Too much security

Have four computers I maintain, all running 10.4.9. There seems to be too much security on a couple of them (I guess actually within the user account), but I can’t put my finger on the specific thing that’s causing this issue. Example – when a file is transferred to my computer (which is an OK one), either through file sharing, off of our server or e-mail, I can open it, alter it, save it, etc., without any problem. On the ones with the “issue,” these files cannot be used without going into Ownership and Permissions (through “Get Info”) and changing the accessibility to the user. Sometimes the files will open without going through this, but they ask for the user’s password first (and saving an altered file is still an issue). It seems like things put directly on the desktop are sometimes even more secured than when put in other places.
I have gone through the whole computer on one of these two and tried to give the user full accessibility to everything (through “Get Info”), and have run permissions repair numerous times (which actually changes some things back). This is one of the newer computers, and this user is even the first and only user ever set up on it. I’ve also checked to make sure Norton AntiVirus is set up with no more restrictions than my settings.
I’m beginning to think this “extra” security issue might also be creating problems in our (ug) Lotus Notes program for these two users. One other computer/user is fine, as I am.
Any ideas anyone? I don’t know what setting(s) I need to look for – or where, to “free up” these security issues on these two computers.
Thanks,
Ginny

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

HT3662 What about TOO MUCH SECURITY???

What about TOO MUCH SECURITY??? I always played the SET puzzle in the New York times, which required the Java plug in. No problem, until I installed Mountain Lion, which I am beginning to REGRET. After installing the new OS, the NYT game page required that I install the newest version of Java. Now I'm completely frozen up when I try to play my puzzle. Just the stupid Java icon, with the squares circling endlessly around the coffee cup. It went on for an hour, and I finally gave up. I have to restart everything before I can use the browser again. Any suggestions??

Is playing that game worth the extreme security risk of having Java enabled in your web browser? Are you aware that Java is currently vulnerable, allowing a web site to install malware on your machine without any user interaction required? Further, that has been the case for 25 days (this time), with no fix available yet. And that's just the latest incident... Java has been involved in getting the majority of Mac malware installed over the last year.
For more information, see:
Java is vulnerable… Again?!
http://www.thesafemac.com/tag/java/

Too much security in Mountain Lion

I only switched to Mountain Lion last week. It seems that every time I do anything I get a pop up asking for my password. I am the only person who can access my Mac, so is there a way I can switch all this security off, or some of it.
Examples:
I start up Safari and I am asked if Safari can access my keychain.
I am frequently asked for my admin password to unlock things, for example to start up Carbon Copy Cloner.
There are too many other instances to mention, and I am tired of always being interrupted to give my password when it is TOTALLY unnecessary!!
Thanks Apple people, but can you let me know how to switch this "security" off?

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT5704 Too much security

If apple keep locking down their devices no body will buy their products...

Most everyone provides security updates and bug fixes - was there a question in there somewhere?
You can provide feedback to Apple at https://www.apple.com/feedback/

Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/

Too much Time until logon window after applying Security Configuration Wizard on DC

Hi,
The scenario is the following:
Domain Controller on Windows 2012 R2
DHCP installed on Domain Controller
Clients: Win7, Win8
Servers: Win2008/R2, Win2012 R2
After applying a SCW template on a DC, the logon window takes too much time to appear (after reboot, lock or sign out).
The seetings in the template are the following:
Select Server Roles: All of the default options selected by SCW
Select Client Features: All of the default options selected by SCW
Select Administration and Other Options: All of the default options selected by SCW
Select Additional Services: All of the default options selected by SCW
Handling Unspecified Services: Do not change the startup mode of the service
Network Security Roles: All of the default options selected by SCW
Require SMB Security Features: 2 checkboxes marked
Require LDAP Signing: the checkbox marked
Outbound Authentication Methods: Domain Accounts
Outbound Authentication using Domain Accounts: 2 checkboxes marked
Inbound Authentication Methods: none of the checkboxes marked
System Audit Policy: Audit successful activities
The question is:
What options(s) include/exclude from SCW template that avoid too much time logon windows takes to appear?
Thanks in advance!

Hi,
Based on my research, SCW helps administrators to ensure that only those services, application capabilities, and ports required for the roles to function are available; anything not specifically needed by the roles the server holds will be disabled. These
tasks above all consume time to implement, which causes the delay for the Windows logon screen to display.
Therefore, as the way I see it, it is a normal behavior, and I didn’t find any option which could avoid/reduce time spent on applying settings within the SCW template.
More information for you:
The Security Configuration Wizard
https://technet.microsoft.com/en-us/magazine/2007.04.securitywatch.aspx
Security Configuration Wizard
https://technet.microsoft.com/en-us/library/cc754997.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

BPC application is taking too much time to load

Hi experts!
I'm facing a very weird problem...
We've developed a BPC application (app name: USM).
This application is taking too much time to be loaded in some computers (around 8 minutes to load). Yes, in SOME computers.
There is around 100.000 registers in the database and most coming from material master data.
If I try to load this USM application in another computer, the process loads smoothly. The computer's hardware is all the same, the server is hyper estimated and everyone is in the same network.
I talked to infrastructure departament and we made several tests. We run BPC on the server (loaded quickly), on several computers (some loads quickly, others don't), used wireless and cable connection (got all the same result) and checked communication between BW and BPC but it is ok.
After all, I tried to load APSHEL application in the same enviroment and it loaded intantly. So, I guess it is something wrong with my application. But if was this, I suppose it should happen to all computers and not only with part of them.
Have anybody ever seen something like this?
Thank you in advance.
Rubens
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:43 PM
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:46 PM

Hi Rubens,
I would try making a couple of test:
1. I will install the client in a machine that is located in the same network segment, or try using a vpn that comunicates with the server bypassing all security devices, only to see if the network it's the problem.
2. Making a full optimize of one application to see if maybe the problem it's related to the segmentation of the cubes (i don't think that this is the problem but give it a try).
It is very wierd that in some computers happends and in others don't... also try to clean up the local cache of the applications in those computers that are giving to you bad performce and retry.
hope it helps,

My late 2009 iMac is running slow, particularly on Mail, more so since I upgraded to Yosemite. I have run an Etrecheck but it doesn't mean too much to me. If anyone can point me to what I need to do I'll be very grateful.

My late 2009 iMac is running slow, particularly on Mail, more so since I upgraded to Yosemite. I have run an Etrecheck but it doesn't mean too much to me. If anyone can point me to what I need to do I'll be very grateful.
Etrecheck says:
Problem description:
Imac late 2009 running slow
EtreCheck version: 2.2 (132)
Report generated 5/3/15, 4:33 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (21.5-inch, Late 2009) (Technical Specifications)
    iMac - model: iMac10,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            Empty
        BANK 1/DIMM0
            Empty
        BANK 0/DIMM1
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM1
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400 - VRAM: 256 MB
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 5:5:56
Disk Information: ℹ️
    ST3500418ASQ disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (308.35 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GA11N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Western Digital My Book 111A 1 TB
        disk1s1 (disk1s1) <not mounted> : 32 KB
        My Book (disk1s3) /Volumes/My Book : 1.00 TB (226.58 GB free)
    Apple Internal Memory Card Reader
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/hosts - Count: 30
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Toast 10 Titanium/Toast Titanium.app
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
    [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
        /Library/Application Support/LogMeIn/drivers
    [loaded]    com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) [Click for support]
    [not loaded]    com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) [Click for support]
    [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) [Click for support]
    [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) [Click for support]
    [not loaded]    com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) [Click for support]
    [not loaded]    com.novatelwireless.driver.3G (3.0.13) [Click for support]
    [not loaded]    com.novatelwireless.driver.DisableAutoInstall (3.0.13) [Click for support]
    [not loaded]    com.option.driver.Option72 (2.15.0) [Click for support]
    [not loaded]    com.option.driver.OptionHS (3.26.0) [Click for support]
    [not loaded]    com.option.driver.OptionMSD (1.21.0) [Click for support]
    [not loaded]    com.option.driver.OptionQC (1.11.0) [Click for support]
    [not loaded]    com.pctools.iantivirus.kfs (1.0.1) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) [Click for support]
    [not loaded]    com.vodafone.driver (3.0.9) [Click for support]
    [not loaded]    com.zte.driver.cdc_ecm_qmi (1.0.1) [Click for support]
    [not loaded]    com.zte.driver.cdc_usb_bus (1.0.1) [Click for support]
    [not loaded]    de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) [Click for support]
    [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) [Click for support]
        /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
    [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) [Click for support]
        /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
    [not loaded]    com.novatelwireless.driver.3GData (3.0.13) [Click for support]
        /System/Library/Extensions/Vodafone.kext/Contents/Plugins
    [not loaded]    com.vodafone.driver.Data (3.0.9) [Click for support]
        /Volumes/My Book/Extras/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.9) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.11) [Click for support]
Startup Items: ℹ️
    AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
    Qmaster: Path: /Library/StartupItems/Qmaster
    VirtualPCOSServices: Path: /Library/StartupItems/VirtualPCOSServices
    Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cloudphotosd.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.EscrowSecurityAlert.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.photolibraryd.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    10 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [failed]    com.apple.mtrecorder.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.softwareupdated.plist
    [killed]    com.apple.wdhelper.plist
    8 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [failed]    com.logmein.LMILaunchAgentFixer.plist [Click for support] [Click for details]
    [running]    com.logmein.logmeingui.plist [Click for support]
    [running]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    [running]    de.novamedia.VodafoneDeviceObserver.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.adobe.versioncueCS3.plist [Click for support]
    [loaded]    com.adobe.versioncueCS4.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [loaded]    com.bombich.ccc.plist [Click for support]
    [running]    com.logmein.logmeinserver.plist [Click for support]
    [loaded]    com.logmein.raupdate.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Mail    Application (/Applications/Mail.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    iAntiVirus    Application Hidden (/Applications/iAntiVirus/iAntiVirus.app)
Internet Plug-ins: ℹ️
    LogMeInSafari64: Version: 1.0.730 [Click for support]
    Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.730 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.730 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
    EPPEX Plugin: Version: 10.0 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Adobe Version Cue CS3 [Click for support]
    Adobe Version Cue CS4 [Click for support]
    Déjà Vu [Click for support]
    Flash Player [Click for support]
    Growl [Click for support]
    SixtyFourSwitcher [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 190.89 GB
    Destinations:
        My Book [Local]
        Total size: 1.00 TB
        Total number of backups: 13
        Oldest backup: 2015-04-21 19:59:59 +0000
        Last backup: 2015-05-02 19:49:37 +0000
        Size of backup disk: Adequate
            Backup size 1.00 TB > (Disk used 190.89 GB X 3)
Top Processes by CPU: ℹ️
        12%    iavd
         5%    iAntiVirus
         5%    WindowServer
         5%    diskimages-helper
         1%    mdworker(5)
Top Processes by Memory: ℹ️
    537 MB    kernel_task
    266 MB    Google Chrome Helper(4)
    111 MB    Google Chrome
    74 MB    ocspd
    74 MB    WindowServer
Virtual Memory Information: ℹ️
    1.45 GB    Free RAM
    2.55 GB    Used RAM
    59 MB    Swap Used
Diagnostics Information: ℹ️
    May 3, 2015, 11:26:23 AM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-05-03-112623_[ redacted].cpu_resource.diag [Click for details]
    May 3, 2015, 11:22:17 AM    Self test - passed

Thanks for all the replies.
I've now installed the ad blocker, thrown away the unwanted files, and thrown away a copy of Firefox that Adware said had a problematic extension.
Things are better, but still slow.
Activity Monitor shows that with just Mail, Chrome and Excel running, 2.9GB of my 4GB RAM is used. Opening InDesign (always slow) increase that to 3.2GB. But the graph stays green.
Console shows several potential problems but I don't know if any are significant. In any case I will call my Mac store tomorrow to ask their advice about RAM.
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3383189 oid:3383189 ino:3383189 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5 -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3375445 oid:3375445 ino:3375445 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages
04/05/2015 18:52:10.564 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:11.090 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:12.727 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:52:13.021 Mail[309]: XOAUTH2 requires user
04/05/2015 18:52:13.022 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:52:14.284 helpd[296]: Cannot find executable for CFBundle 0x7fb412caabe0 </Library/Documentation/Help/iWorkFunctionsHelp.help> (not loaded)
04/05/2015 18:52:15.085 helpd[296]: Cannot find executable for CFBundle 0x7fb412d1f540 </Library/Documentation/Help/X422MFPHelp.help> (not loaded)
04/05/2015 18:52:17.455 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:17.456 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.737 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.738 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:23.292 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:31.811 AddressBookManager[428]: Validate metadata timed out, cancelling
04/05/2015 18:52:33.395 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.396 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.467 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:33.573 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.574 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.922 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.923 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.068 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:34.068 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.354 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:35.161 icbaccountsd[430]: Connection error while checking Apple Internalness. Error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CrashReporterSupportHelper was invalidated.) UserInfo=0x7fe8584355d0 {NSDebugDescription=The connection to service named com.apple.CrashReporterSupportHelper was invalidated.}
04/05/2015 18:52:35.597 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.598 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.612 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:35.613 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3111641 oid:3111641 ino:3111641 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3078032 oid:3078032 ino:3078032 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected] -- /Users/leopard/Library/Mail/V2/[email protected]
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3096791 oid:3096791 ino:3096791 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox -- /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3112877 oid:3112877 ino:3112877 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3105498 oid:3105498 ino:3105498 fsEvents:1 /Users/leopard/Library/Mail/V2/Mailboxes -- /Users/leopard/Library/Mail/V2/Mailboxes
04/05/2015 18:52:39.465 sandboxd[328]: ([430]) icbaccountsd(430) deny mach-lookup com.apple.CrashReporterSupportHelper
04/05/2015 18:52:42.205 com.apple.backupd[433]: Starting automatic backup
04/05/2015 18:52:43.308 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:50.022 com.apple.backupd[433]: Backing up to /dev/disk1s3: /Volumes/My Book/Backups.backupdb
04/05/2015 18:53:40.588 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: server returned error: 404 for URL http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3
04/05/2015 18:53:40.589 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: Failed to load announcements document: Error Domain=GEOErrorDomain Code=-601 "The operation couldn’t be completed. (GEOErrorDomain error -601.)" UserInfo=0x7fba42c4deb0 {NSErrorFailingURLStringKey=http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3, HTTP Status Code=404}
04/05/2015 18:53:40.989 com.apple.xpc.launchd[1]: (com.apple.quicklook[440]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:53:41.159 nbagent[439]: XPC Activity invoked with state=0
04/05/2015 18:53:41.160 nbagent[439]: XPC Activity invoked with state=2
04/05/2015 18:53:41.329 storeaccountd[317]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff9a8580770> connection from pid 439 with interface <AccountServiceInterface: 0x7ff9a8598880> (PID 439)
04/05/2015 18:53:41.739 periodic-wrapper[441]: Running daily periodic task.
04/05/2015 18:53:43.613 storeaccountd[317]: ADI: {
    "Accept-Ranges" = bytes;
    "Cache-Control" = "max-age=14400";
    Connection = "Keep-Alive";
    "Content-Encoding" = gzip;
    "Content-Language" = "en-us";
    "Content-Length" = 793;
    "Content-Type" = "application/x-apple-plist";
    Date = "Mon, 04 May 2015 17:53:43 GMT";
    Etag = "\"e20-5071070ddab80\"";
    Expires = "Mon, 04 May 2015 21:53:43 GMT";
    "Keep-Alive" = "timeout=15, max=281";
    "Last-Modified" = "Tue, 04 Nov 2014 23:01:18 GMT";
    Server = Apache;
04/05/2015 18:53:44.006 sandboxd[328]: ([447]) nbstated(447) deny ipc-posix-shm-read-data com.apple.AppleDatabaseChanged
04/05/2015 18:53:58.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
04/05/2015 18:53:58.472 mdworker[366]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.474 mdworker[435]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[436]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[437]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.478 CoreServicesUIAgent[359]: unexpected message <OS_xpc_error: <error: 0x7fff76be0c60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff76be0f70> { length = 18, contents = "Connection invalid" }
}>
04/05/2015 18:53:58.478 mdworker[438]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.558 fseventsd[42]: Logging disabled completely for device:1: /Volumes/Recovery HD
04/05/2015 18:53:58.565 mds[55]: (Volume.Normal:2464) volume:0x7f96c413b000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
04/05/2015 18:53:58.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
04/05/2015 18:56:38.724 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:39.031 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:39.031 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:40.704 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:40.977 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:40.977 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:43.160 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:43.428 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:43.428 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:00.920 WindowServer[154]: CGXDisplayDidWakeNotification [729933074334]: posting kCGSDisplayDidWake
04/05/2015 18:57:00.920 WindowServer[154]: handle_will_sleep_auth_and_shield_windows: Deferring.
04/05/2015 18:57:01.086 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: notification observer: com.apple.iChat   notification: __CFNotification 0x7fd522414040 {name = _NSDoNotDisturbDisabledNotification}
04/05/2015 18:57:01.235 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>:    NC Disabled: NO
04/05/2015 18:57:01.241 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>:   DND Enabled: NO
04/05/2015 18:57:01.242 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: Updating enabled: YES   (Topics: (
04/05/2015 18:57:06.630 com.apple.backupd[433]: Will copy (547 KB) from Macintosh HD
04/05/2015 18:57:06.720 com.apple.backupd[433]: Found 14392 files (112.99 GB) needing backup
04/05/2015 18:57:06.728 com.apple.backupd[433]: 136.19 GB required (including padding), 118.1 GB available
04/05/2015 18:57:09.840 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:10.119 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:10.119 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:12.387 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:12.668 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:12.669 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.340 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:14.619 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:14.619 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.620 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-02-204937 containing 782.8 MB; 118.88 GB now available, 136.19 GB required
04/05/2015 18:57:22.106 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-03-181125 containing 31.6 MB; 118.92 GB now available, 136.19 GB required
04/05/2015 18:57:22.108 com.apple.backupd[433]: Removed 2 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:57:22.281 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:22.562 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:22.562 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:47.959 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-25-125849 containing 2.94 GB; 121.86 GB now available, 136.19 GB required
04/05/2015 18:57:47.960 com.apple.backupd[433]: Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:01.552 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-26-110446 containing 6.31 GB; 128.17 GB now available, 136.19 GB required
04/05/2015 18:58:01.554 com.apple.backupd[433]: Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-27-095120 containing 110.88 GB; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted 5 backups containing 120.95 GB total; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Backup date range was shortened: oldest backup is now Apr 28, 2015
04/05/2015 18:59:01.076 com.apple.xpc.launchd[1]: (com.apple.quicklook[533]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:59:09.015 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:10.846 nsurlstoraged[308]: purgeEntireFileSystemStore - failed to rename the current cache dir /Users/leopard/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple. mail/fsCachedData to new cache dir /var/folders/wv/x9z7l4911p33dv8jyv6nby6m0000gn/T/fsCachedData_remove. Errno=18
04/05/2015 18:59:14.837 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:51.249 spindump[412]: Saved spin report for System Preferences version 14.0 (14.0) to /Library/Logs/DiagnosticReports/System Preferences_2015-05-04-185951_Paul-Breedens-imac-5.spin
04/05/2015 19:00:05.000 kernel[0]: process WindowServer[154] caught causing excessive wakeups. Observed wakeups rate (per sec): 157; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 66094
04/05/2015 19:00:05.871 com.apple.xpc.launchd[1]: (com.apple.ReportCrash.Root[544]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
04/05/2015 19:00:05.875 SubmitDiagInfo[340]: Couldn't load config file from on-disk location. Falling back to default location. Reason: Won't serialize in _readDictionaryFromJSONData due to nil object
04/05/2015 19:00:11.473 spindump[412]: Saved wakeups_resource.diag report for WindowServer version ??? (???) to /Library/Logs/DiagnosticReports/WindowServer_2015-05-04-190011_Paul-Breedens-im ac-5.wakeups_resource.diag
04/05/2015 19:00:56.197 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 19:00:56.530 iconservicesd[59]: Failed to move temp file /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata.tmp to /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata with error: Error Domain=NSCocoaErrorDomain Code=516 "“B9FF2D6E-5D0C-1218-402C-B706F28B0A68.isdata.tmp” couldn’t be moved to “com.apple.iconservices.store” because an item with the same name already exists." UserInfo=0x7fb949c13070 {NSSourceFilePathErrorKey=/Library/Caches/com.apple.iconservices.store/B9FF2D6E -5D0C-1218-402C-B706F28B0A68.isdata.tmp, NSUserStringVariant=(
    Move
), NSDestinationFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0 C-1218-402C-B706F28B0A68.isdata, NSFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C -B706F28B0A68.isdata.tmp, NSUnderlyingError=0x7fb949c11ba0 "The operation couldn’t be completed. File exists"}
04/05/2015 19:00:57.204 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.211 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.796 QuickLookSatellite[545]: CGSConnectionByID: 0 is not a valid connection ID.
04/05/2015 19:00:57.796 QuickLookSatellite[545]: Invalid Connection ID 0
04/05/2015 19:01:02.753 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.824 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:02.837 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.896 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:08.015 com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.7940DB53-496F-47D2-87E2-C3EE3CBF1E27[545]) Service exited due to signal: Killed: 9
04/05/2015 19:01:19.128 apsd[75]: Illegal subject name missing 'courier.push.apple.com' (2.5.4.3): ({
    label = "2.5.4.6";
    "localized label" = "2.5.4.6";
    type = string;
    value = US;
    label = "2.5.4.8";
    "localized label" = "2.5.4.8";
    type = string;
    value = California;
    label = "2.5.4.7";
    "localized label" = "2.5.4.7";
    type = string;
    value = Cupertino;
    label = "2.5.4.10";
    "localized label" = "2.5.4.10";
    type = string;
    value = "Apple Inc.";
    label = "2.5.4.3";
    "localized label" = "2.5.4.3";
    type = string;
    value = "courier.sandbox.push.apple.com";
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.3 instead of 10.10.3. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 0   CarbonCore                          0x93ff9291 ___Gestalt_SystemVersion_block_invoke + 135
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 1   libdispatch.dylib                   0x9a9460b5 dispatch_once_f + 251
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 2   libdispatch.dylib                   0x9a9470d8 dispatch_once + 31
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 3   CarbonCore                          0x93f7269d _Gestalt_SystemVersion + 1050
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 4   CarbonCore                          0x93f717c0 Gestalt + 150
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 5   AdobeAFL                            0x016ebfae _ZN5adobe3afl12MacFileUtils13AFileToFSSpecERKNS0_5AFileER6FSSpec + 5254
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 6   ???                                 0x8feb70b3 0x0 + 2414571699
04/05/2015 19:01:28.908 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 19:01:28.952 Adobe InDesign CS5[550]: The function ‘CGSFlushWindow’ is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
04/05/2015 19:01:29.229 Mail[309]: XOAUTH2 requires user
04/05/2015 19:01:29.229 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
Hope this isn't too much ... thanks again for everyone's input.

Because a USB device was drawing too much power from your computer - bla, b

In the last week or so, my iMac (Intel CoreDuo) started displaying an error message every 30 seconds saying "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled", followed by some other useless "explanations" (which BTW can't even be copy/pasted). This has happened before (for about a year now) at every startup, but that was more acceptable; now that the message comes every 30 seconds it renders this machine unusable.
I tried it with or without any USB accessories attached, with or without powered hubs attached, I reset the PRAM and SMC and reinstalled the OS twice. The only option I have left is to trow this machine out and buy a new one (believe me, it's not going to be a Mac).
This shows not only the lack of quality of the hardware (crappy logic board and USB ports) but also a complete disregard for the annoyance these constant popping messages create to the end user when designing the OS. Just while writing this message I had to press the OK button about 10 times. It's AWFUL!!!

Hi cimula. before you turn to the extremes have you tried reinstalling snow leopard. maybe you had a problem occur when it was originally installed and is missing a driver or something. also take it to an apple store if possible. take everything needed to run the imac and show one of the geniuses the problem and 90% of the time if you are nice and calm they will gladly help and diagnose the problem even if it is out of warranty. no promises it will be free it could be a hardware malfuntion. just dont force your self back to pc once all of the problems are gone you will love it again. i switched from pc which i had been using my whole life after a friend showed me his macbook and have never looked back. of course once and a while there will an error, problem or whatever but is it worth switching to a pc which has to have a security program running 24/7 to stay alive and sucking up all of the cpu and slowing you down? hope i am helping Dean

Kernal Task in Mac 10.10.2 using up too much CPU

Is it true that kernel_task could be using too much ram its because I upgraded from and old OS: as an example from MAVERICS TO YOSEMITE ? If yes - how do I fix this?

Yes, I am backing up with Time Machine and also an external drive [LaCie]. As I have no other security programs on my Mac other than what the Mac itself offers - I was backup up to 2 external drives - now real do not see if that is necessary or causing additional problems. I checked out the internet and conservatively made some adjustments to System Preference in General and Privacy. I deleted and removed from the hard drive files and Applications which I really did not need - then completely deleted them from Trash. I should have kept a log of what i had done - and certainly will in future particularly if i need to ask for technical assistance. I started this journey because that little coloured twirling disk was driving my husband and me crazy and it took forever to open files and programs. I try to ensure that only those programs that we are using are open. After use I quit them. As we both are Seniors but enjoy the Mac and its freedom its important for me to be as informed about what I need to know about troubleshooting the Mac - unfortunately, the Internet has 60 answers for one question - yours, Mr. Davis, has been the most functional and analytical response so far. If you can bear with us perhaps you can direct us to where we need to go. I will say that after all the tweaks this morning - the system is running better ... although I really cannot say what the specific action were, if any, that made the difference. I should mention that our internet provider suggested that we weekly reboot our WiFi connection. Any assistance or direction you might recommend for future maintenance will be most gratefully appreciated.

Is it too much to ask for Apple to explain the content of the Console?

I've asked for definitions of terms for years now ... defintions of console terms and phrases such as the following example, each of which may well relate, in terms of the components and the Consoles ref to their "loading", to the ongoing, sophistcated penentration that manages to deinstall my ESET firewall and screw up desktop components across the board. None of third-party malware products have ever found a "threat" on my system, but the malicious activity continues. '
Unfortunately Apple long ago decided against helping their customers with the UNIX-based Mac, pretending to the world that new OS X Macs were as simple use as System 9 Macs, and just as secure. LOL. What a lie.
Apple exploits its reputation for not documenting its products by continuing to not document their products. Apple also continues to imply in all sorts of ways that a Mac is the most secure platform on the planet, ignoring the fact that its Firewall is a joke because, among other things, its "safest" setting — Block All Incoming Traffic — lets Bonjour traffic in, as if it or its Windows twin ZeroConfig are safe when in truth Bonjour is a massive back door that is almost impossible to shut off.
WHY DOESN'T APPLE DEFINE ITS CONSOLE MESSAGES, ESPECIALLY THOSE REPORTING ON COMPONENTS THAT ARE SUPPOSED TO BE DISABLED, SUCH AS ACTIVE DIRECTORY, WHICH HACKERS LIKE TO USE TO SET UP SHAM DHCP SERVERS?
WHAT DOES THIS MESSAGE MEAN? Plugin "Active Directory", Version "6.5.1", is set to load lazily.
Since I have the bad luck of being targeted, and since I know Active Directory represents a huge security hole unless it is used in a controlled environment (i.e., and office the infrastracture of which is used by IT staff to secure its at-work network), I know I don't want mdsresponder guiding a sham server through a firewall's "maximum security" setting.
SO, I SHOUT THIS QUESTION INTO APPLE'S ECHOING VOID: IS IT TOO MUCH TO ASK FOR A DEFINITION FOR: Is set to load lazily"?
Is there anyone with integrity left at Apple, or did they all leave when Bonjour was introduced?

Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789

Hi, im trying to download pictures from my camera but when I connect the lightning to usb camera adapter i get the message that there is too much energy required to support the device, can anyone help me?

Hi, I´m trying to use the lightning to usb camera adaper, but I get a message that ¨there is too much energy needed to support the device¨, so I can´t download my pictures, can anyone help me?

This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

Report is taking too much time when running from parameter form

Dear All
I have developed report in oracle reports bulider 10g. while running it from report builder data is coming very fast.
But, If it is running from parameter form it is taking too much time to format report in PDF.
Please suggest any configuration or setting if anybody is having Idea.
Thanks

Hi,
The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
If you still cannot determine the difference then trace both sessions.
Rod West

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

External HD claims to be drawing too much power, after 2 months of working

I have a 2.5" external HD enclosure from Mad Dog Multimedia that uses two USB connections, one for data and one for power. It's been working fine with my new Macbook Pro since I bought it several months ago, and continues to work fine with other comptuers. Last night I got a message that it was drawing too much power and the ports would be shut off. I unplugged and replugged it, and it continued to work all evening. This morning however, no matter what I do, it continues to tell me that its drawing too much power. This is baffling to me, because it has worked for the last few months, and still works on other computers, leading me to believe that something is wrong with my USB ports. Unfortunately I don't have much in the way of other USB devices I can use to test this hypothesis. Has anyone else encountered similar problems, and have you been able to resolve them successfully?

In the event you haven't done this already, shut down the computer and remove the external drive. Wait at least one or two minutes. Restart the computer then reconnect the external drive. See if your problem is resolved.
Try repairing the hard drive and permissions:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation complete. I also suggest you run Repair Disk on the external drive as well while you still have DU running. Now quit DU and return to the installer. Restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the above does not work, it is possible there's a problem with your OS X installation. It's difficult to know what that may be so you will need to experiment. First, restart the computer in safe mode. If this doesn't result in the problem ceasing, then try creating a new user account. Log out of your account and log into the new one. If this doesn't result in the problem going away, then more extreme measures are needed: reinstalling OS X. You might give this a try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Too much security

Similar Messages

Maybe you are looking for