Tool presets keep showing up alphabetized.

I have a list of brushes in the Tool Presets. I go to the Preset Manager and organize them in an order that makes sense to me, then I Save the presets with a name in the Tools presets. Just to be sure, I save the workspace with a new name.
If I close PS and reopen it, the tools appear in the Tools Presets, but not in the order I saved them earlier. They are all in alpahbetical order again.
I've gone through this several times, and it seems I am doing it right. I must be missing a step somewhere.
This is on Windows 7, 64 Bit, Photoshop 5.
Any advice?
MJackson

I guess the link in the earlier thread answered it for me. Apparently, the user order cannot be saved in the Tool Presets, though they can be in the Brushes Presets.
I solved my issue by adding "Artist's" in front of the brushes I need near the top, like Artist's Round Chalk - Opaque.
Regular Brushes are in a groupling below the Mixer Brushes.
I'd love to see this changed in a future version of Photoshop.
M. Jackson

Similar Messages

Photoshop CC - Missing Tool Presets

I have just wasted over 2 hours with the adobe 'Customer Care' people trying to find out why I get the message 'No Tool Presets Defined for Current Tool' and this included them remote connecting to my iMac via 'TeamViewer'. The person concerned then sent me links to tutorials on the use of the Spot Healing Brush but they were no help whatsoever and CustomerCare have been unable to solve my problem and, to add insult to injury, the so-called 'care' expert, closed down our Chat without explanation. Fortunately their system has automatically sent a transcription of the chat.
Anyway, to explain the problem:
I opened an image (.dng) in Bridge which then automatically opens CameraRaw. I clicked on 'OpenImage' which then opens Photoshop. However, when I click any of the tools in the Tools Panel, the Spot Healing Brush as an example, I get the message "No Tools Preset Defined for Current Tool" so no sign of the Healing Brush, Patch, Content-Aware or Red Eye Tools. The Clone Stamp doesn't show Pattern Stamp tool, the Marquee tool only shows the Rectangular tool and so on. This applies whether I click or hover over the tool within the Tools Panel itself or when I click on the downward arrow in the Options Panel for the tool in question. A few of the tools do show some presets but not all of them.
Please please help
PS. Does anyone know how I can complain to Adobe about a very shoddy example of support?

I'm a windows user so I do not know the Adobe Photoshop environment on the Mac or the versions of Mac OS. The only suggestion I could make would then be try using Adobe Cleaner to clean off Photoshop then install Photoshop Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

ADOBE PREMIERE PRO CS4! BLACK SCREEN KEEPS SHOWING ON START UP?

Hi,
Could somene please help me? This is my first time using adobe premiere pro and it keeps showing a black screen after I click new project? Also lots of the tools above will not let me click on them? I have used other video software before and have never had this problem. Please help

Either:
FAQ:Why can't I click any buttons?, otherwise: Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Width tool presets drop down, extend the box

just wanted to extend the box of the width tool preset drop down. in the control panel.

Yes we can achieve this. But you need to use internal table in dropdownlist as show below:
Onintialization
 entry-name = 'IC'. entry-value = 'IC Text'.
 APPEND entry TO itab.
 entry-name = 'PM'. entry-value = 'PM Text'.
 APPEND entry TO itab.
Layout
 <htmlb:dropdownListBox id = "LIST"
 nameOfKeyColumn = "NAME"
 nameOfValueColumn = "VALUE"
 width = "300"
 selection = "<%= doc_type %>"
 onSelect = "DDLB1Event"
 table = "<%= itab %>" />
Page attribute:
entry TYPE IHTTPNVP
itab TYPE TIHTTPNVP
OnINputprocessing:
CALL METHOD REQUEST->GET_FORM_FIELD
 EXPORTING
 NAME = 'LIST'
 RECEIVING
 VALUE = doc_type.
delete itab where name = doc_type. " This will remove selected entry from Itab.
if doc_type = 'IC'
 entry-name = 'IC'. entry-value = 'IC Text'.
else.
 entry-name = 'PM'. entry-value = 'PM Text'.
endif.
insert entry to itab index 1.
* Reward each useful answer
Raja T

Tool Presets - resorts the tool order without permission

Does anyone know how to save a set of Tool Presets and have CS3 keep the tools in the order that I set in the Preset Manager?
I reported this as a bug over 2 years ago to Adobe, and they acknowledged the bug in CS2, but it STILL appears to be a bug now in CS3.
Unless I'm doing something wrong?
Thanks

Neil, yes. Just wishing...
What really needs to take place is for Adobe to spend 0.01% of its revenue LISTENING to users and developers.
Sigh...

Type tool preset changes after switching tools?

How can I keep my type tool preset from going back to the default after switching tools?
I have a type tool preset that I use and then I go to another tool to do something -when I switch back to the type tool I have to re-click on the preset to activate it again. How can I keep this preset active?

Reset your PS preferences (CMD+OPT+SHIFT) when you launch it.
The tools should hold their most recent setting after that.

Lines keep showing up

Vertical lines keep showing up on my screen, especially when I'm scrolling. The lines are black and cover the whole screen. It doesn't seem to do this with Internet Explorer though. I've tried several things, and I even tried disabling Extensions and nothing has worked.

Hi,
You can also try to disable hardware acceleration: '''Tools''' ('''Alt''' + '''T''') > '''Options '''> '''Advanced '''> '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]
[https://support.mozilla.org/en-US/kb/Options%20window Options]
[https://hacks.mozilla.org/2010/09/hardware-acceleration/ Hardware Acceleration]

Saving a Tool Preset

Hello
When adding a new tool preset, Photoshop CS6 used to place your new preset in your existing toolp presets panel in alphabetical order.
Lately, it stopped doing this - it just places the new preset at the bottom of the list, forcing me to go into the presets manager and then tediously dragging the new preset from the bottom of the list up into its proper alphabetically-ordered position. Doesn't sound like a big deal to most people I'm sure, but my tool presets list has several hundred presets, maybe even more than a thousand. So having to do this every time I add a new preset is becoming cumbersome.
My question is where did this all go wrong - it used to do it automatically, but stopped somewhere along the lines. Anyone else experience this problem?

In the Tool Preset menu (gear icon) do you have "Sort by Tool" checked on?
Gene

Tool Presets: how to delete or overwrite?

I'm trying to delete a Tool Preset by name. The usage would be something like this:
deleteToolPreset("favTool1");
saveToolPreset("favTool1");
It seems easy and obvious but its not working for me:
function deleteToolPreset(toolPresetName)
    var idDlt = charIDToTypeID( "Dlt " );
    var desc = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref = new ActionReference();
        var idtoolPreset = stringIDToTypeID( "toolPreset" );
        ref.putName( idtoolPreset, toolPresetName );
    desc.putReference( idnull, ref );
    executeAction( idDlt, desc, DialogModes.NO );
Photoshop doesn't seem to let you overwrite an existing preset. You have to delete it first and it seems the only way to delete it is to first select it and then delete it. By selecting the tool preset you want to delete, you lose the tools settings that you wanted to save in the first place. A vicious cycle.
Any help would be sooo much appreciated.
-alex

Photoshop doesn't seem to let you overwrite an existing preset.
But xtools does:
//@show include
//@includepath "/c/Program Files/Adobe/xtools;/Developer/xtools"
//@include "xlib/stdlib.js"
//@include "xlib/PresetsManager.jsx"
var toolsMgr = PresetsManager.getManager(PresetType.TOOL_PRESETS);
toosMgr.renameElement(oldName, newName);
-X

My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 5 won't turn on but when plugged into power source it keeps showing apple logo?

My iPhone 5 won't turn on at all and then when I plug it into a power source either into a plug socket or into my laptop with the USB cable it keeps showing start up screen with apple logo over and over again on a loop.
I have tried holding the top and front button together, this didn't work. I have also tried connecting to my laptop and following the reboot steps that I found on another discussion forum. Neither worked for me. The phone just won't reboot and it keeps continuing to loop the apple logo screen over and over without me touching anything.
The iPhone won't even connect to itunes and so itunes seems to not recognise my phone because its not even turning on (just continually apple logo screen appears for 5 seconds, goes to black screen and then repeats).
I don't know what is happening to it! Can anyone help? Is it a fault with the hardware or have I dont something to it? The next appointment at the genius bar for me is monday so I'm going to keep looking for any more recent ones until then but I really need to get it sorted before then so if anyone can help that would be great!
Thanks

Try a reset when your iPhone is plugged into the charger as you say it does not respond when not plugged in...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
See if it will charge after this.

I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
The help of a clear-thinking Apple fan would be greatly appreciated.
Many thanks.
From Ian in Paris, France

Ian
I worked it out.
Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
Go to your HD.
Go to Users.
Go to your House (home)
there should be a hidden Library folder there (it will be transparent)
Go to Mail in this folder
The next folder ( for me ) is V2
Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
Click on that and there should be a folder called recovered messages (server) . mbox
Click on that there a random numbered/lettered folder -> data
In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
It worked for me. No restarting or anything. And recovered file. GONE.
Started receiving and syncing mail again. Woohoo.
Best wishes.

My iPhone 3s keeps showing that there are updates from the ap store but when I try to update it says all apps are up to date. Also when I select purchased apps it just gives me a blank page and not a list as expected

My iPhone 3GS keeps showing I have app updates but when I go to
App Store It tells me all apps are up to date. Also when I select
purchased apps It just gives me a blank page.

Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

Problem with setting up new Ipad Air2:I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with thesame

I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with the same ID. Please help me if you have come across the same issue. Thank you!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Tool presets keep showing up alphabetized.

Similar Messages

Maybe you are looking for