Tool Report Design

Hi all,
Could you tell me any tools for design report layout or other way to design? Beside Quick Viewer, SAP Query, Report Painter/Writer, they can't group data and very complex.
Thank you!

Crystal Reports can be used to create html files which can be loaded into a java application. And it provides a C interface which can be accessed via JNI.
Given that I did that four(5?) years ago, it might have gotten easier.
I used the following search string via www.google.com
"Crystal Reports" +java
And the first page I looked at seemed to suggest that more support for java is now available.

Similar Messages

  • Web design reporter and Report designer is not working in SAP BI

    Hello,
    I am facing JAVA RFC error in Web reporting designing and reporting designer tools in BEx application. For more details please check the attachment in mail  Any one help me for this issue.
    Please check the my system details in the following
    SAP ECC 6.0 EHP 6 with ABAP stack
    SAP BI 740 with ABAP stack
    BO 4.1
    Thanks & regards,
    Surendra

    Hi,
    Check with basis team , either they have configured rfc connection properly or not.
    Refer below also:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&…
    Thanks.

  • To view reports in new page for each cutomer using Report Designer

    HI all
    I have a requirement to view the data (key figures) for each customer in a new page.
    I have created the same using the Report Designer tool.
    Now there is setting for this Group Header 'Customer' i have selected the option 'repeat group header on each page'
    still the query when generated, gives fine results for certain cases but not for all.
    like it will show the each customers in a fresh page for some pages , then in midst there would some 2-3 customers in the same page.
    There is no relation between these customers , they are same as the other customers, no difference at all.then i am not able to figure out the reason why it is behaving so odd.
    Thanks
    Ramesh

    Ramesh,
    right now there really is no way to solve what you are looking for.  There partial solutions, but you will not be able to force a page break in a dynamic report.
    Here is what I have faced, and what I have come up with so far:
    I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure.  I need to be able to re-use the header and the general report design with 6 reports.  Here is my solution:
    1. Create an outline of the report.  I did all the formatting by creating a report section for each page.  You can force page breaks between the pages.  Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
    2. Insert all you page breaks and do all the formatting.
    3. Insert an infoprovider.  Once in, you can just drag and drop the key figure cells into your formatted report.
    4. Create additional modification for formatting as needed.
    This fixes my problem (for now), but I had to do a lot of work to come up with this.  Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report.  I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
    The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
    I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
    good luck
    Pavel

  • How to know how many users uses Report Designer?

    Dear Experts,
    Somebody knows if it's possible to know how many users have made look ups in Report Designer on one period or how many modifications?
    Thanks in advance.

    Hi,
    If the cube is checked for Statistics, there is a option settings for BI Statistics under tools, then all the user related info is stored in Techincal Content Cubes. Based on TCT(technical Content Cubes), you need to create a report based on the requirement. From then we can know user log info for the particular queries.
    Hope this helped you
    Thanks
    PT

  • Bex Report Designer: Error while loading metadata

    hi experts,
    I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
    Error while loading metadata.
    Check the Query and portal settings.(but the query is working fine in Analyzer).
    and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
    when i double click the error its giving below error details.
    Diagnosis
    An error occurred in the BI components on the SAP J2EE Engine.
    System Response
    Procedure
    Contact your system administrator to have the error analyzed in detail.
    Procedure for System Administration
    Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
    The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
    If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
    could you plz suggest me how to rectify the problem.
    regards
    vadlamudi

    Hi vadlamudi
    The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
    1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
    2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
    Regards,
    Janine

  • CR4E plug-in   ERROR CONNECTIVITY  MS ACCESS DATABASE :data connection that isn't fully supported by this version of the Crystal Reports designer

    Post Author: arfetgas
    CA Forum: Data Connectivity and SQL
    Hi im trying to view a simple report , this report have some parameters from a MS Access database.I  configure  everything, The ODBCJDBC bridge, the dns System on Windows, etc... and the problem its  like this,  I connect the database, but the schema its empty  , i cant map, the dinamic parameters of my report, with my access database.I have this errors  : at same time 1. This report uses a data connection that isn't fully supported by this version of the Crystal Reports designer.  You can modify the report in the designer, but the following actions that access this connection will fail: Browse data, verify database, and report preview.  We recommend you set the datasource location to a JDBC or Java Result Set data source.  2. Java.lang.RuntimeException: WARNING: Blocked recursive attempt to close part com.businessobjects.crystalreports.integration.eclipse.jspeditor.CRJSPEditor while still in the middle of activating it    at org.eclipse.ui.internal.WorkbenchPage.closeEditors(WorkbenchPage.java:1247)    at org.eclipse.ui.internal.WorkbenchPage.closeEditor(WorkbenchPage.java:1367)    at org.eclipse.ui.internal.EditorPane.doHide(EditorPane.java:61)    at org.eclipse.ui.internal.PartStack.close(PartStack.java:543)    at org.eclipse.ui.internal.EditorStack.close(EditorStack.java:206)    at org.eclipse.ui.internal.PartStack$1.close(PartStack.java:122)    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:81)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276)    at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1)    at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$1.closeButtonPressed(DefaultTabFolder.java:67)    at org.eclipse.ui.internal.presentations.PaneFolder.notifyCloseListeners(PaneFolder.java:596)    at org.eclipse.ui.internal.presentations.PaneFolder$3.close(PaneFolder.java:189)    at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2159)    at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320)    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)    at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)    at org.eclipse.jface.window.Window.open(Window.java:796)    at org.eclipse.ui.texteditor.AbstractTextEditor.handleEditorInputChanged(AbstractTextEditor.java:4403)    at org.eclipse.ui.texteditor.StatusTextEditor.handleEditorInputChanged(StatusTextEditor.java:220)    at org.eclipse.ui.texteditor.AbstractTextEditor.sanityCheckState(AbstractTextEditor.java:4555)    at org.eclipse.ui.texteditor.StatusTextEditor.sanityCheckState(StatusTextEditor.java:210)    at org.eclipse.ui.texteditor.AbstractTextEditor.safelySanityCheckState(AbstractTextEditor.java:4533)    at org.eclipse.wst.sse.ui.StructuredTextEditor.safelySanityCheckState(StructuredTextEditor.java:2945)    at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.handleActivation(AbstractTextEditor.java:921)    at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.partActivated(AbstractTextEditor.java:879)    at org.eclipse.ui.internal.PartListenerList$1.run(PartListenerList.java:72)    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)    at org.eclipse.core.runtime.Platform.run(Platform.java:857)    at org.eclipse.ui.internal.PartListenerList.fireEvent(PartListenerList.java:57)    at org.eclipse.ui.internal.PartListenerList.firePartActivated(PartListenerList.java:70)    at org.eclipse.ui.internal.PartService.firePartActivated(PartService.java:73)    at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:171)    at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124)    at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115)    at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48)    at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113)    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)    at org.eclipse.core.runtime.Platform.run(Platform.java:857)    at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)    at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111)    at org.eclipse.ui.internal.PartService.firePartDeactivated(PartService.java:116)    at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:165)    at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56)    at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126)    at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3402)    at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:2946)    at org.eclipse.ui.internal.PartPane.requestActivation(PartPane.java:265)    at org.eclipse.ui.internal.EditorPane.requestActivation(EditorPane.java:98)    at org.eclipse.ui.internal.presentations.PresentablePart.setFocus(PresentablePart.java:191)    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:92)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:272)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.handleMouseDown(AbstractTabFolder.java:342)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder$3.mouseDown(AbstractTabFolder.java:79)    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:178)    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)    at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)    at java.lang.reflect.Method.invoke(Unknown Source)    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)    at org.eclipse.equinox.launcher.Main.run(Main.java:1173)!ENTRY com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Error loading file prueba.rpt!STACK 0java.lang.Exception: Error loading file prueba.rpt    at com.businessobjects.integration.eclipse.shared.EclipseLogger.logMessage(Unknown Source)    at com.businessobjects.integration.eclipse.shared.EclipseLogger.handleMessage(Unknown Source)    at com.businessobjects.integration.capabilities.logging.LogManager.message(Unknown Source)    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateOneFile(Unknown Source)    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validate(Unknown Source)    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateInJob(Unknown Source)    at org.eclipse.wst.validation.internal.operations.ValidatorJob.run(ValidatorJob.java:75)    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in Provider:.... Business Objects!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in name:.... Crystal Reports Java Development Tools!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in ID:.... com.businessobjects.crystalreports.integration.eclipse!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Version:.... 1.0.4.v1094!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE The error was detected in com.businessobjects.crystalreports.integration.eclipse  Please PEOPLE OF BUSINESS OBJECTS  ,  I need some support , I think the problem its in your plug in09 April 2008 , let me how much time i need to wait Your support , maybe , ill try  jasper Reports, or Birth, it depends on You people of BO  any req  -
    >   [email protected] thanks to people  that can help ...           

    Post Author: arfetgas
    CA Forum: Data Connectivity and SQL
    Hi im trying to view a simple report , this report have some parameters from a MS Access database.I  configure  everything, The ODBCJDBC bridge, the dns System on Windows, etc... and the problem its  like this,  I connect the database, but the schema its empty  , i cant map, the dinamic parameters of my report, with my access database.I have this errors  : at same time 1. This report uses a data connection that isn't fully supported by this version of the Crystal Reports designer.  You can modify the report in the designer, but the following actions that access this connection will fail: Browse data, verify database, and report preview.  We recommend you set the datasource location to a JDBC or Java Result Set data source.  2. Java.lang.RuntimeException: WARNING: Blocked recursive attempt to close part com.businessobjects.crystalreports.integration.eclipse.jspeditor.CRJSPEditor while still in the middle of activating it    at org.eclipse.ui.internal.WorkbenchPage.closeEditors(WorkbenchPage.java:1247)    at org.eclipse.ui.internal.WorkbenchPage.closeEditor(WorkbenchPage.java:1367)    at org.eclipse.ui.internal.EditorPane.doHide(EditorPane.java:61)    at org.eclipse.ui.internal.PartStack.close(PartStack.java:543)    at org.eclipse.ui.internal.EditorStack.close(EditorStack.java:206)    at org.eclipse.ui.internal.PartStack$1.close(PartStack.java:122)    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:81)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276)    at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1)    at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$1.closeButtonPressed(DefaultTabFolder.java:67)    at org.eclipse.ui.internal.presentations.PaneFolder.notifyCloseListeners(PaneFolder.java:596)    at org.eclipse.ui.internal.presentations.PaneFolder$3.close(PaneFolder.java:189)    at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2159)    at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320)    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)    at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)    at org.eclipse.jface.window.Window.open(Window.java:796)    at org.eclipse.ui.texteditor.AbstractTextEditor.handleEditorInputChanged(AbstractTextEditor.java:4403)    at org.eclipse.ui.texteditor.StatusTextEditor.handleEditorInputChanged(StatusTextEditor.java:220)    at org.eclipse.ui.texteditor.AbstractTextEditor.sanityCheckState(AbstractTextEditor.java:4555)    at org.eclipse.ui.texteditor.StatusTextEditor.sanityCheckState(StatusTextEditor.java:210)    at org.eclipse.ui.texteditor.AbstractTextEditor.safelySanityCheckState(AbstractTextEditor.java:4533)    at org.eclipse.wst.sse.ui.StructuredTextEditor.safelySanityCheckState(StructuredTextEditor.java:2945)    at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.handleActivation(AbstractTextEditor.java:921)    at org.eclipse.ui.texteditor.AbstractTextEditor$ActivationListener.partActivated(AbstractTextEditor.java:879)    at org.eclipse.ui.internal.PartListenerList$1.run(PartListenerList.java:72)    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)    at org.eclipse.core.runtime.Platform.run(Platform.java:857)    at org.eclipse.ui.internal.PartListenerList.fireEvent(PartListenerList.java:57)    at org.eclipse.ui.internal.PartListenerList.firePartActivated(PartListenerList.java:70)    at org.eclipse.ui.internal.PartService.firePartActivated(PartService.java:73)    at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:171)    at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124)    at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115)    at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48)    at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113)    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)    at org.eclipse.core.runtime.Platform.run(Platform.java:857)    at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)    at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111)    at org.eclipse.ui.internal.PartService.firePartDeactivated(PartService.java:116)    at org.eclipse.ui.internal.PartService.setActivePart(PartService.java:165)    at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56)    at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126)    at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3402)    at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:2946)    at org.eclipse.ui.internal.PartPane.requestActivation(PartPane.java:265)    at org.eclipse.ui.internal.EditorPane.requestActivation(EditorPane.java:98)    at org.eclipse.ui.internal.presentations.PresentablePart.setFocus(PresentablePart.java:191)    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:92)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:272)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.handleMouseDown(AbstractTabFolder.java:342)    at org.eclipse.ui.internal.presentations.util.AbstractTabFolder$3.mouseDown(AbstractTabFolder.java:79)    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:178)    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)    at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)    at java.lang.reflect.Method.invoke(Unknown Source)    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)    at org.eclipse.equinox.launcher.Main.run(Main.java:1173)!ENTRY com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Error loading file prueba.rpt!STACK 0java.lang.Exception: Error loading file prueba.rpt    at com.businessobjects.integration.eclipse.shared.EclipseLogger.logMessage(Unknown Source)    at com.businessobjects.integration.eclipse.shared.EclipseLogger.handleMessage(Unknown Source)    at com.businessobjects.integration.capabilities.logging.LogManager.message(Unknown Source)    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateOneFile(Unknown Source)    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validate(Unknown Source)    at com.businessobjects.crystalreports.integration.eclipse.wtp.CrystalReportsValidator.validateInJob(Unknown Source)    at org.eclipse.wst.validation.internal.operations.ValidatorJob.run(ValidatorJob.java:75)    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in Provider:.... Business Objects!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in name:.... Crystal Reports Java Development Tools!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Plug-in ID:.... com.businessobjects.crystalreports.integration.eclipse!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE Version:.... 1.0.4.v1094!SUBENTRY 1 com.businessobjects.crystalreports.integration.eclipse 4 4 2008-04-02 15:30:13.788!MESSAGE The error was detected in com.businessobjects.crystalreports.integration.eclipse  Please PEOPLE OF BUSINESS OBJECTS  ,  I need some support , I think the problem its in your plug in09 April 2008 , let me how much time i need to wait Your support , maybe , ill try  jasper Reports, or Birth, it depends on You people of BO  any req  -
    >   [email protected] thanks to people  that can help ...           

  • BI 7.0: Report Designer / WAD Front-End Problems

    Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
    I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
    I'm getting following errors when i try to execute with new version of Business Explorer.
    1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
    this query works fine in BEx with New version as well.
    2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
    I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
    Is there any setting or configuration files i should change?
    i searched in OSS notes for these kind of errors, but i couldnt not find any
    please let me know as its urgent.
    thanks in advance..
    Deepak Kunavarapu

    Hi,
    we're running NW2004s, BI 7.0 SP06.
    I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
    iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
    Exception id: 11:02_16/02/06_0017_46228450
    See the details for the exception ID in the log file
    Do I need the integrate an platform_add_on? Does someone get the same errors?
    Thanks in adavance.
    Benjamin Herrmann

  • Report designer

    Hi Experts,
    Good day!
    i ineserted the query in report designer and would like to the execute the report i am following these steps.iam executing the after the dataprovider option in menu bar in report designer is it correct or i need to go for portal to see the data.but when i executig in report designer this is messages has been displaying.Can any suggested this issue and highly thankful to u kindly do this.
    Regards
    Rk
    Web Item Report Error
    Version number of report is too high
         This report Web item can display reports with version number 2.3 or lower. This report has version number 2.4
    To display this report, use a newer version of the report Web item
    Contact your system administrator. This error was recorded

    Hi Rama,
    Yes TA RSRT works only for queries. I meant to check your Query which serves as data provider for Report.
    According your original error I would say you still facing this issue because of some GUI version inconsistency. Still check if you are running the newest version of GUI and BW its components.
    More over check if your URL (between BW back end and portal) is being generated correctly as per note:
    947148 - How to check URL generation for BI BEx Frontend Tools
    BR
    m./

  • Report Designer - error message and variable

    Hi All,
    Who has already experience with the formatted report (Report Designer)?.
    We work with SAP GUI 640.
    I have the following problems with the report designer.:
    1.) If I even execute the report designer, I receive the following error message:
    <b>Web Item Report Error
           Error while processing the dynamic report section with the name " REP_TEST_1"
           While processing the dynamic report section with the name "REP_TEST_1", this 
           error occured:
           Characteristic SDB2_IO1_F9 not found on axis "ROW" of data
           provider  "SDB2_IO1"</b>
    I`ve already checked the Query and the InfoSet on this the Query was built. There are no mistakes! The InfoObject is in the row.
    With 2 other ones new defined Queries I receive the same error message, only with another info object.
    2.) If I executing the report designer not all variables are available.
         How can I change this?
    I`m thanks for every information and hope that Somebody can help me.
    regards,
    Wolfgang

    Hello Nagesh,
    1.) yes, I have one structure in the column.
    2.) That`s right what you say. This tool is very tricky!
         I`ve never changed the query. If I executing the report designer there show me one
         variable, but I have defined four in the query.
         So, what can I do to solve this problem?
    Thanks for your help.
    Best regards,
    Wolfgang

  • BI 7.0 Report Designer

    Has anyone any info on whether one can use the new report designer with BW 3.5? Is it a stand alone installation such as the WAD and the QAD?The formatting features of this tool are going to be very useful
    Cheers
    Anand

    Hi Anand,
    As per SAP:
    To ensure that existing customer scenarios can continue to be edited, in addition to the new tools, the tools from SAP NetWeaver ‘04 will also be delivered.
    These tools from SAP NetWeaver ‘04 are changed so that it is possible to work with these tools in connection with the new BI Server as well. This ensures that the previous functions will continue to be supported.
    New functions, such as BI-Integrated Planning and Enterprise Reporting, are only possible with the new tools. Objects that were created with the new tools can no longer be edited with the tools from SAP NetWeaver ‘04.
    The transition to the new tools will be done as needed. Conversion (if possible) occurs when the previous objects are opened in the new tools. This enables transition on an as-needed basis.
    The recommendation is to make the change step by step, because further new features will only be made for the new tools.
    Hope this helps...

  • 9iDS Release 2 Report Designer Crashes

    I have had numerous crashes over the past few weeks using this tool. As a background, I now have about 25 reports. Sometimes, I go into each one and "tweak" the report to change parameter sizes, layout, footer, etc. I "hand" edit some of these because I never seem to be able to re-load the template without some error. I don't know the tool very well, but, it's got a lot of great features. If it didn't crash or hang, numerous times, it would be great. One morning, recently, I was trying to update all the reports (22 of them) and print a sample page for my customer. I was ensuring the logo was the right one, the page footer was right, etc. I recieved no less than 10 crashes, forcing a restart of the tool each time. Needless to say, I wasted a lot of time doing that and wasn't able to go through all 22 reports I am running under Windows 2000 SP2 (and also under Windows XP Pro, SP1). This is both before and after applying 9.0.2.0.4 patch. Note, now that I know how to create templates, the logo, footer, etc issues are really not the problem, rather the crashes.
    Sorry for the long list here in one message, but it seems to be large pattern and can be frustrating at times.
    Template "Reapplication" issues:
    1) Reapplying self-made template after only changing font and font size in template to make it smaller: I get a "No column is selected in group 'my group name'. Each report produces a different result, but that's the error message -- actually, I just tested this again. I don't even have to try to open re-apply the template specifically. I open the report wizard and click finish and get this, no matter what I do in the wizard. Is that the only way to reapply the template (especially, since I only want to get the font changes and color changes).
    2) Clicking OK to the above error OFTEN (most of the time), produces "Instruction at 0x64e39295 referenced memory at 0x8b501045. The memory could not be read. In some cases, this happens after I select cancel in the reports wizard, when I received the error #1 above.
    Because I don't understand problem #1 very well and because I frequently receive error #2, I end up opening the "old" report, copying the SQL query, closing the "old" report and generating a new report, using the template and then re-sizing the columns of the report. If someone could help with #1, that would be most helpful. That may or may not prevent the errors below. Most of my reports are "paper and web layout" and "group left" with 2 or 3 levels of groups, if that makes a difference. Also, all of my queries have lexical parameter "where_clause", allowing dynamic augmenting of where_clause.
    3) The pattern of operations is: open old report, Grab SQL, close old report, generate new report via reports wizard, make report look right (fix column widths, make count columns right justified and displayed with "0,0" formatting, insert bookmarks, update user_parameter where_clause (see below) to be 4,000 characters). Save as and pick old name, when complete, save report, close report and open next report. I get through 2, 3 or 4 reports and then I get a crash. There are a two errors that I consistently see:
    a) During open of report: XML Parser failure, then the crash
    b) Unable to load string resource, then crash.
    c) During close of report, The instruction at 0x64af3d4f referenced memory at 0x00001f55. The memory could not be read.
    4) the template has user parameter defined "where_clause" 4,000 characters. I thought the template would supply that, but every time the reports wizard takes my query with the &where_clause, it resets the parameter size to 40 characters. I think that's because I'm seeing the message: Note: the query Q_1 has created the lexical parameter(s) 'where_clause', and I think that's overriding my template because at this point in the wizard I haven't even picked my template.
    5) Alt-tabbing away from Reports back and forth (while creating this message, in fact), I have received the following twice while in reports wizard, after getting the exact text of the lexical parameter dialog mentioned above. The error: "The instruction 0x65134268 referenced memory at 0x00000044. The memory could not be read.
    I hope these issues will be resolved in the near future. This is a great reporting tool, but with these kinds of errors, it's frustrating to use.
    Regards,
    Jeff

    Hi Jeff,
    Issue #1 occurs because of the report wizard. When you need to make a change, not the entire report, you should not use the wizard, use the Layout editor instead, in your case you can open the report design in the layout editor to change the font size/color of the fields then run the report and save it.
    The wizard, when invoked, will start the whole new report design and expect new selections for the design, in your case, it expects you to select the fields to be displayed in the group(s) again, that is why you got the error, and I belive this error is the cause to other errors. You can test to see in the wizard, after you apply the new template don't click Finish yet, but go to the Group and Field tabs you will see . Even after you select the fields for the group when you run you will see that the report has new layout which looks completely different from the previous layout.
    Good luck.

  • Dynamic Filter Display in Report Designer

    Hi All,
    We have implemented a new BI reporting tool and are using Report Designer for the output format. The problem is that we cannot see any dynamic filters or navigational level when printing as RD takes it back to the original format. To overcome this issue, we have given the same query with the variable selection so that RD always prints the variable selection but this has reduced performance.
    Anyone with ideas to overcome this situation or any workarounds will be appreciated.

    thanks Ajeet ,
    But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
    Thnks . please advice.
    Regards

  • Use of Grid in crystal report designer

    Hello,
    I have a simple question in regards to data grid in crystal report designer. Crystal report designer has a capability to show grid in both design and preview mode, can we make use of any other grid in crystal, how can I make my report look more professional like the text box alignment and placed objects based on using grids?

    I am confused as to what you are asking.  You can align text boxes and lines/linear boxes using the grid in the report design tool just like other report objects.  You can achieve some very crisp looking report designs this way.  There are also tools available when you right-click one or more objects to size and/or align those objects within the page.
    Fuskie
    Who notes you can also change the spacing between guidelines and grid points to provide more control over layout...

  • Text Variables in Report Designer

    We are creating some formatted reports in BI 7.0 using the Report Designer tool. One of the requirements is that when the report is flitered by a certain characteristic, say for e.g. Country = 'DE', the text associated with the country e.g. 'Germany' should be populated in the header of the report. Does anybody know if variable texts are supported in Report Designer ?
    Regards
    Viraj

    The service pack fixed this issue

  • Report Designer problem

    Hi Experts,
    I am trying to open a query in report designer tool in new GUI. but it showing following error.
      "Query(view)definition cannot be retrieved from portal.
       please try again or check query and portal setup"
    "Exception in method process function"
    I am not able to work with any of the queries for report designing.
    Help me out of this please
    Thanks in advance
    kalyan

    Make sure the BEX Web set up for the JAVA stack is done as per oss note 917950.
    The Report Designer require the Portal runtime on the JAVA Stack.
    Thanks.

Maybe you are looking for

  • Date formatting on updateable report

    I have an updateable report with a date column. I would like the user to be able to use mm/dd/rrrr format. Is this possible? Thanks

  • Cells Appearing Black in Report Designer

    Hi Guys, I have an issue here! When I open a report in Report Designer, all cells are coming with black background. When I click on each cell, then I am able to see the cell content with original formatting. I have checked with all cell format settin

  • Plays on only 1 car speaker

    My wife's iPhone 5c only plays through the right speakers in our 2014 Toyota Prius, whether through Bluetooth or USB.  My iPhone 5c works great.  Anyone have a similar situation?

  • EEWB for table fields

    Hi experts, Iam working on CRM 2007 web ui. I added table fields to BUPA using EEWB. I did postprocessing executions to enable on WEB UI. Execute the postprocessing step, enter the component name, and double-click the view for the overview page. On t

  • Need keyboard short cuts document

    went to muse tutorial page it lists short cuts for mac and pc both links go to mac short cuts what up wit dat?