Too many sequences for a project?

Hello,
Was wondering if a project can have too many sequences...not open...but just in the project.
Silly questions I'm sure...but can't find the answer...thank you in advance!
Best to all,
Michael

But as noted in the other, duplicate thread, projects can get squirrelly when they reach a certain size.

Similar Messages

Working with 30 Camera angles in multicam sequence, best workflow, too many cams for system to play all at once

Working with 30 Camera angles in multicam sequence, best workflow, too many cams for system to play all at once

Get a halfway decent system, something like:

Is it possible to have too many keyframes in one project in Premiere?

Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digi

Bill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi

11g-[nQSError: 42029] Subquery contains too many values for the IN predicat

Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckeng

ckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v

Too many lines for CO-PA assessment postings in KSB1

Hi Experts,
I created an assessment cycle in KEU1, with one segment, using an PA transfer structure (several cost elements to several value fields), and I´m using one single secondary cost element (category 42) to credit the cost centers.
When I execute the assessment via KEU5, the credits in the cost centers for the cost element category 42 generates too many lines (for example, I had 3 postings to 3 primary cost elements and in KSB1 I have 9 lines of "credits" - operation KSPA.):
Primary Cost Elements:
4110201004 ==> 3.000,00
4110209009 ==> 2.000,00
4110209013 ==> 1.000,00
Secondary cost element (after settlement through KEU5):
6519999999 ==> 134,36-
                            198,92-
                            190,49-
                            291,54-
                            548,27-
                            311,88-
                            2.659,89-
                            1.268,02-
                            396,63-
Do you know how can I summarize this postings to have only 3 (ore one) line for the secondary cost element? I cannot identify what was the criteria used by SAP to generate 9 lines.
Kind Regards
Mayumi

the number of line item crediting the cost centre, shall be the same of the line item required in the COPA posting. So the more receiver you have in COPA , the more line item are created.
Paolo

How many photos are too many photos for iPhoto? When do I need to upgrade to Aperture?

How many photos are too many photos for iPhoto? When do I need to updgrade to Aperture?

Hi Terrence, this is what happens, all too often when I click on something, sometimes it takes me 5 more clicks on the mouse while moving the cursor around to get rid of it. The one below popped up as I clicked on my junk mail.
The next one popped up when I was trying to get on to a site. This happens all the time. Don't know why it is happening. It happens on iPhoto, Aperture, everywhere I go, FaceBook...everywhere and at any time. So frustrating. I don't know if this is normal, but this was happening just before my last mac died a year ago.

"Bad Data, too many results for shortname"

Every 10 minutes since October 13 the wikid error log has recorded the following error message:
*"Bad Data, too many results for shortname: username"*, always naming the same user, who is not actually doing anything.
Coinciding with that message at the same time every 10 minutes, the system log records 13 or 14 of the following:
*"Python\[15645\]: ••• -\[NSAutoreleasePool release]: This pool has already been released, do not drain it (double release)."*
15645 is a process owned by _teamserver, which would appear to confirm the connection between the python and wikid error messages.
Last clue: The messages (I have determined in hindsight) started while I was setting up the server to do vacation messages. The user named in the "Bad data" messages was the user who wanted to (and did) set up a vacation message at that time. They worked, too.
Anyone have any ideas about what is going on and how to fix it? BTW, google does not find even one page where this "Bad data" error message is mentioned.

Thanks for your response. To answer your questions:
+Are you using AD for your directory?+ No. OD master only.
+Are there users with duplicate shortnames in your directory system?+ No, and to double check, I searched with WGM and only the one came up.
+As a bit of background, the wiki server keeps an private index of user and group information so we can track user preferences, and the "Bad Data, too many results for shortname: username" error is triggered when we do a lookup in that index for a particular user and we (unexpectedly) hit duplicate entries. Are you seeing an issue with using the software, or just an annoying log message?+ It's hard to say (for me) what might be related. The directory or wiki related issues with the server include:
• A memory issue with slapd that eventually causes it to crash. (preceded by lots of "bdbdbcache: db_open(+various: sn, displayname, givenname, mail, maybe others+) failed: Cannot allocate memory (12)" and "logging region out of memory" and "index_param failed" errors.
• The wiki is slow, despite very light use.
• Wake from sleep (network clients with authentication required) can be very slow. Several minutes even.
Any suggestions you may have would be appreciated.

Acme GiFEncoder: java.io.IOException: too many colors for a GIF

I have been using the Acme GifEncoder to save images as gifs. I have been using this quite successfully until today. For some reason it now gives an error when I try to use this in some circumstances. The exception is:
java.io.IOException: too many colors for a GIF
I am not sure why it will work in some situations and not others. If anyone can give any insight on this problem then I would appreciate it.
Thanks

Thanks for the reference to the quantizer. I will try it out and see if it works.
That is going to lead me on to have a bit of a rant about GifEncoders. I realise that gifs are limited to 256 colours. It is ridiculous that a GifEncoder would not limit the number of colours for you. If you have an image in another format such as jpg that does not have a limit the number of colours, the encoder is not able to convert it into gifs unless it has the number of colours reduced. As far as can tell this should be an essential function of the encoder, unless anyone can tell me differently.
Also if anyone can advise me on the Acme JpegEncoder I would appreciate it. It does not seem to work in any shape or form. I am not trying to do anything in particular with it now, so I have no code to show. I did try to use it before and it did not seem to work, so if anyone knows how to get it to work that would be great.
Once again, thanks for your help.

Multisim 2001 "too many parameters for subcircuit" error

When simulating circuits in Multisim 2001 with op amps from User library am getting Netlist Error message "Unable to correctly determine the nodes for the current circuit due to the following reasons:
Too many parameters for subcircuit type lf156_op_amps_1 (instance: xxu3)"
or a similar message for whatever op amp am using. Have tried creating components for several different op amps and always get same error message. Carefully checked the Pin Mapping Table and the symbol pins are correctly matched with order of pins in model. The only way have been able to get a simulation to run with op amp components in the User Library is if copy an op amp directly from Multisim library to User library and make no changes whatsoever. But if do something seemingly minor such as bring up the Symbol editor and add a text note underneath the symbol then get the "too many parameters for subcircuit" error.
Am also getting a Consistency Self Check error stating "Error: The circuit it empty. Simulation requires at least one ground." Do have ground in circuit; presumably this error is related to Netlist error above.
Operating system is Windows XP Professional.

Well, this is an interesting situation in Multisim 2001. I tried doing this with another component and had the same results. I just renamed the part with no other changes and re-saved it to my database and sure enough I got this error. I have no idea what is causing this other than just a bug in the software. Us 2001 users will just have to live with this unless someone does happen to find a solution.
I don't seem to have any problems when creating new components and using or editing existing symbols with new model information. This does suck. What if just wanted to edit one paramenter instead of using a completely different model? I really hope someone can find a workaround or solution to this. I am glad you broughtm this to our attention.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Access 2010 table has too many fields for web database - how to split into two web-compatible tables?

Hello,
I'm in the process of converting an Access 2010 database into a web database and I'm having some trouble. I have a table which has 236 fields, which is more than the 220 field limit for web-compatible tables. I have tried to split this table into two tables
with a one-to-one relationship, but web tables can only use lookups as relationships. I've tried to connect the tables with a lookup and then synthesize a one-to-one relationship by using data macros but I'm not having much luck.
I realize that 236 fields is a lot, but it must be set up this way because each field represents a tasks and is a yes/no box to verify that the task has been completed - and the records are different employees for whom which the tasks need to be completed.
Could someone please help me figure out a way to make this table web compatible?
Thank you,
Ryan

Hi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/access-2010-table-has-too-many-fields-for-web/06ee81ea-24ab-48b8-9b8f-0ed08a868bac
Regards,
George Zhao
TechNet Community Support

ORA-00939: too many arguments for function using Timezones in xquery

Running on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
CREATE TABLE "ORT"."SAMPLE"
( "THEDATE" DATE,
"THETIMESTAMP" TIMESTAMP (6),
"STARTTIMESTAMP" TIMESTAMP (6) WITH LOCAL TIME ZONE,
"ENDTIMESTAMP" TIMESTAMP (6) WITH LOCAL TIME ZONE
REM INSERTING into SAMPLE
SET DEFINE OFF;
Insert into SAMPLE (THEDATE,THETIMESTAMP,STARTTIMESTAMP,ENDTIMESTAMP) values (to_date('13-06-10 14:07:52','RR-MM-DD HH24:MI:SS'),to_timestamp('13-06-19 14:27:52.000000000','RR-MM-DD HH24:MI:SS.FF'),to_timestamp('13-06-19 10:34:04.586000000','RR-MM-DD HH24:MI:SS.FF'),to_timestamp('13-06-19 15:05:38.805000000','RR-MM-DD HH24:MI:SS.FF'));
following query raises ora-00939
SELECT XMLQUERY('for $v in fn:collection("oradb:/ORT/SAMPLE")
let $date1 := $v/ROW/STARTTIMESTAMP/text()
let $date2 := $v/ROW/ENDTIMESTAMP/text()
return if ($date1 < $date2) then (concat($date1," date is less than ", $date2)) else (concat($date1," date is greater than ", $date2)) ' returning content) from dual;
ORA-00939: too many arguments for function
00939. 00000 - "too many arguments for function"
*Cause:
*Action:
any ideas?

Hi Odie,
Not too familiar with XQuery rewrite, but i suspect by providing this hint, Oracle cannot optimize the query whatsoever.... tried this hint in my actual query and basically hangs.... I will attempt at opening an SR with Oracle...
the other option i'm looking at is checking the date ranges outside of xquery, and using a mix of xmltable, xmlexists and the SQL XML functions to reconstruct my xml.

Changing activity id in proper sequence for entier project (or certain WBS

Hi,
Presently I am working on a schedule with more then 3000 activities. I need to delete a WBS with 200 activities and then paste another WBS with 200+ activities. The problem for me is that I need to change the activity ID so that the WBS should be align with the entier project. Is there any better way other then manually editing the Activity Id for entier project? I need to change the Activity Id so that it should reflect the proper sequence with the start date. Any help will be apreciated.
Thank you

2. you can also use a global change to change all activity id's. (no if line needed), by concatenating any 2 or more existing text columns or udf's you create for this purpose.
e.g. create 2 text udf's named "Sort" and "Sort_txt".
under edit/ user prefs / dates, uncheck month name and use MM-DD-YY format so that 30-Oct-09 displays as "10-30-09"
in the "then" field of the global change add the following lines:
sort_txt = Start Date (you need this to convert a date field to text)
sort = leftstring(sort_txt,5) (to extract the first 5 characters of sort_txt as defined in the previous step, that is "10-30"
sort = sort & '-' (to get "10-30-")
sort = sort & WBS Code (to concatenate "10-30-" with WBS Code or any other field for that matter)
you can always use "Start Date" or the newly created "Sort" to sort your activities. I wouldn't mess with Activity ID too much if I were you, but if you must..
keep Activity ID as simple as possible as a project default option (0001, 0002, 000x...) and add a final line in the global change:
Activity ID = Sort & Activity ID (that is because you need a unique Activity ID). you should get something like 10-30-AAA-0001.
it is safer not to play with Activity ID too much in global changes. that's why i use as many udf's i need for intermediary steps and change Activity ID in just one final line.
OR if you feel more comfortable to work with the udf in excel,
export "Sort" as a column in xls
populate it in excel with 0001 to xxxx with the activities sorted by Start Date (as explained earlier)
reimport the project
run a simple global change such as:
Activity ID = Sort
or
Activity ID = Sort & <any field you want>
caution: there is no undo for this. practise on a backup copy of the project. don't forget you need a unique Activity ID.
good luck
Edited by: Tibi on Oct 9, 2009 5:17 AM

What to do if you have too many devices for 1 apple Id

I have too many apple devices to sync. Only one apple I'd at the moment. I am trying to figure out what to do? I have 3 iPads a 2 iPods and 1 iPod touch and an iPhone that I want to use the same overall library of content. What should I do when you can only have a maximum of 5 apple devices on one computer? Sorry not an apple genius.

If you asking me, I would suggest to additonally use a second storage service which also allows you to store your pictures over the 30 days period. I personally use Dropbox with automatic upload for that (https://db.tt/cMEgDUFZ), but there are also other storage services like Flickr for example.

Too many columns for Custom report

Hi,
I'm building a custom XML Publishe report, the O/P will be in excel format.
Problem is that i have too many columns...around 30 which are extracted to excel sheet.
How should i create RTF file with these many columns?
Any suggestion?
Database:10g
Thanks.

Hi,
try the Oracle BI Publisher forum (BI Publisher as you are using XML Publisher.
Regards, Roberto

Too many events for FCPX?

I have a fairly large project where we filmed close to a hundred locations. We categorized each of those locations as an event. Now when we launch FCP, it seems to be too much for FCPX. Searching across multiple events takes quite a long time while FCP "preps" the media.
My solution has been to make a folder called "Final Cut Events INACTIVE". I then drag all the events that aren't being used in a given project to that folder so that FCPX will perform better. The problem is that our main edit needs some content from ALL of those events, so I really need all 100 events available.
So basically I'm asking if others have this kind of event-overload performance issue. If so, what are solutions? Certainly I could get a faster HD. Right now I'm using an external FW800 2TB drive on a brand new iMac 3.4 i7 with 16GB RAM. So that's a pretty decent setup. I hate to drop a ton of cash on a Thunderbolt RAID just so I can access 100 events easily. That seems unnecessary.
The FW800 drive plays back our native, unoptimized MTS media just fine (re-wrapped as MOV), so generally speaking, it performs quite well. I guess I just find it disappointing that FCPX doesn't ahndle a lot of events well unless there's something I can be doing to manage them better.
Also, is there a way to temporarily deactivate an event without resorting to my solution of moving it to an INACTIVE folder?

You don't say how many clips there are.
I have over 5,000 clips (some of 15 or even 20 minutes but most less than 25 seconds). These are split between ten events.
I have a 2 x 2.26 GHz Quad-Core Intel Xeon Mac Pro with 16GB RAM.
When I click an event, it opens more or less instantly.
I suggest you have fewer actual events, and use keywords to categorise the locations.
It would be easy to do - just select all the clips in one event and press Cmd+K to add the location keyword to every clip, then drag the clips into an event.
Andy

Too many sequences for a project?

Similar Messages

Maybe you are looking for