Tool Menu Stopped working in Photoshop CS6 Mac?
Today when I opened my Photoshop CS6 on my Mac in OS 10.9, the tool menu stopped allowing me to select a different tool by clicking on the lower right arrow in the tool boxes. Before, I could click on , say the brush tool, and hold the mouse down to select a different kind of paint brush. Now nothing happens when I click?
I tried trashing preferences, checking my mouse preferences, etc. Nothing seems to be different, and yet this maddening behavior has taken over.
Right click does open up the menu, but I much prefer the old way.
Anyone encounter this problem?
The popup list seems to have a time delay built in that at times I have seen not work. A right click the will usually pop up the list. Resetting tools and preferences and reboot is wort a try to fix the behavior
Similar Messages
-
Liquify Tools won't work in Photoshop Cs6
I am trying use the liquify effect on my images shot using a Canon 50D and none of the tools seem to work. I have successfully used the liquify effect on stock images obtain/purchased from the internet, so I am confused as to what could be the problem. I am able to select the tools, but to no avail. I tried to start the liquify feature using the CMD+Filter+Liquify action, but it did not fixt the problem.
Using CS6
Mac Mini
2.53 GHz Intel Core 2 Duo
NVIDIA GeForce 9400 256 MB
4GB RAMThe Adobe published minimum requirements for Photoshop CS6 (or any other version, really) are laughably optimistic. Sure, Photoshop will launch with your measly 4GB of RAM on your laptop, but how well it performs is another story.
These days 8GB of RAM is considered the bare minimum to run Photoshop CS—which of course should be updated to Photoshop CS6 version 13.0.6. -
3D Mode Tool are not working in Photoshop CS6
Hello everyone. First, I want to tell you that I use ATI Radeon HD 6730M with 12.2 driver series. and I just found out that my Photoshop CS6 3D mode tool not working in advanced drawing mode, like this.
As well as normal drawing mode. Please help to fix this problem.When you changed the options in the Preferences - Performance - Advanced Options section, did you close Photoshop and restart it before testing? That's necessary or you won't be testing what you think you are.
Assuming you have done so, if you have exhausted the various GPU options, I don't think you have any other options beyond waiting for a new and improved display driver. I suppose it's possible the Adobe folks might improve their code to make it work better on different setups, but generally speaking these kinds of things seem to be glitches in the display driver.
I just tried a similar operation to what you're doing on my Radeon HD 5670 with Catalyst 12.6 drivers and it seems to work okay.
-Noel -
The lasso tools worked great before i upgraded to Yosemite.. Some one please help.
I have the same problems. There are not answers anywhere.
-
How do I change a default from feathered edge to sharp edge when I select a path?
I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.
-
Wacom Tablet Pen Pressure stops working in Photoshop after using Lightroom Local Adjustment Brush
Hi all,
I am experiencing a problem with my Intuos Pro Medium (driver 6.3.9w3 on Windows 8.1)
I am using Lighroom 5.6 and Photoshop CC 2014.
I an get the pen pressure to work in Photoshop without any problem. However, if I go into Lightroom and use the Local Adjustment Brush and then transfer the photo into Photoshop (Right Click Edit In => Edit in Adobe Photoshop 2014 CC) then the pen pressure stops working in Photoshop.
Really frustrating... The only workaround is to close both Photoshop and Lightroom, then reopen Photoshop, then usually the Pen pressure feature starts working again.
Has anyone experienced this before or has any idea how to fix this?
Thanks,
GuillaumeYour tablet driver isn't reporting pressure correctly.
The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
Contact your tablet maker to see if they have updated drivers to fix their bugs. -
I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply. -
Oracle BI Administration tool has stopped working
Just now finished the 11g installation.But im not able to open BI Administrator.Im getting this error.Please help.
"Oracle BI Administration tool has stopped working
A problem caused the program to stop working correctly.Please close the program"I followed the below steps(taken from this forum) for installing OBIEE11g 64 bit version in a 64 bit machine.Installation completed successfully.But not able to open BI Administration tool.Any suggestions???
There is not a particular 64bit installation. I think it works like this: if you are using a 64bit JDK the apps server is also running 64 bit.
You can find the generic jar here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
You install this by a command like this (you have to look up the documentation): java -XXm.... .... wls1033_generic.jar
Then a installer pops up.
So these were my steps:
- installed RCU
- installed 64 bits JDK (jdk-6u21-windows-x64.exe)
- installed Weblogic (wls1033_generic.jar)
- installed OBI as "software only"
- configured OBIi (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
All together it does not take much longer then the 32bit install. Only some extra steps to do.
--------------------------------------------------------------------------------------------------------------------------------------------------------------- -
The color replacement tool does not exist in photoshop cs6
Hi guys!
I have a huge problem with my new photos hope cs6, it doesn`t have a Color replacement tool button, I mean this
Icon
In addition I searched category under brush tools but it doesn`t exist
Just I have color replacement in
Image > Adjustment> Replace color
Is it the same with that toolHi,
the color-replacement tool is still there in CS6, "under" the brush-tool in the toolbar of photoshop-CS6.
Reveal it by alt-click on the brush...
did I understand your question right?
If you want a tool-preset of the color-replacement like the other tool-presets in your screenshot,
you choose the tool first and then you can make a new preset for your special color-replacement-tool,
including size of your point etc... -
Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.
Follow write permission on thread below - same error message
Re: CS6 updates and Mac write permissions
Need Adobe help to solve this. My own searches in Forums and Google all have failed.It is not an Adobe problem. You have a OS permissions problem. You can try to correct this by using Disk Utility to Repair Permissions. It is in the First Aid area of Disk Utility.
-
Bookmark bar and menu stop working after awhile on Firefox 12
I have upgraded to Firefox 12. Everything works fine when I start up Firefox, but after some amount of use (and I can't always reproduce this) eventually when I click on bookmarks in my Bookmark Bar or from the Bookmark menu, nothing happens. Firefox doesn't load the bookmark. If I open the "Show All Bookmarks" window and click on bookmarks there, they load fine and then the menu and bookmark bar suddenly start working again. If I close the "Show All Bookmarks" window the Bookmark Bar and menu stop working again.
Hi ischou,
I haven't heard of this particular issue, but you might want to try starting Firefox in [[Safe Mode]]. Let is sit for a while as you described above and if you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps! -
Receiving a "FIXMAPI 1.0 MAPI Repair Tool has stopped working" error
One of our users has Windows 7 Installed. When she emails out attachments, she right clicks it and chooses to "Sent To" and then selects "Mail Recipient".
It opens and creates a new email fine. Upon pressing SEND it gives a "FIXMAPI 1.0 MAPI Repair Tool has stopped working" It does successfully email.
I attached a screenshot.Hi,
Have you tried to repair the Office for the user?
If that won't work, open the Explorer, and navigate to
%APPDATA%\Microsoft\Windows\SendTo
Delete the file named Mail recipient. (Make a backup before you doing that, or you can just move it to the other folders.)
And then open folder
C:\Windows
Find the file named Win.ini, open it with Notepad, find the section that begins with [Mail], and then add the following lines. Some lines may already exist, but you need all of them for this feature.
[Mail]
MAPI=1
CMC=1
CMCDLLNAME=mapi.dll
CMCDLLNAME32=mapi32.dll
MAPIX=1
MAPIXVER=1.0.0.1
OLEMessaging=1
Save it and quit Notepad, restart the Computer.
See if we can get rid of it.
Sincerely,
Max Meng
Forum Support
Come back and mark the replies as
answers if they help and unmark them if they provide no help. -
KTpass.exe - Kerberos keytab tool has stopped working
Hi,
I'm trying to setup single sign in my firewall which requires me to use KTpass.exe to create a kerberos key.
I've never used Ktpass.exe - and i do not know how to use it. I simply follow instructions from my firewall tech and I'm suppose to run this command.
ktpass -out c:\key.fw -princ FirewallLogin/[email protected] -pass pasword -mapop set +desonly -crypto DES-CBC-CRC -ptype KRB5_NT_PRINCIPAL -mapuser domain\UserLogin
from the command promt I get:
Targeting domain controller: Host.domain.local
successfully mapped firewalllogin/HOSTNAME to UserLogin.
Password successfully set!
and a window appear:
Kerberos keytab tool has stopped working - Windows can check online for a solution to the problem.
Problem Details:
Problem signature:
Problem Event Name: APPCRASH
Application Name: ktpass.exe
Application Version: 5.2.3790.3959
Application Timestamp: 45d69729
Fault Module Name: ktpass.exe
Fault Module Version: 5.2.3790.3959
Fault Module Timestamp: 45d69729
Exception Code: c0000005
Exception Offset: 0000832e
OS Version: 6.0.6002.2.2.0.305.9
Locale ID: 4105
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I am running this command in a Windows Small Business Server 2008.
I have no clue whats happening? Can any please advise.
Thanks in advance.
Richard ChungHi Mohit,
Thank you for your reply. My KTpass.exe version is 5.2.3790.3959. and yes, I am running the the tool as admininstrator in command prompt.
Kerberos keytab tool has stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: ktpass.exe
Application Version: 5.2.3790.3959
Application Timestamp: 45d69729
Fault Module Name: ktpass.exe
Fault Module Version: 5.2.3790.3959
Fault Module Timestamp: 45d69729
Exception Code: c0000005
Exception Offset: 0000832e
OS Version: 6.0.6002.2.2.0.305.9
Locale ID: 4105
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160 -
Clone tool has stopped working properly, the sample area doesn't follow the target area?
Clone tool has stopped working properly, the sample area doesn't follow the target area?
I understand. I was very unhappy with Adobe when my PSE 11 stoped working properly. I had it for only about 6-7months before I updated my software on my imac and it all went downhill.... Then to add to that my Adobe account was hacked. Adobe never informed me of this situation. I heard through a friend that I should check to see if I was one of the very many who's online accounts were tampered with. I had to reset every single password and username for nearly 30 online accounts to avoid any further tampering with the hackers. And all Adobe suggested was for me to pay for an upgrade to PSE 12 which I did but wasnt very impressed to say the least ( i was on an online chat with them for over 2hours trying to get my PSE 11 issues solved to no avail). Then this sluggish performance starts happening again using the new version PSE 12?. I'm going to stay clear of adobe if I have the option to purchase similiar software from another supplier. I would and will encourage anyone else who has problems with there software to do the same. Older versions should work perfectly fine for ages. I wonder If Adobe is trying to get us all to pay for the monthly subscription option(s) to avoid having issues with older versions of their software. As the subscription option keeps you ontop of all the latest versions... I wouldn't put it past them.
All the best returned,
Ray -
Plug-in Registration Tool has stopped working
Hi all,
On Dynamics CRM 2015 Online, I have installed a Plugin Profiler using the Plugin Registration Tool provided in the SDK for CRM 2015.
When I start debugging using the profiler and Visual Studio 2013 the plugin profiler stops working with the error when reaching at the point of code with error. And actual exception is not showing. Any ideas how to resolve this?
ERROR MESSAGE:
[Window Title]
Plug-in Registration Tool
[Main Instruction]
Plug-in Registration Tool has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Debug] [Close program]
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pkHello Jochen,
I tried after executing the plugin registration tool as administrator. Still no difference.
Thanks.
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk
Maybe you are looking for
-
Error while opening work item in Inbox sbwp for verifcaion of right invoice
Hi, I am working on SAP workflow with IXOS. I faced a problem in opening the workitem when it came into the inbox. In nomal scenario when i click on the workitem under workflow folder in my inbox, it opens the attached document in document viewer, i
-
Adobe Acrobat Pro 9.1.3 will not convert web page to Pdf
While using Acrobat 9.1.3 Pro, I cannot convert web pages to PDF format. the output is garbled and text is cyrillic or backwards. Using Internet Explorer 7.0.5730.13
-
Multiple users need to see some documents in SQL table, PHP
Is there a way to serve up data for a user based on their group assignment? I have two SQL tables. The first one has the user login information (username, password, groupID note: multiple users can belong to same GroupID). The second table has the
-
Hi, u2022 My client is going for up gradation of EHP5 CWM(Catch weight management), if he implement in FI in which areas we have effect. He is asking that u201CValidate changes to GR/IR clearing u201C and u2022 Special attention will need to
-
Cannot get back to Touch Instruments
Hi - I'm new to iPad and GarageBand. Was toying around with it last night and after trying out the touch instrument browser I went into "My Songs" and checked out the demo song, but now I cannot get back to the instrument browser. I cannot find a bac