Tool palette missing after migrating

Hello
I just bought a MacBook Pro (10.7.5) and I used the migrate assistant to copy everything over from the iMac. It was great ... and i just finished a small project in Final Cut Pro (6.1) ... but its tool palette is missing on the MacBook.
I turned it off and on in the Windows menu, but still not there. I changed the display size in case it's hiding off the edge, but nope.
I'm a simplest and I really only use the pen tool and knife ... but it's inconvenient not having it there.
Any suggestions on how to get it back, other than reinstalling the program (don't really want to do this)?
Thank you
Elizabeth

Using Migation to move FCS from one Mac to another does not work and it will never run correctly. You will need to remove Final Cut using FCS Remover then re-instal properly using the original install discs.
FCS Remover

Similar Messages

  • Tool Palette issue after updating Photoshop CS5 to version 12.0.2.

    When leaving or hovering the mouse cursor over the Tool Palette in Photoshop usually a small window appears to indicate the name of the tool and keyboard shortcut. However, after updating Photoshop CS5 to version 12.0.2 the small window shows but it is now a blank space. I have uninstalled and re-installed Photoshop CS5 and updated again and this problem persists. Now I wish that I should not have updated from version 12.0.1. Do any other Photoshop CS5 users are seeing this problem?
    p.s The Tool-Stack window works fine, when clicking the mouse for a second, and tools are selectable.
    The operating software I am using is Windows XP Pro 32 bit.

    This is a known problem with the update, and Adobe is working on it.
    Please see the thread on tooltips, also current in this forum:  http://forums.adobe.com/thread/762392?tstart=0
    -Noel

  • Tools Palette issue after updating Photoshop CS5 to version 12.0.2

    After updating Photoshop CS5 to version 12.0.2 the Tool Palette is having an issue. Normally when leaving or hovering the mouse cursor on the Tool Palette in Photoshop a small window appears to indicate the name of the Tool and keyboard shortcut. Now this small window shows but the space is blank.
    I have uninstalled and re-installed Photoshop CS5 and again updated but this problem still persists. Now I wish that I should not have updated from Photoshop CS5 version 12.0.1. Do any Photoshop CS5 users have seen this bug with their product? Is it possible to downgrade Photoshop CS5 to version 12.0.1?
    p.s The Tool-Stack window, when clicking the mouse and holding for a second on the Tool Palette, opens and shows all the corresponding Tools that can be selected and to be used.
    I use Windows XP Professional 32 bits as operating software.

    This is a known problem with the update, and Adobe is working on it.
    Please see the thread on tooltips, also current in this forum:  http://forums.adobe.com/thread/762392?tstart=0
    -Noel

  • Copy to my calendar missing after migration Exchange 2010-2013

    Hi there,
    We have migrated our Exchangeserver from Exchange 2003 too 2010 and then too 2013.
    In Outlook 2007 (with Exchange 2003 and later 2010) we had a button in the 'New appointment window' called 'Copy to my Calander' When we made an appointment in a Public Calander.
    After migrating to Exchange 2013 the button is missing, but we're still using the Public folder (Calander).
    Is there a solution for this?

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Tool Palette missing in Paint

    Hi
    New to Director, problem is I have lost the Tool palette in
    the Paint window ?
    Help Please

    ukliz wrote:
    > Hi
    > New to Director, problem is I have lost the Tool palette
    in the Paint window ?
    >
    > Help Please
    Hi Ukliz,
    1. Open the Paint Window.
    2. While it is the active window go to the 'View' pulldown
    menu and select 'Paint
    Tools'
    regards
    Dean
    Director Lecturer / Consultant / Director Enthusiast
    http://www.fbe.unsw.edu.au/learning/director
    http://www.multimediacreative.com.au
    email: [email protected]

  • Why are some clips missing after migrating to my new Mac?

    My old Macbook Pro died so I got a new one and have migrated my data to the new one from a Time Machine backup. However, after doing this iMovie is telling me a lot of clips are missing. Many of them are still in tact, but in a lot of cases I see a message like: Missing File "clip-2012-09-13 07;52;06 (id)" is missing. Try reimporting the original source media. I'm using iMovie 10.0.6 and Yosemite (on both the old and new Mac).
    Can anybody tell me how I can fix this?
    Thanks

    If it matters, I have a Canon camcorder and imported the clips using a firewire cable. The external drive is connected via a second firewire cord to the other firewire port.

  • Help! App reg/licenses missing after migrating to new iMac.

    I just finished migrating to a new iMac (2007 2.16 GHz White Lucite -> 2008 2.83 GHz Aluminum). I used the Migration Assistant after starting up the new iMac to transfer everything. I chose "Transfer from another Mac" (which was actually my SuperDuper! backup on an external FW RAID). Everything seemed fine (I even rebooted first). I logged into my Admin account first and it looked the same. But after logging into my User account and trying to open my apps they were starting as though it was their first time, asking for SN and registration info. Safari has reverted from v4 to v3, Aperture wants SN, and iTunes can't open my library because it was created with a newer version, yet Mail worked fine. What happened? And more importantly, what should I do? I don't want to re-enter SN's and info and re-register my apps.
    I have both SuperDuper! and Time Machine backups. I was thinking to boot from SuperDuper! as Start Up Disk and then do a complete restore, or if necessary erase the Mac HD first (which I'd prefer not to). Will restoring the new iMac HD with the SD! backup from the older iMac cause any issues?
    Addendum:
    I just noticed in the System Profiler that OS X is 10.5.4, not 10.5.6. Why didn't it transfer/update the OS as well? Isn't it suppose to transfer everything? Why would I want to downgrade my OS X with a new iMac?
    Message was edited by: Sakahara
    Message was edited by: Sakahara

    I ended up using OS X disc to 'Restore System From Backup' from Time Machine backup. That returned the system back to almost an exact state as before, but a few apps were still asking for SN, and Mail wouldn't open because it had to reload messages. Strangely though, Aperture won't accept the SN now, whereas it did after the first migration transfer.
    Migrating to a new Mac is not as simple and painless as made out to be. At least not clearly enough. It was an all-dayer/nighter full of stress and frustration. Not something I expect from Mac, but a PC.
    Another after-effect from this is Time Machine doesn't see its backup now, even though it's there on the external drive. It showed backup failed and then after I reset/highlighted the correct drive it started backing up under a new folder/computer name. I deleted that but can't figure out how to make TM see the existing BU. This has been a lot of fun.

  • InDesign CC 2014 tool palette missing

    Mac Book Pro with 6 g ram and 2.4 i5 core OSX 10.9.5 - I recently installed Indesign CC 2014 from our team creative cloud and can open files but cannont edit since there are no tools available. no palettes! I unistalled all iterations of ID and reinstalled ID 2014 with  the same results I also installed without saving any preferences. I also tried changing work spaces as well as short cuts with to tools.
    Any suggestions would be appreciated.

    The most obvious question is have you tried Window > Tools?
    If trashing the prefs doesn't work (see Replace Your Preferences), then uninstall again, but this time run the cleaner tool before you reinstall: CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3

  • HT204350 Files missing after migration assistance transfer

    I used migration assistant to transfer files from my old to new mac mini.  After the transfer was complete, the files I transferred to my new mac disappeared from my new mac, including my hard drive icon.  But it shows that the hard drive space is taken up.  What happened and where are my files?

    Look for a new user account

  • Call logs are missing after migrating to VM

    We recently migrated CUCM 8.6.2 from physical server to VM. Phones are all fine, but some no longer update their Call Logs (i.e. Missing, Recieved, Placed). Doing a Factory reset does a fix for a single phone, but normal reset or reboot doesn't. Can someone think of the possible reason for this?

    Can you please try this for one phone check whether its work or not?
    ** Delete ITL file on the phone
    - Go to Settings
    - Security Configuration
    - Trust List
    - Unlock (*##)
    - Click on "more"
    - Erase ITL file (the phone will be reset by its own)
    Br,
    Nadeem 
    Please rate all useful post.

  • Input Node Palette missing after upgrade to 10.4 (international feature)

    One of my users used to use the "Input Node Palette" that was under the International flag icon in the top right hand corner of the screen. This was present in 10.3 but not in 10.4. Can someone tell me how to turn this on or what to use as a substitute.
    Thank you.

    Thank you. I did that but my user prefers/likes the Node Palette which is different than the other palettes (that is what she tells me). It does look different, I just don't know if it acts different.
    I should have posted this in another forum - sorry about that. Thank you for your suggestion.

  • Songs missing after migration

    I used the migration function to move all of my data from my laptop to desktop, wiped the laptop and sold it.  itunes tells me that certain song files "can't be found" including some I purchased on the itunes site.  I have autorized the new computer, but still am having issues.

    Hi dantehelg,
    Welcome to Apple Support Communities!
    If you have more than one Apple ID that you used to buy music in the past, you'll have to authorize the computer with the other Apple IDs too before you can re-download those purchases. The article below has other tips and suggestions that should help too.
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    -Jason

  • InDesign CS6 Fill Tool palette missing.

    Resetting the workspace doesn't help. Any ideas?

    Do that:
    Troubleshooting 101: Replace, or "trash" your InDesign preferences

  • Main icons are missing on Dreamweaver cs5.5 after migrating from one mac to another

    Can someone help me? My icons are missing after migrating dreamweaver cs5.5 using migration assistance on a mac. I have no idea how to fix this...

    Migration Assistant is not recommended for transferring DW to another system.
    Uninstall DW in full and do a fresh re-install of DW from the installer (either CD/ DVD or a .DMG file).

  • My tools palette has disappeared

    To say I am a novice at InDesign would be to insult most novices.  But I do put out a decent product knowing just what I need to know and bumbling my way through the rest.
    So today I am working and suddenly my tools palette disappears.  I closed the program, waited a bit, and then restarted it.  It is still missing.  I rebooted my maching (Win7).  No tools palette.  I went back to another project hoping I did something on this project that made it disappear and it would show up elsewhere.  Nope.
    I though that maybe it was just missing from my screen so I made the screen smaller (seeing lots of pages) hoping it had slid all the way to the left.  Nope.
    Nothing I do seems to bring it back.  Of course I first went into Windows and there it was checked.  I unchecked it and shut down.  Started up again and it had remained unchecked.  I checked it and my page shifted a bit to the right but still no tolls palette.
    Can anyone help me?
    Thanks,
    Kathie

    I might just have the solution or part of a solution. My work just upgraded to version CS4. When I opened InDesign, I had the same problem where I could not find the tools palette. I opened a file created in an older version which opened without a glitch. What I discovered is when the window for this file opened it "snapped" into a frame that covered over the palette. I kept checking and unchecking the "tools" under the Window menu to no avail until I resized my current document's window and ta-dah! There is was...
    I'm curious, for those using CS4 for the first time, does opening a document hide your tools palette? After I got the palette back, I closed out of the document to check if it will hide the palette again but it didn't. I did re-size the window so it may have "remembered" what size it should be... Anyway, I hope it helps somebody....

Maybe you are looking for

  • How can I upgrade my Mac G5's boot drive?

    Hi, I have a PowerMac G5 running 10.5.8... and just bought a new internal 1TB SATA I would like use as my new boot drive. What's the most simple method to do so? I have a copy of Data Rescue 3 that has a "clone" feature -- which I tried. It worked, b

  • IndexOutOfBounds exceltion when opening a workitem in non english user

    Hello, On an english user I perfectly open a workiten in the UWL, But if a change the language to NL, DE, FR, other than english, when I try to open a workitem I get a IndexOutOfBoundsException, This is happen with standard task of Leave Request (LEA

  • How to Call RFC from PortalService using a ServiceUser

    Hi, I have some code that calls an RFC using JCO. (I have other code I wrote using JCA to connect from a portlet, but that requires a Session and uses an IProfile) Our security team wants me to use a Serviceuser instead. But I can't seem to figure ou

  • Feature Request - Ability to organize content holder, media downloads, etc

    Are there any plans to add a feature to BC to allow admins/users to organize things like content holders, media downloads, news, etc? We would really like the ability to be able to tag these items (or something) and then search for these items in adm

  • ITunes search and use (libary) specific folder(s) only

    Hey, My iTunes libary contains a lot of files I didn't ask it to search for, I want it to only put songs in my libary in my "C:\Users\<username>\Music" folder. How do I make it proform this action? Thank you =) Daniel.