Too much magic

In order to make my Magic Mouse functional at all with Adobe InDesign CS4, I have had to switch off scrolling. The darn thing is just too sensitive to my fingers being within a quarter of an inch of the surface and InDesign just flies to some other part of the document I'm working on with monotonous regularity.
There don't seem to be any controls for this kind of sensitivity. It's not that I want slower scrolling, I don't want it to scroll at all unless I tell it to with a deliberate gesture.
Am I alone in this?

I know it seems a little too sensitive... maybe something that could be adjusted in a future firmware update.
But I have learned to adjust for it by holding the mouse by the sides with thumb and ring finger. Learn to keep index finger and pointer finger raised until you want to take an action. In some applications, one cannot rest your hand on the mouse as often as you may have been accustomed to doing depending upon the particular activity you are doing.

Similar Messages

  • Paying too much?

    Does anyone else feel like they are paying too much? I have been with Verizon for 3 years now and my bill for 5 people is about $300 a month. I called to see if I could get any sort of lower rate for being a customer for so long and I was given the option to remove a GB of data from my plan to help lower my cost. I was also offered a promotional GB. Magically, when having my GB removed, I went over my data and was forced to buy the GB back. Verizon has no idea as to why the data was so high. I have been looking at less expensive options. I have let Verizon know that, but they basically said go ahead. Verizon has very poor customer service. In my opinion they do not care about their customers, only the money in our wallet. As soon as my phone lines are FREE from the contract, I plan to leave Verizon. They are far too expensive and don't provide for their customers. I even have a 17% discount on my bill through my work, but conveniently, it only applies to a small charge that has no purpose. If you are considering Verizon don't, you are better off somewhere else!!

    flaker22 wrote:
    I even have a 17% discount on my bill through my work, but conveniently, it only applies to a small charge that has no purpose.
    I would be curious what that "small charge that has no purpose" happens to be.
    Are you on the More Everything plan? If so, that "small charge that has no purpose" is for your data. If the data on your plan "has no purpose" simply change your data allowance to the lowest possible amount and it WILL save you money.
    If you THEN go over your data allowance, that charge DOES have a purpose then. If you use the data, then the charge DOES have a purpose.

  • App stops working when given too much xml

    I have an AS3 application I built for a client about a year
    ago. The application loads a dynamic page of xml data and then
    builds the screen using that data. He has used the application
    happily for a year and recently complained that it stopped working
    and asked me to debug. It turns out the number of items in my
    client's database have exceeded 1200 items and at ROUGHLY that
    magic number the screen fails to build (I determined this through
    trial and error by trimming down the data page). There is nothing
    in my code that alludes to any limit. I don't believe this is a
    problem of the xml data CFM taking too long to pull from the
    database (for debug purposes I have hardcoded that data page to
    eliminate a slow database issue). My IOErrorEvent.IO_ERROR function
    is never called, so the app seems to be under the impression it is
    reading the XML completely. The BuildScreen() function simply loops
    through the .length of the xml, so there are no limits there I have
    purposely imposed. The application definitely stops at this magic
    number of 1200 (give or take 5-10 items). There are no errors in
    the xml data itself. At this magic number of 1200 if I refresh the
    page over and over it works sometimes and fails others. If I add 20
    more items to the list it never loads. If I delete 20 items it
    always works. I'm going to put the code in its entirety below. I
    would SO MUCH appreciate if someone can help me understand what is
    going on. Thankyou.

    I quickly threw this code together to try to describe
    by problem. I didn't think it was prudent to post all
    the code in my web app. (servlet happens to be the
    context path, and I just threw the tag in to duplicate
    the problem I'm having).Prudence is your call, but nobody will be able to help unless they can see what the problem is.
    It's a difficult call, because posting too much will scare people off, too. (I know I don't want to read your entire app.)
    The log doesn't really help.Neither does this post.
    Needless to say, you've got a deployment problem. Tomcat 5.0 works; so does the JSTL 1.1 tag library. You're doing something wrong.
    If you've never used JSTL before, I'd recommend that you read something serious, like Hans Bergsten's O'Reilly book on JSPs. He writes it entirely in terms of JSTL, because that's what people should use from now on. I think his 3rd edition even has the JSTL 1.1 tag library.

  • Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

    I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

    Good catch. That almost certainly is an invitation to download malware.
    There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/

  • Sites Taking too much time to open and shows error

    hi, 
    i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
    does not open any page or central admin site and shows following error
    event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error. 

    This usually happens if you are low on hardware requirements.  Check whether your machine confirms with the required software and hardware requirements.
    https://technet.microsoft.com/en-us/library/cc262485.aspx
    http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
    Please remember to up-vote or mark the reply as answer if you find it helpful.

  • Error message (Because a USB device was drawing too much power)

    Hi Everyone,
    Bought recently a new macbook pro 13 inch with Retina display with 120 GB flash drive.
    Connected a non-apple CD drive to my macbook and after that started receiving this message: "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    initially I was receiving this message after I switch on my macbook but now after every 30 seconds this message pops up although I never connected anything to my macbook through its USB ports.
    Will highly appreciate for your help on how to get rid of this problem.
    Regards
    Homayun

    Try resetting the SMC
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Can too much memory lead to a kernel panic on a MacBook Pro? specs 2.4GHz intel core i7 16GB DDR3 RAM   late2011..My laptop began suffering from kernel panics 3 mos ago first noticed using public wifi. Gone thru apple support all the way to engineers

    Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night  attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card.  The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit.  I would describe my use as "light"  based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support  and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted  3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix  graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue  given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble.  Does that make sense?  Not to me....but it is clear to all my level of knowledge.  Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.

    The RAM needs specs as shown below.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

    I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    I don't have anything else plugged into my MBP, so I am confused as to what's going on.  This problem has never happened before.  MBP is less than a year old - about 9 months old.  HELP

    Get a powered USB hub.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

    Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
    I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

    If you paid for what you used then it was not a trial.
    Look thru the following links and use the chat option if required for your situation:
    Cancel your membership or subscription | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    https://forums.adobe.com/thread/1703848
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • White MacBook takes too much time to boot up

    Hi there.
    I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
    I'm not sure but seems like that detecting the hardwares take too much time .
    any solution?
    PS: I'm running Snow Leopard(10.6.2)

    macbig wrote:
    OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
    Repair Permissions - http://support.apple.com/kb/HT1452
    Run Disk Utility >applications>utilities>disk utilities>verify disk
    How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
    Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
    by the way thank you .

  • N73 ME Battery HEATING TOO MUCH - Please Help

    N73 ME Battery HEATING TOO MUCH - Please Help
    Hi Friends,
    I am from India
    Need Help/Suggestion from Mobile Gurus right here
    I have 1 Year Old N73 ME and I mainly use it for Calling and Texting. Very Occasionally I use it for Music/Gaming and Browsing the Web.
    The phone is completely in excellent condition
    The problem is that: While charging ONLY the Battery gets too much HOT and it never shows Battery is Full (Charged it for Max 1 Hour 45 Minutes)
    This problem suddenly appeared, so I formatted the Memory Card as well as Hard Format/Reset the Phone, but still the Battery is heating too much
    After disconnecting the Phone from Charger, the Battery is FULL and I can use it without any problem and as usual. The Talktime right now is around 2.5 Hours and Standby time is around 2-3 Days
    Please tell me what to do
    If you want any additional details I will post here
    Thanks a Lot and With Best Wishes

    Hello Sir,
    Thanks for your response
    I would like to add that the Temperature here in my city is around 43 Degree Centigrade (yes! centigrade, I am from Middle state's of India) everyday. Is this problem is due to so much heat?
    Thanks again

  • SCRIPT5007: Unable to get property 'top' of undefined or null and too much recursion

    I am not sure about placing two questions into one post, but here it goes:
    The error above  "SCRIPT5007: Unable to get property 'top' of undefined or null" is coming from this function:
    Code: 
    $(function () { //this is the way to run your code at the DOM Ready event  $('a').click(function () { $('html, body').animate({ scrollTop: $($(this).attr('href')).offset().top }, 1500); return false; });  });
    This is the effected code I believe that is causing the problem:
    Code: 
    scrollTop: $($(this).attr('href')).offset().top
    the error occurs when I click on a "clear" button in my form. My website is one long page and that function allows my navigation to slide up and down the site. Without it, everytime you click a nav, it jumps to that anchor.
    For the 2nd problem, the too much recursion, the problem lies within here:
    Code: 
    function () { if ($.isReady) return; imReady = true; $.each($.includeStates, function (url, state) { if (!state) return imReady = false }); if (imReady) { $.readyOld.apply($, arguments) } else { setTimeout(arguments.callee, 10) } }
    where the error is actually coming from the 2nd "function" script. This is part of the browser compatibility script for mozilla/opera at the top of the index page. Any help would be great. Thanks.

    Ahh I apologize. I simply was posting to JavaScript forums in hopes of
    finding a solution. Sorry for the mixup.

  • HT4106 How do I use a midi keyboard on GarageBand with my iPad? When I try it says the device cannot be used as it requires too much power.  However, I have given the midi it's own power source.

    How do I use a midi keyboard as an input device on garageband? Its an oxygen 61 board.  I'm using an iPad camera connection kit and a separate power source for the midi but each time it says it cannot use the midi as it requires too much power. 

    I have the same problem with my iPad and 61. Sometimes it says device not supported and sometimes it rants about power - any solutions anyone ?

  • Not getting all my music from iTunes I might have too much stored like ebooks how do I delete

    I have a iPod touch but have noticed I am not getting new music I purchased from iTunes onto my touch. Not sure if I have too much other things like books etc using storage, how can I correct this

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod

  • MacBook pro 13" mid 2010 "USB drawing too much power" HELP

    Hi, my MacBook Pro keeps coming up with a window about 30 after start up saying "USB drawing too much power" and none if the USB ports work neither does the iSight camera (green light is constantly on) and the headphone jack won't work! I have tried re installing OSX but it hasn't worked! Apart from an SMC reset and a PRAM what else can I try? Absolutely nothing is plugged in not a single cable or keyboard or mouse just my MacBook on its own, is it definitely a software problem or am I going to have to get apple to repair the hardware because I do not have that much money to replace a logic board and get apple to replace it themselves. Thanks in advance!

    I hope it works for you ...

Maybe you are looking for