Too Many Prints From The cmn_err
Hi All,
I need some help and pointers regarding driver programming on solaris 10 kernel.
I have a module that has been ported in the kernel space. And I have changed all
the printfs to cmn_err as the simplest logging mechanism and it prints the messages in /var/adm/messages. I have three queries:
1) Due to bug, system panics in some code leg. However, all the prints by that time are not visible in the /var/adm/messages log. Most likely, the kernel panics before all the prints have a chance to be copied to the messages file. This creates a problem because prints do not correctly represent the amount of code that was successfully executed and hence debugging becomes difficult. Is there a way that could cause 'flushing' of messages to the /var/adm/messages file?
2) In case 'flushing' is not possible, is there a way to read the remaining message buffer from the crash file generated on reboot? Can it be viewed using mdb crash analysis?
3) While debugging a "bad stack overflow" condition, I found that if I disabled all the prints, system did not panic and the "bad stack overflow" did not occur. Does anybody know if too many cmn_err prints can cause kernel panic?
Any pointers to manuals/articles or other material will be greatly appreciated. I am ready to RTFM if only somebody would point to it.
Thanks in advance,
Ashutosh
For this to happen i guess they have a bad senderbase reputation, ie below -1.0?
What you can do is that you can add the IP-adress into a new SenderGroup in your Host Access Table (HAT overview) with a "Mail Flow Policy" that allows more connections from their IP-adress. Don't allow too many though if they have problems in their network, and make sure Anti-virus scanning and Spam control is enabled in the Policy settings too.
You can indentify which "SenderGroup" your ISP is connecting into and what SenderBase repuataion score they might have. Use "message tracking" in WebUI, or "findevent" in command line interface to find this out.
/F
Similar Messages
-
I bought too many songs from the album so balance was less than $1.29 and now the complete my album link is not there. What can I do to pay the balance only?
"Note: if you previously acquired a certain number of single tracks from the same album that the Complete My Album price would be less than the current price for a single song (a single video for a video album), you will not be able to purchase the remaining tracks using Complete My Album.
iTunes Store: Complete My Album Frequently Asked Questions (FAQ) -
HT4356 When printing from the iPad how to control how many pages of the document to print?
When printing from the iPad, how to control how. Any pages of the document to print?
You got me curious (even though I've never used coupons.com, and I have an AirPrint printer). So I checked out coupons.com in the iTunes Store and found the following two reviews that I think explain everything:
Based on the above, my conclusion is coupons.com is set up to print on wireless HP printers from an iPad. You could print to a non-AirPrint HP printer as well using an app from the iTunes Store. But the non-AirPrint printers do offer considerably less compatibility with Apple's iPad applications than the AirPrint ones do. For example, in the Epson case, non-AirPrint Epsons can print from Safari but not from email. -
I used to be able to print from the browser, specifically Amazon...hit print and I would get the print/preview from windows. In IE it worked perfectly, but IE start messing up and grinding to halt, taking MINUTES to load a page, like dial-up!
Firefox is fast and runs great....just cant PRINT..grr.
also... noticed that i am unable to read my online paper now. Paper will open, i can read the full page view, but when I try to hit a particular article to enlarge in another popup window, nothing happens. perhaps a security something preventing popups? but there is no option to do otherwise.
again, was able to read articles in IE.
Am I missing an add-on?I too developed the same problem about 2 weeks ago. First in Safari then Firefox. I have 2 printers, one local and one networked (different brands etc). Neither browser will print ANYTHING from the web to either printer. Jobs are not stuck in queu - goes to printer but just spits out blank paper. Not even email. No pop-ups involved (like the usps site). Not website specific. All other applications on the machine print perfectly to both printers.
-
11g-[nQSError: 42029] Subquery contains too many values for the IN predicat
Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckengckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v -
Too many objects match the primary key oracle.jbo.Key
Hi OAF Gurus,
Currently we are implementing R12 Upgrade , for this we have deployed all the custom OAF Application related files on to the the respective JAVA_TOP folder.
We have a custom municipal postal application which tracks the Postal Details.
The page runs perfectly fine without any error in 11i instance, but the same is erroring out In R12.
In R12 it shows an error as Too many objects match the primary key oracle.jbo.Key[112010 2014-10-01]
here 112010 is nothing but the postal code id and 2014-10-01 is the Effective Start Date
We have a custom table as xxad_postal_codes_f (Date Track table)which contains the postal_code_id and effective_start_date (primary key is combination of postal_code_id and effective_start_date ).
The Table already contains a row for postal_code_id = 112010 and Effective_Start_date = Sysdate.
Now we want to update the entry for the same postal code with the Id being same as 112010 and Effective_Start_date as 2014-10-01 through custom PostCodeChangePG
at the time of save we are getting an error as Too many objects match the primary key oracle.jbo.Key[112010 2014-10-01]
The table doesn't contain any of the data mentioned ([112010 2014-10-01]) at the time of insertion, hence there should not be any duplication of primary key but still we are getting the error.
Please let us know how can we handle this..?
Below is the code which is getting called on Click of Save button of PostCodeChangePG
if (pageContext.getParameter("Apply") != null)
PCodeCoWorkerBase coWorker = getCoWorker(pageContext, webBean);
coWorker.processApply();
Code in PCodeCoWorkerBase
public void processApply()
String postalCodeId = UIHelper.getRequiredParameter(pageContext, "postalCodeId");
Date startDate = UIHelper.getRequiredDateParameter(pageContext , "EffectiveStartDate");
Serializable[] postalCodeData = (Serializable[]) applicationModule.invokeMethod( "insertPostalCodeMajorChange", params, paramTypes );
finalizeTransactionAndRedirect( postalCodeData );
Code in Application Module
public Serializable[] insertPostalCodeMajorChange ( String postalCodeId, Date date )
PCodeAmWorker amWorker = new PCodeAmWorker(this);
return amWorker.insertMajorChange( postalCodeId, DateHelper.convertClientToServerDate( getOADBTransaction(), date )
Code in PCodeAmWorker
public Serializable[] insertMajorChange ( String postalCodeId, Date date )
// Get the view objects we need from the application module
OAViewObject viewObject = (OAViewObject) applicationModule.getPCodesVO();
PCodesVORowImpl currentRow = (PCodesVORowImpl) viewObject.getCurrentRow();
currentRow.validate();
currentRow.setEffectiveStartDate(date);
currentRow.setComment1(currentRow.getNewComment());
// Create a new row based on the current row
PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow); //This is failing out and gives the error
// Get the new effective start date as entered by the user
Date effectiveStartDate = currentRow.getEffectiveStartDate();
// Calculate the previous period's effective end date
Date previousEffectiveEndDate = DateHelper.addDays(effectiveStartDate, -1);
// Refresh the current row (the one changed by the UI) with the data it had at the beginning of the transaction
currentRow.refresh(Row.REFRESH_UNDO_CHANGES);
// The current row will now represent data for the the previous period set the effective end date for the previous period
currentRow.setEffectiveEndDate(previousEffectiveEndDate);
// Insert the newly created row that now represents the new period
viewObject.insertRow(newRow);
applicationModule.apply();
return generateResult(newRow);
PCodesVO() is based on PostalCodeEO
below is the code from PostalCodeEOImpl
public void create(AttributeList attributeList)
// NOTE: This call will set attribute values if the entity object is created with a call to vo.createAndInitRow(..)
super.create(attributeList);
if (getPostalCodeId() == null)
setPostalCodeId(getOADBTransaction().getSequenceValue("XXAD_POSTAL_CODES_S"));
if (getEffectiveStartDate() == null)
setEffectiveStartDate(getOADBTransaction().getCurrentDBDate());
After diagnosing the issue we found that the error is on the code of AMworker file while creating a new row PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow);
we tried so many things such as clearing entity cache, VO cache, validating for duplicate primary key but still not able to resolved this.
Please advice how to insert a new row on the PCodesVORowImpl without any exception.
Thanks,
PallaviHi ,
One question here , if you are udating a existing record then why you are trying to create a new row
PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow);
Thanks
Pratap -
Sendmail in Solaris 10 - 554 Too many connections from origin
I recently upgraded a server from Solaris 9 to Solaris 10. One of the apps that worked fine on S9 is now having a problem. I believe I have discovered the cause, but I'm not having any luck coming up with a solution.
The app in question queries a database for a list of e-mail addresses (all within our own domain) and then sends e-mail to each user. The messages are sent to our Barracuda firewall/spam filtering appliance, and it relays the messages on to our Exchange server.
The problem that arose after the upgrade is that sendmail is opening too many concurrent connections to the Barracuda, and the 'Cuda is replying with "554 Too many connections from origin".
I see that there is a sendmail configuration parameter "SingleThreadDelivery" that will only allow one connection to the Barracuda at a time. That appears to be overly restrictive, though.
My question is this: is there a way to tell sendmail to only allow some number of concurrent connections to the 'Cuda so as not to hit this limit?
Thanks,
BillGlen,
Thanks for the reply.
Yes, I did look at those, but my understanding was that those parameters effect inbound connection and in our case, the problem is that we want to limit the number of outbound connections.
As it turns out, the S10 upgrade was not the cause of this problem. At the same time that we upgraded we also added a second network interface (and IP address). Unknown to either myself or the current Barracuda admin, the old IP had been configured into the 'Cuda so that rate limits did not apply. The fix was to add the second IP, too (well actually, he decided to open it up to all of our servers' internal IPs).
Bill -
JBO-25013: Too many objects match the primary key oracle.jbo.Key
hi am adding values from one viewObject to another viewObject am geting this error JBO-25013: Too many objects match the primary key oracle.jbo.Key
i used this code
<af:commandButton text="Add New" id="cb5"
actionListener="#{pageFlowScope.addMember.addMember}"/>
RichTable empTable;
public void setEmpTable(RichTable empTable) {
this.empTable = empTable;
public RichTable getEmpTable() {
return empTable;
binding="#{pageFlowScope.addMember.empTable}">
the error is pointing in this line
public void addMember(javax.faces.event.ActionEvent actionEvent) {
List<String> tempTable = new ArrayList<String>();
//Code to get the bindings for TargetVO :
RowKeySet selectedEmps = getEmpTable().getSelectedRowKeys();
Iterator selectedEmpIter = selectedEmps.iterator();
DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter = bindings.findIteratorBinding("UserDetailsViewVO1Iterator");
RowSetIterator empRSIter = empIter.getRowSetIterator();
while(selectedEmpIter.hasNext()){
Key key = (Key)((List)selectedEmpIter.next()).get(0);
Row currentRow = empRSIter.getRow(key);
onRowCreate(currentRow);
public void onRowCreate( Row currentRow ) {
OIDOperations oIDOperations= new OIDOperations();
Map<Object,String> mp=new HashMap<Object, String>();
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
//access the name of the iterator the table is bound to.
DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("DeltMember1Iterator");
//access the underlying RowSetIterator
RowSetIterator rsi = dciter.getRowSetIterator();
//get handle to the last row
Row lastRow = rsi.last();
//obtain the index of the last row
int lastRowIndex = rsi.getRangeIndexOf(lastRow);
//create a new row
Row newRow = rsi.createRow();
String f = (String)currentRow.getAttribute("Firstname");
String s = (String)currentRow.getAttribute("Surname");
String u = (String)currentRow.getAttribute("Username");
String n = (String)currentRow.getAttribute("Emailaddress");
newRow.setAttribute("Firstname", f);
newRow.setAttribute("Surname", s);
newRow.setAttribute("Username1", u);
newRow.setAttribute("Username", u);
newRow.setAttribute("Emailaddress", n);
newRow.setAttribute("Organisationid1",getorgid());
//initialize the row
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//add row to last index + 1 so it becomes last in the range set
rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
//make row the current row so it is displayed correctly
rsi.setCurrentRow(newRow);
System.out.println("Username " + u);
System.out.println("firstname " + f);
System.out.println("surname " + s);
System.out.println("email " + n);
}Edited by: adf009 on 2013/02/14 2:44 PM
Edited by: adf009 on 2013/02/14 2:44 PM
Edited by: adf009 on 2013/02/14 2:46 PM
Edited by: adf009 on 2013/02/14 2:47 PMhow must i control my pk
my log error is
Caused by: oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[2909 ].
at oracle.jbo.server.EntityCache.throwTooManyObjectsException(EntityCache.java:604)
at oracle.jbo.server.EntityCache.handleDuplicateKey(EntityCache.java:613)
at oracle.jbo.server.EntityCache.addForAltKey(EntityCache.java:1020)
at oracle.jbo.server.EntityCache.add(EntityCache.java:537)
at oracle.jbo.server.EntityImpl.callCreate(EntityImpl.java:1207)
at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1152)
at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:498)
at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:515)
at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:5714)
at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1993)
at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2492)
at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2533)
at oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:2514)
at oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:11079)
at uam.cadastre.gov.za.OrgDetails.onRowCreate(OrgDetails.java:1650)
at uam.cadastre.gov.za.OrgDetails.addMember(OrgDetails.java:1624)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
... 49 more
<DCUtil> <findSpelObject> [3498] DCUtil, returning:oracle.jbo.uicli.binding.JUFormBinding, for uam_view_pageDefs_OrgDetailsPageDef_WEB_INF_Updatetaskflow_definition_xml_Updatetaskflow_definition
<DCIteratorBinding> <releaseDataInternal> [3499] Releasing iterator binding:OfficecodeList_436
<DCIteratorBinding> <releaseDataInternal> [3500] Releasing iterator binding:OrganisationtypecodeList_344
<DCIteratorBinding> <releaseDataInternal> [3501] Releasing iterator binding:OrgsubtypecodeList_437
<DCIteratorBinding> <releaseDataInternal> [3502] Releasing iterator binding:CountrycodeList_438
<DCIteratorBinding> <releaseDataInternal> [3503] Releasing iterator binding:ProvinceList_439
<DCIteratorBinding> <releaseDataInternal> [3504] Releasing iterator binding:CityList_440
<DCIteratorBinding> <releaseDataInternal> [3505] Releasing iterator binding:SuburbList_441
<JUCtrlHierNodeBinding> <release> [3506] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_45, value:UpdResPerson1Iterator
<JUCtrlHierNodeBinding> <release> [3507] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_46, value:UpdResPerson1Iterator
<JUCtrlHierNodeBinding> <release> [3508] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_90, value:UserDetailsViewVO1Iterator
<JUCtrlHierNodeBinding> <release> [3509] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_203, value:DeltMember1Iterator
<DCIteratorBinding> <releaseDataInternal> [3510] Releasing iterator binding:UpdUamOrganisation1Iterator
<JUCtrlHierNodeBinding> <release> [3511] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_45, value:UpdResPerson1Iterator
<JUCtrlHierNodeBinding> <release> [3512] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_46, value:UpdResPerson1Iterator
<DCIteratorBinding> <releaseDataInternal> [3513] Releasing iterator binding:UpdResPerson1Iterator
<DCIteratorBinding> <releaseDataInternal> [3514] Releasing iterator binding:UpdPaymentOptions1Iterator
<DCIteratorBinding> <releaseDataInternal> [3515] Releasing iterator binding:LutPaymentmethodsView1Iterator
<JUCtrlHierNodeBinding> <release> [3516] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_203, value:DeltMember1Iterator
<DCIteratorBinding> <releaseDataInternal> [3517] Releasing iterator binding:DeltMember1Iterator
<DCIteratorBinding> <releaseDataInternal> [3518] Releasing iterator binding:UamUserdetailsView1Iterator
<DCIteratorBinding> <releaseDataInternal> [3519] Releasing iterator binding:UpdOrganisationUser1Iterator
<JUCtrlHierNodeBinding> <release> [3520] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_90, value:UserDetailsViewVO1Iterator
<DCIteratorBinding> <releaseDataInternal> [3521] Releasing iterator binding:UserDetailsViewVO1Iterator
<JUCtrlHierNodeBinding> <release> [3522] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_87, value:vcRowsIterator
<DCIteratorBinding> <releaseDataInternal> [3523] Releasing iterator binding:operators_357
<DCIteratorBinding> <releaseDataInternal> [3524] Releasing iterator binding:listIter
<DCIteratorBinding> <releaseDataInternal> [3525] Releasing iterator binding:values_360
<DCIteratorBinding> <releaseDataInternal> [3526] Releasing iterator binding:values_360
<DCIteratorBinding> <releaseDataInternal> [3527] Releasing iterator binding:nestedViewCriteria_362
<DCIteratorBinding> <releaseDataInternal> [3528] Releasing iterator binding:nestedViewCriteria_362
<DCIteratorBinding> <releaseDataInternal> [3529] Releasing iterator binding:operators_357
<DCIteratorBinding> <releaseDataInternal> [3530] Releasing iterator binding:operators_364
<DCIteratorBinding> <releaseDataInternal> [3531] Releasing iterator binding:listIter
<DCIteratorBinding> <releaseDataInternal> [3532] Releasing iterator binding:values_367
<DCIteratorBinding> <releaseDataInternal> [3533] Releasing iterator binding:values_367
<DCIteratorBinding> <releaseDataInternal> [3534] Releasing iterator binding:nestedViewCriteria_369
<DCIteratorBinding> <releaseDataInternal> [3535] Releasing iterator binding:nestedViewCriteria_369
<DCIteratorBinding> <releaseDataInternal> [3536] Releasing iterator binding:operators_364
<DCIteratorBinding> <releaseDataInternal> [3537] Releasing iterator binding:operators_371
<DCIteratorBinding> <releaseDataInternal> [3538] Releasing iterator binding:listIter
<DCIteratorBinding> <releaseDataInternal> [3539] Releasing iterator binding:values_374
<DCIteratorBinding> <releaseDataInternal> [3540] Releasing iterator binding:values_374
<DCIteratorBinding> <releaseDataInternal> [3541] Releasing iterator binding:nestedViewCriteria_376
<DCIteratorBinding> <releaseDataInternal> [3542] Releasing iterator binding:nestedViewCriteria_376
<DCIteratorBinding> <releaseDataInternal> [3543] Releasing iterator binding:operators_371
<DCIteratorBinding> <releaseDataInternal> [3544] Releasing iterator binding:operators_378
<DCIteratorBinding> <releaseDataInternal> [3545] Releasing iterator binding:listIter
<DCIteratorBinding> <releaseDataInternal> [3546] Releasing iterator binding:values_381
<DCIteratorBinding> <releaseDataInternal> [3547] Releasing iterator binding:values_381
<DCIteratorBinding> <releaseDataInternal> [3548] Releasing iterator binding:nestedViewCriteria_383
<DCIteratorBinding> <releaseDataInternal> [3549] Releasing iterator binding:nestedViewCriteria_383
<DCIteratorBinding> <releaseDataInternal> [3550] Releasing iterator binding:operators_378
<DCIteratorBinding> <releaseDataInternal> [3551] Releasing iterator binding:criteriaItemsForSearch_348
<DCIteratorBinding> <releaseDataInternal> [3552] Releasing iterator binding:viewObjectBindVars_351
<DCIteratorBinding> <releaseDataInternal> [3553] Releasing iterator binding:viewObjectBindVars_351
<DCIteratorBinding> <releaseDataInternal> [3554] Releasing iterator binding:properties_353
<DCIteratorBinding> <releaseDataInternal> [3555] Releasing iterator binding:properties_353
<DCIteratorBinding> <releaseDataInternal> [3556] Releasing iterator binding:criteriaItemsForSearch_348
<JUCtrlHierNodeBinding> <release> [3557] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_88, value:vcRowsIterator
<JUCtrlHierNodeBinding> <release> [3558] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_87, value:vcRowsIterator
<JUCtrlHierNodeBinding> <release> [3559] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_88, value:vcRowsIterator
<DCIteratorBinding> <releaseDataInternal> [3560] Releasing iterator binding:vcRowsIterator
<DCIteratorBinding> <releaseDataInternal> [3561] Releasing iterator binding:variableIterator
<DCIteratorBinding> <releaseDataInternal> [3562] Releasing iterator binding:UamAddress1Iterator
<ApplicationPoolMessageHandler> <doPoolMessage> [3563] **** PoolMessage REQ ATTACH LWS
<ApplicationPoolMessageHandler> <doPoolMessage> [3564] **** PoolMessage REQ DETACH LWS
<ViewObjectImpl> <closeStatementsResetRowSet> [3565] ViewObject: [internal_vcival_def]Root.internal_vcival_def_385 close prepared statements...
<ViewObjectImpl> <closeStatementsResetRowSet> [3566] ViewObject: [internal_vco_def]Root.internal_vco_def_442 close prepared statements...
<ViewObjectImpl> <closeStatementsResetRowSet> [3567] ViewObject: [internal_vci_def]Root.internal_vci_def_355 close prepared statements...
<ViewObjectImpl> <closeStatementsResetRowSet> [3568] ViewObject: [AppModule.UserDetailsViewVO1.data_uam_view_updateorgPageDef_Updatetaskflowdefinition1_uam_view_pageDefs_OrgDetailsPageDef_WEB_INF_Updatetaskflow_definition_xml_Updatetaskflow_definition_ImplicitViewCriteriaQuery]Root.AppModule_UserDetailsViewVO1_data_uam_view_updateorgPageDef_Updatetaskflowdefinition1_uam_view_pageDefs_OrgDetailsPageDef_WEB_INF_Updatetaskflow_definition_xml_Updatetaskflow_definition_ImplicitViewCriteriaQuery_346 close prepared statements...
<DCUtil> <findSpelObject> [3569] DCUtil, returning:oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding, for ImplicitViewCriteriaQuery
<JUCtrlHierNodeBinding> <release> [3570] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_87, value:vcRowsIterator
<JUCtrlHierNodeBinding> <release> [3571] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_88, value:vcRowsIterator
<JUCtrlHierNodeBinding> <release> [3572] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_87, value:vcRowsIterator
<JUCtrlHierNodeBinding> <release> [3573] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_88, value:vcRowsIterator
<DCIteratorBinding> <releaseDataInternal> [3574] Releasing iterator binding:vcRowsIterator
<DCIteratorBinding> <releaseDataInternal> [3575] Releasing iterator binding:variableIterator
<ADFLogger> <begin> Rollback transaction
<ApplicationModuleImpl> <resetState> [3576] Resetting AM=Root
<ApplicationPoolMessageHandler> <doPoolMessage> [3577] **** PoolMessage REQ DETACH LWS
<ApplicationPoolMessageHandler> <doPoolMessage> [3578] **** PoolMessage REQ ATTACH LWS
<ApplicationPoolMessageHandler> <doPoolMessage> [3579] **** PoolMessage REQ DETACH LWS
<XmlErrorHandler> <handleError> ADF_FACES-60096:Server Exception during PPR, #1
javax.servlet.ServletException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[2909 ].
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.jbo.TooManyObjectsException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25013. Error message parameters are {0=oracle.jbo.Key[2909 ]}
at oracle.jbo.server.EntityCache.throwTooManyObjectsException(EntityCache.java:604)
at oracle.jbo.server.EntityCache.handleDuplicateKey(EntityCache.java:613)
at oracle.jbo.server.EntityCache.addForAltKey(EntityCache.java:1020)
at oracle.jbo.server.EntityCache.add(EntityCache.java:537)
at oracle.jbo.server.EntityImpl.callCreate(EntityImpl.java:1207)
at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1152)
at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:498)
at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:515)
at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:5714)
at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1993)
at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2492)
at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2533)
at oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:2514)
at oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:11079)
at OrgDetails.onRowCreate(OrgDetails.java:1650)
at OrgDetails.addMember(OrgDetails.java:1624)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:148)
at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:279)
at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:145)
at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:402)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 38 more
the error is in this like Row newRow = rsi.createRow();Edited by: adf009 on 2013/02/14 2:48 PM -
JBO-25013: Too many objects match the primary key oracle.jbo.Key[33 ]!!!
Hi all, I have a huge problem...
I have two tables in a parent - child relationship. Each has it's own entity and view object with appropriate associations and links. The parent table has an insert trigger which inserts default rows into the child table when a new parent row is created.
Even in the application module tester (not to mention the equivalent .jspx)
this error goes off :
oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[35 ].
Sometimes, I couldn't figure out what makes the difference, the tester inserts the detail records just fine when inserting the master, but never from the page!!!
How do I get around this problem?? I'm clueless.
Any suggestions welcome. I'm desperate at this stage!
A lots'a work will be lost (packages and triggers on the server...:((( if there's no solution.
Thanx for yr help in advance, Ildikolooks like Database trigger causes "TooManyObjectsException JBO-25013" in view object
-
JBO-25013: Too many objects match the primary key oracle.jbo.Key[0 ].
Hi All,
I saw all the threads pertaining to this problem but couldn't find a proper solution.
I m also facing the same problem. I have 2 view objects VIEW_A and VIEW_B. Both the view objects are created on the single entity objects independently. When I try to insert a row in VIEW_A, no error comes and all the input fields of the form are empty as it should be. But when I try to insert a row in VIEW_B, the form fields display the first row of database table automatically and giving the error as Error
JBO-25013: Too many objects match the primary key oracle.jbo.Key[0 ]. ..
I am unable to rectify the problem. why it works fine with one view object and not with other. Plz help. Its urgent...Hi,
Many references in metalink relate to this error as a data corruption issue. Maybe you should check the data from the back end,from the corresponding tables , with the one you see in the application . I'm no expert in DB,but suggest you take the help of a DBA. -
Too many objects match the primary key oracle.jbo.Key[2]. Error
Hi
I have to display a Read Only table and an Editable Form below it so that the user can select a row in the table and that row should be populated in the form below.
The user should be able to update the row and save in the below form.
Then the table above also should be refreshed with the updated values.
For this I have created a VO based on EO.
Using the same data control I have created a UI Readonly table and an Editable form in the same JSF page.
When I run the page, the first row is populated in both the table and form.
When I select the second row in the table, I am getting the following error in the Editable Form
Error: Too many objects match the primary key oracle.jbo.Key[2 ].
My EO has only one Primary key and I have not included the ROWID column in EO or VO.
How can we fix this issue ?
However, if I move the editable form to another page, It is working fine.
But we need to have both the table and editable form in the same page for usability purposes.
Thanks for any help.
Sameeryou can try refreshing your VO in various ways:
1. try setting partialTrigger on table pointing to your commandbutton .. also make sure partialSubmit on your commandButton is set to true.
2. Do bindings on the page def for Execute action of your read-only VO. Call this method from actions of your commandButton.
If they dont work then you can try creating a method in your AMImpl which does calls vo.executeQuery and expose this to pageDef.. and call if from the actions of your button .. but this may not be best way
Amit -
Too many objects match the primary key oracle.jbo.Key[......]Exception
Hi,
When I run the search page 1st time its run fine and I can able to update the record.
But when I run the search page 2nd time I am getting following error,
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[CDV_WATER_SUPPLY_SOURCE_SIZE ]. at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408) at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2364) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1717) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423) at OA.jspService(OA.jsp:40) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:534)
Already I have gone through other thread related to this issue but I didn't get exact solution.
How to solve this issue?
Please suggest.
Thanks & Regards,
SagarikaHi Sumit,
I run the following query in SQL worksheet and its retrieving three rows,
select * from (SELECT LpgConnEO.CITIZEN_ID,
LpgConnEO.LPG_CONNECTION_NUMBER,
LpgConnEO.LPG_CONNECTION_AGENCY
FROM LPG_CONNECTION_AGENCY LpgConnEO)
QSRLT where (CITIZEN_ID=(SELECT JGZZ_FISCAL_CODE FROM HZ_PERSON_PROFILES per
WHERE per.EFFECTIVE_END_DATE IS NULL AND per.PARTY_ID=65632))
Result,
CITIZEN_ID LPG_CONNECTION_NUMBER LPG_CONNECTION_AGENCY
101016210900001 मन्दाकनी गैस ऐजेन्सी 2789674
101016210900001 27896 मन्दाकनी गैस ऐजेन्सी
101016210900001 036227 मन्दाकनी गैस ऐजे
and the primary key marked Attributes in the EO are in sync with the ones in the actual DB table.
I am getting above exception when the query is retrieving more than one row and its working fine if the query retrieve one row.
In this case how can we resolve the issue if the primary key attribute retrieve more than one row?
Thanks & Regards,
Sagarika -
LOV gives "Too many objects match the primary key oracle.jbo.Key" error.
Hello,
I'm using JDeveloper 11.1.1.3. I have created 2 VO's which are related to the same EO. In one of the views i added a list of value (combo box with list of values) to an attribute. In my page, i'm using the first view that doesn't have the LOV. Also in my page there is a button with a popup in which i'm using the second VO to list the values of the attributes and filter a table (which is also in the popup). Initially, when i press this button all rows are viewed in the table in the popup. However, when i try to filter the table using the LOV i'm getting an error:
Too many objects match the primary key oracle.jbo.KeyAny ideas?
MohamedHello again,
Thank you all for your reply! I solved my problem. Apparently it wasn't a problem with duplicate data nor wrong primary key! I was implementing the LOV approach wrong. I was creating a 'List of Value' in my VO and dragging the attribute from data control as 'Select one Choice'. I was doing this because i thought i had to declare a type before i can use it in my data control. As i concluded, i should either create it in my VO and not use the default SOC option. Or, i could not create a LOV and use the default JDeveloper SOC option.
Thanks again for your help.
Mohamed. -
My printer has stop printing from the photo tray. I need to place the photo stock in the main tray
I've a HP PhotoSmart Plus printer B210a. The printer will no longer print from the photo tray. I'm still able to get prints; but I must place the photo stock in the main tray. It becomes a problem, because I sometimes forget the photo stock is the main tray and I waste photo stock when I do my regular printing and only get part it because the photo was still in the tray. Anyway to fix this?
Hi there wmcook,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and are there any errors when attempting to print from the photo tray?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
? The prints from Elements are not as sharp as when printed from the card Why? help please
The prints from the memory card are much sharper than when printed from Adobe Elements Is this normal or is there a reason ? help please
ECol a écrit:
As far as I am aware the card is read by the computer as it is without any form of enhancement and sent to the computer and printed.
If I print from the Photo Gallery the prints are as sharp as above.
I would have expected printing from Photoshop to be the same.
No, that's not that simple. Printing means resizing (resampling) most of the time and depending on your printer type/printer driver, a default sharpening is generally applied.
By the way, more sharpening does not necessarily mean better quality. That's the advantage of being able to control both resizing and sharpening from the editing software. There has been many books written on the 'art' of sharpening.
Maybe you are looking for
-
Why do I get spanish on my mouse whenever I click right?
When I click left on the desktop it is in English but I when I right click on the webpage it is in spanish. I prefer to have it all in English as it was in the beginning. thank you
-
For example if the respondent chose blue as his favorite color the form response should be sent to Bob. If the respondent answered red, it should go to Susan.
-
How do I convert a pdf file into word doc.
I have been trying on my own to figure out the above question, to no avail. If anyone can help me, I would truly appreciatel it. Thank you.
-
I bought my sister a webcam for christmas. Logitech Quickcam Communicate STX. I'm trying to get it to work with her Ibook G4 and Ichat. I've Downloaded Macam, I can take still shots and movies but I can't get Ichat to see it, it see's the microphone
-
Bought music through iTunes on the iPhone, but music gone
I purchased an album ($7.99) from my iTunes app on my iPhone 3G before the iPhone update OS4. I then pluged my phone into the computer and did the update to OS4. Now, all my music is gone, and no where to be found on my iTunes on my computer. To my s