Too many users in terminal when i look at who

Hi, i know there was discussion earlier (i tried to search without luck) about users shown in terminal using who command. There (if i remember correctly) should be 1 console + 1 each open terminal.
i for some reason have 1 + 3 with single terminal?
freemem console Nov 6 15:20
freemem ttyp1 Nov 8 22:04
freemem ttyp2 Nov 8 22:24
freemem ttyp3 Nov 7 16:44
with command w i get:
freemem console - Mon15 2days -
freemem p1 - 22:04 - -
freemem p2 - 22:24 - w
freemem p3 - Tue16 29:19 -
Any idea's?
New mbp with 10.4.8 all updates done, clean install + migration assistant used to import accounts (from intel iMac 10.4.8).

Ah thanks, reboot did the trick and ill try relog with tty back and exit the next time.
I use terminal every day and this was the first time i had those hanging out, i must of just forgotten to exit out normally
Minor yet interresting issue solved thanks again all.

Similar Messages

  • Trying to download a movie on a laptop.  tellls me i can't play it on that computer because my apple account has too many users.  how do i see who is listed as a user so that i can delete one if it's not needed

    trying to download a movie on a laptop.  tellls me i can't play it on that computer because my apple account has too many users.  how do i see who is listed as a user so that i can delete one if it's not needed
    please help
    [email protected]

    The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
    I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
    As for the Scan button not working, the following is documented by HP
    Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
    But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

  • Livecache issue LC10 BY0 Too many users (task limit)

    Hi,
    we have 2 application servers with one CI/DB, maxusertasks is 500
    we figured out a livecache pb, with the following error messages
    (db analyzer)
    LC10 BY0 > Too many users (task limit)
    User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SAPAPO_CLEANUP application pid
    User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SIM_SIMSESSION_CONTROL, pid 31685
    ...User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : APS_ACT_SCHEDULE, pid 3168
    before  we had the warining:  UTK5 is running 1804s, CPU 50% and CPU 100% (LC)
    we have checked knldiag/knldiagerr files and we are unable to find what is the root cause of the problem?
    How could we analyse this issue and find the treatment which triggers this issue?
    (trace: (SAPAPO/OM01)
    Thanks and Best regards,
    any help would be rewarded.
    Best regards,
    John
    Edited by: DCWE COREADMIN on Feb 11, 2011 6:54 PM

    Hello John,
    We need additional information about the liveCache version, OS of the liveCache server; more details about situation when the issue occurred. Run "x_cons <SID> sh all 10 10 > task_info.txt" when the issue occurred to collect more information.
    Check if the savepoint task is active - "x_cons <SID> show active".
    Is the issue occurred during high loading to te liveCache?
    Please review the SAP note 1391322 where the SPORADIC standstill in high load situation is also described, this issue is already fixed in the new liveCache releases.
    This situation occured sporadically. It will be helpful to login to your system for further analysis of the reported issue to get clear if your system run into this known problem because the savepoint was hanging, because of that you had  big amount of the user tasks which were hours in the state 'Prep-End' until the liveCache restart.
    < It could be the reason for "livecache issue LC10 BY0 > Too many users (task limit)", you reached the MAXUSERTASKS limit,
      the increasing of the liveCache parameter will not help you to solve the issue. >
    You checked/saw the Database Analyzer log :
    "User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SAPAPO_CLEANUP application pid
    User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : SIM_SIMSESSION_CONTROL, pid 31685
    ...User task 281 blocked in stae 'Prep-End(230)' since 902s, DB procedure : APS_ACT_SCHEDULE, pid 3168
    You are SAP customer. As already recommended by Ivan, create the SAP message to the component "BC-DB-LVC" and get SAP support.
    Thank you and best regards, Natalia Khlopina

  • Can't connect to Server - "too many users" after 10.8 install

    After upgrading my Retina MBP, my Air, and my mid-2011 iMac (which acts as a file server) to Mountain Lion, I find I cannot consistently connect to the iMac server. Everything is done over an Airport Extreme wifi network, and there were no issues in 10.7. It usually happens 24-48 hours after a retstart, and a restart will fix it though that is inconvenient. The error given on the machine trying to connect in is "too many users" on the host (the iMac server). Any thoughts?

    Me too... similar setup. MBPr, MBP and an old MB with a Mini/drobo as a file server. A reboot fixes it, but that's a pain if I'm not home.
    I have noticed that I can usually share the screen even if I can't mount a drive, which helps, but still just another hurtle.

  • Why do I get a too many http redirect message when accessing top charts in App Store?

    When trying to access Top Charts in the App Store I get a message stating "too many http redirects". I don't get the message with featured apps, updates, etc., just top charts. How can I fix this?

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • Phone is locked, too many passcode attempts. When I try to restore it won't proceed until i enter the passcode which the phone won't let me. I'm stuck. Help

    My iphone 4 is locked because my son tried to enter the wrong passcode too many times. The solution on apple support says to restore it. But when I try to restore after about 10 minutes of software update it comes up with a message that it cannot continue until you enter the passcode on the phone. But the phone  is locked and you cannot enter the passcode. I'm stuck. Help!?

    You can still bypass this but deleting all of the contents of your iPhone, but of you previously backed up from iCloud or iTunes you can recover te files as it used to be,
    You have to download a copy of iOS software you wish to recover to, you can get from google by typing it, iOS 5.1.1 iPhone 4 etc and find links, once downloaded. it should be IPSW file,
    Turn your iPhone into "DFU" mode by holding sleep/wake button and home button at the same time, you can get tutorials from google or YouTube.
    once done connect to iTunes, note this is the important step, before attempting to recover you should hold "shift-key" at the same time click check for updates or recover, from if it doesn't detect the file here's a link on how to do it, but this link is iOS 4.3 the difference is you will use iOS 5 or later. http://techie-buzz.com/how-to/how-to-update-ios-4-3-itunes-manually.html
    after updating or restoring,
    Congrats you bypassed your password and now restore your back up from itunes.

  • Upgraded to new MacBook and now Office activation is declined because of too many users.  How do I delete Office registration for my old computer?

    Help please.  I upgraded to a new macbook and migrated everything.  However, Office will not activate because it says too many copies are active.  How do I delete the activiation for my old laptop?  Thanks.

    Use the Office activation phone number and call the automated activation menu. It will ask you how many installations you have. It will then issue you a new code for your new installation. Make sure your old installation is removed.

  • How to send notification when too many users connected

    Hi all !
    I need to send a notification from my web container when there are over 100 users connected, does anybody know how to do it without using vendor's Api but just JEE Api ?
    thanks
    Luca

    mark1970__mtb wrote:
    Hello,
    If you create an object that implements javax.servlet.http.HttpSessionBindingListener,
    you can define valueBound and valueUnbound methods. I usually call it a User class. Also you
    can have a static int, counter, in this class, which is accessible by all
    classes (make it public or create increment, decrement and getValue methods). In
    the valueBound method, get it to increment the static int, in valueUnbound call
    decrement).
    Now in the JSP pages, at the top, check if the User object exists in the Session
    scope. If it doesn't, create one and add it to the Session. This will
    automatically call the valueBound on that object and increment the counter. When
    a persons session expires, or the User object is removed from the session, the
    valueUnbound is automatically called and the counter decrements.
    I usually make this check a seperate JSP page which I include on all the other
    pages. Then all you need to do is get the User.counter value at any time to see
    how many people are on the system.
    Hope it helps
    Mark
    Don't link spam, please.

  • I have 2008 microsoft office with three license keys. i bought my daughter a new make and wiped her older mac. question is when i did this it says there are too many users for program  how can i figure out where product key is

    I have microsoft officemac w 3 licenses. I have one key on one computer and the second key on another. Problem I bought daughter new mac (3rd computer) and put on key on her new computer. With her old computer we wiped it to back to factory etc. Then I added a product key for officemac on old
    est computer. Now when I use my wiped computer it comes up saying that all product keys are taken. How do I check to see if she has the same key number as the old one I have? I have paid for three but her computer and my old one must have the same key number. I need help in checking key numbers so I can set it right. Thanks 

    Office 2008 for Mac error: "Microsoft Office 2008 ... - Microsoft Support

  • File sharing reports too many users connected

    SPECS: Mac Mini Core 2 Duo 2 GHz, 2G RAM, Mac OS X 10.6.4. Other users in office also running similar hardware and Mac OS X 10.6.4.
    CLARIFICATION: This Mini is used as a file server in a small law office (4 other workstations). It is running Mac OS X Client, not Server. I refer to the machine as "the server" but wanted to be clear the operating system is the same on all stations.
    HISTORY & CONFIG: This system was setup in November 2009. It provides simple file sharing storage for a 4-user law office and runs Retrospect (version 8.1.626) to do some local and network backup operations. At the time it was setup, it was also running Now Up-to-Date Server but that program is no longer supported, and it has been removed from the computer (May 31, 2010). In late March 2010, I installed Daylite Server as a replacement for Now Up-to-Date. All stations are running Mac OS X 10.6.4, and have always been at the most recent Mac OS X 10.6.x revision within a few days of the release of a major update.
    PROBLEM: Occasionally, clients cannot connect to the server (and I don't have the exact error message -- next time it happens, someone is supposed to get a screenshot). When this happens, if you go to the server and open the file sharing control panel, then click "options", you will see an impossible number of people are connected. The first time this happened was on April 28, 2010, when it reported 41 users were connected. Mac OS X Client has an upper limit of 10 simultaneous user connections, so you can see this number is not possible. Additionally, these are "phantom" logins because you can execute this command in Terminal to see the IP addresses of any connected users:
    netstat -n | grep '.548'
    And when I do this, unless there was someone who had logged in prior to the "phantom explosion", it never shows any connections. On two occasions, I've actually been in the office late one night to do maintenance, checked the server before I left and found 0 connected users, then got a call in the morning that the first person who attempted to connect was blocked and the server showed 10 or more users connected.
    I do not believe this is some kind of security breach. The server is not Internet-accessible, and as is shown by the netstat command, there really isn't anyone logged in anyway. I consulted with Marketcircle (makers of Daylite) because it seemed very coincidental that I installed their software just prior to the beginning of this problem, but they claim Daylite does not make any use of the Mac file sharing system. But, again, since these aren't real users, I suppose it's possible a bug in their software is somehow upping the Mac's connected user count erroneously?
    Restarting the server always fixes the problem -- until it happens again. This Mac Mini is a pretty simple station -- just runs Daylite Server and Retrospect Single Server, plus the basic file sharing. Anyone have any ideas why this keeps happening?

    I would say odds are likely this is correct. On at least two occasions I can think of where I verified everything was okay and later discovered a "phantom explosion", a Retrospect backup would have run. Our backups typically run at 3 AM. Is this a known issue with Retrospect? If so... not sure why it doesn't happen all the time. And in my own office I have a pretty similar setup on an entirely different computer that multiple people connect to, and it never does this. Color me confused.

  • Too many fields QE-3018 when trying to change manager password

    Hello, we are seting up a new database, we have uploaded tables with data transfer and copy express, and when trying to change the manager password we are getting this message.
    thank you.
    Jose.

    Hi,
    Check the below note 1304754:
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1304754|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1304754]
    Warmest Regards,
    Chinho

  • IMessage sync problem - too many users

    My partner and her kids currently use the same iTunes a/c. Is there any way of isolating the kids iPod Touch's from mum's iMessage app? iTunes a/c each is the easy option, but then they lose access to all songs and apps etc they have purchased...???

    Add additional email addresses for each child to your Apple ID account here: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/561/wa/directToSignIn ?wosid=1HFr6YOHXeHtC4m5410IyM&localang=en_UK
    Then on their devices, head to Settings -> Messages, scroll down and tap Add Another Email.  Once you have added the additional email, head back to the main Messages settings window and tap your own original Apple ID email.  It should open the email address in a new view with an option to remove it underneath.
    B-rock

  • [database design]  the "too many" number of users of one instance!!

    Good morning everyone!!
    I have a question about the number of users of one db
    instance, "possible problems" caused by too many users,
    and "pros and cons" of this case.
    Now, the company I work for is considering centralizing
    150 db servers of 150 sites. 150 chained-stores have
    their own db instance.
    Here is the structure of db instance after the
    centralization.
    1. Centralized instance has each user per site(150
    sites), for example, site001, site002, …site00n, …
    site150
    2. Each user has its own 250 tables, thus the db
    instance become to have 150 users and 150*250 tables.
    3. Each user has almost the same table schema, not
    exactly. There are a little bit of differences among
    the business rules of each sites.
    4. the version of centralized db instance is "oracle9i".
    Theoretically, it seems like there is no problem, but I
    have not experienced the db instance like this, which
    has "too many" users of 150 users.
    In terms of every aspect such as "performance/tuning",
    "system management", or "something else", I would like
    to hear what could be "the pros and cons" of this
    structure.
    Assuming that there are possible critical problems caused
    by too many users, what could be the alternative choice?
    I will be waiting to hear your experience. Every response
    will be appreciated, even if it is not about what I asked.
    Thanks for your interest in advance.
    Have a nice day.
    Ho from Japan

    Have a look to following AskTom threads:
    http://asktom.oracle.com/pls/ask/f?p=4950:8:4685256847630125933::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:31263903816550
    http://asktom.oracle.com/pls/ask/f?p=4950:8:4685256847630125933::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:63447102315094

  • HT6020 Entered wrong code too many times and when I was trying the right way now it asks me to contact support

    I entered iCloud key chain code wrong too many times and now when I am entering the right way it's asking me to contact support

    Hello, Maddineniramu. 
    Thank you for visiting Apple Support Communities.
    I would recommend reaching out to us via the link below to assist you with this issue.
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • Exchange 2010 dynamic distribution group - too many entries in results

    Hi
    I've inherited some dynamic groups that were created on exchange 2003 [about 50 groups]. When I run the following query I seem to get far too many users returned [looking via ADUC the group should have 2 users]. How can I ensure I get the correct results?
    Get-Recipient -RecipientPReviewFilter (Get-DynamicDistributionGroup -Identity "All Staff IT").LDAPRecipientFilter | Select Name,PrimarySMTPAddress
    Thanks

    Hi,
    How about filtering members in EMC?
    I think the abnormal result related to the filter conditions.
    How about the command that Rich provided?
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

Maybe you are looking for