Too much undo (control+z) when aligning objects

Sometimes control+z undoes too many actions when I am working on aligning objects. I suspect this is useful if you move a single object a bunch of times with the arrow key (and maybe is an intended feature of the undo function when aligning objects), but most of the time for me it moves the last handful of objects I moved to their previous locations. That's not help. Is there a way to prevent this?
Thanks!
Greg
v7.1

Hi Joe,
I didn't mean "align" as in one of the specific alignment function from the menu bar to be used on a group of objects.
For example, if I highlight an object and move it with the left arrow key 10 spaces, then I highlight a different object and move it in some other directions, using the shift+arrow key 5 times, and I continue this on any number of objects, all of the objects from all alignment operations, back to the last time I perform a completely different action such as creating an object, move back to their original locations when I press control+z one time. I would rather just the last object I moved return to its previous locations.
Thanks,
Greg
v7.1

Similar Messages

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

When i plug my brand new iPod into my macbook it won't sync and says usb disabled because its using too much power, worked fine when i first synced it yesterday

when i plug my brand new iPod into my macbook it won't sync with iTunes and says usb disabled because its using too much power. it worked fine all this week when i first got it

Might want to have your MacBook looked at.

Disable extra control points when selecting objects

The new control points that Illustrator has when selecting an object (in addition to the regular handles), how do I disable or hide them? I am working on artwork with many small pieces and these are REALLY getting in the way of moving and adjusting them. Looked through preferences and don't see a way to do it (for that matter, what are these annoying things called?)

View > Hide corner widgets

Firfox uses too much system resource. When idle it uses around 20% CPU and more than 500 mb each of real and virtual memory. Safarai uses 0% CPU and less than 100mb real and less than 200 mb virtual memory.

It causes my macbook pro 15" to get hot.

the very problematic plugin-cointainer is the cause of all this! i assume you may be open web page that contain flash right? high system resource slowing your browsing capabilities (click,tab,openpage, slowresponse,etc)
it is very common problem in windows. you can read it in here under Known Issues->http://www.mozilla.com/en-US/firefox/3.6.15/releasenotes/
+Some slower machines may see degraded mouse responsiveness when viewing certain Flash videos
This PROBABLY can happen in your macosx too. Im not sure for that.
I also try firefox in Ubuntu, and suprisely it smoothly open flash video and playing FB Poker at the same time wo performance degradation .
i cant give any solution for this unless they came out with better and enhanced performance of firefox for all systems.

Sun cluster 3.2 - resource hasstorageplus taking too much time to start

I have a disk resource called "data" that takes too much time to startup when performing a switchover. Any idea what may control this ?
Jan 28 20:28:01 hnmdb02 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for data
Jan 28 20:28:02 hnmdb02 Cluster.RGM.rgmd: [ID 350207 daemon.notice] 24 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<hnmdb.data.10>: Calling security_clnt_connect(..., host=<hnmdb02>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Jan 28 20:28:02 hnmdb02 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <hnmdb.data.10> has been resumed.
Jan 28 20:34:57 hnmdb02 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successfully for resource <data>, resource group <hnmdb>, node <hnmdb02>, time used: 23% of timeout <1800 seconds>

heldermo wrote:
I have a disk resource called "data" that takes too much time to startup when performing a switchover. Any idea what may control this ?I'm not sure how this is supposed to be related to Messaging Server. I suggest you ask your question in the Cluster forum:
http://forums.sun.com/forum.jspa?forumID=842
Regards,
Shane.

Taking too much time using BufferedWriter to write to a file

Hi,
I'm using the method extractItems() which is given below to write data to a file. This method is taking too much time to execute when the number of records in the enumeration is 10000 and above. To be precise it takes around 70 minutes. The writing pauses intermittently for 20 seconds after writing a few lines and sometimes for much more. Has somebody faced this problem before and if so what could be the problem. This is a very high priority work and it would be really helpful if someone could give me some info on this.
Thanks in advance.
public String extractItems() throws InternalServerException{
try{
 String extractFileName = getExtractFileName();
 FileWriter fileWriter = new FileWriter(extractFileName);
 BufferedWriter bufferWrt = new BufferedWriter(fileWriter);
 CXBusinessClassIfc editClass = new ExploreClassImpl(className, mdlMgr );
System.out.println("Before -1");
 CXPropertyInfoIfc[] propInfo = editClass.getClassPropertyInfo(configName);
System.out.println("After -1");
 PrintWriter out = new PrintWriter(bufferWrt);
System.out.println("Before -2");
 TemplateHeaderInfo.printHeaderInfo(propInfo, out, mdlMgr);
System.out.println("After -2");
XDItemSet itemSet = getItemsForObjectIds(catalogEditDO.getSelectedItems());
Enumeration allitems = itemSet.allItems();
System.out.println("the batch size : " +itemSet.getBatchSize());
XDForm frm = itemSet.getXDForm();
XDFormProperty[] props = frm.getXDFormProperties();
System.out.println("Before -3");
bufferWrt.newLine();
long startTime ,startTime1 ,startTime2 ,startTime3;
startTime = System.currentTimeMillis();
System.out.println("time here is--before-while : " +startTime);
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
 String value = item.getStringValue(props);
 if(value == null || value.equalsIgnoreCase("null"))
 value = "";
 if(i == 0)
 aRow = value;
 else
 aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --new: " +startTime1);
bufferWrt.write(aRow.toCharArray());
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
startTime3 = System.currentTimeMillis();
System.out.println("time here is--after-while : " +startTime3);
 out.close();//added by rosmon to check extra time taken for extraction//
bufferWrt.close();
fileWriter.close();
System.out.println("After -3");
return extractFileName;
catch(Exception e){
 e.printStackTrace();
throw new InternalServerException(e.getMessage());

Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
 while(allitems.hasMoreElements()){
 String aRow = "";
 XDItem item = (XDItem)allitems.nextElement();
 for(int i =0 ; i < props.length; i++){
 String value = item.getStringValue(props);
 if(value == null || value.equalsIgnoreCase("null"))
 value = "";
 if(i == 0)
 aRow = value;
 else
 aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance

Oracle taking too much memory in Linux

Hi.. I am using Oralce on linux 7.5
No any active session is running on server for oracle ..
But oracle taking too much memory in linux when I check with TOP command ..
16:08:29 up 19 days, 20:14, 2 users, load average: 5.32, 4.63, 3.78
227 processes: 226 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: cpu user nice system irq softirq iowait idle
total 2.5% 0.0% 2.9% 0.4% 0.0% 91.8% 2.2%
cpu00 3.8% 0.0% 3.8% 0.0% 0.0% 92.2% 0.0%
cpu01 0.4% 0.0% 0.0% 0.0% 0.0% 99.5% 0.0%
cpu02 0.8% 0.0% 4.7% 1.7% 0.0% 85.7% 6.8%
cpu03 5.1% 0.0% 3.0% 0.0% 0.0% 89.6% 2.1%
Mem: 8203404k av, 8186192k used, 17212k free, 0k shrd, 7292k buff
6266516k actv, 1275016k in_d, 136704k in_c
Swap: 6289384k av, 10528k used, 6278856k free 7602904k cached
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND
6224 oracle 15 0 1007M 1.0G 998M D 0.0 12.5 30:45 1 oracle
10628 oracle 15 0 1000M 998M 998M S 0.0 12.4 0:16 0 oracle
6230 oracle 15 0 945M 945M 943M S 0.0 11.7 82:33 1 oracle
10188 oracle 15 0 944M 942M 931M S 0.0 11.7 3:02 1 oracle
19128 oracle 15 0 909M 901M 899M S 0.0 11.2 2:49 2 oracle
6864 oracle 15 0 886M 886M 877M S 0.0 11.0 6:12 3 oracle
18586 oracle 22 0 883M 882M 880M D 1.9 11.0 1:15 0 oracle
6870 oracle 15 0 433M 432M 431M S 0.0 5.4 0:21 2 oracle
6421 oracle 15 0 337M 336M 335M S 0.0 4.2 1:07 2 oracle
8478 oracle 15 0 272M 271M 269M S 0.0 3.3 0:12 1 oracle
18250 oracle 15 0 256M 255M 252M S 0.0 3.1 0:38 0 oracle
6876 oracle 15 0 251M 250M 249M S 0.0 3.1 1:03 0 oracle
17926 oracle 15 0 225M 224M 223M S 0.0 2.8 0:01 1 oracle
19320 oracle 15 0 197M 196M 195M S 0.0 2.4 0:23 1 oracle
18116 oracle 15 0 168M 167M 165M S 0.0 2.0 0:04 2 oracle
19596 oracle 15 0 159M 158M 155M D 2.2 1.9 0:17 0 oracle
6228 oracle 15 0 156M 155M 142M S 0.0 1.9 12:05 1 oracle
18902 oracle 15 0 81612 71M 48364 S 0.0 0.8 3:07 3 oracle
19286 oracle 15 0 48420 46M 46412 S 0.0 0.5 0:03 0 oracle
6222 oracle 15 0 41496 40M 39684 S 0.0 0.4 9:38 3 oracle
19602 oracle 15 0 40324 38M 38164 S 0.0 0.4 0:00 2 oracle
5962 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 1 mysqld
5963 mysql 15 0 39168 38M 88 S 0.0 0.4 0:08 0 mysqld
5964 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5965 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5966 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5967 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5969 mysql 15 0 39168 38M 88 S 0.0 0.4 2:16 2 mysqld
5970 mysql 15 0 39168 38M 88 S 0.0 0.4 2:31 1 mysqld
5971 mysql 24 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5972 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
6868 oracle 15 0 27312 26M 15204 S 0.0 0.3 8:21 3 oracle
19554 oracle 15 0 20920 19M 18192 S 0.0 0.2 0:00 3 oracle
6874 oracle 15 0 16904 16M 15400 S 0.0 0.2 1:15 1 oracle
19444 oracle 15 0 13636 12M 12004 S 0.0 0.1 0:00 1 oracle
19442 oracle 15 0 12964 12M 11324 S 0.0 0.1 0:00 1 oracle
19474 oracle 15 0 12708 12M 11076 S 0.0 0.1 0:00 2 oracle
Why oracle taking too much memory?
Any solution for this bec of that my updation takes too much time .
Edited by: harshalpatil on Oct 13, 2008 4:11 PM

Harsh,
1) What version of Oracle you running on 7.5 release of linux?
2)How did you come to the conclusion that because of this, your update is slow?
Cheers
Aman....

Text not aligning right - too much space on top or bottom in tables

Hi,
I am in the process of learning DW myself and building my own website, but have run into problems putting my cv into a nice format.
Here is the link:
http://www.junjundesigns.com/cv.html
First of all, in dw, it looks much different than it does when it loads in my firefox.
The problem that I can't solve is how the text on the left in the body does not align to the top of the box, to equal height of the text in the right is.
For example, I want "20047 Jul-Present" to begin at the same level/height as "Etam Clothing Company Ltd. - Designer Manager", and subsequently I want the next item "2007 Apr-Jul" to align to the top of "The Collection..." and so on.
I checked the codes and I don't find any extra /p or br/ breaks, and tried putting more in and taking some out with the same results or just not what I want.
Please help. Thanks!

I have two suggestions:
1. Vertically align your table cells to Top:
<td width="172" valign="top" bgcolor="#0099FF">2007 Jul-Present Shanghai, China</td>
<td width="684" valign="top" bgcolor="#0099FF">Etam Clothing Company..............
2. Learn to lay your pages out with CSS instead of tables. You will have much more control with positioning elements on a page.

Mackie Control Pro drawing too much power from usb?

I have a Mackie Control Universal Pro connected to my 2.8GHz Intel Core 2 Duo with 4GB rom, running OSX 10.5.4.
When I first hooked up my Mackie Control Pro (about 1 year ago) it worked perfectly. A bout 2 months ago my computer wouldn't recognize it anymore. I keep getting this message telling me the device is drawing too much power from USB port and due to that it will shut down that specific port.
My MCP is plugged to the electrical outlet and shouldn't need to be drawing power via the USP. I tried disconnecting all other devices hooked up via USB and Firewire beside the keyboard and mouse but same massage keep coming.
I checked the MCP to make sure the electrical wire was plugged in properly and supplying it with power, I also tried hooking it up with different USB cables via different ports but problem still there.
Can anybody help me out please this is starting to be a big head ache. Any help would be great.

Not 30 seconds after submitting the question I did just that. I felt stupid not thinking of that simple check. Thanks for the quick reply. It worked just fine with another cable. It appears we need a new cable for my daughter....
Thanks again.

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. This shows up even when I am not connected to a USB. what do you think the problem is?

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?

Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?

I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?

You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

Too much undo (control+z) when aligning objects

Similar Messages

Maybe you are looking for