Too yellow skin on prints.

Hello,
Using Epson 2880, Problem is that my prints has huge amount of yellow in them. What could be an issue.
Calibrated with spyder, PS SC4 manages colour, Harman paper profile in printer profile, colour management off in printer.
What I'm doing wrong.Just toooo yellow on facial skin.
Thanks.

To be honest, I thought I saw these yellow splotches (small splotches) myself, early when I bought it.
I thought I was looking at a bright yellow light (like glancing at the outdoor light) and then looked at the iPhone screen. (And you know when you stare at something bright and look elsewhere quickly, you get that natural aversion to bright light affect.)
Then the next day I saw it again on the iPhone, knowing that I didn't look outside at all.
Thus, you may be right, it might have something to do with the heat generated by the phone.
However, since then I've never seen those yellow splotches again. I have had the phone since the iDay.

Similar Messages

  • Cyan and yellow are not printing on HP officejet pro 8500 all-in-one printer A909

    I have an Officejet Pro All-in-One 8500 A909a printer, using OS X operating system.  Cyan and yellow are not printing. I've ran the Print Quality Diagnostics Page and they do not show up there or on the align page. My ink levels are good. 
    Can you help me find and fix the problem?
    Thanks

    Hi DavidM2,
    Welcome to the HP Forums.
    I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you are still having issues then try to replace the cartridges.
    Let me know how you make out and if you have any other questions, feel free to ask.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • RH7 - Custom WebHelp Pro skin custom "Print" button does NOT display in version published to RH Server 8

    I customized a WebHelp Pro skin using the Omega skin as the basis. Everything works fine except the Print button, which I added using the same Action as shown in the BeautifulVista skin's Print button.
    Local Version (C: drive)
    When I generate my help project and view it locally from my C: drive after I accept the warning about viewing locally, I see the Print button.
    However, it does NOT work.  I've attached a graphic that shows the local version and the skin dialog where I set up the action for the Print button.
    RH Server 8 version
    When I view the same project after I publish it to the server, the Print button does NOT display.
    QUESTIONS ARE:
    How do I get the Print button to function properly (active printer dialog)?
    If it can't work until it is published that fine but then how do I get it display when I view from server?

    Hi there
    Have you tried editing your Window Definition?
    Click View > Pods > Project Setup
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • My image is too large for the print service. Best options...

    I shoot with a Nikon D800. It appears the images are too large for the print service. What's the best method to reduce file size? Open in Photoshop, edit size, and return to Aperture?

    You would have to look in your TV settings, that is likely the issue.

  • Red and Yellow won't print on my Officejet Pro L7580

    My L7580 has been printing fine, all of a sudden the blues and yellows do not print.  It started first with the blues, then also the yellows.  Reds and Black seem ok.  I have done everything suggested on the Print quality diagnotic page (align, clean & calibrate) that did nothing.  Based on suggetions in this forum I took out the print heads and cleaned the electrical contacts, being sure to not to touch the ink nozzles.  My ink supply if fine and my printer head inticate "yellow", with what appears to be still plenty of ink left.
    Thank you for your help.
    Winefred

    I posted wrong colors in heading.  the red is fine it is the blue that is not working.
    Winefred

  • Yellow does not print

    On 2230 inkjet. yellow does not print
    Have cleaned, reset, aligned all heads and all cartridges are full.
    Health of all 4 colors are from 90 to 100%
    Any suggestions as to why Yellow will not print?

    Hi @bad_woman,
    Welcome to the HP Forums!
    I see that your HP Officejet 6600 is not printing in yellow. I am sorry to hear this, but happy to help!
    Please take a look through this print quality guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 6600 e-All-in-....
    Hope this guide helps, and hope to hear from you soon!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Email prints too small to read, prints OK in I

    When I print emails, they are too tiny to read. They print fine if I print them with IE 9. I use verizon webmail and have a Brother MFC-J615W printer. Until recently, Emails were previously printing fine. I have Dell XPS 8300 desktop computer running Windows 7 64 bit home premium.
    Thanks,
    Truman

    When I print emails, they are too tiny to read. They print fine if I print them with IE 9. I use verizon webmail and have a Brother MFC-J615W printer. Until recently, Emails were previously printing fine. I have Dell XPS 8300 desktop computer running Windows 7 64 bit home premium.
    Thanks,
    Truman

  • Why do my photos come out too dark when I print them?

    Bonjour from France,
    I am trying to print photos but they come out too dark. We have just bought a new mac mini, and are trying to learn how to use it. We are using a Canon printer. Any help would be appreciated.
    thank you,
    maorisun

    What colour profile are the Photos? What is the Printer set to use?
    Regards
    TD

  • The print is too big when I print something from a website

    This is probably the fault of my computer & not Firefox but when I print something from a website the print size is too big. How can I change this...

    File > Page Setup = '''Scale''' <br />
    100% is usually best
    If you can't see the Menu Bar with File, Edit, View, etc - hit the '''Alt''' key to temporarily reveal the Menu Bar.

  • Too slow to bring printer window after click File...Printer. Adobe Acrobat Pro 8

    I have Adobe Acrobat Pro 8 in my computer. After opened my PDF file, I went to file and click on printer. It took too long to bring this printer window up to screen even I have small file 700KB (~ 10min.). Is someone have a same problem as I was. Please help.
    Thank you

    Thank you for reply back my problem. I opened my pdf file with 700kb size and after I clicked file--printer (or page setup), it took 10 to 15 min (sometime it takes 30 min) to load printer setup window or printer window where I chose my printers. Even the small size of my pdf files (less than 700kb), I have to wait 10 min. to 20 min.for the printer windows screen to be showed.

  • Too much red when printing photo on e-All-in-One-C310. Color profile needed.

    Hi.
    I just bought e-All-in-One-C310 and tried to print some photos - every time there is too much red color. Inks (cartridge) are HP original, paper is also from HP (Advance HP photo paper). OS - Windows 7.
    It seems that I need a color profile but I can't find one on HP web-site. Can anyone help me?
    Thank you in advance.
    Ugine.

    Hi , I see by your post that the copies are coming out blank and the black is printing in gray. I will certainly do my best to help you. Please try the steps in these documents to see if it will help resolve this issue. Disregard the titles. Fixing Print Quality Problems for the HP Photosmart Premium Fax All-in-One Printer Series (C410a, C410b, C410c, C410d, C410e). An 'Incompatible Cartridge' or 'Ink Cartridge Problem' Message Displays for HP Photosmart Premium Fax e-All-in-One Printer Series (C410). HP Inkjet Printers - 'Ox...' or 'C2...' Error Code Displays. I have also provided some steps to resolve issues when trying to print from the Mac. Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer.Then click on the Add button. Are you using Genuine HP Cartridges?
    What are the ink levels?Let me know the results of the Print Quality Diagnostic Report? If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

  • Firefox won't print 'highlights' made by a marking tool on a form. I have enabled 'Print backgrounds' options and the yellow image overlays print fine in other browsers. Is this a setting within windows 7?

    I am trying to print a document through Firefox. We have a Form view / marking tool to make these image overlays to make highlighted boxes on the document.
    It prints the yellow 'highlight overlays' fine in all other browsers and in OSX using firefox, but the highlighted boxes won't print in Firefox using Windows 7.
    I have the 'Print backgrounds' option checked in Firefox settings.
    Please advise.

    I am trying to print a document through Firefox. We have a Form view / marking tool to make these image overlays to make highlighted boxes on the document.
    It prints the yellow 'highlight overlays' fine in all other browsers and in OSX using firefox, but the highlighted boxes won't print in Firefox using Windows 7.
    I have the 'Print backgrounds' option checked in Firefox settings.
    Please advise.

  • How can I unclog the printhead of a Pro 9500 printer? It's too clogged for the printer utility.

    Hi,
    How can I unclog the printhead on a Pro 9500 printer? The printer utility cannot do it. It's too clogged for that and just uses up the ink without unclogging it. I tried the "Magic Inkjet Flush" but that didn't completely clear it. I wasted a lot of ink in the process. I'm thinking of just taking the printhead out and somehow soak it in an ammonia solution. Is there a way of doing this and will it work?
    Thanks,
    Bill

    Hello artjewel.
    Unfortunately, we cannot recommend that any parts are physically cleaned.  We can only recommend that the Cleaning and Deep Cleaning options in the printer maintenance section are used.
    If the quality issues persist once these cleanings have been done, please contact our support group using the link below for additional assistance.
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Frefox prints too large. Exploerer prints normal. How do I fix Firefox

    When I print web pages when using Firefox the print font too large. When I print from Explorer it is normal size (10 or 12 point)
    == This happened ==
    Every time Firefox opened
    == Not sure but I did have my machine serviced recently

    It suddenly started to print very large print. It is normal on IE. How can I fix this? I tried resetting it but it did not change it back.
    Linda

  • What can I do if OS X Lion is too new for my printer to set up its wireless capabilities

    When I try to set up the wireless printing capabilities for my printer, it says that OS X Lion is too "new" to be used in order to begin setup. What can I do?

    You can go to the manufaturers website to see if there is an updated driver for your machine that will help it communicate with Lion,
    To update the driver routine you may have to make a hard conection via a USB cable to your printer from the mac

Maybe you are looking for

  • Can I pay some money at my local apple store to get my iPhone 4 replaced with a new one?

    Title says all I want to replace my iPhone 4 old with a new iPhone 4 new at a local apple store I think it's out of warranty if I pay more money is it possible?

  • Does the Microsoft desktop 2000 work on the new Mac mini (2011)

    I was wondering; does Microsofts desktop 2000 wireless keyboard and mouse work with the new 2011 Mac Mini? It says it requires a disk installation for software or something like that, and the new mini doesn't have an optical drive.. Please answer as

  • Wildcard parameter in Discoverer

    Hello - I have set up several parameters in a Discoverer 4i report. For some of the parameters I have set a condition of "LIKE" for the user input. For these parameters I would like the users to have the option of putting in a wildcard value (%) if t

  • Error message when viewing HTML5 on IE10

    Hello, I have a simulation created in Captivate 6 and publisged in HTML5. I have incorporated the HTML5 output into a Lectora file, published as SCORM and loaded to our LMS. When I try to view the Captivate simulation, I get an error message that sta

  • Do you use IDE?

    Just curious, as to what IDE you folks use. netBeans with wireless modules? Eclipse with wireless support? Plain J2ME WTK? Java Studio Mobility? JBuilder? Why did you choose the one you use and what are the features that make you stay with it? Lookin