Too many recipients found for message type in the ALE model
Hello Friends,
Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP .
In the distribution model i have defined the sender receiver and message type clearly...
But in va01 after creating sales order extras ->Output->Hearder --->Edit
Output type-- BA00
medium --ALE
Dispatch time : Send Immediately
I am getting a error -
Too many recipients found for message type ORDRSP in the ALE model
Message no. B1130
Diagnosis
In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
Procedure
Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
Please help me in solving this error.
Regards,
jeevan
Hi Jeevan,
In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
Under the node ORDRSP, add the filter group for Customer.
Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
Hope it solves your Issues.
Regards,
Anbalagan.
Similar Messages
-
Too many recipients found for message type ORDERS in the ALE model
Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth -
ALE settings error "Too many recipients found for message type" urgent
Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
ThanksHi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub -
Too many recipients found for message type (Distribution model)
Hi,
I wanna send Dilvery note using message type DESADV from a SAP system to another non-SAP System.
I have Created port partner profile and distribution model.
But the Problem is the same message type DESADV is used to send Dilvery from SAP System to another SAP Client.
Idoc getting failed and throwing error stating Too many recipients found for message type DESADV in the ALE model .
I am sure we can create the more than one recipients for same message types. I have done it some time back. Any help highly appreciated.
Regards
RajThis message pops up when SAP can't identify how to distribute the IDoc based on the settings in BD64. Take a look at the settings there, most likely you'll need to add a filter.
The big ALE/EDI/IDoc book suggests that the same IDoc may be distributed to 2 different systems but specific details are not clear. It seems that one system should be configured first (it does mention a need to use a filter) and then somehow menu Edit -> Model View -> Distribute should be used.
I've never done it myself though and have only run into that error when I missed some filter settings in BD64. Hope this helps. -
IDoc Error: No recipient found for IDoc message type in the ALE model...
Hello Experts,
I just created an IDoc for purchase orders and when I try to test it after releasing
the PO, an error is shown in the processing log saying that there are no recipients
found for my message type of the IDoc. I refrenced it against a working IDoc but I might be
missing something.
Hope you can help me guys. Thank you and take care!hi,
in bd64 ,goto change mode select ur distribution model and click add message type define ur logical systems and message type and save.
thn goto environment - partner profiles - f 8.it will show whether model is created or any errors.
then go back edit - model view - distribute.
reward points if hlpful. -
ALE with BAPI; No recipient found for message type
We have to send sales activities from an ECC-system to CRM and tried to do this with message type SFADPSA and Idoc SFADPSA01.
When adding this message type to the distribution model (transaction BD64) we got the SAP-message to use a BAPI instead: IF1037SR with method RECEIVEPARTNERSALESACTIVITY. So we did.
To trigger the Idoc, we customized an output type, with transmission medium ALE, program RSNASTED and processing ALE_PROCESSING.
When processing the output type we get an error B1 129: "No recipient found for message type SFADPSA in the ALE model".
Analysing the error I found out following: during processing (RSNASTED, ALE_PROCESSING) function module MMODEL_INT_VALID_GET is called. This FM only looks into table TBD05, in which no entry for message type SFADPSA is found.
However, also function module BMODEL_INT_VALID_GET exist, searching table TBD06.
This table does contain an entry for the above BAPI and method and would not lead to an error message.
Obviously this last FM should be called, but this never happened...
Has anyone a clue?
Do we use the correct processing code?
Another message type to use could be SFADSACTIVITY, but this message type has no Idoc type assigned.Hello Wolf,
This error message come while determing the distribution channel.
This error come from one of below includes. Can you please put a break point and swich update debugging on and check whether the program is populating reuqired parameters to determine the distribution model. by doing this you can understand what is going wrong....
LBDMOU17
PCHEAF01
PCITEF01
RBDSECOP
RBDSEGLM
if you are not able to check this let us know..
Regards
Naresh -
Process Code for Message Type LOIPRO(in ALE/IDOCS)
Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjalyHi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM -
ALE error "Too many recipients "
Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
ThanksHi,
Please refer the link below:
http://www.jt77.com/CRM/related-discussion-6255.html
Thanks,
Sriram Ponna. -
Error in ALE service 29 Could not determine recipients for message type MAT
Hi Experts,
While transferring the material using ALE am getting error 29 ie 'Error in ALE service' and message is 'Could not determine recipients for message type MATFET'.
Also i ve recieved the materials with the proper status al the end am getting the above error.
Kindly help me out.
Thanks in advance.Hi ,
Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly in WE20 in sender system.
Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
Regards
Vikas Chaudhary -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Message no. B1003""Could not determine recipients for message type ACPJMM""
Hi All,
While posting GR in MIGO, an error is showing. I am attaching the error description.
""Could not determine recipients for message type ACPJMM""
Message no. B1003
Diagnosis
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Yesterday it was not coming and GR was getting posted.. I was doing configurations for CIN and day before yesterday everything was done,all the registers were getting updated. For that I did many customisation in SPRO. I did settings in tax ion goods monement. and in Material master to assign screen sequence for foreign trade data screen. Is any customozation triggerring IDoc? Earlier also this came, that time we got client copy, but the problem is recurring. Its very urgent as we are going to transport SPRO settings to production.
Solutions will be rewarded.
regards
B Shar
Edited by: Ian Wong on Jul 4, 2008 4:48 PMHi
If you are not working with ALE & this message comes, then somone has mistakenly activated ALE linkages for IDoc Output in Accounting.
if you want to keep this active & go forward, you need to complete the Distribution model customizng in BD64.
Thanks & Regards
Kishore -
Could not determine recipients for message type HRMD_B
Hi,
I am getting below Error in SRM when transferring Org Structure data from HCM system to SRM system in a Idoc. I am using Message type HRMD_ABA and not HRMD_B. I didn't maintain Distribution model for HRMD_B. But in my IDOC status I am seeing below error message for Message type HRMD_ABA Inbound to SRM.
Only I am seeing HRMD_B message type in transactions WE81 and WE82.
Any idea? I appreciate your help.
Could not determine recipients for message type HRMD_B
Message no. B1003
Diagnosis
An IDoc of message type HRMD_B was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Thanks,
ShearsHi Shears
Did you find soulution to your issue ??
thanks
Anup -
Error In MIGO "Could not determine recipients for message type ACPJMM"
Dear all,
At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
System Diagnosis is as below
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
I have check the ALE Settings in we20 and we21
and have assigned the following message types under Logical syste Partner Type
Outbound
ACPJMM
MATMAS
MBGMCR
RSINFO
RSSEND
WHSORD
Inbound
ACPJMM
DEBMAS
FTDABA
FTDACO
FTDACU
INSPECTIONPLAN_CREATE
MATMAS
MBGMCR
RSRQST
WHSCON
I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
I have checked all settings is SALE and they are Fine.
This is a single system
Please help this is really ugrent
Regards
Suhail JohnHi,
Goto table TRWCA (T Code SE30) and deselect all the checked entries.
This should solve your problem.
Regards,
Priyadarshi -
Distibution Model- Outbound parameters for message type could not be found
Hi SRM Gurus,
Have you ever encountered this error while buidling Distribution model in BD64 -
When I try to generate partner profile, I am getting this error-
Outbound parameters for message type BBPCO BBPCO01 could not be created
Partner not found in partner table
This error is occuring for all message types.
Please let me know the solution if anyone has encountered this error before.
Thanks & Regards
KapilHi
Are you geting this error while generate partner profile?
hope your sender and receiver logical system are correct.double check.
VERSION 3
OUTPUT MODE - tRANSFER idoc immediately option
connectivity between both sytems are ok.
did you save modelview ?
now ports automatically created . check we21 ,we20..
check your sm59 rfc destination? what type connection you made ? hope you maynot do mistake. howevercheck itup.
ask basis consultant assistance why ports anot genrated for backend system after you executed
tbd05 - do yo have entry ?
regards
muthu -
Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.
I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help
Maybe you are looking for
-
Adobe Photoshop CS6 Extended - 3D Disabled
Hello folks how do you do? Well, I'm experiencing a problem using the 'Adobe Photoshop CS6 Extended'. In general the 3D feature doesn't really show up in my screen. What can I do? Please some one? Here's my System info: Adobe Photoshop Version: 13.0
-
I am stuck. I cannot open the EMC or EMS on either the Exchange 2010 server (all roles are on a single server) or on another server that I have the management tools installed on, both of which are Server 2012 R2. I keep getting Access Denied, thoug
-
Creating layered line art mesh grids
I would like to create some artwork in illustrator which is based on the same styles as seen here > link to image However, I am not sure of the best way to do so - I think it may be best to create basic grids and then distort them I also want to make
-
Hi Team, I am trying to upgrade my DMP(4400G) from 5.2.1 to 5.2.2 version. During the last upgrade from 5.1 to 5.2.1 few units got some problem. Now these units are not discovered by DMM or even i don,t get Display(CISCO page with IP add). I tried to
-
Photoshop not printing in color
I have photoshop cs4 and i'm trying to print to a Toshiba 6520c color copier. I set it to print in color but it only prints black and white. All the other cs4 products will print in color. Has anyone else run across this problem. photoshop will print