Too many iTunes songs for iTouch device

I have not tried this yet, but want some advice before I do I have an extensive library of music with over 450,000 songs. If I loaded them all into iTunes and then sync my iTouch, 32 gb, which will only handle approx. 70,000, what will happen on the first sync??
Will I have to keep checking and unchecking the songs I want on my iTouch??

Unfortunately once all the 3 iCloud accounts have been created on your device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.

Similar Messages

ITunes song for DJing?

As I've been doing some research, so far it comes to me that there is no legal way for DJs to use iTunes song for DJing in public performances.
But why most DJing apps have an option to use song from iTunes library for DJing?
Is it really illegal that people had already been sued? Or are there some legal ways to do it (by purchasing license or else)?

DJing with other's song also means that we are promoting their song too. Phil Morse from digitaldjtips assumed that as long as DJs purchase a song legally, they barely face problems
Complete nonsense. I was in the music industry and knew of several instances where a club or DJ used tracks without a license and was reported to the record companys (who employee people in many cities for the sole purpose of checking up on clubs and public venues to make sure they're appropriately licensed). The record companies don't care a fig about some vague "promotion value" of such public performances. All they care about is getting paid directly.
I've read an article says that most clubs have a license for public performing using other's song.
Some do, but many don't and expect the DJ to have the necessary licensing. It would be wise of you to confirm that the club you intend to perform at has such a license. If they don't, then you and the club can both be held liable for copyright violation.
And somes say that if you buy a DJ insurance, you will be able to doing things legally.
Also utter nonsense. Only the companies that hold the rights to a recording or their designated agent (some record companies employ a clearing house to process and grant performance licenses) can grant licenses. Insurance through some other company cannot.
In any case, this forum is for the iTunes Store, and as we said, tracks from the iTunes Store cannot be used commercially. If you need further information on music licensing and legal usage, contact the record companies' licensing department or consult your attorney.
Regards.

I was able to use one of my itunes songs for my ringtone but can I use one for my text tone?

I was able to use one of my itune songs for a ringtone but I'd like to use one of my own songs for a text tone. Is that possible?

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

Clearmake: Warning: Too many command lines for "pcscfg.cfg"

Hi,
We are in the process of migrating an application(contains pro*C code) from oracle 9i to 10g.
When the application is compiled on oracle 9i the compilation used complete with out any problems.
After we changed the ORACLE_HOME parameter in our makefile to point to 10g home. clearmake
gives the following Warning. though the build is successful
clearmake: Warning: Too many command lines for "pcscfg.cfg"
Could anybody please help me in getting rid of this warning?
Regards
Srikrishan

Hi,
I have removed all unwanted things from the makefile, but the problem is still there.
I have included a sample program and the makefile which reproduces the problem.
The problem goes away if I comment out 4th line from the makefile and use 5th line instead
Could anybody please help?
#################The contents of the make file are #####################
targets: proctest
#ORACLE_HOME= /data/oracle/product/9.2.0
ORACLE_HOME= /data/tsd_oracle/hpux/10.2.0.2
include $(ORACLE_HOME)/precomp/lib/env_precomp.mk
#include /data/oracle/product/9.2.0/precomp/lib/env_precomp.mk
ORACLEINCLUDES= -I$(ORACLE_HOME)/precomp/public
PROCSYSINCLUDEOPT=sys_include='(/usr/include,/opt/aCC/include,/opt/aCC/include/iostream)'
ALLPROCINCLUDEOPTS= $(PROCSYSINCLUDEOPT)
PROCPPFLAGS= sqlcheck=full lines=yes code=cpp def_sqlcode=yes $(ALLPROCINCLUDEOPTS)
ACC=/opt/aCC/bin/aCC
ORACLELIBS= -L $(ORACLE_HOME)/lib32 -l:libclntsh.sl
#===========================proc test==================================
proctest:proctest.o
$(ACC) -o proctest $(ORACLELIBS) proctest.o
#========================= General target rules ============================
proctest.o:
$(ORACLE_HOME)/bin/$(PROC) $(PROCPPFLAGS) CPP_SUFFIX=cc iname=proctest.pc
$(ACC) $(ORACLEINCLUDES) -c proctest.cc -o proctest.o
#####################program (proc test.pc)#########################
#include<stdlib.h>
#include<iostream.h>
#include<sqlca.h>
#define UNAME_LEN 20
#define PWD_LEN 20
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR username[UNAME_LEN]; // VARCHAR is an ORACLE supplied struct
varchar password[PWD_LEN]; // varchar can be in lower case also
EXEC SQL END DECLARE SECTION;
void sql_error(char *msg);
int main()
EXEC SQL WHENEVER SQLERROR DO sql_error("ORACLE error:");
username.len = (unsigned short)strlen(strcpy((char *)username.arr, "scott"));
password.len = (unsigned short)strlen(strcpy((char *)password.arr, "tiger"));
EXEC SQL CONNECT :username IDENTIFIED BY :password;
cout<<"Connected to oracle \n";
return(0);
void sql_error(char *msg)
EXEC SQL WHENEVER SQLERROR CONTINUE;
cout << endl << msg << endl;
cout << sqlca.sqlerrm.sqlerrmc << endl;
EXEC SQL ROLLBACK RELEASE;
exit(1);
####################################################################

Too many recipients found for message type ORDERS in the ALE model

Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth

ALE settings error "Too many recipients found for message type" urgent

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub

Too many recipients found for message type (Distribution model)

Hi,
I wanna send Dilvery note using message type DESADV from a SAP system to another non-SAP System.
I have Created port partner profile and distribution model.
But the Problem is the same message type DESADV is used to send Dilvery from SAP System to another SAP Client.
Idoc getting failed and throwing error stating Too many recipients found for message type DESADV in the ALE model .
I am sure we can create the more than one recipients for same message types. I have done it some time back. Any help highly appreciated.
Regards
Raj

This message pops up when SAP can't identify how to distribute the IDoc based on the settings in BD64. Take a look at the settings there, most likely you'll need to add a filter.
The big ALE/EDI/IDoc book suggests that the same IDoc may be distributed to 2 different systems but specific details are not clear. It seems that one system should be configured first (it does mention a need to use a filter) and then somehow menu Edit -> Model View -> Distribute should be used.
I've never done it myself though and have only run into that error when I missed some filter settings in BD64. Hope this helps.

Too many recipients found for message type in the ALE model

Hello Friends,
Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP .
In the distribution model i have defined the sender receiver and message type clearly...
But in va01 after creating sales order extras ->Output->Hearder --->Edit
Output type-- BA00
medium --ALE
Dispatch time : Send Immediately
I am getting a error -
Too many recipients found for message type ORDRSP in the ALE model
Message no. B1130
Diagnosis
In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
Procedure
Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
Please help me in solving this error.
Regards,
jeevan

Hi Jeevan,
In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
Under the node ORDRSP, add the filter group for Customer.
Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
Hope it solves your Issues.
Regards,
Anbalagan.

Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help

Too many Subscribers/Receivers for Queue

The link of Feedback in Java EE 5 tutorial doesn't work, because of this I ask my question here.
I have tried the " Simple Example of Synchronous Message Receives" in Chapter 32 of Java EE 5 tutorial.
In case of destination type queue I got error message.
The log of test:
M:\java\javaeetutorial5\examples\jms\simple\producer\dist>appclient -client producer.jar queue 3
Destination type is queue
Sending message: This is message 1
Sending message: This is message 2
Sending message: This is message 3
M:\java\javaeetutorial5\examples\jms\simple\producer\dist>cd ../../synchconsumer/dist
M:\java\javaeetutorial5\examples\jms\simple\synchconsumer\dist>appclient -client synchconsumer.jar queue
Destination type is queue
Exception occurred: com.sun.messaging.jms.ResourceAllocationException: [C4073]:
A JMS destination limit was reached. Too many Subscribers/Receivers for Queue :
PhysicalQueue user=guest, broker=pc2900:7676(1442)
My question: How can I configure the Queue for more subcribers/receivers?

Hi,
Depending on the version of JMS, this may be a limitation of iMQ PE Edition (This is early in the morning for me, I can't remember which one). So you can look at the documentation, this may be a limitation of PE versus SE or EE. If you can modify it it would be using either the command line imqcmd or the gui based, imqadmin. With it, you can get into the connection factory, and change the maximum number of active consumers onto the queue.
I beleive that using glassfish (as 9) would alleviate this limitation, if it is there, since this is using openmq (imq v4.0).
HTH
TE

Too many type parameters for interface

In JDev 11.1.1.0.0, I do a compile and I get 65 files with errors saying
Error: too many type parameters for interface java.util.Map<java.lang.String, java.lang.Class<?>>
but the class doesn't use the Map object.
Other files get it for the Set object.
Note that no line number was given as part of the error message.
I installed the JDev 11.1.1.0.0 base from the zip file.
What's wrong?

Hi,
And you do a compile on what exactly, Please post one of the erroneous class' code using the code within bracket tag so that we can help you.
Regards,
~ Simon

Can I exchange old iTunes songs for new ones?

I was wondering if I could exchange my old downloaded iTunes songs for new ones that are DRM free.
Thanks!

Welcome to the forums Pete
If you go to the Store main screen, you will see on the right an option "Upgrade to iTunes Plus".

Too many iTunes authorized

So, I've changed Mac laptops for about 3 times now (nothing wrong, just wanted the latest and the greatest!), and within that time, I had to authorize my Macs for the iTunes music.. in this time, due to some software failure, i had to format and reinstall Mac OS X (and iTunes with it), and so authorize the Mac to use the music I had backed up.
The thing is, now i have the new Macbook Pro, and I'm trying to play the old music.. but I keep getting the message that I have authorized too many computers, so I can't play the files without unauthorizing the other Macs..
Thing is, I already formatted and gave the laptops to my younger siblings, so I dunno how i can do this...
So.. what to do?? I've got a lota music from the iTunes store... and I wanna play them!!!
Any light you can shed on this will be much appreciated..
Thanks!

Use the Deauthorize All command documented in this article.
(46663)

Purchasing iTunes songs for children's accounts

I want to occasionally buy individual iTunes songs or films for my children, both of whom are too young to have credit cards, but they have their own individual accounts on the family Mac.
What is the best way to do this without them having access to my password/credit card details?
Can you purchase a one off 'gift' of online songs for someone else?
I do not want to put them on a monthly 'allowance' of downloads ( as I did before) as this ends up too expensive
thanks in advance
m s

Also, you can create an account for them with your CC, then remove your CC details.
Add it back when you want to make a purchase for them, then remove it again.

Too many real instruments for a new project?

I keep getting the notification which says "Part of the project was not played - This project has too many real instrument tracks to be played in real-time".
BUT the problem is that this occurs even when I open a new garageband file (i.e. no tracks!) and I'm only 3 seconds into recording the first track! So garageband is basically not working for me. I've tried uninstalling and reinstalling it to no avail. Just a few months back I was still able to use it comfortably to do edit many different tracks together so I really don't know what the problem is. I don't really know if its a problem with the processor as I barely use the memory on my macbook pro and even when recording CPU usage doesn't go above 20% so I'm really at a loss. Please help!

Oh apple support asked me to try that out too but it did not work.. In fact for some of the suggestions they gave (eg using a different user, or even locking the track) it only managed to extend the period of recording to about 10 seconds before the problem resurfaced and after that it was back to the same 3 second problem.
But that is an important clue, Josiah. If you cannot even record properly from a different user account with basic settings, we know that the settings in your user account cannot be causing this - this looks like system wide trouble.
You could run a hardware check over night, to check your hardware:
Intel-based Macs: Using Apple Hardware Test
and if the hardware check does not show any problems, I'd reinstall Mountain Lion.
See Linc Davis's post on how to reinstall: Re: Garageband doesn't open in Mac Mini mid 2011
Regards
Léonie

Too many iTunes songs for iTouch device

Similar Messages

Maybe you are looking for