 10.5.8 everything used to work just fine before these updates. What hurts even more is that i actually had to pay for the touch 3.1.1 update as well, and now i've got a non-functioning ipod. cheers apple. How about they release an update to reverse the wonderful job this latest version has performed... Or at least a single company communication as to what is wrong, and how to fix it, rather than a dozen different suggestions in forums and non-existent support documentation!
rant now over. please just fix it apple.

Many issues with WRT160N v3 (Windows 7 related?)

Ok so here's the story.
Several months ago I purchased a WRT160N v2. I was connecting four devices. 1 XP machine, 1 Vista machine, 1 PS3, and 1 Xbox 360.
The XP machine is using Wireless-N PCI Adapter model no. WMP300N. The Vista machine is using a Wireless-N USB Network Adapter with Dual-Band, model no. WUSB600N
The process was fairly straight forward and I was successful in getting everything set up correctly. It worked great for the most part barring any unexpected wireless crashes.
A few weeks ago I accidentally bricked the router when trying to upgrade the firmware. It was my mistake and I should have been thinking but it happened. I was able to get a replacement from Linksys and I received the WRT160N v3
Sadly this router hasn't provided me with the same easy of installation.
Right now the situation is a little different than before. I am running a Windows 7 machine right now. It's up to date and working great. I haven't noticed any issues with the OS other than some random driver issues here and there.
I first attempted to just plug the router into my modem to see if my Windows 7 machine would automatically see it and connect. To my surprise it actually did. It connected and I was able to get online.
But here's the problem, my speed when connected was horrible. It would range anywhere from 75-1Mbps. For comparison, when on Windows XP I would get a locked 130Mbps. In addition to that, the LAN connection will not work. At all. It see's the connect, it shows it's connected and online. Then when I attempt to get online it fails and knocks me back to local access only.
I then attempted to set up the connection using the included disc for v3. This was problematic due to compatibility issues I assume. It didn't fair any better.
The final thing I did was plug my computer directly to the router without connection to the internet and disconnected from the Wireless and attempted to upgrade the firmware. THIS PROCESS WAS SUCCESSFUL. It did not fail and brick the router. I did it correctly this time. To repeat, this did not brick the router.
Ok, so I guessed it was due to Windows 7? I called Linksys up and they said they were unable to support the unreleased beta OS. I'm fine with that.
Next I decided to see if I could get my Vista machine online. With this I decided to run through the setup process that comes with router. I followed the steps to the T. Doing exactly what they told me to do. When it finished it showed it did have connection to the Internet. When the Linksys Easy Link Advisor started up and attempted to get me on wireless, it failed. It shows it lost connection and was unable to regain connection. Attempting to statically assign myself an IP address fails as well.
Using the LANA port with this router on the Vista machine works perfectly.
Right now I'm falling back to a very very old router. It's a Linksys Network Everywhere NR041 wired router. This router works rock solid with my Vista, Windows 7, PS3, and 360 all plugged in and only has some minor overheating issues (common with this model).
My questions:
Does the WRT160N v3 have issues with Windows 7?
Why exactly am I have so many issues with it at all?
Are there issues with my wireless card and Windows 7?
Would the compatibility issues cause the LAN connections to fail between the router and my Windows 7 machine?
Is there a better router solution for me?
I would prefer to not have to revert back to Windows XP as I am enjoying Windows 7.
I would appreciate any help I can get as I'm fairly unhappy with these two products so far.
Thank you.

There is a compatibilty issue with the Wireless Adapter and Windows 7 as it seems there are no specific Windows 7 Drivers to install the adapter...So basically that could be the reason why Windows 7 keeps loosing the Wireless Connection...
Also remember to reset the router to factory defaults after any firmware upgrade, then setup the router again from scratch. If you have not done this since your last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
To reset the router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Don't use the CD to re-configure the router, instead do a manual setup...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Also adjust the Wireless Settings on your Router -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Message Edited by Carrot on 07-14-2009 04:34 PM

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Font Issue with Report Generation Toolkit for Microsoft Office

I have been using this toolkit for only a few days now, but I just have to get this issue off my back. When developing a toolkit it would be a good idea to use the same cluster to represent fonts in ALL places. If you look at "Excel Set Graph Font" vs. "Excel Easy Table" they take two completely different clusters. Why? I don't know, but it is *very* annoying.
How could something like this slip through the cracks? Is there some reason why there is this discrepancy? From my perspective as a software engineer I see no excuse, but maybe someone else can justify this oversight for me. I just hope that I don't find any more issues with the toolkit...
Naveen.

Naveen,
what you said is true when dealing with same kind of objects, but in this circumstance, different cluster defines the font of a differnt object. For example, you may not want the user have as many options with defining the font for the X Y axis title as that for defining the text in the table. This is ture when you want your generated report to have similiar styles.
But this is certainly something we will think about, thanks for your constructive suggestion,
XD Gao
Application Engineer
National Instruments

Too many tables with EXECUTE permision

Hi Gurus,
I found that my live databases has too many tables with EXECUTE permision. But I dont know how it happens: my query as follows:
select table_name
from dba_tab_privs
where owner='SYS' AND
privilege = 'EXECUTE' AND
grantee = 'PUBLIC'
result
TABLE_NAME
/598cc2d9_AWExceptionMessageRe
/24bd47b0_AWExceptionMessageRe
/b99e8561_AWExceptionMessageRe
/968869b8_AWExceptionMessageRe
/f8bf68b3_AWExceptionMessageRe
/9abd5a42_AWExceptionMessageRe
/5e83964b_AWExceptionMessageRe
/f01cb9e5_AWExceptionMessageRe
/380f765f_AWExpressCommandExce
/adef78c4_AWMemberExistsExcept
/5166f5c2_AWObjectExistsExcept
TABLE_NAME
oracle/AWXML/SparseDefinition
oracle/AWXML/ModelDimRef
/9d17934e_AWFunctionNotSupport
/d18d9de8_AWHandlerBaseTest
DBMS_AW_XML
INTERACTIONEXECUTE
CWM2_OLAP_INSTALLER
DBMS_XSOQ_ODBO
OLAPI_MDX_ROWSET_IMPL_T
OLAPI_MDX_ROWSET_TABLE
16444 rows selected.
==========================================================
Then I execute above query in other database. result was:
TABLE_NAME
STANDARD
UTL_HTTP
DBMS_PICKLER
DBMS_JAVA_TEST
UTL_FILE
UTL_RAW
UTL_TCP
UTL_INADDR
UTL_SMTP
DBMS_TRANSACTION
DBMS_SESSION
DBMS_DDL
DBMS_UTILITY
DBMS_SPACE
DBMS_ROWID
DBMS_PCLXUTIL
DBMS_APPLICATION_INFO
DBMS_OUTPUT
DBMS_DESCRIBE
DBMS_SQL
DBMS_EXPORT_EXTENSION
DBMS_JOB
DBMS_STATS
DBMS_ZHELP_IR
DBMS_PSP
DBMS_RULE
AQ$_AGENT
AQ$_DEQUEUE_HISTORY
AQ$_SUBSCRIBERS
AQ$_RECIPIENTS
AQ$_HISTORY
AQ$_NOTIFY_MSG
AQ$_DUMMY_T
DBMS_AQ_EXP_QUEUE_TABLES
DBMS_AQ_EXP_INDEX_TABLES
DBMS_AQ_EXP_TIMEMGR_TABLES
DBMS_AQ_EXP_HISTORY_TABLES
DBMS_AQ_EXP_SUBSCRIBER_TABLES
DBMS_AQ_EXP_QUEUES
DBMS_AQ_IMP_INTERNAL
DBMS_RMIN
DBMS_RESOURCE_MANAGER
DBMS_RESOURCE_MANAGER_PRIVS
DBMS_RMGR_PLAN_EXPORT
DBMS_RMGR_GROUP_EXPORT
DBMS_RMGR_PACT_EXPORT
LOW_GROUP
DEFAULT_CONSUMER_GROUP
DBMS_DEBUG_VC2COLL
DBMS_DEBUG
PBSDE
DBMS_SUMMARY
DBMS_SNAPSHOT
DBMS_REFRESH
DBMS_SNAPSHOT_UTL
DBMS_REFRESH_EXP_SITES
DBMS_REFRESH_EXP_LWM
DBMS_TRACE
DBMS_LOB
UTL_REF
UTL_COLL
ODCIPREDINFO
ODCIRIDLIST
ODCIINDEXCTX
ODCIARGDESCLIST
ODCIFUNCINFO
ODCISTATSOPTIONS
ODCICOLINFOLIST
ODCIOBJECT
ODCIOBJECTLIST
ODCIQUERYINFO
ODCICONST
SYSEVENT
DICTIONARY_OBJ_TYPE
DICTIONARY_OBJ_OWNER
DICTIONARY_OBJ_NAME
DATABASE_NAME
INSTANCE_NUM
LOGIN_USER
IS_SERVERERROR
SERVER_ERROR
DES_ENCRYPTED_PASSWORD
IS_ALTER_COLUMN
IS_DROP_COLUMN
GRANTEE
REVOKEE
PRIVILEGE_LIST
WITH_GRANT_OPTION
DICTIONARY_OBJ_OWNER_LIST
DICTIONARY_OBJ_NAME_LIST
IS_CREATING_NESTED_TABLE
CLIENT_IP_ADDRESS
DBMS_REPUTIL
DBMS_REPUTIL2
DBMS_OFFLINE_RGT
DBMS_REPCAT_RGT_EXP
DBMS_REPCAT_INSTANTIATE
DBMS_CRYPTO_TOOLKIT
DBMS_RANDOM
how come it happens? need help from u all !!!!!!!!!!

you asked why you have such grant found in dba_tab_privs. Let's try to find DBMS_RANDOM (listed on your output) in $ORACLE_HOME/rdbms/admin:
cd $ORACLE_HOME/rdbms/admin
grep dbms_random *
dbmsrand.sql:CREATE OR REPLACE PACKAGE dbms_random AS
dbmsrand.sql: -- execute dbms_random.seed(12345678);
dbmsrand.sql: -- execute dbms_random.seed(TO_CHAR(SYSDATE,'MM-DD-YYYY HH24:MI:SS'));
dbmsrand.sql: -- my_random_number := dbms_random.random;
dbmsrand.sql: -- my_random_real := dbms_random.value;
dbmsrand.sql: -- select dbms_random.value from dual;
dbmsrand.sql: -- insert into a values (dbms_random.value);
dbmsrand.sql: -- execute :x := dbms_random.value;
dbmsrand.sql:END dbms_random;
dbmsrand.sql:CREATE OR REPLACE PACKAGE BODY dbms_random AS
dbmsrand.sql:END dbms_random;
dbmsrand.sql:CREATE OR REPLACE PUBLIC SYNONYM dbms_random FOR sys.dbms_random;
dbmsrand.sql:GRANT EXECUTE ON dbms_random TO public;
This is run by catproc.sql script which you run while creating database.

I have too many problems with UserKeyMD Object

Hi everybody!!!......
I've too many problems with UserKeyMD object, this don't work, I have a Application which create the DataBase structure, but when try it for create the user key on "x" field in "ABC" table (x field is present on table, is db_Alpha with 8 chars, subtype is st_None) is raised the problem.
I try to create this way the key (VB example):
Dim oUserKeysMD As SAPbobsCOM.UserKeysMD
Set oUserKeysMD = oCompany.GetBusinessObject(oUserKeys)
oUserKeysMD.TableName = sTableName
oUserKeysMD.KeyName = sKeyName
oUserKeysMD.Unique = BoYesNoEnum.tYES
oUserKeysMD.Elements.ColumnAlias = sFieldName
oUserKeysMD.Add '<- here problem is raised
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserKeysMD)
I'm work in Delphi .Net and translate the source code of my function to VB.
P.D.:this source code at least work 2 times, but does not use it until today, I do not know because no longer it works now but.
excuse my ingles is very bad
thanks
regards
Francisco Troncoso
Chile.
Message was edited by: Francisco Troncoso

Hi, I using this names for my tables, fields and keys.
the table name is:
AOTI
the fields names are:
codigo alpha editsize 8
decrip alpha editsize 40
tipo alpha editsize 1 - valid values W, C - Default Value C
grupo1 alpha editsize 1 - valid values Y, N - Default Value N
grupo2 alpha editsize 1 - valid values Y, N - Default Value N
grupo3 alpha editsize 1 - valid values Y, N - Default Value N
grupo4 alpha editsize 1 - valid values Y, N - Default Value N
grupo5 alpha editsize 1 - valid values Y, N - Default Value N
grupo6 alpha editsize 1 - valid values Y, N - Default Value N
grupo7 alpha editsize 1 - valid values Y, N - Default Value N
grupo8 alpha editsize 1 - valid values Y, N - Default Value N
all fields have subtype none and the key name is :
AOPK1
ColumnAlias is codigo, when I try to create the table, fields and key with MetaDataOperatios example I have not problems but I try to create with my application I have the error.
Regards,
Franciso.

[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

Revision: 12982
Revision: 12982
Author:   [email protected]
Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

Issue with Audit Vault Collector for Peoplesoft-MS Sql Server

Experts,
Requesting your valuable inputs regarding below issue :
Environment:
- Peoplesoft with SQL Server 2008
- Oracle Audit Vault.
Current issue with Audit Vault collector for SQL server is that it is not giving PSFT login ID instead it is giving Peoplesoft DB service Account ID.
Is this expected ?. If yes, what is the workaround ? Can Database Firewall is a best option to capture PSFT login ID ?
Thanks

Hi Rabi ,
just do one think here ..
During data source creation , in the Additional tab area , in the SQL Engine session , select "Vendor SQL" instead of "Open SQL".
HOw could u create data source without selecting the driver corrsponding to MS SQL.?
it is recommended to download the latest Driver and use this for Driver creation.
let me know ..
Regards
Kishor Gopinathan

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

I just installed Maverick 10.9 and I'm not happy. Too many things not working. How can I get back to my OS 10.6.9?

I just installed Maverick and I'm not happy. Too many other things not working. How can Iget back to 10.6.9?

If you have a backup, it is very easy to revert back to your previous system setup.
If you don't, then the downgrade is much harder to accomplish as it require a complete clean install of OS X 10.6 Snow Leopard.
Before going down that laborious road! maybe you tell us what issues you are having.
In additon, Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic tool by a regular Apple Support forum user and contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

After having installed Mavericks I have problems with PSCS5 and the RAW converter. The glider for Exposure goes back to zero, when I use the fill in glider.

When I use PSCS5 after having upgraded to Mavericks I have problems when I use the RAW converter. The glider for exposure goes back to sero, hven I use the glider for fill in light, that means that my PSCS5 program not can be used. What do I do?

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

Too many issues with upgrading to OS6 for BB9700 - Going back to OS5

Similar Messages

Maybe you are looking for