Too Much Inactive RAM, Too Little Free RAM
I used to have a 2007 iMac running Snow Leopard, and I switched to a 2011 iMac running Mountain Lion. On both of my computers, I kept running out of free RAM after a while, and my inactive RAM kept taking up all my free RAM. It still does it. I end up with around 30MB of free RAM, a reasonable amount of active RAM, and a massive amount of inactive RAM after a few days, then my computer slows down a lot.
I have to keep flushing the inactive RAM with a memory cleaning tool or else my computer slows to a crawl. Repairing the permissions is supposed to clean out the inactive RAM (thanks, Tuttle), but alarmingly, this doesn't work for me. There must be something causing this problem, and I want to find it. How do I do this? Can processes currently running be using inactive RAM, or is that only possible if they have just been closed? Is there a tool that can check how much inactive RAM is allocated to each process?
P.S. To make it clear: I know that I'm not supposed to worry about inactive RAM and let the system do its own optimization, but it must not be doing it right because it's causing extremely noticeable slowdowns. The computer is like a Geo Metro pulling a whale if I don't flush the inactive RAM periodically.
Since you are so concerned, take your iMac to your local AS or an AASP for a FREE diagnostic test. At least you will have piece of mind when you get a confirmation of what is really going on.
Similar Messages
-
Too much inactive RAM + EtreCheck results
Hi, I noticed that my macbook pro is getting slower and slower, even though I close applications that are not being used.
Right now my RAM is the following, with only two applications open, chrome and email.
Out of 8Gb RAM laptop:
Wired: 1.17Gb
Active 1.8Gb
Inactive 4.62Gb
Free 409Mb
Etrecheck report:
EtreCheck version: 2.1.8 (121)
Report generated 19 March 2015 12:58:07 PM AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2-core
8 GB RAM
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 775
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
Mac OS X 10.7.5 (11G63) - Time since boot: 1:44:36
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 749.30 GB (101.31 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Configuration files: ℹ️
/etc/hosts - Count: 1
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) [Click for support]
[not loaded] com.LaCie.driver.PXHCD (1.0.11 - SDK 10.6) [Click for support]
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.12) [Click for support]
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.12) [Click for support]
[not loaded] com.devguru.driver.SamsungComposite (1.4.18 - SDK 10.6) [Click for support]
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) [Click for support]
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) [Click for support]
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) [Click for support]
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.5) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.18 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.4.18 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungMTP (1.4.18 - SDK 10.5) [Click for support]
[not loaded] com.devguru.driver.SamsungSerial (1.4.18 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.bjango.istatmenusagent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[unknown] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.sierrawireless.SwitchTool.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[unknown] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.facebook.videochat.[redacted].plist [Click for support]
[loaded] com.google.GoogleContactSyncAgent.plist [Click for support]
[failed] com.wondershare.mobilegodaemon.plist [Click for support] [Click for details]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Unity Web Player: Version: UnityPlayer version 5.0.0f4 - SDK 10.6 [Click for support]
Flip4Mac WMV Plugin: Version: 2.4.2.4 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 4.0.60531.0 [Click for support]
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
npNASAEyes: Version: Unknown
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Perian [Click for support]
Tuxera NTFS [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% Google Chrome
4% WindowServer
1% hidd
0% SystemUIServer
0% AppleSpell
Top Processes by Memory: ℹ️
215 MB Google Chrome Helper
172 MB Google Chrome
120 MB Mail
94 MB SystemUIServer
94 MB Finder
Virtual Memory Information: ℹ️
63 MB Free RAM
2.17 GB Active RAM
5.04 GB Inactive RAM
1.31 GB Wired RAM
1.17 GB Page-ins
14 MB Page-outs
Diagnostics Information: ℹ️
Mar 19, 2015, 11:12:02 AM Self test - passed
Mar 17, 2015, 01:32:57 PM /Library/Logs/DiagnosticReports/Kernel_2015-03-17-133257_[redacted].panic [Click for details]None of the usual problems are present.
Activity Monitor – Monitor Performance Problems
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Things you can do to resolve slowdowns see post by Kappy -
MacBook Pro being really slow and vert little free RAM.
Hi,
Just recently my MacBook Pro has been running really slowly when navigating between applications and tabs in safari. I checked to see how much RAM was free and it said only 30MB. I have no more apps open or things running than I normally do. This Mac is 6 months old but my old mac that was nearly 3 years old tended to run quicker, and as mentioned, I have no more apps running than I previously had. Maybe Word, Excel, iTunes and Safari. Can anyone help explain what might be making it slow and what might be hogging all the RAM?
Thanks
MattI ran the Etrereport and this is what i got back.
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 18 days 11:12:23
Disk Information:
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (298.86 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS41N
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.intego.netbarrier.kext.monitor (653)
com.intego.netbarrier.kext.network (653)
com.intego.netbarrier.kext.process (653)
com.intego.virusbarrier.kext.realtime (772)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.intego.commonservices.daemon.integod.plist 3rd-Party support link
[System] com.intego.commonservices.daemon.taskmanager.plist 3rd-Party support link
[System] com.intego.commonservices.icalserver.plist 3rd-Party support link
[System] com.intego.commonservices.metrics.kschecker.plist 3rd-Party support link
[System] com.intego.netbarrier.daemon.logger.plist 3rd-Party support link
[System] com.intego.netbarrier.daemon.monitor.plist 3rd-Party support link
[System] com.intego.netbarrier.daemon.plist 3rd-Party support link
[System] com.intego.netupdate.daemon.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.emlparser.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.logger.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.scanner.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
[System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
Launch Agents:
[System] com.intego.commonservices.integomenu.plist 3rd-Party support link
[System] com.intego.commonservices.taskmanager.plist 3rd-Party support link
[System] com.intego.commonservices.uninstaller.plist 3rd-Party support link
[System] com.intego.netbarrier.alert.plist 3rd-Party support link
[System] com.intego.netupdate.agent.plist 3rd-Party support link
[System] com.intego.virusbarrier.alert.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Mathematica: Version: 9.0.1.4055068 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
My eBay Manager: Version: 3.0.1.9
AdBlock: Version: 2.6.18
Searchme: Version: 1.2
YouTube5: Version: 2.6.7
FlashToHTML5: Version: 2.9
Plugin Customs: Version: 2.0.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Setup Assistant: Version: 14.2.0 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 186.63 GB
Destinations:
TIME MACHINE [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 2
Oldest backup: 2013-12-12 11:22:58 +0000
Last backup: 2014-02-12 17:21:07 +0000
Size of backup disk: Too small
Backup size 465.44 GB < (Disk used 186.63 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% mds
9% WindowServer
2% EtreCheck
2% Dock
2% Finder
Top Processes by Memory:
156 MB Finder
90 MB iTunes
86 MB systemstats
70 MB Safari
66 MB mds_stores
Virtual Memory Information:
1.02 GB Free RAM
1.13 GB Active RAM
492 MB Inactive RAM
740 MB Wired RAM
8.67 GB Page-ins
729 MB Page-outs -
Too Much Inactive Memory Useage
Hi,
I have a 2010 iMac running Mac OS X version 10.7.5.
I have upgraded to 16GB Ram but still have serious issues with the computer running slow sometimes are almost stopping because the memory usage seems to be too high.
I run quiet a few applications (mainly web browsers with multiple tabs). The main issue I see is the Inactive Memory is over 5GB. Is there a reason why this is so high? Is there a way to reduce the Inactive Memory?
Restarting the machine is a short term solution.
ThanksHi,
I have a 2010 iMac running Mac OS X version 10.7.5.
I have upgraded to 16GB Ram but still have serious issues with the computer running slow sometimes are almost stopping because the memory usage seems to be too high.
I run quiet a few applications (mainly web browsers with multiple tabs). The main issue I see is the Inactive Memory is over 5GB. Is there a reason why this is so high? Is there a way to reduce the Inactive Memory?
Restarting the machine is a short term solution.
Thanks -
Oc4j connection pool: too much INACTIVE connections
I am publishing an application - developed using Eclipse and previously published in Tomcat (where it works perfectly for a long time) - within corporate servers using Oc4j version 10.1.3. The database server is Oracle 9g.
After the deployment operation, the application seems to work, but that happens during the work by users, there are still many connections whith status "INACTIVE", until to complete all the available connections.
The datasource is set as follows:
<connection-pool name="ConnectionPoolRichiestaPubblicazione">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
user="REDAZIONE"
password="password"
url="jdbc:oracle:thin:@(DESCRIPTION=(FAILOVER=ON)
(ADDRESS_LIST=(LOAD_BALANCE=ON)
(ADDRESS=(PROTOCOL=TCP)
(HOST=10.146.2.86)(PORT=1521))
(ADDRESS=(PROTOCOL=TCP)(HOST=10.146.2.86)(PORT=1521)))
(CONNECT_DATA=
(SERVER=DEDICATED)
(SERVICE_NAME=XE)
(FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC)(RETRIES=180)(DELAY=5))))">
</connection-factory>
</connection-pool>
<managed-data-source
jndi-name="jdbc/RichiestaPubblicazioneDS"
name="RichiestaPubblicazioneDS"
connection-pool-name="ConnectionPoolRichiestaPubblicazione" />
The java code to establish a connection is as follows:
private Connection creaConnessioneDataSource(String nomedatasource) throws ConnessioneException{
LOGGER.debug("START");
try {
InitialContext context = new InitialContext();
DataSource ds = (DataSource)context.lookup(nomedatasource);
LOGGER.debug("URL DATASOURCE : " + ds.getConnection().getMetaData().getURL());
LOGGER.debug("USERNAME : " + ds.getConnection().getMetaData().getUserName());
this.conn = ds.getConnection();
catch( Exception e ) {
LOGGER.error("Errore nella connessione tramite datasource : " + StringUtils.getCustomStackTrace(e));
LOGGER.debug("END");
return this.conn;
Connections and statements are closed using the following methods:
public boolean chiudi(Connection conn){
LOGGER.debug("START");
boolean esito = false;
if (conn != null){
try {
conn.close();
esito = true;
LOGGER.debug("Connessione chiusa");
catch (SQLException e) {
LOGGER.error("Eccezione nella chiusura della connessione : " + e);
LOGGER.debug("END");
return esito;
public boolean chiudi(Statement stmt){
LOGGER.debug("START");
boolean esito = false;
if (stmt != null){
try {
stmt.close();
esito = true;
LOGGER.debug("Statement chiuso");
} catch (SQLException e) {
LOGGER.error("Eccezione nella chiusura dello statement : " + e);
e.printStackTrace();
LOGGER.debug("END");
return esito;
Here are a couple of examples of code that interact with the database:
public List<StatoRichiestaSintesi> getElencoStatiRichieste() throws ConnessioneException{
LOGGER.debug("START");
List<StatoRichiestaSintesi> listaStati=new LinkedList<StatoRichiestaSintesi>();
LOGGER.debug("Apriamo connessione e statement");
Connection conn = databaseManager.creaConnessioneDataSource(datasource);
Statement stmt = databaseManager.creaStatement(conn, false);
String sql="SELECT * FROM STATORICHIESTA";
try {
ResultSet rs = stmt.executeQuery(sql);
while(rs.next()){
StatoRichiestaSintesi temp=new StatoRichiestaSintesi();
temp.setIdStato(rs.getString(1));
temp.setDescrizioneStato(rs.getString(2));
listaStati.add(temp);
LOGGER.debug("Numero record trovati : " + listaStati.size());
} catch (SQLException e) {
LOGGER.error("Eccezione di tipo SQL : " + StringUtils.getCustomStackTrace(e));
finally{
LOGGER.debug("Chiusura di statement e connessione");
databaseManager.chiudi(stmt);
databaseManager.chiudi(conn);
LOGGER.debug("END");
return listaStati;
Below is another example using PreparedStatement:
private synchronized void aggiungiIndicazioneProgetto(String idprogetto, String idrichiesta) {
LOGGER.debug("START");
LOGGER.debug("Creo un oggetto di tipo connessione");
Connection conn = databaseManager.creaConnessioneDataSource(datasource);
LOGGER.debug("Definisco una query sql");
String sql = "INSERT INTO RICHIESTAPROGETTO (IDRICHIESTA,IDPROGETTO) VALUES (?,?)";
LOGGER.debug("Dichiaro un oggetto di tipo preparedstatement");
PreparedStatement stmt = null;
try {
LOGGER.debug("Istanzio l'oggetto statement");
stmt = conn.prepareStatement(sql);
LOGGER.debug("Imposto i segnalibri della query");
stmt.setString(1, idrichiesta);
stmt.setString(2, idprogetto);
LOGGER.debug("Eseguo la query di inserimento del progetto");
stmt.executeUpdate();
} catch (SQLException e) {
LOGGER.error("Eccezione di tipo SQL : " + StringUtils.getCustomStackTrace(e));
finally {
LOGGER.debug("Chiusura di statement e connessione");
databaseManager.chiudi(stmt);
databaseManager.chiudi(conn);
LOGGER.debug("END");
Which may be the cause for the described behavior?
I hope someone help me..My problem is the following.
If I deploy my application with the illustred datasource in my local OC4J (10.1.3 in a Standalone Environment) all work fine.
The application creates a reasonable number of connections (in ORACLE - 10g Enterprise Edition Release 10.2.0.4.0 - db I run the query verification "select count(*) from v$session where username='MYAPPLICATION'"), and overall performance is very good.
If, however, to deploy on the production machine of corporate (always 10.1.3, but obviously in Oracle Application Server Environment) the
number of connections (status 'INACTIVE') grows massively, and this is saturated in a short time.
The exception that at the end from the application is that:
java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:277)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
oracle.jdbc.driver.T4CTTIoauthenticate.receiveOsesskey(T4CTTIoauthenticate.java:243)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:304)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:430)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:218)
oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:114)
oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:77)
oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1361)
oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:441)
oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:336)
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:286)
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:179)
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:159)
oracle.oc4j.sql.DataSourceConnectionPoolDataSource.getPooledConnection(DataSourceConnectionPoolDataSource.java:57)
oracle.oc4j.sql.xa.EmulatedXADataSource.getXAConnection(EmulatedXADataSource.java:92)
oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createXAConnection(ManagedConnectionFactoryImpl.java:211)
oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:170)
com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
also I add the other attributes of Connection Pool of the Datasource:
Connections:
Initial size of Connection Cache = 0
Minimum Number of Connections = 0
Maximum Number of Connections = -1
Connection Retry Interval (seconds) = 1
Maximum Connection Attempts = 3
Maximum Number of Statements Cached = 0
Lower Threshold Limit On Pool (%)= 20
Validate Connection = False
What I can do?
many thanks.. -
A little help please...I have too much equipment and too little knowledge
I live in a brick and concrete 8000 foot apartment so wifi with one router is impossible....I have wired two rooms each at the extreme opposites of the floor....Current set up: asdl modem-->wrt54g-->2 1mwatt amplified wireless routers (in AP mode)
My problems so far:
DHCP, I dont know much about this. The adsl modem has dhcp server setting s (DHCP on, or dchp off or dhcp relay) and I have heard you only need one dchp on in a network. So do I turn on dhcp on the adsl modem or the wrt54g...
On my macbook pro under network diagnostics it takes like 4-5 minutes to establish ISP, Internet green lights, I always have to fiddle with all the settings, extremely frustrating for my wife who has no clue of this...
Many thanks for all you help in advance...jcmiro wrote:
I live in a brick and concrete 8000 foot apartment so wifi with one router is impossible....I have wired two rooms each at the extreme opposites of the floor....Current set up: asdl modem-->wrt54g-->2 1mwatt amplified wireless routers (in AP mode)
My problems so far:
DHCP, I dont know much about this. The adsl modem has dhcp server setting s (DHCP on, or dchp off or dhcp relay) and I have heard you only need one dchp on in a network. So do I turn on dhcp on the adsl modem or the wrt54g...
On my macbook pro under network diagnostics it takes like 4-5 minutes to establish ISP, Internet green lights, I always have to fiddle with all the settings, extremely frustrating for my wife who has no clue of this...
Many thanks for all you help in advance...
Hi
Could i get to know ur ISP ?
and If you are a DSL service User , u might be getting a DHCP Ip range of - 192.168.1.xx from DSL modem/router itself.
Just tweak the Router LAN ip to - 192.168.7.xx , and release / renew the Ip address .
Let us Know whts the status !
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com -
When making a movie with iMovie from Photos, some of them seems to move when watching on screen or TV.
It seems to be a brillance problem but I tried to make the light or the blank lower without result.Hello
The movement you see on photos in iMovie is most likely the Ken Burns motion effect, which you can modify or turn off.
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov4184794f.html -
Hi. I just bought a Powerbook 3500 with a 250MHz processor, a 7Gig Hard drive, a 20X cd drive, an AC adapter, a bookendz docking station, and 64MB of ram for $26.00 + $20.00 shipping. Did I pay to much for this machine?
Also, I have a few questions.
the battery is dead, where can i get a new one for cheap?
does it have an ethernet port, or just 56k?
and what kind of ram does it use? i cant settle for 64MB.You did not pay too much, you got too much. At least 100 too much. You specified 3500. Do you mean you got a PowerBook 3400? The specs for that model are here:
112393- Macintosh PowerBook 3400c/180: Technical Specifications
The 10BaseT Ethernet port is listed as optional on the /180 model, standard on the rest.
You can't get a new battery for cheap. Any battery made by Apple is now quite old. You may be able to get a serviceable used battery for cheap. You will have to shop hard for aftermarket RAM and batteries.
RAM is available here (battery, too):
Data Memory Systems 3400/180 -
Don't know if this fits here but...
Suddenly, my Powerbook's LCD display has changed and shows so much contrast that I cant see grays and there is too much whites. I cant correct this with the brightness control or the "Calibration: in Displays. Tried restarting several times, but looks same. Is this a hardware or software problem? Any suggestions welcome...Plot thickens...in an effort to fix the contrast problem, we replaced the 256MB RAM module with a 512MB module. It froze on boot twice, then successfully booted but only showed a 256MB module. We exchanged the memory for new memory, and this time it always froze or kernel paniced during boot.
I returned the original 256MB RAM module, and we are at least back to where we were -- system works, but too much contrast.
I bought PC133 RAM as described on Apple's site. Hm. Time to write off this old iBook?
Kevin -
I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
RegardsI'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad -
My Macbook pro Mid 2012 Model Seems to be using too much RAM
Hello everybody, I recenlty bought a Macbook pro Mid 2012 Model and I absolutely fell in love with it! I use it everyday for school, work, and for my musical hobby.
I haven't had a single problem with it until recently, and it seems like the RAM memory is being all used up without me even running programs. This problem barely started rougly 2-3 weeks ago and it's becoming annoying. I do plan to upgrade the ram soon seeing as the extra RAM will help run my engineering software I'm going to be using.
Anywho I'm just looking for tips, suggestions or answers as to why this problem is occuring. Also heard from a fellow employee that Google Chrome can cause this problem with RAM and battery life as well.Stop using Chrome for any number of reasons and stick to Safari. An aspect of OS X memory management is to take over as much memory as possible in order to better manage the memory, however, this does not mean you are running out of memory. You only run out of memory when you try to run too many applications concurrently given the amount of RAM you have. You will know when that happens because the computer will slow down, you will see the beachball a lot, everything you do takes forever, and the hard drive will be grinding away.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
OS X Mavericks- About Activity Monitor
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs. -
Kernel_task is spending too much CPU and Ram
I have Macbook Pro 13' mid 2012 I bought it 9/2013 and its started to become too slow like seriously slowed when I check the Activity Monitor kernel_task spend too much RAM and CPU and because of the usage of CPU my computer becomes overheated. This what comes up when I do the EtreCheck;
EtreCheck version: 1.9.15 (52)
Report generated 5 Sep 2014 18:00:42 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:36:17
Disk Information: ?
APPLE HDD HTS547550A9E384 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 499,25 GB (321,73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Logitech USB Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Startup Items: ?
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.skype.skypeinstaller.plist Support
[loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
Searchme-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
3rd Party Preference Panes: ?
Fan Control Support
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
22% Skype
10% WindowServer
7% coreaudiod
4% Google Chrome
3% sysmond
Top Processes by Memory: ?
181 MB Skype
84 MB Google Chrome
61 MB mds_stores
57 MB systemstats
57 MB WindowServer
Virtual Memory Information: ?
1.48 GB Free RAM
1.51 GB Active RAM
392 MB Inactive RAM
637 MB Wired RAM
561 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card. The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit. I would describe my use as "light" based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted 3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble. Does that make sense? Not to me....but it is clear to all my level of knowledge. Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.
The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM -
After Effects Ram Preview Drops Frames , Using Strangely Too Much Ram
System Specs :
CPU : Core i7 4770k
Memory : 16 GB DDRIII
Graphic Card : GTX 770 4GB RAM
Storage : 256 GB SSD + 2 TB HDD
OS : Windows 7 SP1
Using After Effects CC 12.2.1.5
NOTE : NOT ANY ADDITIONAL HARDWARE IS ATTACHED TO MY PC . NO SOUND RELATED EQUIPMENT NOR CAPTURE CARD NOR ANY THING ELSE
Hi there
As you Already Don't know I'm an After effects Specialist Using it for quite long time . There is an Ancient Problem with CS6 CC versions . I have a short Small size 1080p Video , about 8 MB , I drag it into project panel and then put it into timeline hence it creates a sequence . There are no Effects and nothing added to timeline , just a small simple video . The Strange Problem is when I click "0" for ram preview , The video starts playing and the green bar above timeline starts to fill . When Ram preview Finishes and plays the video from beginning I See there are several frames Between which are not being loaded to Ram ! The video plays RGB color bar instead of main video and when I check the Green bar above Timeline I see that those frames are being dropped and there is no Green bar above them !
I have had this problem several times before but this time it is too important and the problem should be solved . What is obvious is that some frames are not being rendered or are being deleted after render !
Another Strange problem is that when I open Task manager , It shows AE uses around 10 GB ! of RAM when I press "0" for Ram previewing this video !
So there is a Logical explanation here , Somehow when I do ram preview this video it uses extra ordinary too much ram so AE is unable to load the full video (8 MB) into Ram and hence deletes some of frames .
most of my videos have not this problem and use acceptable amount of ram .I've had this issue with some of my videos till now .
Listen carefully : "This has nothing to do with AE preferences or low memory or plugins . because there is nothing wrong with any individual components of may hardware or software . I have far more than enough RAM for a 8MB video . My Memory has no hardware or software problem . I tested them and if there was any problem with memory or other hardware that should have affected other applications . I have the most recent AE version . I have the most Recent windows updates and drivers . I have a Clean virus free system , and as a computer engineer this strange AE problem is rarely caused by viruses , trust me . I have not any hardware instead of ones a normal PC has . I have not any problem with my whole entire system configuration because I have benchmarked my PC with several up to date softwares . I have tested my PC with almost any STRESS TESTING solutions available for really long period of time , 3 days by IDA64 . Not any driver conflict , dll missing , registry problem have been discovered , as I know perfectly how to solve them ."
I asked some of my friend whom are expert in AE . I handed them my videos and Watched ALL OF THEM HAD THE SAME ISSUE ! So the problem isn't related to my Local PC . What i believe is that there is some malfunctioning or miss coded part in AE source code that decides to reserve such a huge strange amount of ram for such a tiny 8MB video . The point is that the AE works fine , no crash or any problem report . So the AE it Self decides to allocate such huge amount of ram and thinks it is correct ! So I think this is a work around that AE developers in adobe are using to bypass a problem or conflict ! by Using more amount of RAM . I think that there might be some miss understanding between the AE and my installed codec . I installed MEGA CODEC PACK on my PC to enable some new codec supports , and so are some of Windows default de/encoders changed to new ones . I think there shouldn't be any problem But there is something wrong between AE and de/encoder modules !
Please any one with any suggestion , I really appreciate your advices .###UPDATED###
Well thank you guys for your patience ...
as you considered I forgot to mention the codec itself and other stuff ...
The video is in 1080p , 35 sec long , it is a green screen shot , this video is directly downloaded from YouTube and plays perfectly on all tested PCs . here are detailed info :
Format : MPEG-4
Format profile : Base Media
File size : 8.55 MiB
Duration : 34s 993ms
Overall bit rate mode : Variable
Overall bit rate : 2 050 Kbps
VideoFormat : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Bit rate : 1 927 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Frame rate mode : Constant
Frame rate : 30.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
NOTICE : This video is just for testing the lighting and etc , and so the Sampling and other specs are not considered for broadcast .
I think you hit the point ! Thats K-lite codec pack installed on every machine which the video is tested on ! The point is whats wrong with it ?! I have had never ever any problem with this codec pack !!!
The deadly question : So what are the alternative ways to work with codecs that AE doesn't support ?! because installing codec looks simple and sufficient ! -
2GB RAM too much for 1Ghz Powerbook?
Hi
In order to speed up my G4 17" 1 Ghz Powerbook, especially for Photoshop Elements, I upgraded to 2GB RAM. The Crucial Memory Scanner said that was the max allowable (although I ended up buying Samsung memory from an eBay dealer). My computer seems to be actually working slower now, though it is basically working ok. On looking at the tech spec for my Powerbook from Apple Support I then found this: "two SO-DIMM slots support up to 1GB".
Have I put in too much RAM now (who is right about my memory capacity - Apple or Crucial?), or does it make a difference that I bought cheaper RAM than Crucial or Kingston for example? (Presumably if the RAM was suspect I'd have bigger problems?)
Excuse the scattergun questions - I'm just trying to work out if I'd be better off reinstalling my original pair of 512MB modules, or leave in the 2GB and look at other issues in my computer for improving speed.
Many thanks.To add to eww's excellent advice, there is a note on my RAM vendor's website page for your PowerBook stating that the 17" G4 1G PowerBook is one of four PowerBooks that uses "bus slewing" and have special RAM requirements.
I recall a couple of years ago there was a little...well, call it a "public disagreement" for lack of a cruder term....among RAM vendors over bus slewing and the right RAM. Crucial was accused in these forums and by other companies of failing to recognize the requirements bus slewing placed on the RAM. However, this seems to have settled down as I see posts here stating more recent Crucual RAM worked. You could call Crucial and ask if the part number you bought supports bus slewing. I'm sure they will make certain you get the correct type from them.
Oops, nearly forgot! Bus slewing is explained in this Apple Technical paper on the 15" 1 G PowerBook. Scroll down about a half page to the section "Processor and Bus Slewing."
Maybe you are looking for
-
Envio de Trem de Pulsos pela porta SERIAL
Olá pessoal. Eu preciso enviar trem de pulsos de frequencia de 1Hz com tempo em nível alto de 5us (micro segundos) durante uns 30 minutos pelo pino 3 da porta serial ( Tx ). Ja montei o circuito de conversao de RS232 para TTL. E no programa ja fiz
-
How do I find the voice memo file stored in the backup on my computer?
I am trying to find the file on my computer for the voice memos. I tried to save the voice memo and it was deleted from my iphone 5. I am trying to retrieve it from a previous backup on my computer.
-
How to find the number of transactions recorded in R/3
Hi guys, I wanted to know the number of all the transactions recorded in R/3 in a time period. Points for helping. Thanks
-
The offset in the file is too big"? Other than, hey it's FAT formatted, etcetera!
Does anyone have an answer for "The offset in the file is too big" error while creating a file using QT API "writeToFile"? I mean something other it's FAT formatted, not enough space, et cetera. Anyone?
-
Deleting Photo Files in Lightroom 4
I use Aperture 3 and am thinking of switching to Lightroom 4. I do not store my photos in the Aperture 3 library. Instead I store my photos in my own folder system on an external hard drive and I reference the files in Aperture. This works well for