Took a video rather than still pic by mistake. How do I print one frame?

Took a video by mistake instead of a single pic. How do I print one frame?

There are apps such as Video 2 Photo (I haven't tried it) that apparently allow you to extract frames from a video

Similar Messages

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

RTSP stream downloads video rather than displaying...

I've got an internet security cam that I can view on my PC as an RTSP stream with Quicktime, Windows Media Player, Real Player, etc.
My E71x has Real Player and when I enter the same address that streams on my PC, the MediaNet app starts to download the stream, rather than displaying the video. It will go as long as I leave it, downloading MB of data.
Does anybody know how to get this RTSP stream to display as video rather than download? I've tried Opera and Bolt but neither pull up Real Player like MediaNet. I know the RTSP on the phone must be working because the YouTube app works like a champ.

You can specify a folder on a computer (or iPhoto events etc on a Mac) though you may not get perfect control over display order.
Use iTunes>File>Home Sharing>Choose photos to share etc
iTunes would need to be running on teh LAN to support this.
AC

Video controls under video rather than on top?

Any way of making the video controls that Edge make under the video rather than on top of the video?
ie in my example below it's interfering with the white arc and text...
Thanks in advance.

Buttox. I hereby submit a request
Or is there a request area I should be doing that?

Each time I open Safari it opens the last web page I was at rather than my home page. How do I stop this from happening?

Each time I open Safari it opens the last web page I was at rather than my home page. How do I stop this from happening?

This is part of Lion's Resume feature (I assume you are on Lion).
A couple of things you can do: System Preferences>General and deselect 'Restore windows when quitting and re-opening apps'.
Also when you shutdown or restart make sure the following is unticked:

Thinking that I was deleting from my iPod, I have inadvertently deleted a lot of music from my iTunes library. I clicked for retaining on file rather than sending to trash. How do I get this music back from file into my library?

Thinking that I was deleting it from my iPod, I have inadvertently deleted a lot of music from my iTunes library. I clicked for saving to file rather than sending to trash. How can I get it back into my library?

See Empty/corrupt iTunes library after upgrade/crash or simply import the media folder back into the library. Restoring a recent backup of the .itl database will restore the original date added values, ratings, play counts, playlist membership, etc. that would otherwise be missing from the reimported media.
tt2

HT1391 After deleting a purchased video that, then re-downloading I now have the same exact video showing twice in iTunes & iPhone. How do I get one to go away?

After deleting a purchased video that, then re-downloading I now have the same exact video showing twice in iTunes & iPhone. How do I get one to go away?

Verify/repair your disk first (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there's enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it's running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
BTW, you haven't answered which mailbox has the problem. I could be that just rebuilding that mailbox fixes it -- you should verify/repair the disk and make a backup copy of the Mail folder first, nevertheless, though.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

Inserting line in video rather than hanging in air in adobe premier pro

I want to draw a line in a video on the last layer of the video.Like if i hv taken a video of a part of roads with vehicles runningOn it and i need to draw a line on the surface of the road.I am trying and the line which i put in the video.it used to hang inThe air with vehicles going down from under the line which i hv drawn.but i need that the line should be look like as if it attached To the roads and vehicle passing over it..which actuallyShould look as real video with line attached to the surfaceOf the road rather than hanging in the airI am very new to adobe.and trying for it and i am in urgent needOf it's solution.thanks in advance.
what i am doing is open the video from premierPro cs5 and drag that video in video 1 pane.and then press Ctrl t and put the line in the imageand save and after that drag that Sequence to video2 pane and then save..after that i click on theExport button..but the desired output of line on the last layer surface ofThe video..i know there r much steps after that like aftereffectWhich i do not know.please help me i am very newbie.please explain itTo do step by step to achieve the desired result.

Thank you for responding.
I took your advice and in the Capture window there’s an option near the bottom right that states “Capture” and below that is a button “In/Out”. I guess this is what you are talking about. So I click on the button, “In/Out” and I get a pop up the states, “Invalid time code range”. How is the average use supposed to know what this cryptic message is saying? (user unfriendly).
I see two icons that look something like brackets that is to the left of the play button. I clicked on these but nothing seems to happen. I don’t know what is going on. (user unfriendly).
Perhaps since I need just a typical You Tube video, I should purchase video capture software that is more users friendly and less intuitive. That being said, MS Movie Maker does not show the option “Capture from video device” I may try video capture software on CNET.com that is recommended and has a money back guarantee. I paid a lot of money for my Adobe Premier, but being that I am in Windows 7, perhaps it is time to retire Adobe.

Custom pics in Address Book rather than Facebook pics?

How do I get Mac Mail to reference pics from contacts cards "On My Mac" rather than "Facebook" contact cards (for the same person) without permanently disabling Facebook syncing in Address Book? I'd rather use my own pics for some of these people.

Hi Rhys.Perrin,
This article describes how to change a contact's image to one of your choosing:
Contacts: Add or change contact pictures
http://support.apple.com/kb/PH11580
I hope this helps!
- Ari

I added a stock quote to my Chrome and now all the tabs show a live quote for Google rather than Calendar, Notes etc..How do I remove it?

How do I remove the live stock quote from the tabs on my iCloud features. I had downloaded a stock feature but now all my tabs show Google's stock price rather than Note, Calendar etc.

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

Close tab groups actually closes tabs rather than just the grouping. How do I recover all tabs, not just the last 10? Pages and tabs are not in recent history.

I had a problem with tab groups - if I mistakenly close tab groups, I can only recover the last 10 tabs.
I had a window with many more than 10 tabs which I reopened each session by going to History > Recently Closed Windows. I knew this was risky - I could lose this if I did not keep it in an open window or recently closed window. So I was looking for a way to save this window with all the tabs. I looked into tab groups and, not knowing what I was doing, I closed the groups of tabs. There seems to be no recovery for other than the last 10 tabs. And open tabs are not necessarily in recent history if I have not accessed the tab and refreshed.

I don't use tab groups myself, but I know of a way to increase the number of closed tabs that Firefox remembers. Unfortunately, it's not retroactive...
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered
(3) Double-click the following preferences and enter the preferred new value:
(A) '''browser.sessionstore.max_tabs_undo''' (default: 10)
(B) '''browser.sessionstore.max_windows_undo''' (default: 3)
Regarding what is in history, by default, Firefox will load tabs on demand when you restore a session, rather than loading every single tab immediately. If you turned off that setting, or if you visited all the tabs, then those pages should be in history, but finding them amidst all the others would be quite a challenge...

When I click on a bookmark stored in my bookmark toolbar it opens in a sidebar rather than a new tab. How do I get it to open in a new tab?

I just set my bookmark toolbar up with my most often used URL's. However when I click on a bookmarked URL from my toolbar, it opens in a sidebar to the left on my main screen, rather than in a new tab. The sidebar is cumbersome because I have to scroll around to see the entire screen. How do I get the URL to open in a new tab, not in the sidebar?

Opening in the Sidebar is the default action for bookmarks that are created via a "Bookmark this Page" link or button on a website. Make sure you use the many "Bookmark this Page" methods that are in Firefox instead.
Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.

When clicking on an attachment to an email, it will only save rather than save or open. How can I change the setting to allow me to open an attachment before deciding whether or not to save it?

There is a dialog box that appears when I click on an email attachment that asks whether to open or save a .pdf document, and whether I always want that action to be taken. However, when clicking a .doc or .docx document, I no longer have the choice. How can I revive the dialog box to choose to 'open' the file rather than being forced to 'save' the file?

Try to clear the cache.
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
See also:
* http://kb.mozillazine.org/File_types_and_download_actions
You can rename such files with a .html file extension and give them a .jpg file extension to make applications see them as an image.<br />
If Windows is stubborn and keeps the .html file extension and you end up with image.jpg.html then add quotes around the name ("image.jpg")

Can I somehow teach my 6th gen Nano to tell me how far I've walked in miles rather than "steps," by telling it how long each of my steps is?

Using the pedometer in a 6th gen Nano:
Currently, it (very accurately) tells me how many steps I've taken when I go for a walk. Works fine.
Meanwhile, on my own, I carefully calculated how far each of my "steps" is (2.231 feet/step, in case you're curious).
Thus, after each walk, I multiply the number of steps I've gone by 2.231 to get the number of feet I have traveled, and then divide by 5,280 to get the exact distance I've traveled in miles.
While this system works fine enough, I'd like to avoid having to do a bunch of arithmetic after each excursion. So I ask:
Is there any way to input into the Nano the exact distance of each of my personal steps, and then have the Nano automatically display to me the distance of a walk in mile units of measurement, rather than (or perhaps in addition to) simply the number of "steps" I've taken?

I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

How do I print a frame from a video I have in iPhoto or iMovie?

I have a video in iphoto and imovie, and I would like to send/print out one frame, as a still picture. Is this possible?

Maybe this thread will help:
https://discussions.apple.com/message/17451305#17451305

Took a video rather than still pic by mistake. How do I print one frame?

Similar Messages

Maybe you are looking for